From: Jiri Pirko <jpirko@redhat.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, fubar@us.ibm.com,
bonding-devel@lists.sourceforge.net, monis@voltaire.com
Subject: [PATCH net-next-2.6] bonding: move slave MTU handling from sysfs V2
Date: Tue, 18 May 2010 17:42:40 +0200 [thread overview]
Message-ID: <20100518154016.GD2878@psychotron.lab.eng.brq.redhat.com> (raw)
V1->V2: corrected res/ret use
For some reason, MTU handling (storing, and restoring) is taking place in
bond_sysfs. The correct place for this code is in bond_enslave, bond_release.
So move it there.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
---
drivers/net/bonding/bond_main.c | 15 ++++++++++++++-
drivers/net/bonding/bond_sysfs.c | 22 ++--------------------
2 files changed, 16 insertions(+), 21 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 5e12462..2c3f9db 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1533,6 +1533,14 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
*/
new_slave->original_flags = slave_dev->flags;
+ /* Save slave's original mtu and then set it to match the bond */
+ new_slave->original_mtu = slave_dev->mtu;
+ res = dev_set_mtu(slave_dev, bond->dev->mtu);
+ if (res) {
+ pr_debug("Error %d calling dev_set_mtu\n", res);
+ goto err_free;
+ }
+
/*
* Save slave's original ("permanent") mac address for modes
* that need it, and for restoring it upon release, and then
@@ -1550,7 +1558,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
res = dev_set_mac_address(slave_dev, &addr);
if (res) {
pr_debug("Error %d calling set_mac_address\n", res);
- goto err_free;
+ goto err_restore_mtu;
}
}
@@ -1785,6 +1793,9 @@ err_restore_mac:
dev_set_mac_address(slave_dev, &addr);
}
+err_restore_mtu:
+ dev_set_mtu(slave_dev, new_slave->original_mtu);
+
err_free:
kfree(new_slave);
@@ -1969,6 +1980,8 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
dev_set_mac_address(slave_dev, &addr);
}
+ dev_set_mtu(slave_dev, slave->original_mtu);
+
slave_dev->priv_flags &= ~(IFF_MASTER_8023AD | IFF_MASTER_ALB |
IFF_SLAVE_INACTIVE | IFF_BONDING |
IFF_SLAVE_NEEDARP);
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 392e291..29a7a8a 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -220,7 +220,6 @@ static ssize_t bonding_store_slaves(struct device *d,
char command[IFNAMSIZ + 1] = { 0, };
char *ifname;
int i, res, ret = count;
- u32 original_mtu;
struct slave *slave;
struct net_device *dev = NULL;
struct bonding *bond = to_bond(d);
@@ -281,18 +280,7 @@ static ssize_t bonding_store_slaves(struct device *d,
memcpy(bond->dev->dev_addr, dev->dev_addr,
dev->addr_len);
- /* Set the slave's MTU to match the bond */
- original_mtu = dev->mtu;
- res = dev_set_mtu(dev, bond->dev->mtu);
- if (res) {
- ret = res;
- goto out;
- }
-
res = bond_enslave(bond->dev, dev);
- bond_for_each_slave(bond, slave, i)
- if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0)
- slave->original_mtu = original_mtu;
if (res)
ret = res;
@@ -301,23 +289,17 @@ static ssize_t bonding_store_slaves(struct device *d,
if (command[0] == '-') {
dev = NULL;
- original_mtu = 0;
bond_for_each_slave(bond, slave, i)
if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
dev = slave->dev;
- original_mtu = slave->original_mtu;
break;
}
if (dev) {
pr_info("%s: Removing slave %s\n",
bond->dev->name, dev->name);
- res = bond_release(bond->dev, dev);
- if (res) {
+ res = bond_release(bond->dev, dev);
+ if (res)
ret = res;
- goto out;
- }
- /* set the slave MTU to the default */
- dev_set_mtu(dev, original_mtu);
} else {
pr_err("unable to remove non-existent slave %s for bond %s.\n",
ifname, bond->dev->name);
--
1.6.6.1
next reply other threads:[~2010-05-18 15:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-18 15:42 Jiri Pirko [this message]
2010-05-20 0:07 ` [PATCH net-next-2.6] bonding: move slave MTU handling from sysfs V2 Jay Vosburgh
2010-05-20 5:34 ` Jiri Pirko
2010-05-20 18:21 ` Jay Vosburgh
2010-06-02 10:40 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100518154016.GD2878@psychotron.lab.eng.brq.redhat.com \
--to=jpirko@redhat.com \
--cc=bonding-devel@lists.sourceforge.net \
--cc=davem@davemloft.net \
--cc=fubar@us.ibm.com \
--cc=monis@voltaire.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).