[net-next-2.6 00/12][pull request] Intel Wired LAN Driver Update

[net-next-2.6 00/12][pull request] Intel Wired LAN Driver Update

[Jeff Kirsher]

The following series contains updates to e1000e and ixgbe.

- e1000e: convert to new set_phys_id interface

- ixgbe: several cleanups and fixes, as well as the conversion
  to the new set_phys_id interface and driver version bump.

The following are changes since commit 2bd93d7af1581d40e3c4b25242472661cb7c637a:
  Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
and are available in the git repository at:
  master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6 master

Alexander Duyck (1):
  ixgbe: remove ntuple display support

Bruce Allan (1):
  e1000e: implement ethtool set_phys_id

Don Skidmore (3):
  ixgbe: enable SCTP checksum offload for X540
  ixgbe: Bump version
  ixgbe: fix X540 ethtool loopback test.

Emil Tantilov (5):
  ixgbe: explicitly disable 100H for x540
  ixgbe: register defines cleanup
  ixgbe: add support for 64k EEPROM for 82599
  ixgbe: add LED blink code for x540
  ixgbe: convert to ethtool set_phys_id

John Fastabend (1):
  ixgbe: fix static functions

Yi Zou (1):
  ixgbe: do not clear FCoE DDP error status for received ABTS

 drivers/net/e1000e/82571.c          |    2 +
 drivers/net/e1000e/e1000.h          |    6 +-
 drivers/net/e1000e/es2lan.c         |    1 +
 drivers/net/e1000e/ethtool.c        |   71 ++++---------
 drivers/net/e1000e/hw.h             |    1 +
 drivers/net/e1000e/ich8lan.c        |    4 +
 drivers/net/e1000e/lib.c            |    4 +-
 drivers/net/e1000e/netdev.c         |    2 -
 drivers/net/ixgbe/ixgbe.h           |    1 +
 drivers/net/ixgbe/ixgbe_82599.c     |   33 ++++++-
 drivers/net/ixgbe/ixgbe_dcb_82598.c |    2 +-
 drivers/net/ixgbe/ixgbe_ethtool.c   |   39 +++++---
 drivers/net/ixgbe/ixgbe_fcoe.c      |    4 +-
 drivers/net/ixgbe/ixgbe_main.c      |   19 ++--
 drivers/net/ixgbe/ixgbe_mbx.h       |    3 -
 drivers/net/ixgbe/ixgbe_phy.c       |    3 +-
 drivers/net/ixgbe/ixgbe_sriov.c     |    2 +-
 drivers/net/ixgbe/ixgbe_type.h      |  189 +++++++++++++++++++++++------------
 drivers/net/ixgbe/ixgbe_x540.c      |   64 ++++++++++++-
 19 files changed, 292 insertions(+), 158 deletions(-)

-- 
1.7.4.4

[net-next-2.6 01/12] e1000e: implement ethtool set_phys_id

[Jeff Kirsher]

From: Bruce Allan <bruce.w.allan@intel.com>

Based on a patch from Stephen Hemminger <shemminger@vyatta.com>.

The new ethtool set_phys_id takes over controlling the LED for
identifying boards.  This fixes the lockout during that period.
For this device lots of extra infrastructure can also be removed by
using set_phys_id.

v2: - return blink frequency for parts that do not support blink in h/w
    - add blink_led function pointers for devices that do support blink
      in h/w to cleanup the test for this functionality

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/e1000e/82571.c   |    2 +
 drivers/net/e1000e/e1000.h   |    6 +---
 drivers/net/e1000e/es2lan.c  |    1 +
 drivers/net/e1000e/ethtool.c |   71 ++++++++++++-----------------------------
 drivers/net/e1000e/hw.h      |    1 +
 drivers/net/e1000e/ich8lan.c |    4 ++
 drivers/net/e1000e/lib.c     |    4 +-
 drivers/net/e1000e/netdev.c  |    2 -
 8 files changed, 32 insertions(+), 59 deletions(-)

diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index ae07d37..8295f21 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -300,6 +300,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 		func->set_lan_id = e1000_set_lan_id_single_port;
 		func->check_mng_mode = e1000e_check_mng_mode_generic;
 		func->led_on = e1000e_led_on_generic;
+		func->blink_led = e1000e_blink_led_generic;
 
 		/* FWSM register */
 		mac->has_fwsm = true;
@@ -320,6 +321,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 	default:
 		func->check_mng_mode = e1000e_check_mng_mode_generic;
 		func->led_on = e1000e_led_on_generic;
+		func->blink_led = e1000e_blink_led_generic;
 
 		/* FWSM register */
 		mac->has_fwsm = true;
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 3be5478..9549879 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -391,13 +391,10 @@ struct e1000_adapter {
 
 	bool fc_autoneg;
 
-	unsigned long led_status;
-
 	unsigned int flags;
 	unsigned int flags2;
 	struct work_struct downshift_task;
 	struct work_struct update_phy_task;
-	struct work_struct led_blink_task;
 	struct work_struct print_hang_task;
 
 	bool idle_check;
@@ -487,7 +484,6 @@ extern const char e1000e_driver_version[];
 
 extern void e1000e_check_options(struct e1000_adapter *adapter);
 extern void e1000e_set_ethtool_ops(struct net_device *netdev);
-extern void e1000e_led_blink_task(struct work_struct *work);
 
 extern int e1000e_up(struct e1000_adapter *adapter);
 extern void e1000e_down(struct e1000_adapter *adapter);
@@ -575,7 +571,7 @@ extern s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data);
 extern void e1000e_config_collision_dist(struct e1000_hw *hw);
 extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
 extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
-extern s32 e1000e_blink_led(struct e1000_hw *hw);
+extern s32 e1000e_blink_led_generic(struct e1000_hw *hw);
 extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
 extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
 extern void e1000e_reset_adaptive(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 0279695..f4bbeb2 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -1434,6 +1434,7 @@ static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
 static struct e1000_mac_operations es2_mac_ops = {
 	.read_mac_addr		= e1000_read_mac_addr_80003es2lan,
 	.id_led_init		= e1000e_id_led_init,
+	.blink_led		= e1000e_blink_led_generic,
 	.check_mng_mode		= e1000e_check_mng_mode_generic,
 	/* check_for_link dependent on media type */
 	.cleanup_led		= e1000e_cleanup_led_generic,
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index a31d280..1d7bf40 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1851,64 +1851,35 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	return 0;
 }
 
