From mboxrd@z Thu Jan  1 00:00:00 1970
From: David Miller <davem@davemloft.net>
Subject: Re: [PATCHv2 2/2] DM9000B: Fix PHY power for network down/up
Date: Wed, 23 Feb 2011 14:30:13 -0800 (PST)
Message-ID: <20110223.143013.246523171.davem@davemloft.net>
References: <4D62D323.7010403@henry.nestler.mail.gmail.com>
	<20110222.102410.260079835.davem@davemloft.net>
	<4D642AC6.6050101@henry.nestler.mail.gmail.com>
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Cc: netdev@vger.kernel.org, akpm@linux-foundation.org,
	linux-arm-kernel@lists.infradead.org
To: henry.nestler@gmail.com
Return-path: <netdev-owner@vger.kernel.org>
Received: from 74-93-104-97-Washington.hfc.comcastbusiness.net ([74.93.104.97]:59248
	"EHLO sunset.davemloft.net" rhost-flags-OK-OK-OK-OK)
	by vger.kernel.org with ESMTP id S932682Ab1BWW3h (ORCPT
	<rfc822;netdev@vger.kernel.org>); Wed, 23 Feb 2011 17:29:37 -0500
In-Reply-To: <4D642AC6.6050101@henry.nestler.mail.gmail.com>
Sender: netdev-owner@vger.kernel.org
List-ID: <netdev.vger.kernel.org>

From: Henry Nestler <henry.nestler@gmail.com>
Date: Tue, 22 Feb 2011 22:29:42 +0100

> DM9000 revision B needs 1 ms delay after PHY power-on.
> PHY must be powered on by writing 0 into register DM9000_GPR before
> all other settings will change (see Davicom spec and example code).
> 
> Remember, that register DM9000_GPR was not changed by reset sequence.
> 
> Without this fix the FIFO is out of sync and sends wrong data after
> sequence of "ifconfig ethX down ; ifconfig ethX up".

I've applied both of your patches, thanks.