* [PATCH net-next 5/5] be2net: add code to display default value of tx rate for VFs
@ 2011-04-18 22:30 Ajit Khaparde
0 siblings, 0 replies; 2+ messages in thread
From: Ajit Khaparde @ 2011-04-18 22:30 UTC (permalink / raw)
To: davem; +Cc: netdev
This change will allow the default value of tx rate to be displayed
when ip link show is called on a PF interface.
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
---
drivers/net/benet/be_main.c | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 94a9c4a..30fbb3b 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -3068,9 +3068,22 @@ static int __devinit be_probe(struct pci_dev *pdev,
netif_carrier_off(netdev);
if (be_physfn(adapter) && adapter->sriov_enabled) {
+ u8 mac_speed;
+ bool link_up;
+ u16 vf, lnk_speed;
+
status = be_vf_eth_addr_config(adapter);
if (status)
goto unreg_netdev;
+
+ for (vf = 0; vf < num_vfs; vf++) {
+ status = be_cmd_link_status_query(adapter, &link_up,
+ &mac_speed, &lnk_speed, vf + 1);
+ if (!status)
+ adapter->vf_cfg[vf].vf_tx_rate = lnk_speed * 10;
+ else
+ goto unreg_netdev;
+ }
}
dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num);
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH net-next 5/5] be2net: add code to display default value of tx rate for VFs
@ 2011-04-19 22:11 Ajit Khaparde
0 siblings, 0 replies; 2+ messages in thread
From: Ajit Khaparde @ 2011-04-19 22:11 UTC (permalink / raw)
To: davem; +Cc: netdev
This change will allow the default value of tx rate to be displayed
when ip link show is called on a PF interface.
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
---
drivers/net/benet/be_main.c | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 77a6e7e..3529400 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -3082,9 +3082,22 @@ static int __devinit be_probe(struct pci_dev *pdev,
netif_carrier_off(netdev);
if (be_physfn(adapter) && adapter->sriov_enabled) {
+ u8 mac_speed;
+ bool link_up;
+ u16 vf, lnk_speed;
+
status = be_vf_eth_addr_config(adapter);
if (status)
goto unreg_netdev;
+
+ for (vf = 0; vf < num_vfs; vf++) {
+ status = be_cmd_link_status_query(adapter, &link_up,
+ &mac_speed, &lnk_speed, vf + 1);
+ if (!status)
+ adapter->vf_cfg[vf].vf_tx_rate = lnk_speed * 10;
+ else
+ goto unreg_netdev;
+ }
}
dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num);
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-04-19 22:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-04-18 22:30 [PATCH net-next 5/5] be2net: add code to display default value of tx rate for VFs Ajit Khaparde
-- strict thread matches above, loose matches on Subject: below --
2011-04-19 22:11 Ajit Khaparde
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).