netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com,
	Bruce Allan <bruce.w.allan@intel.com>,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next-2.6 PATCH 05/12] e1000e: cleanup multiple common exit points
Date: Mon, 10 May 2010 18:00:31 -0700	[thread overview]
Message-ID: <20100511010029.30827.82837.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100511005801.30827.50808.stgit@localhost.localdomain>

From: Bruce Allan <bruce.w.allan@intel.com>

...in e1000_update_nvm_checksum_ich8lan().

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---

 drivers/net/e1000e/ich8lan.c |   41 +++++++++++++++++------------------------
 1 files changed, 17 insertions(+), 24 deletions(-)

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index b8c4dce..448e123 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1938,18 +1938,14 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 		new_bank_offset = nvm->flash_bank_size;
 		old_bank_offset = 0;
 		ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
-		if (ret_val) {
-			nvm->ops.release(hw);
-			goto out;
-		}
+		if (ret_val)
+			goto release;
 	} else {
 		old_bank_offset = nvm->flash_bank_size;
 		new_bank_offset = 0;
 		ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
-		if (ret_val) {
-			nvm->ops.release(hw);
-			goto out;
-		}
+		if (ret_val)
+			goto release;
 	}
 
 	for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
@@ -2005,8 +2001,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	if (ret_val) {
 		/* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
 		e_dbg("Flash commit failed.\n");
-		nvm->ops.release(hw);
-		goto out;
+		goto release;
 	}
 
 	/*
@@ -2017,18 +2012,15 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	 */
 	act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
 	ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data);
-	if (ret_val) {
-		nvm->ops.release(hw);
-		goto out;
-	}
+	if (ret_val)
+		goto release;
+
 	data &= 0xBFFF;
 	ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
 						       act_offset * 2 + 1,
 						       (u8)(data >> 8));
-	if (ret_val) {
-		nvm->ops.release(hw);
-		goto out;
-	}
+	if (ret_val)
+		goto release;
 
 	/*
 	 * And invalidate the previously valid segment by setting
@@ -2038,10 +2030,8 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	 */
 	act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
 	ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
-	if (ret_val) {
-		nvm->ops.release(hw);
-		goto out;
-	}
+	if (ret_val)
+		goto release;
 
 	/* Great!  Everything worked, we can now clear the cached entries. */
 	for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
@@ -2049,14 +2039,17 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 		dev_spec->shadow_ram[i].value = 0xFFFF;
 	}
 
+release:
 	nvm->ops.release(hw);
 
 	/*
 	 * Reload the EEPROM, or else modifications will not appear
 	 * until after the next adapter reset.
 	 */
-	e1000e_reload_nvm(hw);
-	msleep(10);
+	if (!ret_val) {
+		e1000e_reload_nvm(hw);
+		msleep(10);
+	}
 
 out:
 	if (ret_val)


  parent reply	other threads:[~2010-05-11  1:00 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-11  0:59 [net-next-2.6 PATCH 01/12] e1000e: use static params to save stack space (part 2) Jeff Kirsher
2010-05-11  0:59 ` [net-next-2.6 PATCH 02/12] e1000e: bad state after running ethtool diagnostics with AMT enabled Jeff Kirsher
2010-05-13  6:31   ` David Miller
2010-05-11  0:59 ` [net-next-2.6 PATCH 03/12] e1000e: initialize manageability (IPMI) pass-through in 82574/82583 Jeff Kirsher
2010-05-13  6:31   ` David Miller
2010-05-11  1:00 ` [net-next-2.6 PATCH 04/12] e1000e: s/w initiated LSC MSI-X interrupts not generated; no transmit Jeff Kirsher
2010-05-13  6:32   ` David Miller
2010-05-11  1:00 ` Jeff Kirsher [this message]
2010-05-13  6:32   ` [net-next-2.6 PATCH 05/12] e1000e: cleanup multiple common exit points David Miller
2010-05-11  1:00 ` [net-next-2.6 PATCH 06/12] e1000e: Remove EN_MAC_ADDR_FILTER check from enable_mng_pass_thru check Jeff Kirsher
2010-05-13  6:32   ` David Miller
2010-05-11  1:01 ` [net-next-2.6 PATCH 07/12] e1000e: Cleanup e1000_sw_lcd_config_ich8lan() Jeff Kirsher
2010-05-13  6:32   ` David Miller
2010-05-11  1:01 ` [net-next-2.6 PATCH 08/12] e1000e: Incorrect function pointer set for force_speed_duplex on 82577 Jeff Kirsher
2010-05-13  6:32   ` David Miller
2010-05-11  1:01 ` [net-next-2.6 PATCH 09/12] e1000e: fix checks for manageability enabled and management pass-through Jeff Kirsher
2010-05-13  6:32   ` David Miller
2010-05-11  1:02 ` [net-next-2.6 PATCH 10/12] e1000e: move settting of flow control refresh timer to link setup code Jeff Kirsher
2010-05-13  6:32   ` David Miller
2010-05-11  1:02 ` [net-next-2.6 PATCH 11/12] e1000e: Fix/cleanup PHY reset code for ICHx/PCHx Jeff Kirsher
2010-05-13  6:32   ` David Miller
2010-05-11  1:02 ` [net-next-2.6 PATCH 12/12] e1000e: add PCI device id to enable support for 82567V-4 Jeff Kirsher
2010-05-13  6:32   ` David Miller
2010-05-13  6:31 ` [net-next-2.6 PATCH 01/12] e1000e: use static params to save stack space (part 2) David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100511010029.30827.82837.stgit@localhost.localdomain \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=bruce.w.allan@intel.com \
    --cc=davem@davemloft.net \
    --cc=gospo@redhat.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).