From: Kurt Van Dijck <kurt.van.dijck-/BeEPy95v10@public.gmane.org>
To: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org
Subject: [PATCH] can: remove useless defaults in Kconfig
Date: Mon, 27 Jun 2011 17:00:13 +0200 [thread overview]
Message-ID: <20110627150013.GB1874@e-circ.dyndns.org> (raw)
There's no need for "default N' (or 'default n') as it's default.
Signed-off-by: Kurt Van Dijck <kurt.van.dijck-/BeEPy95v10@public.gmane.org>
Acked-by: Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 1d699e3..ac48574 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -4,7 +4,6 @@ menu "CAN Device Drivers"
config CAN_VCAN
tristate "Virtual Local CAN Interface (vcan)"
depends on CAN
- default N
---help---
Similar to the network loopback devices, vcan offers a
virtual local CAN interface.
@@ -15,7 +14,6 @@ config CAN_VCAN
config CAN_SLCAN
tristate "Serial / USB serial CAN Adaptors (slcan)"
depends on CAN
- default N
---help---
CAN driver for several 'low cost' CAN interfaces that are attached
via serial lines or via USB-to-serial adapters using the LAWICEL
@@ -124,7 +122,6 @@ source "drivers/net/can/softing/Kconfig"
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
depends on CAN
- default N
---help---
Say Y here if you want the CAN device drivers to produce a bunch of
debug messages to the system log. Select this if you are having
next reply other threads:[~2011-06-27 15:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-27 15:00 Kurt Van Dijck [this message]
[not found] ` <20110627150013.GB1874-MxZ6Iy/zr/UdbCeoMzGj59i2O/JbrIOy@public.gmane.org>
2011-07-01 6:54 ` [PATCH] can: remove useless defaults in Kconfig David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110627150013.GB1874@e-circ.dyndns.org \
--to=kurt.van.dijck-/beepy95v10@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).