From: Stephen Hemminger <shemminger@linux-foundation.org>
To: ebiederm@xmission.com (Eric W. Biederman)
Cc: David Miller <davem@davemloft.net>,
greearb@candelatech.com, nicolas.2p.debian@gmail.com,
jpirko@redhat.com, xiaosuo@gmail.com, netdev@vger.kernel.org,
kaber@trash.net, fubar@us.ibm.com, eric.dumazet@gmail.com,
andy@greyhouse.net, jesse@nicira.com
Subject: Re: [PATCH 1/3] vlan: Do not support clearing VLAN_FLAG_REORDER_HDR
Date: Mon, 23 May 2011 15:16:31 -0700 [thread overview]
Message-ID: <20110523151631.2c34740f@nehalam> (raw)
In-Reply-To: <m1y61x2htp.fsf@fess.ebiederm.org>
On Mon, 23 May 2011 15:05:54 -0700
ebiederm@xmission.com (Eric W. Biederman) wrote:
> David Miller <davem@davemloft.net> writes:
>
> > From: Stephen Hemminger <shemminger@linux-foundation.org>
> > Date: Mon, 23 May 2011 14:00:48 -0700
> >
> >> IMHO the REORDER_HDR flag was a design mistake. It means supporting
> >> two different API's for the application. For a packet capture application
> >> it means the format of the packet will be different based on how
> >> the VLAN was created. And the vlan was created outside the application.
> >>
> >> If there was a requirement to support both formats, then it should
> >> be a property of the AF_PACKET socket. The application can then do
> >> an setsockopt() to control the format of the data. The issue is
> >> for things like mmap/AF_PACKET the re-inserted form will be slower
> >> since data has to be copied.
> >
> > Indeed, it was a foolish thing to support in the first place.
> >
> > I guess we couldn't see the hw offloads in the future at that
> > point.
> >
> > I'm all for finding a way to deprecate this over time.
>
>
> There are two very similar issues here, that affect two
> slightly different cases.
>
> Let's assume the configuration is:
> eth0 - Talks to the outside world.
> vlan2000 - Is the vlan interface of interest.
>
>
> With REORDER_HDR set when I tcpdump on vlan2000 I don't see the
> vlan header, however I continue to see the vlan header when I tcpdump on eth0.
>
> With vlan hardware acceleration. When I tcpdump on eth0 I don't
> see the vlan header. Nor do I see the vlan header when I tcpdump
> on vlan2000.
>
>
> Right now both cases are problematic in Linus's tree.
>
> For inbound packets We are testing the wrong interface for the to see if
> we should play with REORDER_HDR.
>
> Hardware acceleration vlan tagging we are hiding the vlan header from
> portable applications that simply dump eth0. Which is non-intuitive
> and apparent to everyone now that this happens on both software and
> hardware interfaces.
>
>
> So we have a couple of questions.
> 1) Do we revert the software emulation of vlan header tagging to fix
> it's implementation issues in 2.6.40?
>
> The big issues.
> - vlan_untag is currently reading undefined data.
> - Clearing REORDER_HDR no longer works.
>
> I expect the issues are small enough that we can address them now.
>
> 2) Do we instead move the software implementation of vlan header
> acceleration back into the net-next.
>
> 3) What do we do with pf_packet and vlan hardware acceleration when
> dumping not the vlan interface but the interface below the vlan
> interface?
>
> Do we provide an option to keep the vlan header? Should that option
> be on by default?
Why not just make libpcap smarter? it already has Linux specific
stuff for checksum offload. The portability to BSD for AF_PACKET is
a non-issue.
--
next prev parent reply other threads:[~2011-05-23 22:17 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-08 5:48 [patch net-next-2.6 v2] net: vlan: make non-hw-accel rx path similar to hw-accel Jiri Pirko
2011-04-12 21:16 ` David Miller
2011-05-21 1:11 ` Changli Gao
2011-05-21 7:29 ` Jiri Pirko
2011-05-21 10:43 ` Changli Gao
2011-05-21 13:17 ` Nicolas de Pesloüan
2011-05-21 17:54 ` Jesse Gross
2011-05-21 22:15 ` Stephen Hemminger
2011-05-22 2:59 ` Nicolas de Pesloüan
