From: Dan Carpenter <error27@gmail.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: netdev@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: [patch -next] stmmac: unwind properly in stmmac_dvr_probe()
Date: Tue, 21 Dec 2010 10:34:56 +0300 [thread overview]
Message-ID: <20101221073456.GG1936@bicker> (raw)
The original code had a several problems:
*) It had potential null dereferences of "priv" and "res".
*) It released the memory region before it was aquired.
*) It didn't free "ndev" after it was allocated.
*) It didn't call unregister_netdev() after calling stmmac_probe().
Signed-off-by: Dan Carpenter <error27@gmail.com>
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 20f803d..34a0af3 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -1647,10 +1647,8 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
pr_info("STMMAC driver:\n\tplatform registration... ");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENODEV;
- goto out;
- }
+ if (!res)
+ return -ENODEV;
pr_info("\tdone!\n");
if (!request_mem_region(res->start, resource_size(res),
@@ -1658,22 +1656,21 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
pr_err("%s: ERROR: memory allocation failed"
"cannot get the I/O addr 0x%x\n",
__func__, (unsigned int)res->start);
- ret = -EBUSY;
- goto out;
+ return -EBUSY;
}
addr = ioremap(res->start, resource_size(res));
if (!addr) {
pr_err("%s: ERROR: memory mapping failed\n", __func__);
ret = -ENOMEM;
- goto out;
+ goto out_release_region;
}
ndev = alloc_etherdev(sizeof(struct stmmac_priv));
if (!ndev) {
pr_err("%s: ERROR: allocating the device\n", __func__);
ret = -ENOMEM;
- goto out;
+ goto out_unmap;
}
SET_NETDEV_DEV(ndev, &pdev->dev);
@@ -1683,8 +1680,8 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
if (ndev->irq == -ENXIO) {
pr_err("%s: ERROR: MAC IRQ configuration "
"information not found\n", __func__);
- ret = -ENODEV;
- goto out;
+ ret = -ENXIO;
+ goto out_free_ndev;
}
priv = netdev_priv(ndev);
@@ -1711,18 +1708,18 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
if (priv->plat->init) {
ret = priv->plat->init(pdev);
if (unlikely(ret))
- goto out;
+ goto out_free_ndev;
}
/* MAC HW revice detection */
ret = stmmac_mac_device_setup(ndev);
if (ret < 0)
- goto out;
+ goto out_plat_exit;
/* Network Device Registration */
ret = stmmac_probe(ndev);
if (ret < 0)
- goto out;
+ goto out_plat_exit;
/* associate a PHY - it is provided by another platform bus */
if (!driver_for_each_device
@@ -1730,7 +1727,7 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
stmmac_associate_phy)) {
pr_err("No PHY device is associated with this MAC!\n");
ret = -ENODEV;
- goto out;
+ goto out_unregister;
}
pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
@@ -1741,19 +1738,22 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
pr_debug("\tMDIO bus (id: %d)...", priv->plat->bus_id);
ret = stmmac_mdio_register(ndev);
if (ret < 0)
- goto out;
+ goto out_unregister;
pr_debug("registered!\n");
+ return 0;
-out:
- if (ret < 0) {
- if (priv->plat->exit)
- priv->plat->exit(pdev);
-
- platform_set_drvdata(pdev, NULL);
- release_mem_region(res->start, resource_size(res));
- if (addr != NULL)
- iounmap(addr);
- }
+out_unregister:
+ unregister_netdev(ndev);
+out_plat_exit:
+ if (priv->plat->exit)
+ priv->plat->exit(pdev);
+out_free_ndev:
+ free_netdev(ndev);
+ platform_set_drvdata(pdev, NULL);
+out_unmap:
+ iounmap(addr);
+out_release_region:
+ release_mem_region(res->start, resource_size(res));
return ret;
}
next reply other threads:[~2010-12-21 7:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-21 7:34 Dan Carpenter [this message]
2010-12-21 18:53 ` [patch -next] stmmac: unwind properly in stmmac_dvr_probe() David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101221073456.GG1936@bicker \
--to=error27@gmail.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).