* [net-next 1/7] bna: Brocade 1860 IOC PLL, Reg Defs and ASIC Mode Changes
2011-09-27 20:39 [net-next 0/7] bna: H/W enablement and update driver version to 3.0.2.2 Rasesh Mody
@ 2011-09-27 20:39 ` Rasesh Mody
2011-09-27 23:26 ` Joe Perches
2011-09-27 20:39 ` [net-next 2/7] bna: Capability Map and MFG Block Changes for New HW Rasesh Mody
` (6 subsequent siblings)
7 siblings, 1 reply; 12+ messages in thread
From: Rasesh Mody @ 2011-09-27 20:39 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody, Gurunatha Karaje
Add logic to set ASIC specfic interface in IOC, HW interface initialization
APIs, mode based initialization and MSI-X resource allocation for 1860 with
no asic block. Add new h/w specific register definitions and setup registers
used by IOC logic.
Use normal kernel declaration style, c99 initializers and const for mailbox
structures. Remove unneeded parentheses.
Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bfa_ioc.c | 8 +-
drivers/net/ethernet/brocade/bna/bfa_ioc.h | 2 +
drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c | 400 ++++++++++++++++++++++++-
3 files changed, 394 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
index 4282fef..1e60aa7 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -1981,7 +1981,13 @@ bfa_nw_ioc_pci_init(struct bfa_ioc *ioc, struct bfa_pcidev *pcidev,
BUG_ON(1);
}
- bfa_nw_ioc_set_ct_hwif(ioc);
+ /**
+ * Set asic specific interfaces.
+ */
+ if (ioc->asic_gen == BFI_ASIC_GEN_CT)
+ bfa_nw_ioc_set_ct_hwif(ioc);
+ else
+ bfa_nw_ioc_set_ct2_hwif(ioc);
bfa_ioc_map_port(ioc);
bfa_ioc_reg_init(ioc);
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.h b/drivers/net/ethernet/brocade/bna/bfa_ioc.h
index e11496d..5899a56 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.h
@@ -72,6 +72,7 @@ struct bfa_ioc_regs {
void __iomem *hfn_mbox;
void __iomem *lpu_mbox_cmd;
void __iomem *lpu_mbox;
+ void __iomem *lpu_read_stat;
void __iomem *pss_ctl_reg;
void __iomem *pss_err_status_reg;
void __iomem *app_pll_fast_ctl_reg;
@@ -287,6 +288,7 @@ void bfa_nw_ioc_mbox_regisr(struct bfa_ioc *ioc, enum bfi_mclass mc,
} while (0)
void bfa_nw_ioc_set_ct_hwif(struct bfa_ioc *ioc);
+void bfa_nw_ioc_set_ct2_hwif(struct bfa_ioc *ioc);
void bfa_nw_ioc_attach(struct bfa_ioc *ioc, void *bfa,
struct bfa_ioc_cbfn *cbfn);
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
index 7d0d8ff..bc9e598 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
@@ -37,7 +37,9 @@
static bool bfa_ioc_ct_firmware_lock(struct bfa_ioc *ioc);
static void bfa_ioc_ct_firmware_unlock(struct bfa_ioc *ioc);
static void bfa_ioc_ct_reg_init(struct bfa_ioc *ioc);
+static void bfa_ioc_ct2_reg_init(struct bfa_ioc *ioc);