-/* toggle LED 4 times per second = 2 "blinks" per second */
-#define E1000_ID_INTERVAL	(HZ/4)
-
-/* bit defines for adapter->led_status */
-#define E1000_LED_ON		0
-
-void e1000e_led_blink_task(struct work_struct *work)
-{
-	struct e1000_adapter *adapter = container_of(work,
-	                                struct e1000_adapter, led_blink_task);
-
-	if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
-		adapter->hw.mac.ops.led_off(&adapter->hw);
-	else
-		adapter->hw.mac.ops.led_on(&adapter->hw);
-}
-
-static void e1000_led_blink_callback(unsigned long data)
-{
-	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
-
-	schedule_work(&adapter->led_blink_task);
-	mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
-}
-
-static int e1000_phys_id(struct net_device *netdev, u32 data)
+static int e1000_set_phys_id(struct net_device *netdev,
+			     enum ethtool_phys_id_state state)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
-	if (!data)
-		data = INT_MAX;
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		if (!hw->mac.ops.blink_led)
+			return 2;	/* cycle on/off twice per second */
 
-	if ((hw->phy.type == e1000_phy_ife) ||
-	    (hw->mac.type == e1000_pchlan) ||
-	    (hw->mac.type == e1000_pch2lan) ||
-	    (hw->mac.type == e1000_82583) ||
-	    (hw->mac.type == e1000_82574)) {
-		if (!adapter->blink_timer.function) {
-			init_timer(&adapter->blink_timer);
-			adapter->blink_timer.function =
-				e1000_led_blink_callback;
-			adapter->blink_timer.data = (unsigned long) adapter;
-		}
-		mod_timer(&adapter->blink_timer, jiffies);
-		msleep_interruptible(data * 1000);
-		del_timer_sync(&adapter->blink_timer);
+		hw->mac.ops.blink_led(hw);
+		break;
+
+	case ETHTOOL_ID_INACTIVE:
 		if (hw->phy.type == e1000_phy_ife)
 			e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
-	} else {
-		e1000e_blink_led(hw);
-		msleep_interruptible(data * 1000);
-	}
+		hw->mac.ops.led_off(hw);
+		hw->mac.ops.cleanup_led(hw);
+		break;
 
-	hw->mac.ops.led_off(hw);
-	clear_bit(E1000_LED_ON, &adapter->led_status);
-	hw->mac.ops.cleanup_led(hw);
+	case ETHTOOL_ID_ON:
+		adapter->hw.mac.ops.led_on(&adapter->hw);
+		break;
 
+	case ETHTOOL_ID_OFF:
+		adapter->hw.mac.ops.led_off(&adapter->hw);
+		break;
+	}
 	return 0;
 }
 
@@ -2074,7 +2045,7 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.set_tso		= e1000_set_tso,
 	.self_test		= e1000_diag_test,
 	.get_strings		= e1000_get_strings,
-	.phys_id		= e1000_phys_id,
+	.set_phys_id		= e1000_set_phys_id,
 	.get_ethtool_stats	= e1000_get_ethtool_stats,
 	.get_sset_count		= e1000e_get_sset_count,
 	.get_coalesce		= e1000_get_coalesce,
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 307e1ec..6c2fa83 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -756,6 +756,7 @@ struct e1000_host_mng_command_info {
 /* Function pointers and static data for the MAC. */
 struct e1000_mac_operations {
 	s32  (*id_led_init)(struct e1000_hw *);
+	s32  (*blink_led)(struct e1000_hw *);
 	bool (*check_mng_mode)(struct e1000_hw *);
 	s32  (*check_for_link)(struct e1000_hw *);
 	s32  (*cleanup_led)(struct e1000_hw *);
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 06ff884..3369d1f 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -564,6 +564,8 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 		mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
 		/* ID LED init */
 		mac->ops.id_led_init = e1000e_id_led_init;
+		/* blink LED */
+		mac->ops.blink_led = e1000e_blink_led_generic;
 		/* setup LED */
 		mac->ops.setup_led = e1000e_setup_led_generic;
 		/* cleanup LED */
@@ -767,6 +769,8 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	     (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) {
 		adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
 		adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
+
+		hw->mac.ops.blink_led = NULL;
 	}
 
 	if ((adapter->hw.mac.type == e1000_ich8lan) &&
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 30ef8fa..6432dda 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -1530,12 +1530,12 @@ s32 e1000e_cleanup_led_generic(struct e1000_hw *hw)
 }
 
 /**
- *  e1000e_blink_led - Blink LED
+ *  e1000e_blink_led_generic - Blink LED
  *  @hw: pointer to the HW structure
  *
  *  Blink the LEDs which are set to be on.
  **/
-s32 e1000e_blink_led(struct e1000_hw *hw)
+s32 e1000e_blink_led_generic(struct e1000_hw *hw)
 {
 	u32 ledctl_blink = 0;
 	u32 i;
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 4deb67d..0939040 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -6020,7 +6020,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
 	INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
 	INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
-	INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
 
 	/* Initialize link parameters. User can change them with ethtool */
 	adapter->hw.mac.autoneg = 1;
@@ -6153,7 +6152,6 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	cancel_work_sync(&adapter->watchdog_task);
 	cancel_work_sync(&adapter->downshift_task);
 	cancel_work_sync(&adapter->update_phy_task);
-	cancel_work_sync(&adapter->led_blink_task);
 	cancel_work_sync(&adapter->print_hang_task);
 
 	if (!(netdev->flags & IFF_UP))
-- 
1.7.4.4

[net-next-2.6 02/12] ixgbe: explicitly disable 100H for x540

[Jeff Kirsher]

From: Emil Tantilov <emil.s.tantilov@intel.com>

100H is not supported on this HW, but the bit is set on the PHY.
This can result in link at 100F when advertising only 1000F.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_phy.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index fd381ea..edcaaeb 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -657,7 +657,8 @@ s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
 				     MDIO_MMD_AN,
 				     &autoneg_reg);
 
-		autoneg_reg &= ~ADVERTISE_100FULL;
+		autoneg_reg &= ~(ADVERTISE_100FULL |
+				 ADVERTISE_100HALF);
 		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
 			autoneg_reg |= ADVERTISE_100FULL;
 
-- 
1.7.4.4

[net-next-2.6 03/12] ixgbe: register defines cleanup

[Jeff Kirsher]

From: Emil Tantilov <emil.s.tantilov@intel.com>

Remove duplicates.
Fix incorrect defines.
Fix/Update comments.
Fix whitespace.
Add new register defines.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_mbx.h  |    3 -
 drivers/net/ixgbe/ixgbe_type.h |  189 ++++++++++++++++++++++++++--------------
 2 files changed, 125 insertions(+), 67 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_mbx.h b/drivers/net/ixgbe/ixgbe_mbx.h
index fe6ea81..f53dc5b 100644
--- a/drivers/net/ixgbe/ixgbe_mbx.h
+++ b/drivers/net/ixgbe/ixgbe_mbx.h
@@ -36,9 +36,6 @@
 #define IXGBE_VFMAILBOX             0x002FC
 #define IXGBE_VFMBMEM               0x00200
 
