From: Vasanthy Kolluri <vkolluri@cisco.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [net-next-2.6 PATCH 1/3] enic: Bug fix: Reset driver count of registered unicast addresses to zero during device reset
Date: Thu, 17 Feb 2011 10:53:12 -0800 [thread overview]
Message-ID: <20110217185311.2476.27883.stgit@savbu-pc100.cisco.com> (raw)
In-Reply-To: <20110217185245.2476.60944.stgit@savbu-pc100.cisco.com>
From: Vasanthy Kolluri <vkolluri@cisco.com>
During a device reset, clear the counter for the no. of unicast addresses registered.
Also, rename the routines that update unicast and multicast address lists.
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Danny Guo <dannguo@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
---
drivers/net/enic/enic.h | 2 +-
drivers/net/enic/enic_main.c | 13 +++++++------
2 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index 57fcaee..5f4eb45 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -32,7 +32,7 @@
#define DRV_NAME "enic"
#define DRV_DESCRIPTION "Cisco VIC Ethernet NIC Driver"
-#define DRV_VERSION "2.1.1.6"
+#define DRV_VERSION "2.1.1.7"
#define DRV_COPYRIGHT "Copyright 2008-2011 Cisco Systems, Inc"
#define ENIC_BARS_MAX 6
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 0c24370..a625a0e 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -874,9 +874,10 @@ static struct net_device_stats *enic_get_stats(struct net_device *netdev)
return net_stats;
}
-static void enic_reset_multicast_list(struct enic *enic)
+static void enic_reset_addr_lists(struct enic *enic)
{
enic->mc_count = 0;
+ enic->uc_count = 0;
enic->flags = 0;
}
@@ -941,7 +942,7 @@ static int enic_set_mac_address(struct net_device *netdev, void *p)
return enic_dev_add_station_addr(enic);
}
-static void enic_add_multicast_addr_list(struct enic *enic)
+static void enic_update_multicast_addr_list(struct enic *enic)
{
struct net_device *netdev = enic->netdev;
struct netdev_hw_addr *ha;
@@ -996,7 +997,7 @@ static void enic_add_multicast_addr_list(struct enic *enic)
enic->mc_count = mc_count;
}
-static void enic_add_unicast_addr_list(struct enic *enic)
+static void enic_update_unicast_addr_list(struct enic *enic)
{
struct net_device *netdev = enic->netdev;
struct netdev_hw_addr *ha;
@@ -1073,9 +1074,9 @@ static void enic_set_rx_mode(struct net_device *netdev)
}
if (!promisc) {
- enic_add_unicast_addr_list(enic);
+ enic_update_unicast_addr_list(enic);
if (!allmulti)
- enic_add_multicast_addr_list(enic);
+ enic_update_multicast_addr_list(enic);
}
}
@@ -2067,7 +2068,7 @@ static void enic_reset(struct work_struct *work)
enic_dev_hang_notify(enic);
enic_stop(enic->netdev);
enic_dev_hang_reset(enic);
- enic_reset_multicast_list(enic);
+ enic_reset_addr_lists(enic);
enic_init_vnic_resources(enic);
enic_set_rss_nic_cfg(enic);
enic_dev_set_ig_vlan_rewrite_mode(enic);
next prev parent reply other threads:[~2011-02-17 18:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-17 18:53 [net-next-2.6 PATCH 0/3] enic: updates to version 2.1.1.9 Vasanthy Kolluri
2011-02-17 18:53 ` Vasanthy Kolluri [this message]
2011-02-17 22:14 ` [net-next-2.6 PATCH 1/3] enic: Bug fix: Reset driver count of registered unicast addresses to zero during device reset David Miller
2011-02-17 18:53 ` [net-next-2.6 PATCH 2/3] enic: Clean up: Remove a not needed #ifdef Vasanthy Kolluri
2011-02-17 22:14 ` David Miller
2011-02-17 18:53 ` [net-next-2.6 PATCH 3/3] enic: Always use single transmit and single receive hardware queues per device Vasanthy Kolluri
2011-02-17 22:12 ` David Miller
2011-02-17 22:45 ` Vasanthy Kolluri (vkolluri)
2011-02-17 22:48 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110217185311.2476.27883.stgit@savbu-pc100.cisco.com \
--to=vkolluri@cisco.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).