netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Duyck <alexander.h.duyck@intel.com>
To: davem@davemloft.net, jeffrey.t.kirsher@intel.com,
	bhutchings@solarflare.com
Cc: netdev@vger.kernel.org
Subject: [net-next-2.6 PATCH 07/10] [RFC] ixgbe: add basic support for settting and getting nfc controls
Date: Fri, 25 Feb 2011 15:33:15 -0800	[thread overview]
Message-ID: <20110225233315.7920.99717.stgit@gitlad.jf.intel.com> (raw)
In-Reply-To: <20110225232357.7920.58559.stgit@gitlad.jf.intel.com>

This change adds basic suppport for the obtaining of RSS ring counts and
setting of RSS hash options.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---

 drivers/net/ixgbe/ixgbe_ethtool.c |   60 +++++++++++++++++++++++++++++++++++++
 1 files changed, 60 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 1b40c02..6c17e45 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -2299,6 +2299,65 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data)
 	return 0;
 }
 
+static int ixgbe_get_rss_hash_opts(struct ixgbe_adapter *adapter,
+				   struct ethtool_rxnfc *cmd)
+{
+	cmd->data = 0;
+
+	/* if RSS is disabled then report no hashing */
+	if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
+		return 0;
+
+	/* Report default options for RSS on ixgbe */
+	switch (cmd->flow_type) {
+	case TCP_V4_FLOW:
+		cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+	case UDP_V4_FLOW:
+	case SCTP_V4_FLOW:
+	case AH_ESP_V4_FLOW:
+	case AH_V4_FLOW:
+	case ESP_V4_FLOW:
+	case IPV4_FLOW:
+		cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+		break;
+	case TCP_V6_FLOW:
+		cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+	case UDP_V6_FLOW:
+	case SCTP_V6_FLOW:
+	case AH_ESP_V6_FLOW:
+	case AH_V6_FLOW:
+	case ESP_V6_FLOW:
+	case IPV6_FLOW:
+		cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
+			   void *rule_locs)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	int ret = -EOPNOTSUPP;
+
+	switch (cmd->cmd) {
+	case ETHTOOL_GRXFH:
+		ret = ixgbe_get_rss_hash_opts(adapter, cmd);
+		break;
+	case ETHTOOL_GRXRINGS:
+		cmd->data = adapter->num_rx_queues;
+		ret = 0;
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
 static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.get_settings           = ixgbe_get_settings,
 	.set_settings           = ixgbe_set_settings,
@@ -2334,6 +2393,7 @@ static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.set_coalesce           = ixgbe_set_coalesce,
 	.get_flags              = ethtool_op_get_flags,
 	.set_flags              = ixgbe_set_flags,
+	.get_rxnfc		= ixgbe_get_rxnfc,
 };
 
 void ixgbe_set_ethtool_ops(struct net_device *netdev)


  parent reply	other threads:[~2011-02-25 23:33 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-25 23:32 [net-next-2.6 PATCH 00/10] Workarounds and fixes for ntuple filters Alexander Duyck
2011-02-25 23:32 ` [net-next-2.6 PATCH 01/10] ethtool: prevent null pointer dereference with NTUPLE set but no set_rx_ntuple Alexander Duyck
2011-02-26  0:21   ` Ben Hutchings
2011-02-26  0:40     ` Alexander Duyck
2011-02-27  0:07       ` David Miller
2011-02-27  2:16         ` Alexander Duyck
2011-02-25 23:32 ` [net-next-2.6 PATCH 02/10] ethtool: add ntuple flow specifier to network flow classifier Alexander Duyck
2011-02-26  1:00   ` Ben Hutchings
2011-02-26  5:30     ` Alexander Duyck
2011-03-02 18:50       ` Ben Hutchings
2011-03-02 19:11         ` Dimitrios Michailidis
2011-03-02 19:27           ` Ben Hutchings
2011-03-02 20:03             ` Dimitrios Michailidis
2011-03-04 19:30               ` Alexander Duyck
2011-03-04 21:00         ` Alexander Duyck
2011-02-27  0:05   ` David Miller
2011-02-25 23:32 ` [net-next-2.6 PATCH 03/10] [RFC] ixgbe: remove ntuple filtering Alexander Duyck
2011-02-25 23:33 ` [net-next-2.6 PATCH 04/10] [RFC] ethtool: remove support for ETHTOOL_GRXNTUPLE Alexander Duyck
2011-02-25 23:33 ` [net-next-2.6 PATCH 05/10] [RFC] ixgbe: add support for different Rx packet buffer sizes Alexander Duyck
2011-02-25 23:33 ` [net-next-2.6 PATCH 06/10] [RFC] ixgbe: update perfect filter framework to support retaining filters Alexander Duyck
2011-02-25 23:33 ` Alexander Duyck [this message]
2011-02-25 23:33 ` [net-next-2.6 PATCH 08/10] [RFC] ixgbe: add support for displaying ntuple filters via the nfc interface Alexander Duyck
2011-02-25 23:33 ` [net-next-2.6 PATCH 09/10] [RFC] ixgbe: add support for nfc addition and removal of filters Alexander Duyck
2011-02-25 23:33 ` [net-next-2.6 PATCH 10/10] [RFC] ixgbe: Add support for using the same fields as ntuple in nfc Alexander Duyck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110225233315.7920.99717.stgit@gitlad.jf.intel.com \
    --to=alexander.h.duyck@intel.com \
    --cc=bhutchings@solarflare.com \
    --cc=davem@davemloft.net \
    --cc=jeffrey.t.kirsher@intel.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).