-#define IXGBE_PFMAILBOX(x)          (0x04B00 + (4 * x))
-#define IXGBE_PFMBMEM(vfn)          (0x13000 + (64 * vfn))
-
 #define IXGBE_PFMAILBOX_STS   0x00000001 /* Initiate message send to VF */
 #define IXGBE_PFMAILBOX_ACK   0x00000002 /* Ack message recv'd from VF */
 #define IXGBE_PFMAILBOX_VFU   0x00000004 /* VF owns the mailbox buffer */
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index f5bec97..fab9737 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -164,6 +164,9 @@
                          (0x0D018 + ((_i - 64) * 0x40)))
 #define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : \
                           (0x0D028 + ((_i - 64) * 0x40)))
+#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \
+                          (0x0D02C + ((_i - 64) * 0x40)))
+#define IXGBE_RSCDBU     0x03028
 #define IXGBE_RDDCC      0x02F20
 #define IXGBE_RXMEMWRAP  0x03190
 #define IXGBE_STARCTRL   0x03024
@@ -228,17 +231,23 @@
 #define IXGBE_VLVF(_i)  (0x0F100 + ((_i) * 4))  /* 64 of these (0-63) */
 #define IXGBE_VLVFB(_i) (0x0F200 + ((_i) * 4))  /* 128 of these (0-127) */
 #define IXGBE_VMVIR(_i) (0x08000 + ((_i) * 4))  /* 64 of these (0-63) */
-#define IXGBE_VT_CTL    0x051B0
-#define IXGBE_VFRE(_i)  (0x051E0 + ((_i) * 4))
-#define IXGBE_VFTE(_i)  (0x08110 + ((_i) * 4))
-#define IXGBE_VMECM(_i) (0x08790 + ((_i) * 4))
-#define IXGBE_QDE       0x2F04
-#define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */
-#define IXGBE_UTA(_i)   (0x0F400 + ((_i) * 4))
-#define IXGBE_VMRCTL(_i)        (0x0F600 + ((_i) * 4))
-#define IXGBE_VMRVLAN(_i)       (0x0F610 + ((_i) * 4))
-#define IXGBE_VMRVM(_i)         (0x0F630 + ((_i) * 4))
-#define IXGBE_L34T_IMIR(_i)      (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/
+#define IXGBE_VT_CTL         0x051B0
+#define IXGBE_PFMAILBOX(_i)  (0x04B00 + (4 * (_i))) /* 64 total */
+#define IXGBE_PFMBMEM(_i)    (0x13000 + (64 * (_i))) /* 64 Mailboxes, 16 DW each */
+#define IXGBE_PFMBICR(_i)    (0x00710 + (4 * (_i))) /* 4 total */
+#define IXGBE_PFMBIMR(_i)    (0x00720 + (4 * (_i))) /* 4 total */
+#define IXGBE_VFRE(_i)       (0x051E0 + ((_i) * 4))
+#define IXGBE_VFTE(_i)       (0x08110 + ((_i) * 4))
+#define IXGBE_VMECM(_i)      (0x08790 + ((_i) * 4))
+#define IXGBE_QDE            0x2F04
+#define IXGBE_VMTXSW(_i)     (0x05180 + ((_i) * 4)) /* 2 total */
+#define IXGBE_VMOLR(_i)      (0x0F000 + ((_i) * 4)) /* 64 total */
+#define IXGBE_UTA(_i)        (0x0F400 + ((_i) * 4))
+#define IXGBE_MRCTL(_i)      (0x0F600 + ((_i) * 4))
+#define IXGBE_VMRVLAN(_i)    (0x0F610 + ((_i) * 4))
+#define IXGBE_VMRVM(_i)      (0x0F630 + ((_i) * 4))
+#define IXGBE_L34T_IMIR(_i)  (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/
+#define IXGBE_RXFECCERR0         0x051B8
 #define IXGBE_LLITHRESH 0x0EC90
 #define IXGBE_IMIR(_i)  (0x05A80 + ((_i) * 4))  /* 8 of these (0-7) */
 #define IXGBE_IMIREXT(_i)       (0x05AA0 + ((_i) * 4))  /* 8 of these (0-7) */
@@ -365,7 +374,7 @@
 #define IXGBE_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */
 #define IXGBE_WUFC_FLX_FILTERS     0x000F0000 /* Mask for 4 flex filters */
 #define IXGBE_WUFC_EXT_FLX_FILTERS 0x00300000 /* Mask for Ext. flex filters */
-#define IXGBE_WUFC_ALL_FILTERS     0x003F00FF /* Mask for all 6 wakeup filters*/
+#define IXGBE_WUFC_ALL_FILTERS     0x003F00FF /* Mask for all wakeup filters */
 #define IXGBE_WUFC_FLX_OFFSET      16 /* Offset to the Flexible Filters bits */
 
 /* Wake Up Status */
@@ -407,7 +416,6 @@
 #define IXGBE_SECTXSTAT         0x08804
 #define IXGBE_SECTXBUFFAF       0x08808
 #define IXGBE_SECTXMINIFG       0x08810
-#define IXGBE_SECTXSTAT         0x08804
 #define IXGBE_SECRXCTRL         0x08D00
 #define IXGBE_SECRXSTAT         0x08D04
 
@@ -500,21 +508,6 @@
 
 #define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE    0x4
 
-/* HW RSC registers */
-#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \
-                          (0x0D02C + ((_i - 64) * 0x40)))
-#define IXGBE_RSCDBU      0x03028
-#define IXGBE_RSCCTL_RSCEN          0x01
-#define IXGBE_RSCCTL_MAXDESC_1      0x00
-#define IXGBE_RSCCTL_MAXDESC_4      0x04
-#define IXGBE_RSCCTL_MAXDESC_8      0x08
-#define IXGBE_RSCCTL_MAXDESC_16     0x0C
-#define IXGBE_RXDADV_RSCCNT_SHIFT     17
-#define IXGBE_GPIE_RSC_DELAY_SHIFT    11
-#define IXGBE_RXDADV_RSCCNT_MASK    0x001E0000
-#define IXGBE_RSCDBU_RSCACKDIS      0x00000080
-#define IXGBE_RDRXCTL_RSCFRSTSIZE   0x003E0000
-
 /* DCB registers */
 #define IXGBE_RTRPCS      0x02430
 #define IXGBE_RTTDCS      0x04900
@@ -523,6 +516,7 @@
 #define IXGBE_RTRUP2TC    0x03020
 #define IXGBE_RTTUP2TC    0x0C800
 #define IXGBE_RTRPT4C(_i) (0x02140 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TXLLQ(_i)   (0x082E0 + ((_i) * 4)) /* 4 of these (0-3) */
 #define IXGBE_RTRPT4S(_i) (0x02160 + ((_i) * 4)) /* 8 of these (0-7) */
 #define IXGBE_RTTDT2C(_i) (0x04910 + ((_i) * 4)) /* 8 of these (0-7) */
 #define IXGBE_RTTDT2S(_i) (0x04930 + ((_i) * 4)) /* 8 of these (0-7) */
@@ -541,7 +535,7 @@
 	(IXGBE_RTTBCNRC_RF_DEC_MASK << IXGBE_RTTBCNRC_RF_INT_SHIFT)
 