static void bfa_ioc_ct_map_port(struct bfa_ioc *ioc);
+static void bfa_ioc_ct2_map_port(struct bfa_ioc *ioc);
static void bfa_ioc_ct_isr_mode_set(struct bfa_ioc *ioc, bool msix);
static void bfa_ioc_ct_notify_fail(struct bfa_ioc *ioc);
static void bfa_ioc_ct_ownership_reset(struct bfa_ioc *ioc);
@@ -48,6 +50,9 @@ static void bfa_ioc_ct_sync_ack(struct bfa_ioc *ioc);
static bool bfa_ioc_ct_sync_complete(struct bfa_ioc *ioc);
static enum bfa_status bfa_ioc_ct_pll_init(void __iomem *rb,
enum bfi_asic_mode asic_mode);
+static enum bfa_status bfa_ioc_ct2_pll_init(void __iomem *rb,
+ enum bfi_asic_mode asic_mode);
+static bool bfa_ioc_ct2_lpu_read_stat(struct bfa_ioc *ioc);
static const struct bfa_ioc_hwif nw_hwif_ct = {
.ioc_pll_init = bfa_ioc_ct_pll_init,
@@ -65,6 +70,23 @@ static const struct bfa_ioc_hwif nw_hwif_ct = {
.ioc_sync_complete = bfa_ioc_ct_sync_complete,
};
+static const struct bfa_ioc_hwif nw_hwif_ct2 = {
+ .ioc_pll_init = bfa_ioc_ct2_pll_init,
+ .ioc_firmware_lock = bfa_ioc_ct_firmware_lock,
+ .ioc_firmware_unlock = bfa_ioc_ct_firmware_unlock,
+ .ioc_reg_init = bfa_ioc_ct2_reg_init,
+ .ioc_map_port = bfa_ioc_ct2_map_port,
+ .ioc_lpu_read_stat = bfa_ioc_ct2_lpu_read_stat,
+ .ioc_isr_mode_set = NULL,
+ .ioc_notify_fail = bfa_ioc_ct_notify_fail,
+ .ioc_ownership_reset = bfa_ioc_ct_ownership_reset,
+ .ioc_sync_start = bfa_ioc_ct_sync_start,
+ .ioc_sync_join = bfa_ioc_ct_sync_join,
+ .ioc_sync_leave = bfa_ioc_ct_sync_leave,
+ .ioc_sync_ack = bfa_ioc_ct_sync_ack,
+ .ioc_sync_complete = bfa_ioc_ct_sync_complete,
+};
+
/**
* Called from bfa_ioc_attach() to map asic specific calls.
*/
@@ -74,6 +96,12 @@ bfa_nw_ioc_set_ct_hwif(struct bfa_ioc *ioc)
ioc->ioc_hwif = &nw_hwif_ct;
}
+void
+bfa_nw_ioc_set_ct2_hwif(struct bfa_ioc *ioc)
+{
+ ioc->ioc_hwif = &nw_hwif_ct2;
+}
+
/**
* Return true if firmware of current driver matches the running firmware.
*/
@@ -170,7 +198,11 @@ bfa_ioc_ct_notify_fail(struct bfa_ioc *ioc)
/**
* Host to LPU mailbox message addresses
*/
-static struct { u32 hfn_mbox, lpu_mbox, hfn_pgn; } ct_fnreg[] = {
+static const struct {
+ u32 hfn_mbox;
+ u32 lpu_mbox;
+ u32 hfn_pgn;
+} ct_fnreg[] = {
{ HOSTFN0_LPU_MBOX0_0, LPU_HOSTFN0_MBOX0_0, HOST_PAGE_NUM_FN0 },
{ HOSTFN1_LPU_MBOX0_8, LPU_HOSTFN1_MBOX0_8, HOST_PAGE_NUM_FN1 },
{ HOSTFN2_LPU_MBOX0_0, LPU_HOSTFN2_MBOX0_0, HOST_PAGE_NUM_FN2 },
@@ -180,7 +212,10 @@ static struct { u32 hfn_mbox, lpu_mbox, hfn_pgn; } ct_fnreg[] = {
/**
* Host <-> LPU mailbox command/status registers - port 0
*/
-static struct { u32 hfn, lpu; } ct_p0reg[] = {
+static const struct {
+ u32 hfn;
+ u32 lpu;
+} ct_p0reg[] = {
