netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Seth Forshee <seth.forshee@canonical.com>
To: Nick Kossifidis <mickflemm@gmail.com>,
	"John W. Linville" <linville@tuxdriver.com>
Cc: Jiri Slaby <jirislaby@gmail.com>,
	"Luis R. Rodriguez" <lrodriguez@atheros.com>,
	Bob Copeland <me@bobcopeland.com>,
	linux-wireless@vger.kernel.org, ath5k-devel@venema.h4ckr.net,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: ath5k regression associating with APs in 2.6.38
Date: Thu, 5 May 2011 08:52:07 -0500	[thread overview]
Message-ID: <20110505135207.GA13727@thinkpad-t410> (raw)
In-Reply-To: <BANLkTimEmBRyxbZgffJMrH4TTc4f6peuTg@mail.gmail.com>

On Wed, May 04, 2011 at 11:09:03PM +0300, Nick Kossifidis wrote:
> 2011/5/4 Seth Forshee <seth.forshee@canonical.com>:
> > On Wed, May 04, 2011 at 01:27:17PM -0400, John W. Linville wrote:
> >> On Wed, May 04, 2011 at 10:38:19AM -0500, Seth Forshee wrote:
> >> > I've been investigating some reports of a regression in associating with
> >> > APs with AR2413 in 2.6.38. Association repeatedly fails with some
> >> > "direct probe to x timed out" messages (see syslog excerpt below),
> >> > although it will generally associate eventually, after many tries.
> >> >
> >> > Bisection identifies 8aec7af (ath5k: Support synth-only channel change
> >> > for AR2413/AR5413) as offending commit. Prior to this commit there are
> >> > no direct probe messages at all in the logs. I've also found that
> >> > forcing fast to false at the top of ath5k_hw_reset() fixes the issue.
> >> > I'm not sure what the connection is between this commit and the
> >> > timeouts. Any suggestions?
> >>
> >> Have you tried reverting that commit on top of 2.6.38?  Can you
> >> recreate the issue with 2.6.39-rc6 (or later)?
> >
> > I started to revert that commit, but it wasn't straight-forward due to
> > later changes. Forcing fast to false in ath5k_hw_reset() acts as a
> > functional revert of sorts since that should force it back to a full
> > reset for all channel changes, and it's much simpler than working out
> > the right way to revert the commit. I think the results suggest strongly
> > that a revert is likely to fix the problem. I can finish the work to
> > revert if you'd still like to see the results.
> >
> > Testing a previous .39-rc kernel still exhibited the failure. I don't
> > recall which one it was and apparently forgot to make note of it. I'll
> > request testing against rc6.
> >
> > Thanks,
> > Seth
> >
> 
> Do you get scan results ?
> Can you enable ATH5K_DEBUG_RESET and see what you get ?

2.6.39-rc6 still fails. A more comprehensive log with ATH5K_DEBUG_RESET
enabled is below.

Scanning looks to be failing according to this log. I was thinking that
I saw successfull scans in some of the previous logs, but I'll have to
go back and check to be sure.