 
-/* FCoE registers */
+/* FCoE DMA Context Registers */
 #define IXGBE_FCPTRL    0x02410 /* FC User Desc. PTR Low */
 #define IXGBE_FCPTRH    0x02414 /* FC USer Desc. PTR High */
 #define IXGBE_FCBUFF    0x02418 /* FC Buffer Control */
@@ -743,17 +737,10 @@
 #define IXGBE_PBACLR_82599      0x11068
 #define IXGBE_CIAA_82599        0x11088
 #define IXGBE_CIAD_82599        0x1108C
-#define IXGBE_PCIE_DIAG_0_82599 0x11090
-#define IXGBE_PCIE_DIAG_1_82599 0x11094
-#define IXGBE_PCIE_DIAG_2_82599 0x11098
-#define IXGBE_PCIE_DIAG_3_82599 0x1109C
-#define IXGBE_PCIE_DIAG_4_82599 0x110A0
-#define IXGBE_PCIE_DIAG_5_82599 0x110A4
-#define IXGBE_PCIE_DIAG_6_82599 0x110A8
-#define IXGBE_PCIE_DIAG_7_82599 0x110C0
-#define IXGBE_INTRPT_CSR_82599  0x110B0
-#define IXGBE_INTRPT_MASK_82599 0x110B8
+#define IXGBE_PICAUSE           0x110B0
+#define IXGBE_PIENA             0x110B8
 #define IXGBE_CDQ_MBR_82599     0x110B4
+#define IXGBE_PCIESPARE         0x110BC
 #define IXGBE_MISC_REG_82599    0x110F0
 #define IXGBE_ECC_CTRL_0_82599  0x11100
 #define IXGBE_ECC_CTRL_1_82599  0x11104
@@ -786,7 +773,19 @@
 #define IXGBE_SYSTIML    0x08C0C /* System time register Low - RO */
 #define IXGBE_SYSTIMH    0x08C10 /* System time register High - RO */
 #define IXGBE_TIMINCA    0x08C14 /* Increment attributes register - RW */
-#define IXGBE_RXUDP      0x08C1C /* Time Sync Rx UDP Port - RW */
+#define IXGBE_TIMADJL    0x08C18 /* Time Adjustment Offset register Low - RW */
+#define IXGBE_TIMADJH    0x08C1C /* Time Adjustment Offset register High - RW */
+#define IXGBE_TSAUXC     0x08C20 /* TimeSync Auxiliary Control register - RW */
+#define IXGBE_TRGTTIML0  0x08C24 /* Target Time Register 0 Low - RW */
+#define IXGBE_TRGTTIMH0  0x08C28 /* Target Time Register 0 High - RW */
+#define IXGBE_TRGTTIML1  0x08C2C /* Target Time Register 1 Low - RW */
+#define IXGBE_TRGTTIMH1  0x08C30 /* Target Time Register 1 High - RW */
+#define IXGBE_FREQOUT0   0x08C34 /* Frequency Out 0 Control register - RW */
+#define IXGBE_FREQOUT1   0x08C38 /* Frequency Out 1 Control register - RW */
+#define IXGBE_AUXSTMPL0  0x08C3C /* Auxiliary Time Stamp 0 register Low - RO */
+#define IXGBE_AUXSTMPH0  0x08C40 /* Auxiliary Time Stamp 0 register High - RO */
+#define IXGBE_AUXSTMPL1  0x08C44 /* Auxiliary Time Stamp 1 register Low - RO */
+#define IXGBE_AUXSTMPH1  0x08C48 /* Auxiliary Time Stamp 1 register High - RO */
 
 /* Diagnostic Registers */
 #define IXGBE_RDSTATCTL   0x02C20
@@ -830,8 +829,20 @@
 #define IXGBE_TXDATARDPTR(_i)   (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/
 #define IXGBE_TXDESCRDPTR(_i)   (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/
 #define IXGBE_PCIEECCCTL 0x1106C
+#define IXGBE_RXWRPTR(_i)       (0x03100 + ((_i) * 4)) /* 8 of these 3100-310C*/
+#define IXGBE_RXUSED(_i)        (0x03120 + ((_i) * 4)) /* 8 of these 3120-312C*/
+#define IXGBE_RXRDPTR(_i)       (0x03140 + ((_i) * 4)) /* 8 of these 3140-314C*/
+#define IXGBE_RXRDWRPTR(_i)     (0x03160 + ((_i) * 4)) /* 8 of these 3160-310C*/
+#define IXGBE_TXWRPTR(_i)       (0x0C100 + ((_i) * 4)) /* 8 of these C100-C10C*/
+#define IXGBE_TXUSED(_i)        (0x0C120 + ((_i) * 4)) /* 8 of these C120-C12C*/
+#define IXGBE_TXRDPTR(_i)       (0x0C140 + ((_i) * 4)) /* 8 of these C140-C14C*/
+#define IXGBE_TXRDWRPTR(_i)     (0x0C160 + ((_i) * 4)) /* 8 of these C160-C10C*/
 #define IXGBE_PCIEECCCTL0 0x11100
 #define IXGBE_PCIEECCCTL1 0x11104
+#define IXGBE_RXDBUECC  0x03F70
+#define IXGBE_TXDBUECC  0x0CF70
+#define IXGBE_RXDBUEST 0x03F74
+#define IXGBE_TXDBUEST 0x0CF74
 #define IXGBE_PBTXECC   0x0C300
 #define IXGBE_PBRXECC   0x03300
 #define IXGBE_GHECCR    0x110B0
@@ -872,6 +883,7 @@
 #define IXGBE_AUTOC3    0x042AC
 #define IXGBE_ANLP1     0x042B0
 #define IXGBE_ANLP2     0x042B4
+#define IXGBE_MACC      0x04330
 #define IXGBE_ATLASCTL  0x04800
 #define IXGBE_MMNGC     0x042D0
 #define IXGBE_ANLPNP1   0x042D4
@@ -884,14 +896,49 @@
 #define IXGBE_MPVC      0x04318
 #define IXGBE_SGMIIC    0x04314
 
+/* Statistics Registers */
+#define IXGBE_RXNFGPC      0x041B0
+#define IXGBE_RXNFGBCL     0x041B4
+#define IXGBE_RXNFGBCH     0x041B8
+#define IXGBE_RXDGPC       0x02F50
+#define IXGBE_RXDGBCL      0x02F54
+#define IXGBE_RXDGBCH      0x02F58
+#define IXGBE_RXDDGPC      0x02F5C
+#define IXGBE_RXDDGBCL     0x02F60
+#define IXGBE_RXDDGBCH     0x02F64
+#define IXGBE_RXLPBKGPC    0x02F68
+#define IXGBE_RXLPBKGBCL   0x02F6C
+#define IXGBE_RXLPBKGBCH   0x02F70
+#define IXGBE_RXDLPBKGPC   0x02F74
+#define IXGBE_RXDLPBKGBCL  0x02F78
+#define IXGBE_RXDLPBKGBCH  0x02F7C
+#define IXGBE_TXDGPC       0x087A0
+#define IXGBE_TXDGBCL      0x087A4
+#define IXGBE_TXDGBCH      0x087A8
+
+#define IXGBE_RXDSTATCTRL 0x02F40
+
+/* Copper Pond 2 link timeout */
 #define IXGBE_VALIDATE_LINK_READY_TIMEOUT 50
 
