Re: [Bugme-new] [Bug 25062] New: Bonding packet deduplication doesn't work properly anymore

Re: [Bugme-new] [Bug 25062] New: Bonding packet deduplication doesn't work properly anymore

[Andrew Morton]

(switched to email.  Please respond via emailed reply-to-all, not via the
bugzilla web interface).

On Fri, 17 Dec 2010 11:45:18 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:

> https://bugzilla.kernel.org/show_bug.cgi?id=25062
> 
>            Summary: Bonding packet deduplication doesn't work properly
>                     anymore
>            Product: Networking
>            Version: 2.5
>     Kernel Version: > 2.6.33
>           Platform: All
>         OS/Version: Linux
>               Tree: Mainline
>             Status: NEW
>           Severity: high
>           Priority: P1
>          Component: Other
>         AssignedTo: acme@ghostprotocols.net
>         ReportedBy: kevin.lapagna@bigtag.ch
>         Regression: No
> 
> 
> Here's the setup:
> 
> switch: ordinary cisco switch
> eth0: NIC with kernel module tg3
> eth1: NIC with kernel module e1000e
> bond0: bond with slaves eth0,eth1 in mode 1 (or 5)
> bond0.100: vlan device created with vconfig
> bridge100: bridge created with brctl
> tap1: tap device created with tunctl
> vguest: qemu-kvm vguest whit emulated e1000 NIC
> 
> 
> |________________|-- eth0 \                                               |________________|
> | switch |          -- bond0 -- bond0.100 -- bridge100 -- tap1 -- | vguest |
> |________|-- eth1 /                                               |________|
> 
> When the vguest emits an ethernet broadcast (DHCP-request), it's forwarded all
> the way up to the switch, through eth0. The switch forwards the broadcast -
> also to eth1. The packet travels then all the way back to bridge100. So the
> last status known for bridge100, regarding the mac address of the vgeust is,
> that it is behind bond0.110 (instead of tap1). If a DHCP-server responds to the
> request, the packet travels to bridge100, which has now a faulty
> MAC-address-table and the packet will be rejected and never reaches tap1 and
> therefor not the vguest.
> 
> I witnessed this wrong behavior in kernel 2.6.37-rc5 (debian package), 2.6.36.2
> and 2.6.35.9 (self compiled -  vanilla). The setup has worked with kernels <=
> 2.6.33.7. I've never tried 2.6.34.
> 
> I assume the setup above is a common way for the separation of virtual guests
> on a network level. So this could become a major issue for a lot of people when
> upgrading their kernels.
> 

Re: [Bugme-new] [Bug 25062] New: Bonding packet deduplication doesn't work properly anymore

[Jay Vosburgh]

Andrew Morton <akpm@linux-foundation.org> wrote:

>On Fri, 17 Dec 2010 11:45:18 GMT
>bugzilla-daemon@bugzilla.kernel.org wrote:
>
>> https://bugzilla.kernel.org/show_bug.cgi?id=25062
>> 
>>            Summary: Bonding packet deduplication doesn't work properly
>>                     anymore
>>            Product: Networking
>>            Version: 2.5
>>     Kernel Version: > 2.6.33
>>           Platform: All
>>         OS/Version: Linux
>>               Tree: Mainline
>>             Status: NEW
>>           Severity: high
>>           Priority: P1
>>          Component: Other
>>         AssignedTo: acme@ghostprotocols.net
>>         ReportedBy: kevin.lapagna@bigtag.ch
>>         Regression: No
>> 
>> 
>> Here's the setup:
>> 
>> switch: ordinary cisco switch
>> eth0: NIC with kernel module tg3
>> eth1: NIC with kernel module e1000e
>> bond0: bond with slaves eth0,eth1 in mode 1 (or 5)
>> bond0.100: vlan device created with vconfig
>> bridge100: bridge created with brctl
>> tap1: tap device created with tunctl
>> vguest: qemu-kvm vguest whit emulated e1000 NIC
>> 
>> 
>> |________________|-- eth0 \                                               |________________|
>> | switch |          -- bond0 -- bond0.100 -- bridge100 -- tap1 -- | vguest |
>> |________|-- eth1 /                                               |________|
>> 
>> When the vguest emits an ethernet broadcast (DHCP-request), it's forwarded all
>> the way up to the switch, through eth0. The switch forwards the broadcast -
>> also to eth1. The packet travels then all the way back to bridge100. So the
>> last status known for bridge100, regarding the mac address of the vgeust is,
>> that it is behind bond0.110 (instead of tap1). If a DHCP-server responds to the
>> request, the packet travels to bridge100, which has now a faulty
>> MAC-address-table and the packet will be rejected and never reaches tap1 and
>> therefor not the vguest.
>> 
>> I witnessed this wrong behavior in kernel 2.6.37-rc5 (debian package), 2.6.36.2
>> and 2.6.35.9 (self compiled -  vanilla). The setup has worked with kernels <=
>> 2.6.33.7. I've never tried 2.6.34.
>> 
>> I assume the setup above is a common way for the separation of virtual guests
>> on a network level. So this could become a major issue for a lot of people when
>> upgrading their kernels.

	Just a note that I have reproduced what I believe is the same
problem (I didn't use tap, and assigned an IP to the bridge).  I used
arping to generate ethernet broadcasts.  I see the problem on 2.6.36.2,
but not on today's net-next-2.6.

	I'll see if I can dig up the root cause tomorrow.

	-J

---
	-Jay Vosburgh, IBM Linux Technology Center, fubar@us.ibm.com