From mboxrd@z Thu Jan 1 00:00:00 1970 From: lsorense@csclub.uwaterloo.ca (Lennart Sorensen) Subject: Add support for D-Link 530T rev C1 (Kernel Bug 38862) Date: Thu, 28 Jul 2011 19:18:11 -0400 Message-ID: <20110728231811.GH8562@caffeine.csclub.uwaterloo.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: Len Sorensen , linux-kernel@vger.kernel.org, Realtek linux nic maintainers , Francois Romieu , drivers_network@kernel-bugs.osdl.org To: netdev@vger.kernel.org Return-path: Content-Disposition: inline Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org The D-Link DGE-530T rev C1 is a re-badged Realtek 8169 named DLG10028C, unlike the previous revisions which were skge based. It is probably the same as the discontinued DGE-528T (0x4300) other than the PCI ID. The PCI ID is 0x1186:0x4302. Adding it to r8169.c where 0x1186:0x4300 is already found makes the card be detected and work. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=38862 Signed-off-by: Len Sorensen diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 7d9c650..c77286e 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -239,6 +239,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtl8169_pci_tbl) = { { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168), 0, 0, RTL_CFG_1 }, { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), 0, 0, RTL_CFG_0 }, { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), 0, 0, RTL_CFG_0 }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4302), 0, 0, RTL_CFG_0 }, { PCI_DEVICE(PCI_VENDOR_ID_AT, 0xc107), 0, 0, RTL_CFG_0 }, { PCI_DEVICE(0x16ec, 0x0116), 0, 0, RTL_CFG_0 }, { PCI_VENDOR_ID_LINKSYS, 0x1032, -- Len Sorensen