[PATCH 0/2] phylib: Cleanup marvell.c and add 88E1149R support.

[PATCH 0/2] phylib: Cleanup marvell.c and add 88E1149R support.

[David Daney]

This is the second iteration of this patch.  I have split out the
device tree support from the first version to a different patch set.
The 88E1149R support is useful 'stand alone', so if it is acceptable,
it can be merged first.

The first patch is a small cleanup suggested by Cyril Chemparathy, the
second one adds basic 88E1149R support.

David Daney (2):
  phylib: Use common page register definition for Marvell PHYs.
  phylib: Add support for Marvell 88E1149R devices.

 drivers/net/phy/marvell.c   |   67 ++++++++++++++++++++++++++++++++++--------
 include/linux/marvell_phy.h |    1 +
 2 files changed, 55 insertions(+), 13 deletions(-)

Cc: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
Cc: Arnaud Patard <arnaud.patard-dQbF7i+pzddAfugRpC6u6w@public.gmane.org>
Cc: Benjamin Herrenschmidt <benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
Cc: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
-- 
1.7.2.3

[PATCH 1/2] phylib: Use common page register definition for Marvell PHYs.

[David Daney]

The definition of the Marvell PHY page register is not specific to
88E1121, so rename the macro to MII_MARVELL_PHY_PAGE, and use it
throughout.

Suggested-by: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
Signed-off-by: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
Cc: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
Cc: Arnaud Patard <arnaud.patard-dQbF7i+pzddAfugRpC6u6w@public.gmane.org>
Cc: Benjamin Herrenschmidt <benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
---
 drivers/net/phy/marvell.c |   27 ++++++++++++++-------------
 1 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index f0bd1a1..3600b8b 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -35,6 +35,8 @@
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
+#define MII_MARVELL_PHY_PAGE		22
+
 #define MII_M1011_IEVENT		0x13
 #define MII_M1011_IEVENT_CLEAR		0x0000
 
@@ -80,7 +82,6 @@
 #define MII_88E1121_PHY_LED_CTRL	16
 #define MII_88E1121_PHY_LED_PAGE	3
 #define MII_88E1121_PHY_LED_DEF		0x0030
-#define MII_88E1121_PHY_PAGE		22
 
 #define MII_M1011_PHY_STATUS		0x11
 #define MII_M1011_PHY_STATUS_1000	0x8000
@@ -190,9 +191,9 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 {
 	int err, oldpage, mscr;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE,
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
 			MII_88E1121_PHY_MSCR_PAGE);
 	if (err < 0)
 		return err;
@@ -218,7 +219,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 			return err;
 	}
 
-	phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 
 	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 	if (err < 0)
@@ -229,11 +230,11 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
 	phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
-	phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 
 	err = genphy_config_aneg(phydev);
 
@@ -244,9 +245,9 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
 {
 	int err, oldpage, mscr;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE,
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
 			MII_88E1121_PHY_MSCR_PAGE);
 	if (err < 0)
 		return err;
@@ -258,7 +259,7 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 	if (err < 0)
 		return err;
 
@@ -398,7 +399,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
 	int err;
 
 	/* Change address */
-	err = phy_write(phydev, 0x16, 0x0002);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
 	if (err < 0)
 		return err;
 
@@ -408,7 +409,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
 		return err;
 
 	/* Change address */
-	err = phy_write(phydev, 0x16, 0x0003);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003);
 	if (err < 0)
 		return err;
 
@@ -421,7 +422,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
 		return err;
 
 	/* Reset address */
-	err = phy_write(phydev, 0x16, 0x0);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
 	if (err < 0)
 		return err;
 
-- 
1.7.2.3

[PATCH 2/2] phylib: Add support for Marvell 88E1149R devices.

[David Daney]

The 88E1149R is 10/100/1000 quad-gigabit Ethernet PHY.  The
.config_aneg function can be shared with 88E1118, but it needs its own
.config_init.

Signed-off-by: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
Cc: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
Cc: Arnaud Patard <arnaud.patard-dQbF7i+pzddAfugRpC6u6w@public.gmane.org>
Cc: Benjamin Herrenschmidt <benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
Cc: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/net/phy/marvell.c   |   40 ++++++++++++++++++++++++++++++++++++++++
 include/linux/marvell_phy.h |    1 +
 2 files changed, 41 insertions(+), 0 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 3600b8b..def19d7 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -433,6 +433,32 @@ static int m88e1118_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int m88e1149_config_init(struct phy_device *phydev)
+{
+	int err;
+
+	/* Change address */
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
+	if (err < 0)
+		return err;
+
+	/* Enable 1000 Mbit */
+	err = phy_write(phydev, 0x15, 0x1048);
+	if (err < 0)
+		return err;
+
+	/* Reset address */
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
 static int m88e1145_config_init(struct phy_device *phydev)
 {
 	int err;
@@ -686,6 +712,19 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
+		.phy_id = MARVELL_PHY_ID_88E1149R,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
+		.name = "Marvell 88E1149R",
+		.features = PHY_GBIT_FEATURES,
+		.flags = PHY_HAS_INTERRUPT,
+		.config_init = &m88e1149_config_init,
+		.config_aneg = &m88e1118_config_aneg,
+		.read_status = &genphy_read_status,
+		.ack_interrupt = &marvell_ack_interrupt,
+		.config_intr = &marvell_config_intr,
+		.driver = { .owner = THIS_MODULE },
+	},
+	{
 		.phy_id = MARVELL_PHY_ID_88E1240,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1240",
@@ -736,6 +775,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = {
 	{ 0x01410e10, 0xfffffff0 },
 	{ 0x01410cb0, 0xfffffff0 },
 	{ 0x01410cd0, 0xfffffff0 },
+	{ 0x01410e50, 0xfffffff0 },
 	{ 0x01410e30, 0xfffffff0 },
 	{ 0x01410e90, 0xfffffff0 },
 	{ }
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index 1ff81b5..dd3c34e 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -11,6 +11,7 @@
 #define MARVELL_PHY_ID_88E1118		0x01410e10
 #define MARVELL_PHY_ID_88E1121R		0x01410cb0
 #define MARVELL_PHY_ID_88E1145		0x01410cd0
+#define MARVELL_PHY_ID_88E1149R		0x01410e50
 #define MARVELL_PHY_ID_88E1240		0x01410e30
 #define MARVELL_PHY_ID_88E1318S		0x01410e90
 
-- 
1.7.2.3

Re: [PATCH 0/2] phylib: Cleanup marvell.c and add 88E1149R support.

[David Miller]

From: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
Date: Fri, 19 Nov 2010 13:58:51 -0800

> This is the second iteration of this patch.  I have split out the
> device tree support from the first version to a different patch set.
> The 88E1149R support is useful 'stand alone', so if it is acceptable,
> it can be merged first.
> 
> The first patch is a small cleanup suggested by Cyril Chemparathy, the
> second one adds basic 88E1149R support.

All applied to net-2.6, thanks.