From: Anton Blanchard <anton@samba.org>
To: leitao@linux.vnet.ibm.com
Cc: netdev@vger.kernel.org, michael@ellerman.id.au
Subject: [PATCH 4/14] ehea: Remove num_tx_qps module option
Date: Tue, 5 Apr 2011 21:32:38 +1000 [thread overview]
Message-ID: <20110405213238.711c9b80@kryten> (raw)
In-Reply-To: <20110405212825.6eb85677@kryten>
The num_tx_qps module option allows a user to configure a different
number of tx and rx queues. Now the networking stack is multiqueue
aware it makes little sense just to enable the tx queues and not the
rx queues so remove the option.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
Index: linux-2.6/drivers/net/ehea/ehea.h
===================================================================
--- linux-2.6.orig/drivers/net/ehea/ehea.h 2011-04-05 20:35:41.000000000 +1000
+++ linux-2.6/drivers/net/ehea/ehea.h 2011-04-05 20:36:04.160683726 +1000
@@ -58,7 +58,6 @@
#define EHEA_MIN_ENTRIES_QP 127
#define EHEA_SMALL_QUEUES
-#define EHEA_NUM_TX_QP 1
#define EHEA_LRO_MAX_AGGR 64
#ifdef EHEA_SMALL_QUEUES
@@ -460,8 +459,6 @@ struct ehea_port {
char int_aff_name[EHEA_IRQ_NAME_SIZE];
int allmulti; /* Indicates IFF_ALLMULTI state */
int promisc; /* Indicates IFF_PROMISC state */
- int num_tx_qps;
- int num_add_tx_qps;
int num_mcs;
int resets;
unsigned long flags;
Index: linux-2.6/drivers/net/ehea/ehea_main.c
===================================================================
--- linux-2.6.orig/drivers/net/ehea/ehea_main.c 2011-04-05 20:35:41.013326677 +1000
+++ linux-2.6/drivers/net/ehea/ehea_main.c 2011-04-05 20:36:22.128632142 +1000
@@ -63,7 +63,6 @@ static int sq_entries = EHEA_DEF_ENTRIES
static int use_mcs = 1;
static int use_lro;
static int lro_max_aggr = EHEA_LRO_MAX_AGGR;
-static int num_tx_qps = EHEA_NUM_TX_QP;
static int prop_carrier_state;
module_param(msg_level, int, 0);
@@ -75,9 +74,7 @@ module_param(prop_carrier_state, int, 0)
module_param(use_mcs, int, 0);
module_param(use_lro, int, 0);
module_param(lro_max_aggr, int, 0);
-module_param(num_tx_qps, int, 0);
-MODULE_PARM_DESC(num_tx_qps, "Number of TX-QPS");
MODULE_PARM_DESC(msg_level, "msg_level");
MODULE_PARM_DESC(prop_carrier_state, "Propagate carrier state of physical "
"port to stack. 1:yes, 0:no. Default = 0 ");
@@ -172,7 +169,7 @@ static void ehea_update_firmware_handles
continue;
num_ports++;
- num_portres += port->num_def_qps + port->num_add_tx_qps;
+ num_portres += port->num_def_qps;
}
}
@@ -198,9 +195,7 @@ static void ehea_update_firmware_handles
(num_ports == 0))
continue;
- for (l = 0;
- l < port->num_def_qps + port->num_add_tx_qps;
- l++) {
+ for (l = 0; l < port->num_def_qps; l++) {
struct ehea_port_res *pr = &port->port_res[l];
arr[i].adh = adapter->handle;
@@ -360,7 +355,7 @@ static struct net_device_stats *ehea_get
}
tx_packets = 0;
- for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
+ for (i = 0; i < port->num_def_qps; i++) {
tx_packets += port->port_res[i].tx_packets;
tx_bytes += port->port_res[i].tx_bytes;
}
@@ -814,7 +809,7 @@ static void reset_sq_restart_flag(struct
{
int i;
- for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
+ for (i = 0; i < port->num_def_qps; i++) {
struct ehea_port_res *pr = &port->port_res[i];
pr->sq_restart_flag = 0;
}
@@ -827,7 +822,7 @@ static void check_sqs(struct ehea_port *
int swqe_index;
int i, k;
- for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
+ for (i = 0; i < port->num_def_qps; i++) {
struct ehea_port_res *pr = &port->port_res[i];
int ret;
k = 0;
@@ -1117,13 +1112,6 @@ int ehea_sense_port_attr(struct ehea_por
goto out_free;
}
- port->num_tx_qps = num_tx_qps;
-
- if (port->num_def_qps >= port->num_tx_qps)
- port->num_add_tx_qps = 0;
- else
- port->num_add_tx_qps = port->num_tx_qps - port->num_def_qps;
-
ret = 0;
out_free:
if (ret || netif_msg_probe(port))
@@ -1364,7 +1352,7 @@ static int ehea_reg_interrupts(struct ne
port->qp_eq->attr.ist1);
- for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
+ for (i = 0; i < port->num_def_qps; i++) {
pr = &port->port_res[i];
snprintf(pr->int_send_name, EHEA_IRQ_NAME_SIZE - 1,
"%s-queue%d", dev->name, i);
@@ -1407,7 +1395,7 @@ static void ehea_free_interrupts(struct
/* send */
- for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
+ for (i = 0; i < port->num_def_qps; i++) {
pr = &port->port_res[i];
ibmebus_free_irq(pr->eq->attr.ist1, pr);
netif_info(port, intr, dev,
@@ -2476,8 +2464,7 @@ out:
return ret;
}
-static int ehea_port_res_setup(struct ehea_port *port, int def_qps,
- int add_tx_qps)
