From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Kirsher Subject: [net-2.6 PATCH 1/2] ixgbe: Priority tag FIP frames Date: Wed, 24 Mar 2010 15:45:00 -0700 Message-ID: <20100324224500.6653.28216.stgit@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Cc: netdev@vger.kernel.org, gospo@redhat.com, Robert Love , Chris Leech , Jeff Kirsher To: davem@davemloft.net Return-path: Received: from qmta14.emeryville.ca.mail.comcast.net ([76.96.27.212]:48673 "EHLO qmta14.emeryville.ca.mail.comcast.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750826Ab0CXWpV (ORCPT ); Wed, 24 Mar 2010 18:45:21 -0400 Sender: netdev-owner@vger.kernel.org List-ID: From: Robert Love Currently FIP (FCoE Initialization Protocol) frames are going untagged. This causes various problems with FCFs (switches) that have negotiated a priority over dcbx. This patch tags FIP frames with the same priority as the FCoE frames. Signed-off-by: Robert Love Signed-off-by: Chris Leech Signed-off-by: Jeff Kirsher --- drivers/net/ixgbe/ixgbe_main.c | 26 +++++++++++++++++--------- 1 files changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index a9147e5..997d997 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5628,7 +5628,8 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb) #ifdef IXGBE_FCOE if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) && - (skb->protocol == htons(ETH_P_FCOE))) { + ((skb->protocol == htons(ETH_P_FCOE)) || + (skb->protocol == htons(ETH_P_FIP)))) { txq &= (adapter->ring_feature[RING_F_FCOE].indices - 1); txq += adapter->ring_feature[RING_F_FCOE].mask; return txq; @@ -5675,18 +5676,25 @@ static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb, tx_ring = adapter->tx_ring[skb->queue_mapping]; - if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) && - (skb->protocol == htons(ETH_P_FCOE))) { - tx_flags |= IXGBE_TX_FLAGS_FCOE; #ifdef IXGBE_FCOE + if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { #ifdef CONFIG_IXGBE_DCB - tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK - << IXGBE_TX_FLAGS_VLAN_SHIFT); - tx_flags |= ((adapter->fcoe.up << 13) - << IXGBE_TX_FLAGS_VLAN_SHIFT); -#endif + /* for FCoE with DCB, we force the priority to what + * was specified by the switch */ + if ((skb->protocol == htons(ETH_P_FCOE)) || + (skb->protocol == htons(ETH_P_FIP))) { + tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK + << IXGBE_TX_FLAGS_VLAN_SHIFT); + tx_flags |= ((adapter->fcoe.up << 13) + << IXGBE_TX_FLAGS_VLAN_SHIFT); + } #endif + /* flag for FCoE offloads */ + if (skb->protocol == htons(ETH_P_FCOE)) + tx_flags |= IXGBE_TX_FLAGS_FCOE; } +#endif + /* four things can cause us to need a context descriptor */ if (skb_is_gso(skb) || (skb->ip_summed == CHECKSUM_PARTIAL) ||