From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com, bphilips@novell.com,
Bruce Allan <bruce.w.allan@intel.com>,
stable@kernel.org, Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-2.6 PATCH 2/2] e1000e: don't check for alternate MAC addr on parts that don't support it
Date: Thu, 19 Aug 2010 15:44:11 -0700 [thread overview]
Message-ID: <20100819224410.10079.31067.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100819224307.10079.89643.stgit@localhost.localdomain>
From: Bruce Allan <bruce.w.allan@intel.com>
The alternate MAC address feature is only supported by 80003ES2LAN and
82571 LOMs as well as a couple 82571 mezzanine cards. Checking for an
alternate MAC address on other parts can fail leading to the driver not
able to load. This patch limits the check for an alternate MAC address
to be done only for parts that support the feature.
This issue has been around since support for the feature was introduced
to the e1000e driver in 2.6.34.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Reported-by: Fabio Varesano <fax8@users.sourceforge.net>
Cc: stable@kernel.org
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/e1000e/82571.c | 30 +++++++++++++++++-------------
drivers/net/e1000e/defines.h | 4 ++++
drivers/net/e1000e/lib.c | 10 ++++++++++
3 files changed, 31 insertions(+), 13 deletions(-)
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index f844e6c..d3d4a57 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -936,12 +936,14 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
ew32(IMC, 0xffffffff);
icr = er32(ICR);
- /* Install any alternate MAC address into RAR0 */
- ret_val = e1000_check_alt_mac_addr_generic(hw);
- if (ret_val)
- return ret_val;
+ if (hw->mac.type == e1000_82571) {
+ /* Install any alternate MAC address into RAR0 */
+ ret_val = e1000_check_alt_mac_addr_generic(hw);
+ if (ret_val)
+ return ret_val;
- e1000e_set_laa_state_82571(hw, true);
+ e1000e_set_laa_state_82571(hw, true);
+ }
/* Reinitialize the 82571 serdes link state machine */
if (hw->phy.media_type == e1000_media_type_internal_serdes)
@@ -1618,14 +1620,16 @@ static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw)
{
s32 ret_val = 0;
- /*
- * If there's an alternate MAC address place it in RAR0
- * so that it will override the Si installed default perm
- * address.
- */
- ret_val = e1000_check_alt_mac_addr_generic(hw);
- if (ret_val)
- goto out;
+ if (hw->mac.type == e1000_82571) {
+ /*
+ * If there's an alternate MAC address place it in RAR0
+ * so that it will override the Si installed default perm
+ * address.
+ */
+ ret_val = e1000_check_alt_mac_addr_generic(hw);
+ if (ret_val)
+ goto out;
+ }
ret_val = e1000_read_mac_addr_generic(hw);
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 307a72f..93b3bed 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -621,6 +621,7 @@
#define E1000_FLASH_UPDATES 2000
/* NVM Word Offsets */
+#define NVM_COMPAT 0x0003
#define NVM_ID_LED_SETTINGS 0x0004
#define NVM_INIT_CONTROL2_REG 0x000F
#define NVM_INIT_CONTROL3_PORT_B 0x0014
@@ -643,6 +644,9 @@
/* Mask bits for fields in Word 0x1a of the NVM */
#define NVM_WORD1A_ASPM_MASK 0x000C
+/* Mask bits for fields in Word 0x03 of the EEPROM */
+#define NVM_COMPAT_LOM 0x0800
+
/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
#define NVM_SUM 0xBABA
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index df4a279..0fd4eb5 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -183,6 +183,16 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
u16 offset, nvm_alt_mac_addr_offset, nvm_data;
u8 alt_mac_addr[ETH_ALEN];
+ ret_val = e1000_read_nvm(hw, NVM_COMPAT, 1, &nvm_data);
+ if (ret_val)
+ goto out;
+
+ /* Check for LOM (vs. NIC) or one of two valid mezzanine cards */
+ if (!((nvm_data & NVM_COMPAT_LOM) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_DUAL) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)))
+ goto out;
+
ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
&nvm_alt_mac_addr_offset);
if (ret_val) {
next prev parent reply other threads:[~2010-08-19 22:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-19 22:43 [net-2.6 PATCH 1/2] e1000e: disable ASPM L1 on 82573 Jeff Kirsher
2010-08-19 22:44 ` Jeff Kirsher [this message]
2010-08-19 22:49 ` [net-2.6 PATCH 2/2] e1000e: don't check for alternate MAC addr on parts that don't support it David Miller
2010-08-19 22:48 ` [net-2.6 PATCH 1/2] e1000e: disable ASPM L1 on 82573 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100819224410.10079.31067.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=bphilips@novell.com \
--cc=bruce.w.allan@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=stable@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).