From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: jeff@garzik.org, netdev@vger.kernel.org, gospo@redhat.com
Subject: [PATCH v4] ethtool: Add direct access to ops->get_sset_count
Date: Thu, 04 Mar 2010 00:51:50 -0800 [thread overview]
Message-ID: <20100304085054.4471.44679.stgit@localhost.localdomain> (raw)
From: Jeff Garzik <jgarzik@redhat.com>
This patch is an alternative approach for accessing string
counts, vs. the drvinfo indirect approach. This way the drvinfo
space doesn't run out, and we don't break ABI later.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
include/linux/ethtool.h | 17 +++++++++--
net/core/ethtool.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 86 insertions(+), 3 deletions(-)
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index cca1c3d..f6f961f 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -253,6 +253,17 @@ struct ethtool_gstrings {
__u8 data[0];
};
+struct ethtool_sset_info {
+ __u32 cmd; /* ETHTOOL_GSSET_INFO */
+ __u32 reserved;
+ __u64 sset_mask; /* input: each bit selects an sset to query */
+ /* output: each bit a returned sset */
+ __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits
+ in sset_mask. One bit implies one
+ __u32, two bits implies two
+ __u32's, etc. */
+};
+
enum ethtool_test_flags {
ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */
ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */
@@ -606,9 +617,9 @@ struct ethtool_ops {
#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
#define ETHTOOL_RESET 0x00000034 /* Reset hardware */
-
-#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
-#define ETHTOOL_GRXNTUPLE 0x00000036 /* Get n-tuple filters from device */
+#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE 0x00000036 /* Get n-tuple filters from device */
+#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 0f2f821..70075c4 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -214,6 +214,10 @@ static noinline int ethtool_get_drvinfo(struct net_device *dev, void __user *use
info.cmd = ETHTOOL_GDRVINFO;
ops->get_drvinfo(dev, &info);
+ /*
+ * this method of obtaining string set info is deprecated;
+ * consider using ETHTOOL_GSSET_INFO instead
+ */
if (ops->get_sset_count) {
int rc;
@@ -240,6 +244,71 @@ static noinline int ethtool_get_drvinfo(struct net_device *dev, void __user *use
/*
* noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
*/
+static noinline int ethtool_get_sset_info(struct net_device *dev,
+ void __user *useraddr)
+{
+ struct ethtool_sset_info info;
+ const struct ethtool_ops *ops = dev->ethtool_ops;
+ u64 sset_mask;
+ int i, idx = 0, n_bits = 0, ret, rc;
+ u32 *info_buf = NULL;
+
+ if (!ops->get_sset_count)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&info, useraddr, sizeof(info)))
+ return -EFAULT;
+
+ /* store copy of mask, because we zero struct later on */
+ sset_mask = info.sset_mask;
+ if (!sset_mask)
+ return 0;
+
+ /* calculate size of return buffer */
+ for (i = 0; i < 64; i++)
+ if (sset_mask & (1ULL << i))
+ n_bits++;
+
+ memset(&info, 0, sizeof(info));
+ info.cmd = ETHTOOL_GSSET_INFO;
+
+ info_buf = kzalloc(n_bits * sizeof(u32), GFP_USER);
+ if (!info_buf)
+ return -ENOMEM;
+
+ /*
+ * fill return buffer based on input bitmask and successful
+ * get_sset_count return
+ */
+ for (i = 0; i < 64; i++) {
+ if (!(sset_mask & (1ULL << i)))
+ continue;
+
+ rc = ops->get_sset_count(dev, i);
+ if (rc >= 0) {
+ info.sset_mask |= (1ULL << i);
+ info_buf[idx++] = rc;
+ }
+ }
+
+ ret = -EFAULT;
+ if (copy_to_user(useraddr, &info, sizeof(info)))
+ goto out;
+
+ useraddr += offsetof(struct ethtool_sset_info, data);
+ if (copy_to_user(useraddr, info_buf, idx * sizeof(u32)))
+ goto out;
+
+ ret = 0;
+
+out:
+ kfree(info_buf);
+ return ret;
+}
+
+/*
+ * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
+ */
static noinline int ethtool_set_rxnfc(struct net_device *dev, void __user *useraddr)
{
struct ethtool_rxnfc cmd;
@@ -1471,6 +1540,9 @@ int dev_ethtool(struct net *net, struct ifreq *ifr)
case ETHTOOL_GRXNTUPLE:
rc = ethtool_get_rx_ntuple(dev, useraddr);
break;
+ case ETHTOOL_GSSET_INFO:
+ rc = ethtool_get_sset_info(dev, useraddr);
+ break;
default:
rc = -EOPNOTSUPP;
}
next reply other threads:[~2010-03-04 8:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-04 8:51 Jeff Kirsher [this message]
2010-03-04 13:23 ` [PATCH v4] ethtool: Add direct access to ops->get_sset_count Jeff Garzik
2010-03-05 22:00 ` David Miller
2010-03-04 14:26 ` Ben Hutchings
2010-03-04 18:21 ` [PATCH] " Jeff Garzik
2010-03-05 22:00 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100304085054.4471.44679.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=jeff@garzik.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).