From: akpm@linux-foundation.org
To: isdn@linux-pingi.de
Cc: netdev@vger.kernel.org, akpm@linux-foundation.org,
imunsie@au.ibm.com, mac@melware.de, sgayda2@uiuc.edu
Subject: [patch 3/3] i4l: change magic numbers in Eicon DIVA ISDN driver to symbolic names
Date: Thu, 11 Mar 2010 14:07:25 -0800 [thread overview]
Message-ID: <201003112207.o2BM7PlG013464@imap1.linux-foundation.org> (raw)
From: Ian Munsie <imunsie@au.ibm.com>
Replace references to the '20' magic number found throughout the Eicon
ISDN driver for the length of the station_id field in the T30_INFO struct
with the T30_MAX_STATION_ID_LENGTH symbolic constant.
Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
Cc: Armin Schindler <mac@melware.de>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Stoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/isdn/hardware/eicon/message.c | 32 ++++++++++++------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff -puN drivers/isdn/hardware/eicon/message.c~i4l-change-magic-numbers-in-eicon-diva-isdn-driver-to-symbolic-names drivers/isdn/hardware/eicon/message.c
--- a/drivers/isdn/hardware/eicon/message.c~i4l-change-magic-numbers-in-eicon-diva-isdn-driver-to-symbolic-names
+++ a/drivers/isdn/hardware/eicon/message.c
@@ -2754,7 +2754,7 @@ static byte connect_b3_req(dword Id, wor
for (i = 0; i < w; i++)
((T30_INFO *)(plci->fax_connect_info_buffer))->station_id[i] = fax_parms[4].info[1+i];
((T30_INFO *)(plci->fax_connect_info_buffer))->head_line_len = 0;
- len = offsetof(T30_INFO, station_id) + 20;
+ len = offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH;
w = fax_parms[5].length;
if (w > 20)
w = 20;
@@ -2892,7 +2892,7 @@ static byte connect_b3_res(dword Id, wor
&& (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_ENABLE_NSF)
&& (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_NEGOTIATE_RESP))
{
- len = offsetof(T30_INFO, station_id) + 20;
+ len = offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH;
if (plci->fax_connect_info_length < len)
{
((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0;
@@ -3802,7 +3802,7 @@ static byte manufacturer_res(dword Id, w
break;
}
ncpi = &m_parms[1];
- len = offsetof(T30_INFO, station_id) + 20;
+ len = offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH;
if (plci->fax_connect_info_length < len)
{
((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0;
@@ -6830,7 +6830,7 @@ static void nl_ind(PLCI *plci)
if(((T30_INFO *)plci->NL.RBuffer->P)->station_id_len)
{
plci->ncpi_buffer[len] = 20;
- for (i = 0; i < 20; i++)
+ for (i = 0; i < T30_MAX_STATION_ID_LENGTH; i++)
plci->ncpi_buffer[++len] = ((T30_INFO *)plci->NL.RBuffer->P)->station_id[i];
}
if (((plci->NL.Ind & 0x0f) == N_DISC) || ((plci->NL.Ind & 0x0f) == N_DISC_ACK))
@@ -6844,7 +6844,7 @@ static void nl_ind(PLCI *plci)
if ((plci->requested_options_conn | plci->requested_options | a->requested_options_table[plci->appl->Id-1])
& ((1L << PRIVATE_FAX_SUB_SEP_PWD) | (1L << PRIVATE_FAX_NONSTANDARD)))
{
- i = offsetof(T30_INFO, station_id) + 20 + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len;
+ i = offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len;
while (i < plci->NL.RBuffer->length)
plci->ncpi_buffer[++len] = plci->NL.RBuffer->P[i++];
}
@@ -8400,7 +8400,7 @@ static word add_b23(PLCI *plci, API_PARS
}
}
/* copy station id to NLC */
- for(i=0; i<20; i++)
