From: Amerigo Wang <amwang@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Matt Mackall <mpm@selenic.com>,
netdev@vger.kernel.org, bridge@lists.linux-foundation.org,
Andy Gospodarek <gospo@redhat.com>,
Neil Horman <nhorman@tuxdriver.com>,
Amerigo Wang <amwang@redhat.com>, Jeff Moyer <jmoyer@redhat.com>,
Stephen Hemminger <shemminger@linux-foundation.org>,
bonding-devel@lists.sourceforge.net,
Jay Vosburgh <fubar@us.ibm.com>,
David Miller <davem@davemloft.net>
Subject: [v2 Patch 3/3] bonding: make bonding support netpoll
Date: Mon, 5 Apr 2010 05:12:40 -0400 [thread overview]
Message-ID: <20100405091628.4890.30541.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20100405091605.4890.31181.sendpatchset@localhost.localdomain>
Based on Andy's work, but I modified a lot.
Similar to the patch for bridge, this patch does:
1) implement the 2 methods to support netpoll for bonding;
2) modify netpoll during forwarding packets via bonding;
3) disable netpoll support of bonding when a netpoll-unabled device
is added to bonding;
4) enable netpoll support when all underlying devices support netpoll.
Cc: Andy Gospodarek <gospo@redhat.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: WANG Cong <amwang@redhat.com>
---
Index: linux-2.6/drivers/net/bonding/bond_main.c
===================================================================
--- linux-2.6.orig/drivers/net/bonding/bond_main.c
+++ linux-2.6/drivers/net/bonding/bond_main.c
@@ -59,6 +59,7 @@
#include <linux/uaccess.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
+#include <linux/netpoll.h>
#include <linux/inetdevice.h>
#include <linux/igmp.h>
#include <linux/etherdevice.h>
@@ -430,7 +431,18 @@ int bond_dev_queue_xmit(struct bonding *
}
skb->priority = 1;
- dev_queue_xmit(skb);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ if (bond->dev->priv_flags & IFF_IN_NETPOLL) {
+ struct netpoll *np = bond->dev->npinfo->netpoll;
+ slave_dev->npinfo = bond->dev->npinfo;
+ np->real_dev = np->dev = skb->dev;
+ slave_dev->priv_flags |= IFF_IN_NETPOLL;
+ netpoll_send_skb(np, skb);
+ slave_dev->priv_flags &= ~IFF_IN_NETPOLL;
+ np->dev = bond->dev;
+ } else
+#endif
+ dev_queue_xmit(skb);
return 0;
}
@@ -1329,6 +1341,60 @@ static void bond_detach_slave(struct bon
bond->slave_cnt--;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static bool slaves_support_netpoll(struct net_device *bond_dev)
+{
+ struct bonding *bond = netdev_priv(bond_dev);
+ struct slave *slave;
+ int i = 0;
+ bool ret = true;
+
+ read_lock(&bond->lock);
+ bond_for_each_slave(bond, slave, i) {
+ if ((slave->dev->priv_flags & IFF_DISABLE_NETPOLL)
+ || !slave->dev->netdev_ops->ndo_poll_controller)
+ ret = false;
+ }
+ read_unlock(&bond->lock);
+ return i != 0 && ret;
+}
+
+static void bond_poll_controller(struct net_device *bond_dev)
+{
+ struct net_device *dev = bond_dev->npinfo->netpoll->real_dev;
+ if (dev != bond_dev)
+ netpoll_poll_dev(dev);
+}
+
+static void bond_netpoll_cleanup(struct net_device *bond_dev)
+{
+ struct bonding *bond = netdev_priv(bond_dev);
+ struct slave *slave;
+ const struct net_device_ops *ops;
+ int i;
+
+ read_lock(&bond->lock);
+ bond_dev->npinfo = NULL;
+ bond_for_each_slave(bond, slave, i) {
+ if (slave->dev) {
+ ops = slave->dev->netdev_ops;
+ if (ops->ndo_netpoll_cleanup)
+ ops->ndo_netpoll_cleanup(slave->dev);
+ else
+ slave->dev->npinfo = NULL;
+ }
+ }
+ read_unlock(&bond->lock);
+}
+
+#else
+
+static void bond_netpoll_cleanup(struct net_device *bond_dev)
+{
+}
+
+#endif
+
/*---------------------------------- IOCTL ----------------------------------*/
static int bond_sethwaddr(struct net_device *bond_dev,
@@ -1746,6 +1812,18 @@ int bond_enslave(struct net_device *bond
new_slave->state == BOND_STATE_ACTIVE ? "n active" : " backup",
new_slave->link != BOND_LINK_DOWN ? "n up" : " down");
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ if (slaves_support_netpoll(bond_dev)) {
+ bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL;
+ if (bond_dev->npinfo)
+ slave_dev->npinfo = bond_dev->npinfo;
+ } else if (!(bond_dev->priv_flags & IFF_DISABLE_NETPOLL)) {
+ bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
+ pr_info("New slave device %s does not support netpoll\n",
+ slave_dev->name);
+ pr_info("Disabling netpoll support for %s\n", bond_dev->name);
+ }
+#endif
/* enslave is successful */
return 0;
@@ -1929,6 +2007,15 @@ int bond_release(struct net_device *bond
netdev_set_master(slave_dev, NULL);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ if (slaves_support_netpoll(bond_dev))
+ bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL;
+ if (slave_dev->netdev_ops->ndo_netpoll_cleanup)
+ slave_dev->netdev_ops->ndo_netpoll_cleanup(slave_dev);
+ else
+ slave_dev->npinfo = NULL;
+#endif
+
/* close slave before restoring its mac address */
dev_close(slave_dev);
@@ -4448,6 +4535,10 @@ static const struct net_device_ops bond_
.ndo_vlan_rx_register = bond_vlan_rx_register,
.ndo_vlan_rx_add_vid = bond_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_netpoll_cleanup = bond_netpoll_cleanup,
+ .ndo_poll_controller = bond_poll_controller,
+#endif
};
static void bond_setup(struct net_device *bond_dev)
@@ -4533,6 +4624,8 @@ static void bond_uninit(struct net_devic
{
struct bonding *bond = netdev_priv(bond_dev);
+ bond_netpoll_cleanup(bond_dev);
+
/* Release the bonded slaves */
bond_release_all(bond_dev);
next prev parent reply other threads:[~2010-04-05 9:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-05 9:12 [v2 Patch 1/3] netpoll: add generic support for bridge and bonding devices Amerigo Wang
2010-04-05 9:12 ` [v2 Patch 2/3] bridge: make bridge support netpoll Amerigo Wang
2010-04-05 9:12 ` Amerigo Wang [this message]
2010-04-05 19:43 ` [v2 Patch 3/3] bonding: make bonding " Andy Gospodarek
2010-04-06 2:43 ` Cong Wang
2010-04-06 4:38 ` Cong Wang
2010-04-06 14:48 ` Andy Gospodarek
2010-04-07 2:32 ` Cong Wang
2010-04-07 4:02 ` Andy Gospodarek
2010-04-07 4:20 ` Cong Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100405091628.4890.30541.sendpatchset@localhost.localdomain \
--to=amwang@redhat.com \
--cc=bonding-devel@lists.sourceforge.net \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=fubar@us.ibm.com \
--cc=gospo@redhat.com \
--cc=jmoyer@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mpm@selenic.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@tuxdriver.com \
--cc=shemminger@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).