{ HOSTFN0_LPU0_CMD_STAT, LPU0_HOSTFN0_CMD_STAT },
{ HOSTFN1_LPU0_CMD_STAT, LPU0_HOSTFN1_CMD_STAT },
{ HOSTFN2_LPU0_CMD_STAT, LPU0_HOSTFN2_CMD_STAT },
@@ -190,13 +225,32 @@ static struct { u32 hfn, lpu; } ct_p0reg[] = {
/**
* Host <-> LPU mailbox command/status registers - port 1
*/
-static struct { u32 hfn, lpu; } ct_p1reg[] = {
+static const struct {
+ u32 hfn;
+ u32 lpu;
+} ct_p1reg[] = {
{ HOSTFN0_LPU1_CMD_STAT, LPU1_HOSTFN0_CMD_STAT },
{ HOSTFN1_LPU1_CMD_STAT, LPU1_HOSTFN1_CMD_STAT },
{ HOSTFN2_LPU1_CMD_STAT, LPU1_HOSTFN2_CMD_STAT },
{ HOSTFN3_LPU1_CMD_STAT, LPU1_HOSTFN3_CMD_STAT }
};
+static const struct {
+ u32 hfn_mbox;
+ u32 lpu_mbox;
+ u32 hfn_pgn;
+ u32 hfn;
+ u32 lpu;
+ u32 lpu_read;
+} ct2_reg[] = {
+ { CT2_HOSTFN_LPU0_MBOX0, CT2_LPU0_HOSTFN_MBOX0, CT2_HOSTFN_PAGE_NUM,
+ CT2_HOSTFN_LPU0_CMD_STAT, CT2_LPU0_HOSTFN_CMD_STAT,
+ CT2_HOSTFN_LPU0_READ_STAT},
+ { CT2_HOSTFN_LPU1_MBOX0, CT2_LPU1_HOSTFN_MBOX0, CT2_HOSTFN_PAGE_NUM,
+ CT2_HOSTFN_LPU1_CMD_STAT, CT2_LPU1_HOSTFN_CMD_STAT,
+ CT2_HOSTFN_LPU1_READ_STAT},
+};
+
static void
bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
{
@@ -218,8 +272,8 @@ bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0;
ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P1;
} else {
- ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG);
- ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG);
+ ioc->ioc_regs.heartbeat = rb + BFA_IOC1_HBEAT_REG;
+ ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC1_STATE_REG;
ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC0_STATE_REG;
ioc->ioc_regs.hfn_mbox_cmd = rb + ct_p1reg[pcifn].hfn;
ioc->ioc_regs.lpu_mbox_cmd = rb + ct_p1reg[pcifn].lpu;
@@ -230,24 +284,24 @@ bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
/*
* PSS control registers
*/
- ioc->ioc_regs.pss_ctl_reg = (rb + PSS_CTL_REG);
- ioc->ioc_regs.pss_err_status_reg = (rb + PSS_ERR_STATUS_REG);
- ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + APP_PLL_LCLK_CTL_REG);
- ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + APP_PLL_SCLK_CTL_REG);
+ ioc->ioc_regs.pss_ctl_reg = rb + PSS_CTL_REG;
+ ioc->ioc_regs.pss_err_status_reg = rb + PSS_ERR_STATUS_REG;
+ ioc->ioc_regs.app_pll_fast_ctl_reg = rb + APP_PLL_LCLK_CTL_REG;
+ ioc->ioc_regs.app_pll_slow_ctl_reg = rb + APP_PLL_SCLK_CTL_REG;
/*
* IOC semaphore registers and serialization
*/
- ioc->ioc_regs.ioc_sem_reg = (rb + HOST_SEM0_REG);
- ioc->ioc_regs.ioc_usage_sem_reg = (rb + HOST_SEM1_REG);
- ioc->ioc_regs.ioc_init_sem_reg = (rb + HOST_SEM2_REG);
- ioc->ioc_regs.ioc_usage_reg = (rb + BFA_FW_USE_COUNT);
- ioc->ioc_regs.ioc_fail_sync = (rb + BFA_IOC_FAIL_SYNC);
+ ioc->ioc_regs.ioc_sem_reg = rb + HOST_SEM0_REG;
