From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com, bphilips@novell.com,
Alexander Duyck <alexander.h.duyck@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next-2.6 PATCH 08/20] ixgbe: pull ring configuration into it's own function
Date: Thu, 19 Aug 2010 16:36:05 -0700 [thread overview]
Message-ID: <20100819233602.10335.80879.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100819233052.10335.13176.stgit@localhost.localdomain>
From: Alexander Duyck <alexander.h.duyck@intel.com>
These changes add ixgbe_configure_rx_ring which is used to setup the base
function pointers for the ring.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_main.c | 33 ++++++++++++++++++++-------------
1 files changed, 20 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index f5d8902..ddabe14 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2655,6 +2655,23 @@ static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, int index)
IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl);
}
+static void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *ring)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u64 rdba = ring->dma;
+ u16 reg_idx = ring->reg_idx;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RDBAL(reg_idx), (rdba & DMA_BIT_MASK(32)));
+ IXGBE_WRITE_REG(hw, IXGBE_RDBAH(reg_idx), (rdba >> 32));
+ IXGBE_WRITE_REG(hw, IXGBE_RDLEN(reg_idx),
+ ring->count * sizeof(union ixgbe_adv_rx_desc));
+ IXGBE_WRITE_REG(hw, IXGBE_RDH(reg_idx), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_RDT(reg_idx), 0);
+ ring->head = IXGBE_RDH(reg_idx);
+ ring->tail = IXGBE_RDT(reg_idx);
+}
+
/**
* ixgbe_configure_rx - Configure 8259x Receive Unit after Reset
* @adapter: board private structure
@@ -2663,13 +2680,12 @@ static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, int index)
**/
static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
{
- u64 rdba;
struct ixgbe_hw *hw = &adapter->hw;
struct ixgbe_ring *rx_ring;
struct net_device *netdev = adapter->netdev;
int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
- int i, j;
- u32 rdlen, rxctrl;
+ int i;
+ u32 rxctrl;
u32 fctrl, hlreg0;
u32 rdrxctl;
int rx_buf_len;
@@ -2718,7 +2734,6 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
#endif
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
- rdlen = adapter->rx_ring[0]->count * sizeof(union ixgbe_adv_rx_desc);
/* disable receives while setting up the descriptors */
rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
@@ -2729,15 +2744,6 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
*/
for (i = 0; i < adapter->num_rx_queues; i++) {
rx_ring = adapter->rx_ring[i];
- rdba = rx_ring->dma;
- j = rx_ring->reg_idx;
- IXGBE_WRITE_REG(hw, IXGBE_RDBAL(j), (rdba & DMA_BIT_MASK(32)));
- IXGBE_WRITE_REG(hw, IXGBE_RDBAH(j), (rdba >> 32));
- IXGBE_WRITE_REG(hw, IXGBE_RDLEN(j), rdlen);
- IXGBE_WRITE_REG(hw, IXGBE_RDH(j), 0);
- IXGBE_WRITE_REG(hw, IXGBE_RDT(j), 0);
- rx_ring->head = IXGBE_RDH(j);
- rx_ring->tail = IXGBE_RDT(j);
rx_ring->rx_buf_len = rx_buf_len;
if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)
@@ -2758,6 +2764,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
}
#endif /* IXGBE_FCOE */
+ ixgbe_configure_rx_ring(adapter, rx_ring);
ixgbe_configure_srrctl(adapter, rx_ring);
}
