From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kurt Van Dijck Subject: [PATCH] can: remove useless defaults in Kconfig Date: Mon, 27 Jun 2011 17:00:13 +0200 Message-ID: <20110627150013.GB1874@e-circ.dyndns.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org Return-path: Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: socketcan-core-bounces-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org Errors-To: socketcan-core-bounces-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org List-Id: netdev.vger.kernel.org There's no need for "default N' (or 'default n') as it's default. Signed-off-by: Kurt Van Dijck Acked-by: Marc Kleine-Budde --- diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 1d699e3..ac48574 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -4,7 +4,6 @@ menu "CAN Device Drivers" config CAN_VCAN tristate "Virtual Local CAN Interface (vcan)" depends on CAN - default N ---help--- Similar to the network loopback devices, vcan offers a virtual local CAN interface. @@ -15,7 +14,6 @@ config CAN_VCAN config CAN_SLCAN tristate "Serial / USB serial CAN Adaptors (slcan)" depends on CAN - default N ---help--- CAN driver for several 'low cost' CAN interfaces that are attached via serial lines or via USB-to-serial adapters using the LAWICEL @@ -124,7 +122,6 @@ source "drivers/net/can/softing/Kconfig" config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" depends on CAN - default N ---help--- Say Y here if you want the CAN device drivers to produce a bunch of debug messages to the system log. Select this if you are having