+ ioc->ioc_regs.ioc_usage_sem_reg = rb + HOST_SEM1_REG;
+ ioc->ioc_regs.ioc_init_sem_reg = rb + HOST_SEM2_REG;
+ ioc->ioc_regs.ioc_usage_reg = rb + BFA_FW_USE_COUNT;
+ ioc->ioc_regs.ioc_fail_sync = rb + BFA_IOC_FAIL_SYNC;
/**
* sram memory access
*/
- ioc->ioc_regs.smem_page_start = (rb + PSS_SMEM_PAGE_START);
+ ioc->ioc_regs.smem_page_start = rb + PSS_SMEM_PAGE_START;
ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CT;
/*
@@ -256,6 +310,64 @@ bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
ioc->ioc_regs.err_set = (rb + ERR_SET_REG);
}
+static void
+bfa_ioc_ct2_reg_init(struct bfa_ioc *ioc)
+{
+ void __iomem *rb;
+ int port = bfa_ioc_portid(ioc);
+
+ rb = bfa_ioc_bar0(ioc);
+
+ ioc->ioc_regs.hfn_mbox = rb + ct2_reg[port].hfn_mbox;
+ ioc->ioc_regs.lpu_mbox = rb + ct2_reg[port].lpu_mbox;
+ ioc->ioc_regs.host_page_num_fn = rb + ct2_reg[port].hfn_pgn;
+ ioc->ioc_regs.hfn_mbox_cmd = rb + ct2_reg[port].hfn;
+ ioc->ioc_regs.lpu_mbox_cmd = rb + ct2_reg[port].lpu;
+ ioc->ioc_regs.lpu_read_stat = rb + ct2_reg[port].lpu_read;
+
+ if (port == 0) {
+ ioc->ioc_regs.heartbeat = rb + CT2_BFA_IOC0_HBEAT_REG;
+ ioc->ioc_regs.ioc_fwstate = rb + CT2_BFA_IOC0_STATE_REG;
+ ioc->ioc_regs.alt_ioc_fwstate = rb + CT2_BFA_IOC1_STATE_REG;
+ ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0;
+ ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P1;
+ } else {
+ ioc->ioc_regs.heartbeat = rb + CT2_BFA_IOC1_HBEAT_REG;
+ ioc->ioc_regs.ioc_fwstate = rb + CT2_BFA_IOC1_STATE_REG;
+ ioc->ioc_regs.alt_ioc_fwstate = rb + CT2_BFA_IOC0_STATE_REG;
+ ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1;
+ ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P0;
+ }
+
+ /*
+ * PSS control registers
+ */
+ ioc->ioc_regs.pss_ctl_reg = rb + PSS_CTL_REG;
+ ioc->ioc_regs.pss_err_status_reg = rb + PSS_ERR_STATUS_REG;
+ ioc->ioc_regs.app_pll_fast_ctl_reg = rb + CT2_APP_PLL_LCLK_CTL_REG;
+ ioc->ioc_regs.app_pll_slow_ctl_reg = rb + CT2_APP_PLL_SCLK_CTL_REG;
+
+ /*
+ * IOC semaphore registers and serialization
+ */
+ ioc->ioc_regs.ioc_sem_reg = rb + CT2_HOST_SEM0_REG;
+ ioc->ioc_regs.ioc_usage_sem_reg = rb + CT2_HOST_SEM1_REG;
+ ioc->ioc_regs.ioc_init_sem_reg = rb + CT2_HOST_SEM2_REG;
+ ioc->ioc_regs.ioc_usage_reg = rb + CT2_BFA_FW_USE_COUNT;
+ ioc->ioc_regs.ioc_fail_sync = rb + CT2_BFA_IOC_FAIL_SYNC;
+
+ /**
+ * sram memory access
+ */
+ ioc->ioc_regs.smem_page_start = rb + PSS_SMEM_PAGE_START;
+ ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CT;
+
+ /*
+ * err set reg : for notification of hb failure in fcmode
+ */
+ ioc->ioc_regs.err_set = rb + ERR_SET_REG;
+}
+
/**
* Initialize IOC to port mapping.