next prev parent reply other threads:[~2010-08-19 23:36 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-19 23:33 [net-next-2.6 PATCH 01/20] ixgbe: cleanup ixgbe_get_drvinfo to be extra careful with buffer boundaries Jeff Kirsher
2010-08-19 23:33 ` [net-next-2.6 PATCH 02/20] ixgbe: remove redundant DMA alignment code Jeff Kirsher
2010-08-19 23:45 ` David Miller
2010-08-19 23:34 ` [net-next-2.6 PATCH 03/20] ixgbe: move setting of GSO size for 82598 into ixgbe_configure_dcb Jeff Kirsher
2010-08-19 23:46 ` David Miller
2010-08-19 23:34 ` [net-next-2.6 PATCH 04/20] ixgbe: combine two modifications of TXDCTL into one Jeff Kirsher
2010-08-19 23:46 ` David Miller
2010-08-19 23:34 ` [net-next-2.6 PATCH 05/20] ixgbe: move configuration of the MTQC register into it's own function Jeff Kirsher
2010-08-19 23:46 ` David Miller
2010-08-19 23:35 ` [net-next-2.6 PATCH 06/20] ixgbe: move Tx ring configuration into a separate function Jeff Kirsher
2010-08-19 23:46 ` David Miller
2010-08-19 23:35 ` [net-next-2.6 PATCH 07/20] ixgbe: consolidate all setting of MRQC into one function Jeff Kirsher
2010-08-19 23:46 ` David Miller
2010-08-19 23:36 ` Jeff Kirsher [this message]
2010-08-19 23:46 ` [net-next-2.6 PATCH 08/20] ixgbe: pull ring configuration into it's own function David Miller
2010-08-19 23:36 ` [net-next-2.6 PATCH 09/20] ixgbe: pull PSRTYPE configuration into a separate function Jeff Kirsher
2010-08-19 23:46 ` David Miller
2010-08-19 23:36 ` [net-next-2.6 PATCH 10/20] ixgbe: combine accesses to FCTRL register into ixgbe_set_rx_mode Jeff Kirsher
2010-08-19 23:46 ` David Miller
2010-08-19 23:37 ` [net-next-2.6 PATCH 11/20] ixgbe: bump PS header size to 512 bytes Jeff Kirsher
2010-08-19 23:46 ` David Miller
2010-08-19 23:37 ` [net-next-2.6 PATCH 12/20] ixgbe: remove redundant configuration of vmolr, rename generic variable Jeff Kirsher
2010-08-19 23:46 ` David Miller
2010-08-19 23:38 ` [net-next-2.6 PATCH 13/20] ixgbe: Move max frame size and Rx buffer length configuration into a function Jeff Kirsher
2010-08-19 23:46 ` David Miller
2010-08-19 23:38 ` [net-next-2.6 PATCH 14/20] ixgbe: move all Rx DMA control register writes to one central location Jeff Kirsher
2010-08-19 23:47 ` David Miller
2010-08-19 23:38 ` [net-next-2.6 PATCH 15/20] ixgbe: Move virtualization config into a separate function Jeff Kirsher
2010-08-19 23:47 ` David Miller
2010-08-19 23:39 ` [net-next-2.6 PATCH 16/20] ixgbe: move all GPIE register config into a single function Jeff Kirsher
2010-08-19 23:47 ` David Miller
2010-08-19 23:39 ` [net-next-2.6 PATCH 17/20] ixgbe: pull all Tx init into ixgbe_configure_tx Jeff Kirsher
2010-08-19 23:47 ` David Miller
2010-08-19 23:40 ` [net-next-2.6 PATCH 18/20] ixgbe: combine Rx into into ixgbe_configure_rx Jeff Kirsher
2010-08-19 23:47 ` David Miller
2010-08-19 23:40 ` [net-next-2.6 PATCH 19/20] ixgbe: update all DESC_ADV macros to accept a ring pointer Jeff Kirsher
2010-08-19 23:47 ` David Miller
2010-08-19 23:40 ` [net-next-2.6 PATCH 20/20] ixgbe: rewrite ethtool test to use standard config functions Jeff Kirsher
2010-08-19 23:47 ` David Miller
2010-08-19 23:45 ` [net-next-2.6 PATCH 01/20] ixgbe: cleanup ixgbe_get_drvinfo to be extra careful with buffer boundaries David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100819233602.10335.80879.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=alexander.h.duyck@intel.com \
--cc=bphilips@novell.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).