From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Hemminger Subject: Re: net-next: 2.6.34-rc1 regression: panic when running diagnostic on interface with IPv6 Date: Fri, 9 Apr 2010 15:19:16 -0700 Message-ID: <20100409151916.633fc58c@nehalam> References: <20100405.161221.159637463.davem@davemloft.net> <20100405.165317.89399272.davem@davemloft.net> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: David Miller , netdev@vger.kernel.org To: emil.s.tantilov@intel.com Return-path: Received: from mail.vyatta.com ([76.74.103.46]:52400 "EHLO mail.vyatta.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752285Ab0DIWTT (ORCPT ); Fri, 9 Apr 2010 18:19:19 -0400 In-Reply-To: <20100405.165317.89399272.davem@davemloft.net> Sender: netdev-owner@vger.kernel.org List-ID: On Mon, 05 Apr 2010 16:53:17 -0700 (PDT) David Miller wrote: > From: "Tantilov, Emil S" > Date: Mon, 5 Apr 2010 17:50:38 -0600 > > > David Miller wrote: > >> From: "Tantilov, Emil S" > >> Date: Mon, 5 Apr 2010 17:03:56 -0600 > >> > >>> David Miller wrote: > >>>> From: "Tantilov, Emil S" > >>>> Date: Tue, 23 Mar 2010 12:28:08 -0600 > >>>> > >>>>> Bisecting points to this patch: > >>>>> http://git.kernel.org/?p=linux/kernel/git/davem/net-next-2.6.git;a=commitdiff;h=84e8b803f1e16f3a2b8b80f80a63fa2f2f8a9be6 > >>>>> > >>>>> And I confirmed that the issue goes away after reverting it. > >>>>> > >>>>> Steps to reproduce: > >>>>> 1. Load the driver and configure IPv6 address. > >>>>> 2. Run ethtool diag: > >>>>> ethtool -t eth0 > >>>>> > >>>>> 3. If this doesn't brake it try again, or just do ifdown/up. Other > >>>>> operations on the interface will eventually panic the system: > >>>> > >>>> Stephen please fix this, thanks. > >>> > >>> Just FYI - I still see this issue with latest pull from net-2.6. > >> > >> It's net-next-2.6 that introduced the problem and has the follow-on > >> fixes, not net-2.6 > > > > Same in net-next: Are you using the standard e1000e driver from net-next or some other Intel version. It works fine on my e1000e doing online or offline tests. # ethtool -i eth4 driver: e1000e version: 1.0.2-k2 firmware-version: 5.11-2 bus-info: 0000:03:00.0 Do you have any other suggestions (script or anything), that makes the problem happen.