From: Francois Romieu <romieu@fr.zoreil.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, Hayes Wang <hayeswang@realtek.com>,
Ben Hutchings <benh@debian.org>
Subject: [net-next-2.6 #2 06/08] r8169: magic.
Date: Tue, 4 Jan 2011 02:08:21 +0100 [thread overview]
Message-ID: <20110104010821.GG5957@electric-eye.fr.zoreil.com> (raw)
Adapted from version 8.019.00 of Realtek's r8168 driver.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hayes <hayeswang@realtek.com>
---
drivers/net/r8169.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 93 insertions(+), 0 deletions(-)
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 0ec47f4..a73dd28 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -278,6 +278,18 @@ enum rtl8168_8101_registers {
};
enum rtl8168_registers {
+ ERIDR = 0x70,
+ ERIAR = 0x74,
+#define ERIAR_FLAG 0x80000000
+#define ERIAR_WRITE_CMD 0x80000000
+#define ERIAR_READ_CMD 0x00000000
+#define ERIAR_ADDR_BYTE_ALIGN 4
+#define ERIAR_EXGMAC 0
+#define ERIAR_MSIX 1
+#define ERIAR_ASF 2
+#define ERIAR_TYPE_SHIFT 16
+#define ERIAR_BYTEEN 0x0f
+#define ERIAR_BYTEEN_SHIFT 12
EPHY_RXER_NUM = 0x7c,
OCPDR = 0xb0, /* OCP GPHY access */
#define OCPDR_WRITE_CMD 0x80000000
@@ -572,6 +584,81 @@ static int rtl8169_poll(struct napi_struct *napi, int budget);
static const unsigned int rtl8169_rx_config =
(RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
+static u32 ocp_read(struct rtl8169_private *tp, u8 mask, u16 reg)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ int i;
+
+ RTL_W32(OCPAR, ((u32)mask & 0x0f) << 12 | (reg & 0x0fff));
+ for (i = 0; i < 20; i++) {
+ udelay(100);
+ if (RTL_R32(OCPAR) & OCPAR_FLAG)
+ break;
+ }
+ return RTL_R32(OCPDR);
+}
+
+static void ocp_write(struct rtl8169_private *tp, u8 mask, u16 reg, u32 data)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ int i;
+
+ RTL_W32(OCPDR, data);
+ RTL_W32(OCPAR, OCPAR_FLAG | ((u32)mask & 0x0f) << 12 | (reg & 0x0fff));
+ for (i = 0; i < 20; i++) {
+ udelay(100);
+ if ((RTL_R32(OCPAR) & OCPAR_FLAG) == 0)
+ break;
+ }
+}
+
+static void rtl8168_oob_notify(void __iomem *ioaddr, u8 cmd)
+{
+ int i;
+
+ RTL_W8(ERIDR, cmd);
+ RTL_W32(ERIAR, 0x800010e8);
+ msleep(2);
+ for (i = 0; i < 5; i++) {
+ udelay(100);
+ if (!(RTL_R32(ERIDR) & ERIAR_FLAG))
+ break;
+ }
+
+ ocp_write(ioaddr, 0x1, 0x30, 0x00000001);
+}
+
+#define OOB_CMD_RESET 0x00
+#define OOB_CMD_DRIVER_START 0x05
+#define OOB_CMD_DRIVER_STOP 0x06
+
+static void rtl8168_driver_start(struct rtl8169_private *tp)
+{
+ int i;
+
+ rtl8168_oob_notify(tp, OOB_CMD_DRIVER_START);
+
+ for (i = 0; i < 10; i++) {
+ msleep(10);
+ if (ocp_read(tp, 0x0f, 0x0010) & 0x00000800)
+ break;
+ }
+}
+
+static void rtl8168_driver_stop(struct rtl8169_private *tp)
+{
+ int i;
+
+ rtl8168_oob_notify(tp, OOB_CMD_DRIVER_STOP);
+
+ for (i = 0; i < 10; i++) {
+ msleep(10);
+ if ((ocp_read(tp, 0x0f, 0x0010) & 0x00000800) == 0)
+ break;
+ }
+}
+
+
static void r8169_mdio_write(void __iomem *ioaddr, int reg_addr, int value)
{
int i;
@@ -2913,6 +3000,9 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
dev->base_addr, dev->dev_addr,
(u32)(RTL_R32(TxConfig) & 0x9cf0f8ff), dev->irq);
+ if (tp->mac_version == RTL_GIGA_MAC_VER_27)
+ rtl8168_driver_start(tp);
+
rtl8169_init_phy(dev, tp);
/*
@@ -2948,6 +3038,9 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
+ if (tp->mac_version == RTL_GIGA_MAC_VER_27)
+ rtl8168_driver_stop(tp);
+
cancel_delayed_work_sync(&tp->task);
unregister_netdev(dev);
--
1.7.3.4
reply other threads:[~2011-01-04 1:08 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110104010821.GG5957@electric-eye.fr.zoreil.com \
--to=romieu@fr.zoreil.com \
--cc=benh@debian.org \
--cc=davem@davemloft.net \
--cc=hayeswang@realtek.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox