From: Amerigo Wang <amwang@redhat.com>
To: netdev@vger.kernel.org
Cc: nhorman@redhat.com, sgruszka@redhat.com, herbert.xu@redhat.com,
Amerigo Wang <amwang@redhat.com>,
bhutchings@solarflare.com, Ramkrishna.Vepa@exar.com,
davem@davemloft.net
Subject: [v2 Patch 2/2] mlx4: add dynamic LRO disable support
Date: Wed, 9 Jun 2010 06:05:34 -0400 [thread overview]
Message-ID: <20100609100938.6573.73536.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20100609100928.6573.14199.sendpatchset@localhost.localdomain>
This patch adds dynamic LRO diable support for mlx4 net driver.
It also fixes a bug of mlx4, which checks NETIF_F_LRO flag in rx
path without rtnl lock.
I don't have mlx4 card, so only did compiling test. Anyone who wants
to test this is more than welcome.
This is based on Neil's initial work too.
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Neil Horman <nhorman@redhat.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
---
diff --git a/drivers/net/mlx4/en_ethtool.c b/drivers/net/mlx4/en_ethtool.c
index d5afd03..2c77805 100644
--- a/drivers/net/mlx4/en_ethtool.c
+++ b/drivers/net/mlx4/en_ethtool.c
@@ -387,6 +387,37 @@ static void mlx4_en_get_ringparam(struct net_device *dev,
param->tx_pending = mdev->profile.prof[priv->port].tx_ring_size;
}
+static int mlx4_ethtool_op_set_flags(struct net_device *dev, u32 data)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct mlx4_en_dev *mdev = priv->mdev;
+ int rc = 0;
+ int changed = 0;
+
+ if (data & ETH_FLAG_LRO) {
+ if (!(dev->features & NETIF_F_LRO)) {
+ dev->features |= NETIF_F_LRO;
+ changed = 1;
+ mdev->profile.num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS);
+ }
+ } else if (dev->features & NETIF_F_LRO) {
+ dev->features &= ~NETIF_F_LRO;
+ changed = 1;
+ mdev->profile.num_lro = 0;
+ }
+
+ if (changed && netif_running(dev)) {
+ mutex_lock(&mdev->state_lock);
+ mlx4_en_stop_port(dev);
+ rc = mlx4_en_start_port(dev);
+ if (rc)
+ en_err(priv, "Failed to restart port\n");
+ mutex_unlock(&mdev->state_lock);
+ }
+
+ return rc;
+}
+
const struct ethtool_ops mlx4_en_ethtool_ops = {
.get_drvinfo = mlx4_en_get_drvinfo,
.get_settings = mlx4_en_get_settings,
@@ -415,7 +446,7 @@ const struct ethtool_ops mlx4_en_ethtool_ops = {
.get_ringparam = mlx4_en_get_ringparam,
.set_ringparam = mlx4_en_set_ringparam,
.get_flags = ethtool_op_get_flags,
- .set_flags = ethtool_op_set_flags,
+ .set_flags = mlx4_ethtool_op_set_flags,
};
diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c
index cbabf14..4ef42e2 100644
--- a/drivers/net/mlx4/en_main.c
+++ b/drivers/net/mlx4/en_main.c
@@ -70,8 +70,9 @@ MLX4_EN_PARM_INT(rss_xor, 0, "Use XOR hash function for RSS");
MLX4_EN_PARM_INT(rss_mask, 0xf, "RSS hash type bitmask");
/* Number of LRO sessions per Rx ring (rounded up to a power of two) */
-MLX4_EN_PARM_INT(num_lro, MLX4_EN_MAX_LRO_DESCRIPTORS,
- "Number of LRO sessions per ring or disabled (0)");
+unsigned int num_lro = MLX4_EN_MAX_LRO_DESCRIPTORS;
+module_param(num_lro , uint, 0444);
+MODULE_PARM_DESC(num_lro, "Number of LRO sessions per ring or disabled (0)");
/* Priority pausing */
MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index b55e46c..bbac975 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -568,4 +568,6 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset);
* Globals
*/
extern const struct ethtool_ops mlx4_en_ethtool_ops;
+
+extern unsigned int num_lro;
#endif
next prev parent reply other threads:[~2010-06-09 10:05 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-09 10:05 [v2 Patch 1/2] s2io: add dynamic LRO disable support Amerigo Wang
2010-06-09 10:05 ` Amerigo Wang [this message]
2010-06-09 11:05 ` [v2 Patch 2/2] mlx4: " Stanislaw Gruszka
2010-06-15 8:35 ` Cong Wang
2010-06-15 10:14 ` Stanislaw Gruszka
2010-06-17 10:48 ` Cong Wang
2010-06-09 14:00 ` [v2 Patch 1/2] s2io: " Ben Hutchings
2010-06-09 18:52 ` Ramkrishna Vepa
2010-06-15 8:26 ` Cong Wang
2010-06-15 16:07 ` Ramkrishna Vepa
2010-06-15 17:21 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100609100938.6573.73536.sendpatchset@localhost.localdomain \
--to=amwang@redhat.com \
--cc=Ramkrishna.Vepa@exar.com \
--cc=bhutchings@solarflare.com \
--cc=davem@davemloft.net \
--cc=herbert.xu@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sgruszka@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).