* [PATCH net-next-2.6 2/7] be2net: Checksum field valid only for TCP/UDP
@ 2011-03-07 13:08 Padmanabh Ratnakar
2011-03-11 0:05 ` Ram Pai
0 siblings, 1 reply; 3+ messages in thread
From: Padmanabh Ratnakar @ 2011-03-07 13:08 UTC (permalink / raw)
To: netdev, davem; +Cc: Padmanabh Ratnakar, Sathya Perla, Subramanian Seetharaman
L4 checksum field is valid only for TCP/UDP packets in Lancer
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
---
drivers/net/benet/be_main.c | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index bf34434..ac7ae21 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -865,14 +865,17 @@ static void be_rx_stats_update(struct be_rx_obj *rxo,
static inline bool csum_passed(struct be_eth_rx_compl *rxcp)
{
- u8 l4_cksm, ipv6, ipcksm;
+ u8 l4_cksm, ipv6, ipcksm, tcpf, udpf;
l4_cksm = AMAP_GET_BITS(struct amap_eth_rx_compl, l4_cksm, rxcp);
ipcksm = AMAP_GET_BITS(struct amap_eth_rx_compl, ipcksm, rxcp);
ipv6 = AMAP_GET_BITS(struct amap_eth_rx_compl, ip_version, rxcp);
+ tcpf = AMAP_GET_BITS(struct amap_eth_rx_compl, tcpf, rxcp);
+ udpf = AMAP_GET_BITS(struct amap_eth_rx_compl, udpf, rxcp);
- /* Ignore ipcksm for ipv6 pkts */
- return l4_cksm && (ipcksm || ipv6);
+ /* L4 checksum is not reliable for non TCP/UDP packets.
+ * Also ignore ipcksm for ipv6 pkts */
+ return (tcpf || udpf) && l4_cksm && (ipcksm || ipv6);
}
static struct be_rx_page_info *
--
1.6.0.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH net-next-2.6 2/7] be2net: Checksum field valid only for TCP/UDP
2011-03-07 13:08 [PATCH net-next-2.6 2/7] be2net: Checksum field valid only for TCP/UDP Padmanabh Ratnakar
@ 2011-03-11 0:05 ` Ram Pai
2011-03-11 10:04 ` Padmanabh.Ratnakar
0 siblings, 1 reply; 3+ messages in thread
From: Ram Pai @ 2011-03-11 0:05 UTC (permalink / raw)
To: Padmanabh Ratnakar; +Cc: netdev, davem, Sathya Perla, Subramanian Seetharaman
On Mon, Mar 07, 2011 at 06:38:16PM +0530, Padmanabh Ratnakar wrote:
> L4 checksum field is valid only for TCP/UDP packets in Lancer
>
> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
> Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
> ---
> drivers/net/benet/be_main.c | 9 ++++++---
> 1 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
> index bf34434..ac7ae21 100644
> --- a/drivers/net/benet/be_main.c
> +++ b/drivers/net/benet/be_main.c
> @@ -865,14 +865,17 @@ static void be_rx_stats_update(struct be_rx_obj *rxo,
>
> static inline bool csum_passed(struct be_eth_rx_compl *rxcp)
> {
> - u8 l4_cksm, ipv6, ipcksm;
> + u8 l4_cksm, ipv6, ipcksm, tcpf, udpf;
>
> l4_cksm = AMAP_GET_BITS(struct amap_eth_rx_compl, l4_cksm, rxcp);
> ipcksm = AMAP_GET_BITS(struct amap_eth_rx_compl, ipcksm, rxcp);
> ipv6 = AMAP_GET_BITS(struct amap_eth_rx_compl, ip_version, rxcp);
> + tcpf = AMAP_GET_BITS(struct amap_eth_rx_compl, tcpf, rxcp);
> + udpf = AMAP_GET_BITS(struct amap_eth_rx_compl, udpf, rxcp);
>
> - /* Ignore ipcksm for ipv6 pkts */
> - return l4_cksm && (ipcksm || ipv6);
> + /* L4 checksum is not reliable for non TCP/UDP packets.
> + * Also ignore ipcksm for ipv6 pkts */
> + return (tcpf || udpf) && l4_cksm && (ipcksm || ipv6);
Is it invalid for non-Lancer too ? if not, then should'nt the
above condition be applied only for lancer?
RP
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [PATCH net-next-2.6 2/7] be2net: Checksum field valid only for TCP/UDP
2011-03-11 0:05 ` Ram Pai
@ 2011-03-11 10:04 ` Padmanabh.Ratnakar
0 siblings, 0 replies; 3+ messages in thread
From: Padmanabh.Ratnakar @ 2011-03-11 10:04 UTC (permalink / raw)
To: linuxram; +Cc: netdev, davem, Sathya.Perla, subbu.seetharaman
On Mon, Mar 07, 2011 at 06:38:16PM +0530, Padmanabh Ratnakar wrote:
> L4 checksum field is valid only for TCP/UDP packets in Lancer
>
> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
> Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
> ---
> drivers/net/benet/be_main.c | 9 ++++++---
> 1 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
> index bf34434..ac7ae21 100644
> --- a/drivers/net/benet/be_main.c
> +++ b/drivers/net/benet/be_main.c
> @@ -865,14 +865,17 @@ static void be_rx_stats_update(struct be_rx_obj *rxo,
>
> static inline bool csum_passed(struct be_eth_rx_compl *rxcp)
> {
> - u8 l4_cksm, ipv6, ipcksm;
> + u8 l4_cksm, ipv6, ipcksm, tcpf, udpf;
>
> l4_cksm = AMAP_GET_BITS(struct amap_eth_rx_compl, l4_cksm, rxcp);
> ipcksm = AMAP_GET_BITS(struct amap_eth_rx_compl, ipcksm, rxcp);
> ipv6 = AMAP_GET_BITS(struct amap_eth_rx_compl, ip_version, rxcp);
> + tcpf = AMAP_GET_BITS(struct amap_eth_rx_compl, tcpf, rxcp);
> + udpf = AMAP_GET_BITS(struct amap_eth_rx_compl, udpf, rxcp);
>
> - /* Ignore ipcksm for ipv6 pkts */
> - return l4_cksm && (ipcksm || ipv6);
> + /* L4 checksum is not reliable for non TCP/UDP packets.
> + * Also ignore ipcksm for ipv6 pkts */
> + return (tcpf || udpf) && l4_cksm && (ipcksm || ipv6);
> Is it invalid for non-Lancer too ? if not, then should'nt the
> above condition be applied only for lancer?
> RP
There is no need to apply this condition only for Lancer. This check works for BE too.
In BE, for non-tcp/udp packets l4_csum is always 0.
Thanks,
Padmanabh
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-03-11 10:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-03-07 13:08 [PATCH net-next-2.6 2/7] be2net: Checksum field valid only for TCP/UDP Padmanabh Ratnakar
2011-03-11 0:05 ` Ram Pai
2011-03-11 10:04 ` Padmanabh.Ratnakar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).