+ for(i=0; i < T30_MAX_STATION_ID_LENGTH; i++)
{
if(i<b3_config_parms[2].length)
{
@@ -8411,29 +8411,29 @@ static word add_b23(PLCI *plci, API_PARS
((T30_INFO *)&nlc[1])->station_id[i] = ' ';
}
}
- ((T30_INFO *)&nlc[1])->station_id_len = 20;
+ ((T30_INFO *)&nlc[1])->station_id_len = T30_MAX_STATION_ID_LENGTH;
/* copy head line to NLC */
if(b3_config_parms[3].length)
{
- pos = (byte)(fax_head_line_time (&(((T30_INFO *)&nlc[1])->station_id[20])));
+ pos = (byte)(fax_head_line_time (&(((T30_INFO *)&nlc[1])->station_id[T30_MAX_STATION_ID_LENGTH])));
if (pos != 0)
{
if (CAPI_MAX_DATE_TIME_LENGTH + 2 + b3_config_parms[3].length > CAPI_MAX_HEAD_LINE_SPACE)
pos = 0;
else
{
- nlc[1 + offsetof(T30_INFO, station_id) + 20 + pos++] = ' ';
- nlc[1 + offsetof(T30_INFO, station_id) + 20 + pos++] = ' ';
+ nlc[1 + offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + pos++] = ' ';
+ nlc[1 + offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + pos++] = ' ';
len = (byte)b3_config_parms[2].length;
if (len > 20)
len = 20;
if (CAPI_MAX_DATE_TIME_LENGTH + 2 + len + 2 + b3_config_parms[3].length <= CAPI_MAX_HEAD_LINE_SPACE)
{
for (i = 0; i < len; i++)
- nlc[1 + offsetof(T30_INFO, station_id) + 20 + pos++] = ((byte *)b3_config_parms[2].info)[1+i];
- nlc[1 + offsetof(T30_INFO, station_id) + 20 + pos++] = ' ';
- nlc[1 + offsetof(T30_INFO, station_id) + 20 + pos++] = ' ';
+ nlc[1 + offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + pos++] = ((byte *)b3_config_parms[2].info)[1+i];
+ nlc[1 + offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + pos++] = ' ';
+ nlc[1 + offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + pos++] = ' ';
}
}
}
@@ -8444,7 +8444,7 @@ static word add_b23(PLCI *plci, API_PARS
((T30_INFO *)&nlc[1])->head_line_len = (byte)(pos + len);
nlc[0] += (byte)(pos + len);
for (i = 0; i < len; i++)
- nlc[1 + offsetof(T30_INFO, station_id) + 20 + pos++] = ((byte *)b3_config_parms[3].info)[1+i];
+ nlc[1 + offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH + pos++] = ((byte *)b3_config_parms[3].info)[1+i];
} else
((T30_INFO *)&nlc[1])->head_line_len = 0;
@@ -8472,7 +8472,7 @@ static word add_b23(PLCI *plci, API_PARS
fax_control_bits |= T30_CONTROL_BIT_ACCEPT_SEL_POLLING;
}
len = nlc[0];
- pos = offsetof(T30_INFO, station_id) + 20;
+ pos = offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH;
if (pos < plci->fax_connect_info_length)
{
for (i = 1 + plci->fax_connect_info_buffer[pos]; i != 0; i--)
@@ -8524,7 +8524,7 @@ static word add_b23(PLCI *plci, API_PARS
}
PUT_WORD(&(((T30_INFO *)&nlc[1])->control_bits_low), fax_control_bits);
- len = offsetof(T30_INFO, station_id) + 20;
+ len = offsetof(T30_INFO, station_id) + T30_MAX_STATION_ID_LENGTH;
for (i = 0; i < len; i++)
plci->fax_connect_info_buffer[i] = nlc[1+i];
((T30_INFO *) plci->fax_connect_info_buffer)->head_line_len = 0;
_
next reply other threads:[~2010-03-11 22:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-11 22:07 akpm [this message]
2010-03-15 22:48 ` [patch 3/3] i4l: change magic numbers in Eicon DIVA ISDN driver to symbolic names David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201003112207.o2BM7PlG013464@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=imunsie@au.ibm.com \
--cc=isdn@linux-pingi.de \
--cc=mac@melware.de \
--cc=netdev@vger.kernel.org \
--cc=sgayda2@uiuc.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).