2011-05-22 6:29 ` Jiri Pirko
2011-05-22 6:34 ` Eric W. Biederman
2011-05-22 8:34 ` Nicolas de Pesloüan
2011-05-22 8:52 ` Michał Mirosław
2011-05-22 9:10 ` Nicolas de Pesloüan
2011-05-22 9:20 ` Michał Mirosław
2011-05-22 9:36 ` Jiri Pirko
2011-05-22 9:53 ` Nicolas de Pesloüan
2011-05-22 10:04 ` Michał Mirosław
2011-05-22 16:11 ` Jesse Gross
2011-05-22 18:24 ` Eric W. Biederman
2011-05-22 19:33 ` Eric W. Biederman
2011-05-22 19:39 ` [PATCH 1/3] vlan: Do not support clearing VLAN_FLAG_REORDER_HDR Eric W. Biederman
2011-05-22 19:40 ` [PATCH 2/3] vlan: Always strip the vlan header in vlan_untag Eric W. Biederman
2011-05-22 19:42 ` [PATCH 3/3] vlan: Simplify the code now that VLAN_FLAG_REORDER_HDR is always set Eric W. Biederman
2011-06-09 10:59 ` Jiri Pirko
2011-06-12 6:17 ` Eric W. Biederman
2011-05-22 21:04 ` [PATCH 1/3] vlan: Do not support clearing VLAN_FLAG_REORDER_HDR Ben Greear
2011-05-22 22:38 ` Eric W. Biederman
2011-05-23 0:38 ` Changli Gao
2011-05-23 1:26 ` Changli Gao
2011-05-23 1:45 ` Eric W. Biederman
2011-05-23 2:14 ` Changli Gao
2011-05-23 9:41 ` Eric W. Biederman
2011-05-23 10:43 ` Jiri Pirko
2011-05-23 19:48 ` Nicolas de Pesloüan
2011-05-24 5:58 ` Jiri Pirko
2011-05-24 7:19 ` Nicolas de Pesloüan
2011-05-23 1:39 ` Eric W. Biederman
2011-05-23 6:01 ` Ben Greear
2011-05-23 9:00 ` Eric W. Biederman
2011-05-23 16:33 ` Ben Greear
2011-05-23 19:36 ` Nicolas de Pesloüan
2011-05-23 20:24 ` Ben Greear
2011-05-23 21:00 ` Stephen Hemminger
2011-05-23 21:20 ` David Miller
2011-05-23 22:05 ` Eric W. Biederman
2011-05-23 22:16 ` Stephen Hemminger [this message]
2011-05-23 22:48 ` Eric W. Biederman
2011-05-23 22:23 ` Ben Greear
2011-05-23 23:02 ` Eric W. Biederman
2011-05-24 4:20 ` Ben Greear
2011-05-24 7:11 ` Nicolas de Pesloüan
2011-05-24 7:44 ` Michał Mirosław
2011-05-24 15:17 ` Ben Greear
2011-05-24 5:19 ` David Miller
2011-05-24 7:56 ` Eric W. Biederman
2011-05-24 15:44 ` Ben Greear
2011-05-24 0:11 ` [PATCH] vlan: Fix the b0rked ingress VLAN_FLAG_REORDER_HDR check Eric W. Biederman
2011-05-24 4:54 ` David Miller
2011-05-24 6:18 ` Eric W. Biederman
2011-05-24 6:24 ` David Miller
2011-05-24 7:38 ` Eric W. Biederman
2011-06-02 3:59 ` David Miller
2011-06-02 13:03 ` [PATCH] vlan: Fix the ingress VLAN_FLAG_REORDER_HDR check v2 Eric W. Biederman
2011-06-02 13:15 ` Jiri Pirko
2011-06-02 14:54 ` Changli Gao
2011-06-02 15:26 ` Eric W. Biederman
2011-06-02 23:18 ` Changli Gao
2011-06-06 14:48 ` Jiri Pirko
2011-06-03 3:34 ` padmanabh ratnakar
2011-06-03 3:59 ` Changli Gao
2011-06-05 21:14 ` David Miller
2011-06-10 8:35 ` [PATCH v3] vlan: Fix the ingress VLAN_FLAG_REORDER_HDR check Jiri Pirko
2011-06-10 9:26 ` Changli Gao
2011-06-10 9:34 ` Jiri Pirko
2011-06-10 9:49 ` Changli Gao
2011-06-10 10:35 ` Jiri Pirko
2011-06-10 11:20 ` Changli Gao
2011-06-10 12:12 ` Jiri Pirko
2011-06-10 16:56 ` Jiri Pirko
2011-06-11 0:05 ` Changli Gao
2011-06-11 23:16 ` David Miller
2011-06-08 16:28 ` [PATCH] vlan: Fix the ingress VLAN_FLAG_REORDER_HDR check v2 Jiri Pirko
2011-06-08 23:08 ` Changli Gao
2011-06-09 6:01 ` Jiri Pirko
2011-06-09 11:00 ` [PATCH 1/3] vlan: Do not support clearing VLAN_FLAG_REORDER_HDR Jiri Pirko
2011-05-22 8:38 ` [patch net-next-2.6 v2] net: vlan: make non-hw-accel rx path similar to hw-accel Changli Gao
2011-05-22 9:37 ` Jiri Pirko
2011-05-22 10:17 ` Changli Gao
2011-05-22 10:26 ` Eric W. Biederman
2011-05-22 10:40 ` Changli Gao
2011-05-22 13:16 ` Jiri Pirko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110523151631.2c34740f@nehalam \
--to=shemminger@linux-foundation.org \
--cc=andy@greyhouse.net \
--cc=davem@davemloft.net \
--cc=ebiederm@xmission.com \
--cc=eric.dumazet@gmail.com \
--cc=fubar@us.ibm.com \
--cc=greearb@candelatech.com \
--cc=jesse@nicira.com \
--cc=jpirko@redhat.com \
--cc=kaber@trash.net \
--cc=netdev@vger.kernel.org \
--cc=nicolas.2p.debian@gmail.com \
--cc=xiaosuo@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).