+static int ehea_port_res_setup(struct ehea_port *port, int def_qps)
{
int ret, i;
struct port_res_cfg pr_cfg, pr_cfg_small_rx;
@@ -2510,7 +2497,7 @@ static int ehea_port_res_setup(struct eh
if (ret)
goto out_clean_pr;
}
- for (i = def_qps; i < def_qps + add_tx_qps; i++) {
+ for (i = def_qps; i < def_qps; i++) {
ret = ehea_init_port_res(port, &port->port_res[i],
&pr_cfg_small_rx, i);
if (ret)
@@ -2533,7 +2520,7 @@ static int ehea_clean_all_portres(struct
int ret = 0;
int i;
- for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++)
+ for (i = 0; i < port->num_def_qps; i++)
ret |= ehea_clean_portres(port, &port->port_res[i]);
ret |= ehea_destroy_eq(port->qp_eq);
@@ -2565,8 +2552,7 @@ static int ehea_up(struct net_device *de
if (port->state == EHEA_PORT_UP)
return 0;
- ret = ehea_port_res_setup(port, port->num_def_qps,
- port->num_add_tx_qps);
+ ret = ehea_port_res_setup(port, port->num_def_qps);
if (ret) {
netdev_err(dev, "port_res_failed\n");
goto out;
@@ -2585,7 +2571,7 @@ static int ehea_up(struct net_device *de
goto out_clean_pr;
}
- for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
+ for (i = 0; i < port->num_def_qps; i++) {
ret = ehea_activate_qp(port->adapter, port->port_res[i].qp);
if (ret) {
netdev_err(dev, "activate_qp failed\n");
@@ -2631,7 +2617,7 @@ static void port_napi_disable(struct ehe
{
int i;
- for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++)
+ for (i = 0; i < port->num_def_qps; i++)
napi_disable(&port->port_res[i].napi);
}
@@ -2639,7 +2625,7 @@ static void port_napi_enable(struct ehea
{
int i;
- for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++)
+ for (i = 0; i < port->num_def_qps; i++)
napi_enable(&port->port_res[i].napi);
}
@@ -2728,7 +2714,7 @@ static void ehea_flush_sq(struct ehea_po
{
int i;
- for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
+ for (i = 0; i < port->num_def_qps; i++) {
struct ehea_port_res *pr = &port->port_res[i];
int swqe_max = pr->sq_skba_size - 2 - pr->swqe_ll_count;
int ret;
@@ -2762,7 +2748,7 @@ int ehea_stop_qps(struct net_device *dev
goto out;
}
- for (i = 0; i < (port->num_def_qps + port->num_add_tx_qps); i++) {
+ for (i = 0; i < (port->num_def_qps); i++) {
struct ehea_port_res *pr = &port->port_res[i];
struct ehea_qp *qp = pr->qp;
@@ -2864,7 +2850,7 @@ int ehea_restart_qps(struct net_device *
goto out;
}
- for (i = 0; i < (port->num_def_qps + port->num_add_tx_qps); i++) {
+ for (i = 0; i < (port->num_def_qps); i++) {
struct ehea_port_res *pr = &port->port_res[i];
struct ehea_qp *qp = pr->qp;
@@ -3221,8 +3207,7 @@ struct ehea_port *ehea_setup_single_port
goto out_free_mc_list;
netif_set_real_num_rx_queues(dev, port->num_def_qps);
- netif_set_real_num_tx_queues(dev, port->num_def_qps +
- port->num_add_tx_qps);
+ netif_set_real_num_tx_queues(dev, port->num_def_qps);
port_dev = ehea_register_port(port, dn);
if (!port_dev)
next prev parent reply other threads:[~2011-04-05 11:32 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-05 11:28 [PATCH 1/14] ehea: Remove NETIF_F_LLTX Anton Blanchard
2011-04-05 11:29 ` [PATCH 2/14] ehea: Update multiqueue support Anton Blanchard
2011-04-11 1:13 ` Michael Ellerman
2011-04-05 11:30 ` [PATCH 3/14] ehea: Remove force_irq logic in napi poll routine Anton Blanchard
2011-04-05 11:32 ` Anton Blanchard [this message]
2011-04-05 11:33 ` [PATCH 5/14] ehea: Don't check NETIF_F_TSO in TX path Anton Blanchard
2011-04-05 11:35 ` [PATCH 6/14] ehea: Add vlan_features Anton Blanchard
2011-04-05 11:36 ` [PATCH 7/14] ehea: Allocate large enough skbs to avoid partial cacheline DMA writes Anton Blanchard
2011-04-05 11:39 ` [PATCH 8/14] ehea: Simplify ehea_xmit2 and ehea_xmit3 Anton Blanchard
2011-04-05 11:40 ` [PATCH 9/14] ehea: Merge swqe2 TSO and non TSO paths Anton Blanchard
2011-04-05 11:41 ` [PATCH 10/14] ehea: Simplify type 3 transmit routine Anton Blanchard
2011-04-05 11:41 ` [PATCH 11/14] ehea: Remove some unused definitions Anton Blanchard
2011-04-05 11:42 ` [PATCH 12/14] ehea: Add some more ethtool operations and 64bit stats Anton Blanchard
2011-04-05 13:07 ` Ben Hutchings
2011-04-05 21:35 ` Anton Blanchard
2011-04-05 11:43 ` [PATCH 13/14] ehea: Remove LRO support Anton Blanchard
2011-04-05 11:45 ` [PATCH 14/14] ehea: Add GRO support Anton Blanchard
2011-04-05 21:29 ` Jesse Gross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110405213238.711c9b80@kryten \
--to=anton@samba.org \
--cc=leitao@linux.vnet.ibm.com \
--cc=michael@ellerman.id.au \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).