 /* Omer CORECTL */
 #define IXGBE_CORECTL           0x014F00
 /* BARCTRL */
-#define IXGBE_BARCTRL           0x110F4
-#define IXGBE_BARCTRL_FLSIZE    0x0700
-#define IXGBE_BARCTRL_CSRSIZE   0x2000
+#define IXGBE_BARCTRL               0x110F4
+#define IXGBE_BARCTRL_FLSIZE        0x0700
+#define IXGBE_BARCTRL_FLSIZE_SHIFT  8
+#define IXGBE_BARCTRL_CSRSIZE       0x2000
+
+/* RSCCTL Bit Masks */
+#define IXGBE_RSCCTL_RSCEN          0x01
+#define IXGBE_RSCCTL_MAXDESC_1      0x00
+#define IXGBE_RSCCTL_MAXDESC_4      0x04
+#define IXGBE_RSCCTL_MAXDESC_8      0x08
+#define IXGBE_RSCCTL_MAXDESC_16     0x0C
+
+/* RSCDBU Bit Masks */
+#define IXGBE_RSCDBU_RSCSMALDIS_MASK    0x0000007F
+#define IXGBE_RSCDBU_RSCACKDIS          0x00000080
 
 /* RDRXCTL Bit Masks */
 #define IXGBE_RDRXCTL_RDMTS_1_2     0x00000000 /* Rx Desc Min Threshold Size */
@@ -899,6 +946,8 @@
 #define IXGBE_RDRXCTL_MVMEN         0x00000020
 #define IXGBE_RDRXCTL_DMAIDONE      0x00000008 /* DMA init cycle done */
 #define IXGBE_RDRXCTL_AGGDIS        0x00010000 /* Aggregation disable */
+#define IXGBE_RDRXCTL_RSCFRSTSIZE   0x003E0000 /* RSC First packet size */
+#define IXGBE_RDRXCTL_RSCLLIDIS     0x00800000 /* Disable RSC compl on LLI */
 #define IXGBE_RDRXCTL_RSCACKC       0x02000000 /* must set 1 when RSC enabled */
 #define IXGBE_RDRXCTL_FCOE_WRFIX    0x04000000 /* must set 1 when RSC enabled */
 
@@ -970,8 +1019,8 @@
 #define IXGBE_MSCA_OP_CODE_SHIFT     26 /* OP CODE shift */
 #define IXGBE_MSCA_ADDR_CYCLE        0x00000000 /* OP CODE 00 (addr cycle) */
 #define IXGBE_MSCA_WRITE             0x04000000 /* OP CODE 01 (write) */
-#define IXGBE_MSCA_READ              0x08000000 /* OP CODE 10 (read) */
-#define IXGBE_MSCA_READ_AUTOINC      0x0C000000 /* OP CODE 11 (read, auto inc)*/
+#define IXGBE_MSCA_READ              0x0C000000 /* OP CODE 11 (read) */
+#define IXGBE_MSCA_READ_AUTOINC      0x08000000 /* OP CODE 10 (read, auto inc)*/
 #define IXGBE_MSCA_ST_CODE_MASK      0x30000000 /* ST Code mask */
 #define IXGBE_MSCA_ST_CODE_SHIFT     28 /* ST Code shift */
 #define IXGBE_MSCA_NEW_PROTOCOL      0x00000000 /* ST CODE 00 (new protocol) */
@@ -1058,6 +1107,7 @@
 #define IXGBE_GPIE_EIMEN         0x00000040 /* Immediate Interrupt Enable */
 #define IXGBE_GPIE_EIAME         0x40000000
 #define IXGBE_GPIE_PBA_SUPPORT   0x80000000
+#define IXGBE_GPIE_RSC_DELAY_SHIFT 11
 #define IXGBE_GPIE_VTMODE_MASK   0x0000C000 /* VT Mode Mask */
 #define IXGBE_GPIE_VTMODE_16     0x00004000 /* 16 VFs 8 queues per VF */
 #define IXGBE_GPIE_VTMODE_32     0x00008000 /* 32 VFs 4 queues per VF */
@@ -1292,6 +1342,11 @@
 #define IXGBE_FTQF_POOL_SHIFT           8
 #define IXGBE_FTQF_5TUPLE_MASK_MASK     0x0000001F
 #define IXGBE_FTQF_5TUPLE_MASK_SHIFT    25
+#define IXGBE_FTQF_SOURCE_ADDR_MASK     0x1E
+#define IXGBE_FTQF_DEST_ADDR_MASK       0x1D
+#define IXGBE_FTQF_SOURCE_PORT_MASK     0x1B
+#define IXGBE_FTQF_DEST_PORT_MASK       0x17
+#define IXGBE_FTQF_PROTOCOL_COMP_MASK   0x0F
 #define IXGBE_FTQF_POOL_MASK_EN         0x40000000
 #define IXGBE_FTQF_QUEUE_ENABLE         0x80000000
 
@@ -1334,11 +1389,11 @@
  *
  * Current filters:
  *    EAPOL 802.1x (0x888e): Filter 0
- *    BCN (0x8904):          Filter 1
+ *    FCoE (0x8906):         Filter 2
  *    1588 (0x88f7):         Filter 3
+ *    FIP  (0x8914):         Filter 4
  */
 #define IXGBE_ETQF_FILTER_EAPOL          0
-#define IXGBE_ETQF_FILTER_BCN            1
 #define IXGBE_ETQF_FILTER_FCOE           2
 #define IXGBE_ETQF_FILTER_1588           3
 #define IXGBE_ETQF_FILTER_FIP            4
@@ -1449,6 +1504,11 @@
 #define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
 #define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
 
+#define IXGBE_MACC_FLU       0x00000001
+#define IXGBE_MACC_FSV_10G   0x00030000
+#define IXGBE_MACC_FS        0x00040000
+#define IXGBE_MAC_RX2TX_LPBK 0x00000002
+
 /* LINKS Bit Masks */
 #define IXGBE_LINKS_KX_AN_COMP  0x80000000
 #define IXGBE_LINKS_UP          0x40000000
@@ -1502,7 +1562,6 @@
 #define IXGBE_ANLP1_ASM_PAUSE           0x0800
 #define IXGBE_ANLP1_AN_STATE_MASK       0x000f0000
 
