netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Hemminger <shemminger@vyatta.com>
To: Mike McCormack <mikem@ring3k.org>
Cc: netdev@vger.kernel.org
Subject: Re: [PATCH] sky2: Fix most checkpatch errors
Date: Mon, 26 Jul 2010 08:46:33 -0700	[thread overview]
Message-ID: <20100726084633.36fe26d4@nehalam> (raw)
In-Reply-To: <4C4D8D67.7080008@ring3k.org>

On Mon, 26 Jul 2010 22:28:07 +0900
Mike McCormack <mikem@ring3k.org> wrote:

> Tidy up whitespace and formatting to reduce from
>  38 errors to 4 and 20 fewer warnings.
> 
> Signed-off-by: Mike McCormack <mikem@ring3k.org>

Please don't bother fixing the stupid checkpatch whitespace noise.
Any patch that just substitutes space for tab (or vice versa) with
no human visible impact is just stupid.

But there are some useful tidbits in there.

--- a/drivers/net/sky2.c	2010-07-26 08:40:37.554612692 -0700
+++ b/drivers/net/sky2.c	2010-07-26 08:44:18.683011839 -0700
@@ -79,7 +79,7 @@
 
 #define SKY2_EEPROM_MAGIC	0x9955aabb
 
-#define RING_NEXT(x,s)	(((x)+1) & ((s)-1))
+#define RING_NEXT(x, s)	(((x)+1) & ((s)-1))
 
 static const u32 default_msg =
     NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
@@ -172,7 +172,7 @@ static int gm_phy_write(struct sky2_hw *
 		udelay(10);
 	}
 
-	dev_warn(&hw->pdev->dev,"%s: phy write timeout\n", hw->dev[port]->name);
+	dev_warn(&hw->pdev->dev, "%s: phy write timeout\n", hw->dev[port]->name);
 	return -ETIMEDOUT;
 
 io_error:
@@ -1067,7 +1067,7 @@ static inline struct sky2_rx_le *sky2_ne
 	return le;
 }
 
-static unsigned sky2_get_rx_threshold(struct sky2_port* sky2)
+static unsigned sky2_get_rx_threshold(struct sky2_port *sky2)
 {
 	unsigned size;
 
@@ -1078,7 +1078,7 @@ static unsigned sky2_get_rx_threshold(st
 	return (size - 8) / sizeof(u32);
 }
 
-static unsigned sky2_get_rx_data_size(struct sky2_port* sky2)
+static unsigned sky2_get_rx_data_size(struct sky2_port *sky2)
 {
 	struct rx_ring_info *re;
 	unsigned size;
@@ -3014,7 +3014,7 @@ static int __devinit sky2_init(struct sk
 	hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
 	hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
 
-	switch(hw->chip_id) {
+	switch (hw->chip_id) {
 	case CHIP_ID_YUKON_XL:
 		hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY;
 		if (hw->chip_rev < CHIP_REV_YU_XL_A2)
@@ -3685,7 +3685,7 @@ static int sky2_set_mac_address(struct n
 	return 0;
 }
 
-static void inline sky2_add_filter(u8 filter[8], const u8 *addr)
+static inline void sky2_add_filter(u8 filter[8], const u8 *addr)
 {
 	u32 bit;
 
@@ -3911,7 +3911,7 @@ static int sky2_set_coalesce(struct net_
 		return -EINVAL;
 	if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
 		return -EINVAL;
-	if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
+	if (ecmd->rx_max_coalesced_frames_irq > RX_MAX_PENDING)
 		return -EINVAL;
 
 	if (ecmd->tx_coalesce_usecs == 0)
@@ -4372,7 +4372,7 @@ static int sky2_debug_show(struct seq_fi
 			seq_printf(seq, "%u:", idx);
 		sop = 0;
 
-		switch(le->opcode & ~HW_OWNER) {
+		switch (le->opcode & ~HW_OWNER) {
 		case OP_ADDR64:
 			seq_printf(seq, " %#x:", a);
 			break;
@@ -4441,7 +4441,7 @@ static int sky2_device_event(struct noti
 	if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug)
 		return NOTIFY_DONE;
 
-	switch(event) {
+	switch (event) {
 	case NETDEV_CHANGENAME:
 		if (sky2->debugfs) {
 			sky2->debugfs = debugfs_rename(sky2_debug, sky2->debugfs,
@@ -4636,7 +4636,7 @@ static int __devinit sky2_test_msi(struc
 	struct pci_dev *pdev = hw->pdev;
 	int err;
 
-	init_waitqueue_head (&hw->msi_wait);
+	init_waitqueue_head(&hw->msi_wait);
 
 	sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
 

      reply	other threads:[~2010-07-26 15:46 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-26 13:28 [PATCH] sky2: Fix most checkpatch errors Mike McCormack
2010-07-26 15:46 ` Stephen Hemminger [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100726084633.36fe26d4@nehalam \
    --to=shemminger@vyatta.com \
    --cc=mikem@ring3k.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).