From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Matt Carlson" Subject: Re: re add support for bcm5750 Date: Tue, 6 Sep 2011 18:25:15 -0700 Message-ID: <20110907012515.GA9038@mcarlson.broadcom.com> References: <1280784368-4226-8-git-send-email-mcarlson@broadcom.com> <20110906170343.09252578@schatten.dmk.lab> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: "Matthew Carlson" , "netdev@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "Benjamin Li" , "Michael Chan" , "davem@davemloft.net" , "Francesco Piccinno" To: "Florian Mickler" Return-path: In-Reply-To: <20110906170343.09252578@schatten.dmk.lab> Content-Disposition: inline Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org On Tue, Sep 06, 2011 at 08:03:43AM -0700, Florian Mickler wrote: > Hi, > > in https://bugzilla.kernel.org/show_bug.cgi?id=42132 Francesco wrote: > > > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The > > ouput of lspci is: > > > > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M > > Gigabit Ethernet [14e4:167c] > > > > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this > > device. I wish to have the support for this network card back again. Thanks! Hi Florian. Are you experiencing the same problem? We found that Francesco's problem was that the firmware of his device was missing. Do you see : eth0: No firmware running messages?