-
 /* SW Semaphore Register bitmasks */
 #define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
 #define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
@@ -1515,6 +1574,10 @@
 #define IXGBE_GSSR_PHY1_SM    0x0004
 #define IXGBE_GSSR_MAC_CSR_SM 0x0008
 #define IXGBE_GSSR_FLASH_SM   0x0010
+#define IXGBE_GSSR_SW_MNG_SM  0x0400
+
+/* FW Status register bitmask */
+#define IXGBE_FWSTS_FWRI    0x00000200 /* Firmware Reset Indication */
 
 /* EEC Register */
 #define IXGBE_EEC_SK        0x00000001 /* EEPROM Clock */
@@ -1535,6 +1598,7 @@
 /* EEPROM Addressing bits based on type (0-small, 1-large) */
 #define IXGBE_EEC_ADDR_SIZE 0x00000400
 #define IXGBE_EEC_SIZE      0x00007800 /* EEPROM Size */
+#define IXGBE_EERD_MAX_ADDR 0x00003FFF /* EERD alows 14 bits for addr. */
 
 #define IXGBE_EEC_SIZE_SHIFT          11
 #define IXGBE_EEPROM_WORD_SIZE_SHIFT  6
@@ -1564,8 +1628,10 @@
 #define IXGBE_FW_PTR            0x0F
 #define IXGBE_PBANUM0_PTR       0x15
 #define IXGBE_PBANUM1_PTR       0x16
-#define IXGBE_DEVICE_CAPS       0x2C
+#define IXGBE_FREE_SPACE_PTR    0X3E
 #define IXGBE_SAN_MAC_ADDR_PTR  0x28
+#define IXGBE_DEVICE_CAPS       0x2C
+#define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11
 #define IXGBE_PCIE_MSIX_82599_CAPS  0x72
 #define IXGBE_PCIE_MSIX_82598_CAPS  0x62
 
@@ -1630,9 +1696,12 @@
 #define IXGBE_FW_LESM_STATE_1            0x1
 #define IXGBE_FW_LESM_STATE_ENABLED      0x8000 /* LESM Enable bit */
 #define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR   0x4
-#define IXGBE_FW_PATCH_VERSION_4   0x7
-
-/* Alternative SAN MAC Address Block */
+#define IXGBE_FW_PATCH_VERSION_4         0x7
+#define IXGBE_FCOE_IBA_CAPS_BLK_PTR         0x33 /* iSCSI/FCOE block */
+#define IXGBE_FCOE_IBA_CAPS_FCOE            0x20 /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_BLK_PTR            0x17 /* iSCSI/FCOE block */
+#define IXGBE_ISCSI_FCOE_FLAGS_OFFSET       0x0  /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_FLAGS_ENABLE       0x1  /* FCOE flags enable bit */
 #define IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR      0x27 /* Alt. SAN MAC block */
 #define IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET  0x0 /* Alt. SAN MAC capability */
 #define IXGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET 0x1 /* Alt. SAN MAC 0 offset */
@@ -1697,6 +1766,7 @@
 /* Transmit Config masks */
 #define IXGBE_TXDCTL_ENABLE     0x02000000 /* Enable specific Tx Queue */
 #define IXGBE_TXDCTL_SWFLSH     0x04000000 /* Tx Desc. write-back flushing */
+#define IXGBE_TXDCTL_WTHRESH_SHIFT      16 /* shift to WTHRESH bits */
 /* Enable short packet padding to 64 bytes */
 #define IXGBE_TX_PAD_ENABLE     0x00000400
 #define IXGBE_JUMBO_FRAME_ENABLE 0x00000004  /* Allow jumbo frames */
@@ -1710,9 +1780,9 @@
 #define IXGBE_RXCTRL_RXEN       0x00000001  /* Enable Receiver */
 #define IXGBE_RXCTRL_DMBYPS     0x00000002  /* Descriptor Monitor Bypass */
 #define IXGBE_RXDCTL_ENABLE     0x02000000  /* Enable specific Rx Queue */
-#define IXGBE_RXDCTL_VME        0x40000000  /* VLAN mode enable */
 #define IXGBE_RXDCTL_RLPMLMASK  0x00003FFF  /* Only supported on the X540 */
 #define IXGBE_RXDCTL_RLPML_EN   0x00008000
+#define IXGBE_RXDCTL_VME        0x40000000  /* VLAN mode enable */
 
 #define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */
 #define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/
@@ -1870,6 +1940,8 @@
 #define IXGBE_RXDADV_PKTTYPE_MASK       0x0000FFF0
 #define IXGBE_RXDADV_PKTTYPE_MASK_EX    0x0001FFF0
 #define IXGBE_RXDADV_HDRBUFLEN_MASK     0x00007FE0
+#define IXGBE_RXDADV_RSCCNT_MASK        0x001E0000
+#define IXGBE_RXDADV_RSCCNT_SHIFT       17
 #define IXGBE_RXDADV_HDRBUFLEN_SHIFT    5
 #define IXGBE_RXDADV_SPLITHEADER_EN     0x00001000
 #define IXGBE_RXDADV_SPH                0x8000
@@ -1945,15 +2017,6 @@
 #define IXGBE_VFLRE(_i)                  (((_i & 1) ? 0x001C0 : 0x00600))
 #define IXGBE_VFLREC(_i)                 (0x00700 + (_i * 4))
 
-/* Little Endian defines */
-#ifndef __le32
-#define __le32  u32
-#endif
-#ifndef __le64
-#define __le64  u64
-
-#endif
-
 enum ixgbe_fdir_pballoc_type {
 	IXGBE_FDIR_PBALLOC_64K = 0,
 	IXGBE_FDIR_PBALLOC_128K,
@@ -2152,8 +2215,6 @@ typedef u32 ixgbe_link_speed;
                                         IXGBE_LINK_SPEED_1GB_FULL | \
                                         IXGBE_LINK_SPEED_10GB_FULL)
 
-#define IXGBE_PCIE_DEV_CTRL_2 0xC8
-#define PCIE_COMPL_TO_VALUE 0x05
 
 /* Physical layer type */
 typedef u32 ixgbe_physical_layer;
-- 
1.7.4.4

[net-next-2.6 04/12] ixgbe: add support for 64k EEPROM for 82599

[Jeff Kirsher]

From: Emil Tantilov <emil.s.tantilov@intel.com>

82599 supports up to 32k EEPROM addressing via EERD register. If we
wish to address larger EEPROM this have to be done via serial interface.
This patch adds function ixgbe_read_eeprom_82599 which selects the best
method to read the EEPROM.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_82599.c |   31 ++++++++++++++++++++++++++++++-
 1 files changed, 30 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index b341ed8..d521baf 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -2064,6 +2064,35 @@ out:
 	return lesm_enabled;
 }
 
