From: "Vlad Zolotarov" <vladz@broadcom.com>
To: "Dave Miller" <davem@davemloft.net>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"Dmitry Kravkov" <dmitry@broadcom.com>,
"Eilon Greenstein" <eilong@broadcom.com>,
"Yaniv Rosner" <yaniv.rosner@broadcom.com>
Subject: [PATCH net-next 22/24] bnx2x: Rename LASI registers to definitions in mdio.h
Date: Tue, 14 Jun 2011 14:34:38 +0300 [thread overview]
Message-ID: <201106141434.38901.vladz@broadcom.com> (raw)
From: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/bnx2x/bnx2x_link.c | 82 ++++++++++++++++++++--------------------
drivers/net/bnx2x/bnx2x_reg.h | 6 ---
2 files changed, 41 insertions(+), 47 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index e802c2a..6c8ee64 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -6821,9 +6821,9 @@ static int bnx2x_8073_config_init(struct bnx2x_phy *phy,
/* enable LASI */
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL, (1<<2));
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, (1<<2));
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0x0004);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x0004);
bnx2x_8073_set_pause_cl37(params, phy, vars);
@@ -6831,7 +6831,7 @@ static int bnx2x_8073_config_init(struct bnx2x_phy *phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1);
bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &tmp1);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1);
DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1);
@@ -6965,7 +6965,7 @@ static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy,
u16 an1000_status = 0;
bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
DP(NETIF_MSG_LINK, "8703 LASI status 0x%x\n", val1);
@@ -6981,7 +6981,7 @@ static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy,
/* Check the LASI */
bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &val2);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2);
DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2);
@@ -8109,16 +8109,16 @@ static u8 bnx2x_8706_8726_read_status(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "XGXS 8706/8726\n");
/* Clear RX Alarm*/
bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &val2);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2);
- bnx2x_sfp_mask_fault(bp, phy, MDIO_PMA_REG_TX_ALARM,
- MDIO_PMA_REG_TX_ALARM_CTRL);
+ bnx2x_sfp_mask_fault(bp, phy, MDIO_PMA_LASI_TXSTAT,
+ MDIO_PMA_LASI_TXCTRL);
/* clear LASI indication*/
bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val2);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2);
DP(NETIF_MSG_LINK, "8706/8726 LASI status 0x%x--> 0x%x\n", val1, val2);
bnx2x_cl45_read(bp, phy,
@@ -8149,9 +8149,9 @@ static u8 bnx2x_8706_8726_read_status(struct bnx2x_phy *phy,
/* Capture 10G link fault. Read twice to clear stale value. */
if (vars->line_speed == SPEED_10000) {
bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD,
- MDIO_PMA_REG_TX_ALARM, &val1);
+ MDIO_PMA_LASI_TXSTAT, &val1);
bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD,
- MDIO_PMA_REG_TX_ALARM, &val1);
+ MDIO_PMA_LASI_TXSTAT, &val1);
if (val1 & (1<<0))
vars->fault_detected = 1;
}
@@ -8215,11 +8215,11 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_DIGITAL_CTRL, 0x400);
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_TX_ALARM_CTRL,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL,
0);
/* Arm LASI for link and Tx fault. */
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 3);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 3);
} else {
/* Force 1Gbps using autoneg with 1G advertisement */
@@ -8242,10 +8242,10 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200);
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
0x0400);
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL,
0x0004);
}
bnx2x_save_bcm_spirom_ver(bp, phy, params->port);
@@ -8379,9 +8379,9 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0xD);
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0x5);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x5);
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
0x400);
} else if ((phy->req_line_speed == SPEED_AUTO_NEG) &&
(phy->speed_cap_mask &
@@ -8407,14 +8407,14 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
* change
*/
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0x4);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x4);
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
0x400);
} else { /* Default 10G. Set only LASI control */
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 1);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 1);
}
/* Set TX PreEmphasis if needed */
@@ -8538,13 +8538,13 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "Initializing BCM8727\n");
/* enable LASI */
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
rx_alarm_ctrl_val);
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_TX_ALARM_CTRL,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL,
0);
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, lasi_ctrl_val);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, lasi_ctrl_val);
