From: Amerigo Wang <amwang@redhat.com>
To: netdev@vger.kernel.org
Cc: herbert.xu@redhat.com, nhorman@redhat.com, sgruszka@redhat.com,
Amerigo Wang <amwang@redhat.com>,
davem@davemloft.net
Subject: [Patch 2/2] mlx4: add dynamic LRO disable support
Date: Wed, 2 Jun 2010 23:39:09 -0400 [thread overview]
Message-ID: <20100603034312.5305.61000.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20100603034303.5305.55552.sendpatchset@localhost.localdomain>
This patch adds dynamic LRO diable support for mlx4 net driver.
It also fixes a bug of mlx4, which checks NETIF_F_LRO flag in rx
path without rtnl lock.
I don't have mlx4 card, so only did compiling test. Anyone who wants
to test this is more than welcome.
This is based on Neil's initial work too.
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Neil Horman <nhorman@redhat.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
diff --git a/drivers/net/mlx4/en_ethtool.c b/drivers/net/mlx4/en_ethtool.c
index d5afd03..46cd049 100644
--- a/drivers/net/mlx4/en_ethtool.c
+++ b/drivers/net/mlx4/en_ethtool.c
@@ -387,6 +387,39 @@ static void mlx4_en_get_ringparam(struct net_device *dev,
param->tx_pending = mdev->profile.prof[priv->port].tx_ring_size;
}
+static int mlx4_ethtool_op_set_flags(struct net_device *dev, u32 data)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct mlx4_en_dev *mdev = priv->mdev;
+ int rc = 0;
+ int changed = 0;
+ static int old_num_lro;
+
+ if (data & ETH_FLAG_LRO) {
+ if (!(dev->features & NETIF_F_LRO)) {
+ dev->features |= NETIF_F_LRO;
+ changed = 1;
+ mdev->profile.num_lro = old_num_lro;
+ }
+ } else if (dev->features & NETIF_F_LRO) {
+ dev->features &= ~NETIF_F_LRO;
+ changed = 1;
+ old_num_lro = mdev->profile.num_lro;
+ mdev->profile.num_lro = 0;
+ }
+
+ if (changed && netif_running(dev)) {
+ mutex_lock(&mdev->state_lock);
+ mlx4_en_stop_port(dev);
+ rc = mlx4_en_start_port(dev);
+ if (rc)
+ en_err(priv, "Failed to restart port\n");
+ mutex_unlock(&mdev->state_lock);
+ }
+
+ return rc;
+}
+
const struct ethtool_ops mlx4_en_ethtool_ops = {
.get_drvinfo = mlx4_en_get_drvinfo,
.get_settings = mlx4_en_get_settings,
@@ -415,7 +448,7 @@ const struct ethtool_ops mlx4_en_ethtool_ops = {
.get_ringparam = mlx4_en_get_ringparam,
.set_ringparam = mlx4_en_set_ringparam,
.get_flags = ethtool_op_get_flags,
- .set_flags = ethtool_op_set_flags,
+ .set_flags = mlx4_ethtool_op_set_flags,
};
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 8e2fcb7..10f50ef 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -609,7 +609,7 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud
* - without IP options
* - not an IP fragment */
if (mlx4_en_can_lro(cqe->status) &&
- dev->features & NETIF_F_LRO) {
+ priv->mdev->profile.num_lro) {
nr = mlx4_en_complete_rx_desc(
priv, rx_desc,
next prev parent reply other threads:[~2010-06-03 3:39 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-03 3:38 [Patch 1/2] s2io: add dynamic LRO disable support Amerigo Wang
2010-06-03 3:39 ` Amerigo Wang [this message]
2010-06-03 12:37 ` [Patch 2/2] mlx4: " Ben Hutchings
2010-06-04 1:56 ` Cong Wang
2010-06-04 14:25 ` Ben Hutchings
2010-06-07 8:51 ` Cong Wang
2010-06-07 11:00 ` Stanislaw Gruszka
2010-06-07 13:15 ` Cong Wang
2010-06-09 9:23 ` Cong Wang
2010-06-09 10:49 ` Stanislaw Gruszka
2010-06-15 8:53 ` Cong Wang
2010-06-15 9:39 ` Stanislaw Gruszka
2010-06-17 10:54 ` Cong Wang
2010-06-17 12:03 ` Stanislaw Gruszka
2010-06-18 3:10 ` Cong Wang
2010-06-03 13:38 ` [Patch 1/2] s2io: " Michal Schmidt
2010-06-05 8:53 ` Ramkrishna Vepa
2010-06-07 9:01 ` Cong Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100603034312.5305.61000.sendpatchset@localhost.localdomain \
--to=amwang@redhat.com \
--cc=davem@davemloft.net \
--cc=herbert.xu@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sgruszka@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).