+/**
+ *  ixgbe_read_eeprom_82599 - Read EEPROM word using
+ *  fastest available method
+ *
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM
+ **/
+static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+				   u16 offset, u16 *data)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	s32 ret_val = IXGBE_ERR_CONFIG;
+
+	/*
+	 * If EEPROM is detected and can be addressed using 14 bits,
+	 * use EERD otherwise use bit bang
+	 */
+	if ((eeprom->type == ixgbe_eeprom_spi) &&
+	    (offset <= IXGBE_EERD_MAX_ADDR))
+		ret_val = ixgbe_read_eerd_generic(hw, offset, data);
+	else
+		ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data);
+
+	return ret_val;
+}
+
 static struct ixgbe_mac_operations mac_ops_82599 = {
 	.init_hw                = &ixgbe_init_hw_generic,
 	.reset_hw               = &ixgbe_reset_hw_82599,
@@ -2110,7 +2139,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 
 static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
 	.init_params		= &ixgbe_init_eeprom_params_generic,
-	.read			= &ixgbe_read_eerd_generic,
+	.read			= &ixgbe_read_eeprom_82599,
 	.write			= &ixgbe_write_eeprom_generic,
 	.calc_checksum		= &ixgbe_calc_eeprom_checksum_generic,
 	.validate_checksum	= &ixgbe_validate_eeprom_checksum_generic,
-- 
1.7.4.4

[net-next-2.6 05/12] ixgbe: add LED blink code for x540

[Jeff Kirsher]

From: Emil Tantilov <emil.s.tantilov@intel.com>

Implement blink_led_start and blink_led_stop functions for x540
using the MACC register.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_x540.c |   64 ++++++++++++++++++++++++++++++++++++++-
 1 files changed, 62 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c
index 932394f..75c6465 100644
--- a/drivers/net/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ixgbe/ixgbe_x540.c
@@ -744,6 +744,66 @@ static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
 	IXGBE_WRITE_FLUSH(hw);
 }
 
+/**
+ * ixgbe_blink_led_start_X540 - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ *
+ * Devices that implement the version 2 interface:
+ *   X540
+ **/
+static s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
+{
+	u32 macc_reg;
+	u32 ledctl_reg;
+
+	/*
+	 * In order for the blink bit in the LED control register
+	 * to work, link and speed must be forced in the MAC. We
+	 * will reverse this when we stop the blinking.
+	 */
+	macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+	macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
+	IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+
+	/* Set the LED to LINK_UP + BLINK. */
+	ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+	ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+	ledctl_reg |= IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
+ *
+ * Devices that implement the version 2 interface:
+ *   X540
+ **/
+static s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
+{
+	u32 macc_reg;
+	u32 ledctl_reg;
+
+	/* Restore the LED to its default value. */
+	ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+	ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+	ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+	ledctl_reg &= ~IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+
+	/* Unforce link and speed in the MAC. */
+	macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+	macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS);
+	IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
 static struct ixgbe_mac_operations mac_ops_X540 = {
 	.init_hw                = &ixgbe_init_hw_generic,
 	.reset_hw               = &ixgbe_reset_hw_X540,
@@ -767,8 +827,8 @@ static struct ixgbe_mac_operations mac_ops_X540 = {
 	.get_link_capabilities  = &ixgbe_get_copper_link_capabilities_generic,
 	.led_on                 = &ixgbe_led_on_generic,
 	.led_off                = &ixgbe_led_off_generic,
-	.blink_led_start        = &ixgbe_blink_led_start_generic,
-	.blink_led_stop         = &ixgbe_blink_led_stop_generic,
+	.blink_led_start        = &ixgbe_blink_led_start_X540,
+	.blink_led_stop         = &ixgbe_blink_led_stop_X540,
 	.set_rar                = &ixgbe_set_rar_generic,
 	.clear_rar              = &ixgbe_clear_rar_generic,
 	.set_vmdq               = &ixgbe_set_vmdq_generic,
-- 
1.7.4.4

[net-next-2.6 06/12] ixgbe: remove ntuple display support

[Jeff Kirsher]

From: Alexander Duyck <alexander.h.duyck@intel.com>

This change removes the ntuple display support from ixgbe.  The reason for
this change is to resolve a number of issues in the way display filtering
is handled.

I plan to add support for displaying these filters via the network flow
classifier interface.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_ethtool.c |    3 ---
 drivers/net/ixgbe/ixgbe_main.c    |    3 ---
 2 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 5005a36..6cf1c71 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1030,9 +1030,6 @@ static int ixgbe_get_sset_count(struct net_device *netdev, int sset)
 		return IXGBE_TEST_LEN;
 	case ETH_SS_STATS:
 		return IXGBE_STATS_LEN;
-	case ETH_SS_NTUPLE_FILTERS:
-		return ETHTOOL_MAX_NTUPLE_LIST_ENTRY *
-		       ETHTOOL_MAX_NTUPLE_STRING_PER_ENTRY;
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 200ae7e..dbe29e5 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -4203,9 +4203,6 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 		break;
 	}
 
-	/* clear n-tuple filters that are cached */
-	ethtool_ntuple_flush(netdev);
-
 	if (!pci_channel_offline(adapter->pdev))
 		ixgbe_reset(adapter);
 
-- 
1.7.4.4

[net-next-2.6 07/12] ixgbe: fix static functions

[Jeff Kirsher]

From: John Fastabend <john.r.fastabend@intel.com>

Define functions as static added C=1 (sparse) to my make line
brought these to my attention.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_82599.c     |    2 +-
 drivers/net/ixgbe/ixgbe_dcb_82598.c |    2 +-
 drivers/net/ixgbe/ixgbe_main.c      |    4 ++--
 drivers/net/ixgbe/ixgbe_sriov.c     |    2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index d521baf..d1cda36 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -494,7 +494,7 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
  *
  *  Set the link speed in the AUTOC register and restarts link.
  **/
-s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
                                           ixgbe_link_speed speed,
                                           bool autoneg,
                                           bool autoneg_wait_to_complete)
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c
index 1bc57e5..771d01a 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c
@@ -289,7 +289,7 @@ s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en)
  * Configure queue statistics registers, all queues belonging to same traffic
  * class uses a single set of queue statistics counters.
  */
-s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
+static s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
 {
 	u32 reg = 0;
 	u8  i   = 0;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index dbe29e5..227a9b4 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -4566,8 +4566,8 @@ static inline bool ixgbe_cache_ring_rss(struct ixgbe_adapter *adapter)
 #ifdef CONFIG_IXGBE_DCB
 
 /* ixgbe_get_first_reg_idx - Return first register index associated with ring */
-void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc,
-			     unsigned int *tx, unsigned int *rx)
+static void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc,
+				    unsigned int *tx, unsigned int *rx)
 {
 	struct net_device *dev = adapter->netdev;
 	struct ixgbe_hw *hw = &adapter->hw;
diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ixgbe/ixgbe_sriov.c
index 6e50d83..4765027 100644
--- a/drivers/net/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ixgbe/ixgbe_sriov.c
@@ -110,7 +110,7 @@ static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
 	return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add);
 }
 
-void ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf)
+static void ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
 	int new_mtu = msgbuf[1];
-- 
1.7.4.4