Thanks,
Seth


kernel: [   23.421242] ath5k 0000:06:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
kernel: [   23.421312] ath5k 0000:06:02.0: registered as 'phy0'
kernel: [   24.132959] ath: EEPROM regdomain: 0x63
kernel: [   24.132962] ath: EEPROM indicates we should expect a direct regpair map
kernel: [   24.132967] ath: Country alpha2 being used: 00
kernel: [   24.132969] ath: Regpair used: 0x63
kernel: [   24.136125] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
kernel: [   24.136131] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
kernel: [   24.136134] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
kernel: [   24.136137] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
kernel: [   24.136140] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
kernel: [   24.136143] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
kernel: [   24.136146] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
kernel: [   24.136149] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
kernel: [   24.136151] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
kernel: [   24.136155] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
kernel: [   24.136157] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
kernel: [   24.136160] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
kernel: [   24.136163] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
kernel: [   24.136166] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
kernel: [   24.136168] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
kernel: [   24.136172] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
kernel: [   24.136174] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
kernel: [   24.136177] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
kernel: [   24.136180] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
kernel: [   24.136183] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
kernel: [   24.136186] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
kernel: [   24.136189] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
kernel: [   24.136191] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
kernel: [   24.136195] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
kernel: [   24.136197] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
kernel: [   24.136200] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
kernel: [   24.136203] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
kernel: [   24.136404] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
kernel: [   24.393924] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
kernel: [   24.394588] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
...
NetworkManager[725]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
NetworkManager[725]: <info> (wlan0): new 802.11 WiFi device (driver: 'ath5k' ifindex: 3)
NetworkManager[725]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
NetworkManager[725]: <info> (wlan0): now managed
NetworkManager[725]: <info> (wlan0): device state change: 1 -> 2 (reason 2)
NetworkManager[725]: <info> (wlan0): bringing up device.
NetworkManager[725]: <info> (wlan0): preparing device.
NetworkManager[725]: <info> (wlan0): deactivating device (reason: 2).
NetworkManager[725]: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed
kernel: [   25.149294] ADDRCONF(NETDEV_UP): wlan0: link is not ready
...
NetworkManager[725]: <info> Trying to start the supplicant...
...
NetworkManager[725]: <info> (wlan0): supplicant manager state:  down -> idle
NetworkManager[725]: <info> (wlan0): device state change: 2 -> 3 (reason 0)
NetworkManager[725]: <info> (wlan0): supplicant interface state:  starting -> ready
...
NetworkManager[725]: <info> (wlan0): device state change: 3 -> 2 (reason 0)
NetworkManager[725]: <info> (wlan0): deactivating device (reason: 0).
NetworkManager[725]: <info> (wlan0): taking down device.
NetworkManager[725]: <info> (wlan0): bringing up device.
kernel: [  104.430292] ath5k phy0: (ath5k_init_hw:2522): mode 2
kernel: [  104.430297] ath5k phy0: (ath5k_stop_locked:2481): invalid 0
kernel: [  104.431000] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  104.434475] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  104.434683] ath5k phy0: (ath5k_rfkill_disable:42): rfkill disable (gpio:0 polarity:0)
kernel: [  104.435759] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2412 -> 2412 MHz)
kernel: [  104.435762] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  104.436845] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  104.437191] ath5k phy0: (ath5k_conf_tx:602): Configure tx [queue 0],  aifs: 2, cw_min: 7, cw_max: 15, txop: 102
kernel: [  104.437212] ath5k phy0: (ath5k_conf_tx:602): Configure tx [queue 1],  aifs: 2, cw_min: 15, cw_max: 31, txop: 188
kernel: [  104.438337] ADDRCONF(NETDEV_UP): wlan0: link is not ready
NetworkManager[725]: <info> (wlan0): supplicant interface state:  starting -> ready
NetworkManager[725]: <info> (wlan0): device state change: 2 -> 3 (reason 42)
wpa_supplicant[745]: Failed to initiate AP scan.
kernel: [  125.188087] net_ratelimit: 41 callbacks suppressed
kernel: [  125.188100] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2412 -> 2417 MHz)
kernel: [  125.188109] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  125.291007] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  125.344076] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2417 -> 2422 MHz)
kernel: [  125.344090] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  125.447014] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  125.500078] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2422 -> 2427 MHz)
kernel: [  125.500091] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  125.602999] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  125.656070] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2427 -> 2432 MHz)
kernel: [  155.188052] net_ratelimit: 29 callbacks suppressed
kernel: [  155.188058] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2412 -> 2417 MHz)
kernel: [  155.188061] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  155.290844] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  155.344032] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2417 -> 2422 MHz)
kernel: [  155.344038] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  155.446810] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  155.500031] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2422 -> 2427 MHz)
kernel: [  155.500036] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  155.602811] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  155.656033] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2427 -> 2432 MHz)
kernel: [  195.184088] net_ratelimit: 29 callbacks suppressed
kernel: [  195.184102] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2412 -> 2417 MHz)
kernel: [  195.184110] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  195.287022] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  195.340066] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2417 -> 2422 MHz)
kernel: [  195.340079] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  195.442967] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  195.496076] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2422 -> 2427 MHz)
kernel: [  195.496088] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  195.599009] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  195.652078] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2427 -> 2432 MHz)
kernel: [  245.188077] net_ratelimit: 29 callbacks suppressed
kernel: [  245.188091] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2412 -> 2417 MHz)
kernel: [  245.188100] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  245.290997] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  245.344084] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2417 -> 2422 MHz)
kernel: [  245.344092] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  245.446882] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  245.500053] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2422 -> 2427 MHz)
kernel: [  245.500058] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  245.602808] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  245.656046] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2427 -> 2432 MHz)
kernel: [  305.188050] net_ratelimit: 29 callbacks suppressed
kernel: [  305.188063] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2412 -> 2417 MHz)
kernel: [  305.188071] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  305.290945] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  305.344070] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2417 -> 2422 MHz)
kernel: [  305.344082] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  305.446943] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  305.500047] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2422 -> 2427 MHz)
kernel: [  305.500058] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  305.602967] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  305.656090] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2427 -> 2432 MHz)
NetworkManager[725]: <info> (wlan0): device state change: 3 -> 2 (reason 0)
NetworkManager[725]: <info> (wlan0): deactivating device (reason: 0).
NetworkManager[725]: <info> (wlan0): taking down device.
kernel: [  310.887530] net_ratelimit: 29 callbacks suppressed
kernel: [  310.887535] ath5k phy0: (ath5k_stop_locked:2481): invalid 0
kernel: [  310.990264] ath5k phy0: (ath5k_stop_hw:2619): putting device to sleep
kernel: [  310.990554] ath5k phy0: (ath5k_rfkill_enable:51): rfkill enable (gpio:0 polarity:0)
NetworkManager[725]: <info> (wlan0): bringing up device.
kernel: [  315.755891] ath5k phy0: (ath5k_init_hw:2522): mode 2
kernel: [  315.755903] ath5k phy0: (ath5k_stop_locked:2481): invalid 0
kernel: [  315.756624] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  315.760236] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  315.760474] ath5k phy0: (ath5k_rfkill_disable:42): rfkill disable (gpio:0 polarity:0)
kernel: [  315.762566] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2412 -> 2412 MHz)
kernel: [  315.762574] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  315.764972] ADDRCONF(NETDEV_UP): wlan0: link is not ready
NetworkManager[725]: <info> (wlan0): supplicant interface state:  starting -> ready
NetworkManager[725]: <info> (wlan0): device state change: 2 -> 3 (reason 42)
wpa_supplicant[745]: Failed to initiate AP scan.
kernel: [  316.036068] net_ratelimit: 8 callbacks suppressed
kernel: [  316.036080] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2417 -> 2422 MHz)
kernel: [  316.036089] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  316.140039] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  316.196067] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2422 -> 2427 MHz)
kernel: [  316.196079] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  316.298940] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  316.352063] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2427 -> 2432 MHz)
kernel: [  316.352071] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  316.455003] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  316.508080] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2432 -> 2437 MHz)
kernel: [  336.188067] net_ratelimit: 26 callbacks suppressed
kernel: [  336.188080] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2412 -> 2417 MHz)
kernel: [  336.188088] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  336.290966] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  336.344059] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2417 -> 2422 MHz)
kernel: [  336.344068] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  336.446912] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  336.500068] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2422 -> 2427 MHz)
kernel: [  336.500077] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  336.602937] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  336.656058] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2427 -> 2432 MHz)
kernel: [  366.188084] net_ratelimit: 29 callbacks suppressed
kernel: [  366.188097] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2412 -> 2417 MHz)
kernel: [  366.188105] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  366.290999] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  366.344099] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2417 -> 2422 MHz)
kernel: [  366.344112] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  366.447030] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  366.500094] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2422 -> 2427 MHz)
kernel: [  366.500106] ath5k phy0: (ath5k_reset:2648): resetting
kernel: [  366.603008] ath5k phy0: (ath5k_rx_start:1099): cachelsz 32 rx_bufsize 2368
kernel: [  366.656103] ath5k phy0: (ath5k_chan_set:434): channel set, resetting (2427 -> 2432 MHz)