*/
@@ -276,6 +388,16 @@ bfa_ioc_ct_map_port(struct bfa_ioc *ioc)
}
+static void
+bfa_ioc_ct2_map_port(struct bfa_ioc *ioc)
+{
+ void __iomem *rb = ioc->pcidev.pci_bar_kva;
+ u32 r32;
+
+ r32 = readl(rb + CT2_HOSTFN_PERSONALITY0);
+ ioc->port_id = ((r32 & __FC_LL_PORT_MAP__MK) >> __FC_LL_PORT_MAP__SH);
+}
+
/**
* Set interrupt mode for a function: INTX or MSIX
*/
@@ -307,6 +429,50 @@ bfa_ioc_ct_isr_mode_set(struct bfa_ioc *ioc, bool msix)
writel(r32, rb + FNC_PERS_REG);
}
+static bool
+bfa_ioc_ct2_lpu_read_stat(struct bfa_ioc *ioc)
+{
+ u32 r32;
+
+ r32 = readl(ioc->ioc_regs.lpu_read_stat);
+ if (r32) {
+ writel(1, ioc->ioc_regs.lpu_read_stat);
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * MSI-X resource allocation for 1860 with no asic block
+ */
+#define HOSTFN_MSIX_DEFAULT 64
+#define HOSTFN_MSIX_VT_INDEX_MBOX_ERR 0x30138
+#define HOSTFN_MSIX_VT_OFST_NUMVT 0x3013c
+#define __MSIX_VT_NUMVT__MK 0x003ff800
+#define __MSIX_VT_NUMVT__SH 11
+#define __MSIX_VT_NUMVT_(_v) ((_v) << __MSIX_VT_NUMVT__SH)
+#define __MSIX_VT_OFST_ 0x000007ff
+void
+bfa_ioc_ct2_poweron(struct bfa_ioc *ioc)
+{
+ void __iomem *rb = ioc->pcidev.pci_bar_kva;
+ u32 r32;
+
+ r32 = readl(rb + HOSTFN_MSIX_VT_OFST_NUMVT);
+ if (r32 & __MSIX_VT_NUMVT__MK) {
+ writel(r32 & __MSIX_VT_OFST_,
+ rb + HOSTFN_MSIX_VT_INDEX_MBOX_ERR);
+ return;
+ }
+
+ writel(__MSIX_VT_NUMVT_(HOSTFN_MSIX_DEFAULT - 1) |
+ HOSTFN_MSIX_DEFAULT * bfa_ioc_pcifn(ioc),
+ rb + HOSTFN_MSIX_VT_OFST_NUMVT);
+ writel(HOSTFN_MSIX_DEFAULT * bfa_ioc_pcifn(ioc),
+ rb + HOSTFN_MSIX_VT_INDEX_MBOX_ERR);
+}
+
/**
* Cleanup hw semaphore and usecnt registers
*/
@@ -499,3 +665,207 @@ bfa_ioc_ct_pll_init(void __iomem *rb, enum bfi_asic_mode asic_mode)
writel(0, (rb + MBIST_CTL_REG));
return BFA_STATUS_OK;
}
+
+static void
+bfa_ioc_ct2_sclk_init(void __iomem *rb)
+{
+ u32 r32;
+
+ /*
+ * put s_clk PLL and PLL FSM in reset
+ */
+ r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ r32 &= ~(__APP_PLL_SCLK_ENABLE | __APP_PLL_SCLK_LRESETN);
+ r32 |= (__APP_PLL_SCLK_ENARST | __APP_PLL_SCLK_BYPASS |
+ __APP_PLL_SCLK_LOGIC_SOFT_RESET);
+ writel(r32, (rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+ /*
+ * Ignore mode and program for the max clock (which is FC16)
+ * Firmware/NFC will do the PLL init appropiately
+ */
+ r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ r32 &= ~(__APP_PLL_SCLK_REFCLK_SEL | __APP_PLL_SCLK_CLK_DIV2);
+ writel(r32, (rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+ /*
+ * while doing PLL init dont clock gate ethernet subsystem
+ */
+ r32 = readl((rb + CT2_CHIP_MISC_PRG));
+ writel((r32 | __ETH_CLK_ENABLE_PORT0),
+ (rb + CT2_CHIP_MISC_PRG));
+
+ r32 = readl((rb + CT2_PCIE_MISC_REG));
+ writel((r32 | __ETH_CLK_ENABLE_PORT1),
+ (rb + CT2_PCIE_MISC_REG));
+
+ /*
+ * set sclk value
+ */
+ r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ r32 &= (__P_SCLK_PLL_LOCK | __APP_PLL_SCLK_REFCLK_SEL |
+ __APP_PLL_SCLK_CLK_DIV2);
+ writel(r32 | 0x1061731b, (rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+ /*
+ * poll for s_clk lock or delay 1ms
+ */
+ udelay(1000);
+
+ /*