[net-next-2.6 08/12] ixgbe: do not clear FCoE DDP error status for received ABTS

[Jeff Kirsher]

From: Yi Zou <yi.zou@intel.com>

The ddp->err is initialized to be 1 to make sure outstanding DDP context is
guaranteed to be invalidated when HW is not auto-invalidating it. However,
in case of receiving ABTS response for a DDPed I/O, the ddp->err was cleared,
bypassing the invalidating of the DDP context from upper protocol stack when
ixgbe_fcoe_ddp_put() is called. This bug is fixed here by updating the error
only when FCP_RSP is received.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_fcoe.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index dba7d77..0592072 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -416,8 +416,7 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
 	if (!ddp->udl)
 		goto ddp_out;
 
-	ddp->err = (fcerr | fceofe);
-	if (ddp->err)
+	if (fcerr | fceofe)
 		goto ddp_out;
 
 	fcstat = (sterr & IXGBE_RXDADV_STAT_FCSTAT);
@@ -428,6 +427,7 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
 		if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_FCPRSP) {
 			pci_unmap_sg(adapter->pdev, ddp->sgl,
 				     ddp->sgc, DMA_FROM_DEVICE);
+			ddp->err = (fcerr | fceofe);
 			ddp->sgl = NULL;
 			ddp->sgc = 0;
 		}
-- 
1.7.4.4

[net-next-2.6 09/12] ixgbe: enable SCTP checksum offload for X540

[Jeff Kirsher]

From: Don Skidmore <donald.c.skidmore@intel.com>

X540 supports SCTP checksum offload so enable it.  It was overlooked when X540
support was initially added to the driver.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_main.c |    8 +++++++-
 1 files changed, 7 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 227a9b4..a7da5d9 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -7361,8 +7361,14 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	netdev->features |= NETIF_F_TSO6;
 	netdev->features |= NETIF_F_GRO;
 
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		netdev->features |= NETIF_F_SCTP_CSUM;
+		break;
+	default:
+		break;
+	}
 
 	netdev->vlan_features |= NETIF_F_TSO;
 	netdev->vlan_features |= NETIF_F_TSO6;
-- 
1.7.4.4

[net-next-2.6 10/12] ixgbe: Bump version

[Jeff Kirsher]

From: Don Skidmore <donald.c.skidmore@intel.com>

Bump the driver version number to better match up with the out of tree
driver that has similar functionality.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_main.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index a7da5d9..9160811 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -52,8 +52,8 @@ char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
 			      "Intel(R) 10 Gigabit PCI Express Network Driver";
 #define MAJ 3
-#define MIN 2
-#define BUILD 9
+#define MIN 3
+#define BUILD 8
 #define KFIX 2
 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
 	__stringify(BUILD) "-k" __stringify(KFIX)
-- 
1.7.4.4

[net-next-2.6 11/12] ixgbe: fix X540 ethtool loopback test.

[Jeff Kirsher]

From: Don Skidmore <donald.c.skidmore@intel.com>

On X540 we need to set the MACC.FLU bit to 1 in order to force the link
up before entering MAC loopback.  This is only used in the ethtool loopback
test, which was failing.  This patch corrects it.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_ethtool.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 6cf1c71..bd7524e 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1595,6 +1595,13 @@ static int ixgbe_setup_loopback_test(struct ixgbe_adapter *adapter)
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 reg_data;
 
+	/* X540 needs to set the MACC.FLU bit to force link up */
+	if (adapter->hw.mac.type == ixgbe_mac_X540) {
+		reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_MACC);
+		reg_data |= IXGBE_MACC_FLU;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_MACC, reg_data);
+	}
+
 	/* right now we only support MAC loopback in the driver */
 	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
 	/* Setup MAC loopback */
-- 
1.7.4.4

[net-next-2.6 12/12] ixgbe: convert to ethtool set_phys_id

[Jeff Kirsher]

From: Emil Tantilov <emil.s.tantilov@intel.com>

Based on the original patch submitted by Stephen Hemminger.

This patch makes the following changes:
- Change ETHTOOL_ID_INACTIVE return value to 2 (blinks/sec)
- Fix restoring of IXGBE_LEDCTL

CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe.h         |    1 +
 drivers/net/ixgbe/ixgbe_ethtool.c |   29 +++++++++++++++++------------
 2 files changed, 18 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 8d46802..37ff531 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -461,6 +461,7 @@ struct ixgbe_adapter {
 	u16 eeprom_version;
 
 	int node;
+	u32 led_reg;
 	struct work_struct check_overtemp_task;
 	u32 interrupt_event;
 	char lsc_int_name[IFNAMSIZ + 9];
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index bd7524e..7279345 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -2003,25 +2003,30 @@ static int ixgbe_nway_reset(struct net_device *netdev)
 	return 0;
 }
 
-static int ixgbe_phys_id(struct net_device *netdev, u32 data)
+static int ixgbe_set_phys_id(struct net_device *netdev,
+			     enum ethtool_phys_id_state state)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
-	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-	u32 i;
 
-	if (!data || data > 300)
-		data = 300;
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		adapter->led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+		return 2;
 
-	for (i = 0; i < (data * 1000); i += 400) {
+	case ETHTOOL_ID_ON:
 		hw->mac.ops.led_on(hw, IXGBE_LED_ON);
-		msleep_interruptible(200);
+		break;
+
+	case ETHTOOL_ID_OFF:
 		hw->mac.ops.led_off(hw, IXGBE_LED_ON);
-		msleep_interruptible(200);
-	}
+		break;
 
-	/* Restore LED settings */
-	IXGBE_WRITE_REG(&adapter->hw, IXGBE_LEDCTL, led_reg);
+	case ETHTOOL_ID_INACTIVE:
+		/* Restore LED settings */
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_LEDCTL, adapter->led_reg);
+		break;
+	}
 
 	return 0;
 }
@@ -2469,7 +2474,7 @@ static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.set_tso                = ixgbe_set_tso,
 	.self_test              = ixgbe_diag_test,
 	.get_strings            = ixgbe_get_strings,
-	.phys_id                = ixgbe_phys_id,
+	.set_phys_id            = ixgbe_set_phys_id,
 	.get_sset_count         = ixgbe_get_sset_count,
 	.get_ethtool_stats      = ixgbe_get_ethtool_stats,
 	.get_coalesce           = ixgbe_get_coalesce,
-- 
1.7.4.4

Re: [net-next-2.6 00/12][pull request] Intel Wired LAN Driver Update

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Wed, 27 Apr 2011 02:34:39 -0700

> The following series contains updates to e1000e and ixgbe.
> 
> - e1000e: convert to new set_phys_id interface
> 
> - ixgbe: several cleanups and fixes, as well as the conversion
>   to the new set_phys_id interface and driver version bump.
> 
> The following are changes since commit 2bd93d7af1581d40e3c4b25242472661cb7c637a:
>   Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
> and are available in the git repository at:
>   master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6 master

Pulled, thanks Jeff.