  parent reply	other threads:[~2011-05-05 13:52 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-04 15:38 ath5k regression associating with APs in 2.6.38 Seth Forshee
2011-05-04 17:27 ` John W. Linville
     [not found] ` <20110504172716.GC18541@tuxdriver.com>
2011-05-04 19:26   ` Seth Forshee
2011-05-04 20:09     ` Nick Kossifidis
     [not found]     ` <BANLkTimEmBRyxbZgffJMrH4TTc4f6peuTg@mail.gmail.com>
2011-05-05 13:52       ` Seth Forshee [this message]
2011-05-05 14:30         ` Nick Kossifidis
     [not found]         ` <BANLkTinkiTQU2k7vBEc0JPGa01AUVCvp2Q@mail.gmail.com>
2011-05-05 14:54           ` Seth Forshee
2011-05-05 15:01           ` Justin P. Mattock
2011-05-05 15:15             ` Nick Kossifidis
2011-05-09  7:02           ` Seth Forshee
2011-05-17 16:57             ` Seth Forshee
2011-05-17 17:14               ` Nick Kossifidis
     [not found]               ` <BANLkTi=8ZRUVWn3FLAMtPh=4yY1F0k6i9w@mail.gmail.com>
2011-05-17 18:50                 ` Seth Forshee
2011-05-19 21:28                   ` Seth Forshee
2011-05-31 17:31                 ` [ath5k-devel] " Felix Fietkau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110505135207.GA13727@thinkpad-t410 \
    --to=seth.forshee@canonical.com \
    --cc=ath5k-devel@venema.h4ckr.net \
    --cc=jirislaby@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=lrodriguez@atheros.com \
    --cc=me@bobcopeland.com \
    --cc=mickflemm@gmail.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).