[PATCH] can: remove useless defaults in Kconfig

[PATCH] can: remove useless defaults in Kconfig

[Kurt Van Dijck]

There's no need for "default N' (or 'default n') as it's default.

Signed-off-by: Kurt Van Dijck <kurt.van.dijck-/BeEPy95v10@public.gmane.org>
Acked-by: Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 1d699e3..ac48574 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -4,7 +4,6 @@ menu "CAN Device Drivers"
 config CAN_VCAN
 	tristate "Virtual Local CAN Interface (vcan)"
 	depends on CAN
-	default N
 	---help---
 	  Similar to the network loopback devices, vcan offers a
 	  virtual local CAN interface.
@@ -15,7 +14,6 @@ config CAN_VCAN
 config CAN_SLCAN
 	tristate "Serial / USB serial CAN Adaptors (slcan)"
 	depends on CAN
-	default N
 	---help---
 	  CAN driver for several 'low cost' CAN interfaces that are attached
 	  via serial lines or via USB-to-serial adapters using the LAWICEL
@@ -124,7 +122,6 @@ source "drivers/net/can/softing/Kconfig"
 config CAN_DEBUG_DEVICES
 	bool "CAN devices debugging messages"
 	depends on CAN
-	default N
 	---help---
 	  Say Y here if you want the CAN device drivers to produce a bunch of
 	  debug messages to the system log.  Select this if you are having

Re: [PATCH] can: remove useless defaults in Kconfig

[David Miller]

From: Kurt Van Dijck <kurt.van.dijck-/BeEPy95v10@public.gmane.org>
Date: Mon, 27 Jun 2011 17:00:13 +0200

> There's no need for "default N' (or 'default n') as it's default.
> 
> Signed-off-by: Kurt Van Dijck <kurt.van.dijck-/BeEPy95v10@public.gmane.org>
> Acked-by: Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>

Applied to net-next-2.6