From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthias Kaehlcke Subject: Re: FEC driver: rcv is not +last Date: Fri, 9 Apr 2010 10:17:59 +0200 Message-ID: <20100409081759.GR29538@darwin> References: <20100408104033.GI3787@darwin> <4BBEBE57.8020800@canonical.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: netdev@vger.kernel.org, Sascha Hauer To: Bryan Wu Return-path: Received: from relay2-d.mail.gandi.net ([217.70.183.194]:40092 "EHLO relay2-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754050Ab0DIITl (ORCPT ); Fri, 9 Apr 2010 04:19:41 -0400 Content-Disposition: inline In-Reply-To: <4BBEBE57.8020800@canonical.com> Sender: netdev-owner@vger.kernel.org List-ID: Hi Bryan, El Fri, Apr 09, 2010 at 01:42:47PM +0800 Bryan Wu ha dit: > On 04/08/2010 06:40 PM, Matthias Kaehlcke wrote: > >hi, > > > >i have problems with the FEC on a i.MX25 3-Stack board. the kernel is > >v2.6.34-rc2 plus the following patch: > >http://patchwork.ozlabs.org/patch/41235/ > > > >the following traces are generated at boot time: > > > >FEC Ethernet Driver > >fec: PHY @ 0x1, ID 0x20005ce1 -- unknown PHY! > >... > please try this patch on your hardware, it introduced phylib > supporting in fec.c driver: > http://lists.infradead.org/pipermail/linux-arm-kernel/2010-March/012214.html sascha pointed me yesterday to your patch, i tried it with v2 (http://lkml.org/lkml/2010/3/31/130), but without success. our distributor informed us that the board they let us is a preliminary hardware version and that this is probably the cause of the problem :/ i hope i'll get soon my hands on an offical board release and can verify that the FEC just works ;) thanks for your help! -- Matthias Kaehlcke Embedded Linux Developer Barcelona If sharing a thing in no way diminishes it, it is not rightly owned if it is not shared .''`. using free software / Debian GNU/Linux | http://debian.org : :' : `. `'` gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-