/*
* Initially configure MOD_ABS to interrupt when module is
@@ -8586,7 +8586,7 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1);
bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &tmp1);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1);
/* Set option 1G speed */
if (phy->req_line_speed == SPEED_1000) {
@@ -8726,7 +8726,7 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
*/
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_RX_ALARM, &rx_alarm_status);
+ MDIO_PMA_LASI_RXSTAT, &rx_alarm_status);
} else {
/* Module is present */
@@ -8755,7 +8755,7 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
*/
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_RX_ALARM, &rx_alarm_status);
+ MDIO_PMA_LASI_RXSTAT, &rx_alarm_status);
if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
@@ -8785,23 +8785,23 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
/* If PHY is not initialized, do not check link status */
bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL,
&lasi_ctrl);
if (!lasi_ctrl)
return 0;
/* Check the LASI on Rx */
bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT,
&rx_alarm_status);
vars->line_speed = 0;
DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n", rx_alarm_status);
- bnx2x_sfp_mask_fault(bp, phy, MDIO_PMA_REG_TX_ALARM,
- MDIO_PMA_REG_TX_ALARM_CTRL);
+ bnx2x_sfp_mask_fault(bp, phy, MDIO_PMA_LASI_TXSTAT,
+ MDIO_PMA_LASI_TXCTRL);
bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
DP(NETIF_MSG_LINK, "8727 LASI status 0x%x\n", val1);
@@ -8835,7 +8835,7 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
/* Disable all RX_ALARMs except for mod_abs */
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_RX_ALARM_CTRL, (1<<5));
+ MDIO_PMA_LASI_RXCTRL, (1<<5));
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD,
@@ -8848,7 +8848,7 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
/* Clear RX alarm */
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_RX_ALARM, &rx_alarm_status);
+ MDIO_PMA_LASI_RXSTAT, &rx_alarm_status);
return 0;
}
} /* Over current check */
@@ -8858,7 +8858,7 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
bnx2x_8727_handle_mod_abs(phy, params);
/* Enable all mod_abs and link detection bits */
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL,
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
((1<<5) | (1<<2)));
}
DP(NETIF_MSG_LINK, "Enabling 8727 TX laser if SFP is approved\n");
@@ -8898,10 +8898,10 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
/* Capture 10G link fault. */
if (vars->line_speed == SPEED_10000) {
bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD,
- MDIO_PMA_REG_TX_ALARM, &val1);
+ MDIO_PMA_LASI_TXSTAT, &val1);
bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD,
- MDIO_PMA_REG_TX_ALARM, &val1);
+ MDIO_PMA_LASI_TXSTAT, &val1);
if (val1 & (1<<0)) {
vars->fault_detected = 1;
@@ -8941,7 +8941,7 @@ static void bnx2x_8727_link_reset(struct bnx2x_phy *phy,
/* Disable Transmitter */
bnx2x_sfp_set_transmitter(params, phy, 0);
/* Clear LASI */
- bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0);
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0);
}
@@ -10137,7 +10137,7 @@ static int bnx2x_7101_config_init(struct bnx2x_phy *phy,
bnx2x_wait_reset_complete(bp, phy, params);
bnx2x_cl45_write(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0x1);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x1);
DP(NETIF_MSG_LINK, "Setting the SFX7101 LED to blink on traffic\n");
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LED_CNTL, (1<<3));
@@ -10169,9 +10169,9 @@ static u8 bnx2x_7101_read_status(struct bnx2x_phy *phy,
u8 link_up;
u16 val1, val2;
bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val2);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2);
bnx2x_cl45_read(bp, phy,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1);
+ MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
DP(NETIF_MSG_LINK, "10G-base-T LASI status 0x%x->0x%x\n",
val2, val1);
bnx2x_cl45_read(bp, phy,
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 2511f99..53da4ef 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -6610,12 +6610,6 @@ Theotherbitsarereservedandshouldbezero*/
/*bcm*/
#define MDIO_PMA_REG_BCM_CTRL 0x0096
#define MDIO_PMA_REG_FEC_CTRL 0x00ab
-#define MDIO_PMA_REG_RX_ALARM_CTRL 0x9000
-#define MDIO_PMA_REG_TX_ALARM_CTRL 0x9001
-#define MDIO_PMA_REG_LASI_CTRL 0x9002
-#define MDIO_PMA_REG_RX_ALARM 0x9003
-#define MDIO_PMA_REG_TX_ALARM 0x9004
-#define MDIO_PMA_REG_LASI_STATUS 0x9005
#define MDIO_PMA_REG_PHY_IDENTIFIER 0xc800
#define MDIO_PMA_REG_DIGITAL_CTRL 0xc808
#define MDIO_PMA_REG_DIGITAL_STATUS 0xc809
--
1.7.1
reply other threads:[~2011-06-14 11:35 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201106141434.38901.vladz@broadcom.com \
--to=vladz@broadcom.com \
--cc=davem@davemloft.net \
--cc=dmitry@broadcom.com \
--cc=eilong@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=yaniv.rosner@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).