+ * Dont do clock gating for ethernet subsystem, firmware/NFC will
+ * do this appropriately
+ */
+}
+
+static void
+bfa_ioc_ct2_lclk_init(void __iomem *rb)
+{
+ u32 r32;
+
+ /*
+ * put l_clk PLL and PLL FSM in reset
+ */
+ r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+ r32 &= ~(__APP_PLL_LCLK_ENABLE | __APP_PLL_LCLK_LRESETN);
+ r32 |= (__APP_PLL_LCLK_ENARST | __APP_PLL_LCLK_BYPASS |
+ __APP_PLL_LCLK_LOGIC_SOFT_RESET);
+ writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG));
+
+ /*
+ * set LPU speed (set for FC16 which will work for other modes)
+ */
+ r32 = readl((rb + CT2_CHIP_MISC_PRG));
+ writel(r32, (rb + CT2_CHIP_MISC_PRG));
+
+ /*
+ * set LPU half speed (set for FC16 which will work for other modes)
+ */
+ r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+ writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG));
+
+ /*
+ * set lclk for mode (set for FC16)
+ */
+ r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+ r32 &= (__P_LCLK_PLL_LOCK | __APP_LPUCLK_HALFSPEED);
+ r32 |= 0x20c1731b;
+ writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG));
+
+ /*
+ * poll for s_clk lock or delay 1ms
+ */
+ udelay(1000);
+}
+
+static void
+bfa_ioc_ct2_mem_init(void __iomem *rb)
+{
+ u32 r32;
+
+ r32 = readl((rb + PSS_CTL_REG));
+ r32 &= ~__PSS_LMEM_RESET;
+ writel(r32, (rb + PSS_CTL_REG));
+ udelay(1000);
+
+ writel(__EDRAM_BISTR_START, (rb + CT2_MBIST_CTL_REG));
+ udelay(1000);
+ writel(0, (rb + CT2_MBIST_CTL_REG));
+}
+
+static void
+bfa_ioc_ct2_mac_reset(void __iomem *rb)
+{
+ volatile u32 r32;
+
+ bfa_ioc_ct2_sclk_init(rb);
+ bfa_ioc_ct2_lclk_init(rb);
+
+ /*
+ * release soft reset on s_clk & l_clk
+ */
+ r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ writel((r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET),
+ (rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+ /*
+ * release soft reset on s_clk & l_clk
+ */
+ r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+ writel((r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET),
+ (rb + CT2_APP_PLL_LCLK_CTL_REG));
+
+ /* put port0, port1 MAC & AHB in reset */
+ writel((__CSI_MAC_RESET | __CSI_MAC_AHB_RESET),
+ (rb + CT2_CSI_MAC_CONTROL_REG(0)));
+ writel((__CSI_MAC_RESET | __CSI_MAC_AHB_RESET),
+ (rb + CT2_CSI_MAC_CONTROL_REG(1)));
+}
+
+#define CT2_NFC_MAX_DELAY 1000
+static enum bfa_status
+bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode asic_mode)
+{
+ volatile u32 wgn, r32;
+ int i;
+
+ /*
+ * Initialize PLL if not already done by NFC
+ */
+ wgn = readl(rb + CT2_WGN_STATUS);
+ if (!(wgn & __GLBL_PF_VF_CFG_RDY)) {
+ writel(__HALT_NFC_CONTROLLER, (rb + CT2_NFC_CSR_SET_REG));
+ for (i = 0; i < CT2_NFC_MAX_DELAY; i++) {
+ r32 = readl(rb + CT2_NFC_CSR_SET_REG);
+ if (r32 & __NFC_CONTROLLER_HALTED)
+ break;
+ udelay(1000);
+ }
+ }
+
+ /*
+ * Mask the interrupts and clear any
+ * pending interrupts left by BIOS/EFI
+ */
+
+ writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK));
+ writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK));
+
+ r32 = readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
+ if (r32 == 1) {
+ writel(1, (rb + CT2_LPU0_HOSTFN_CMD_STAT));
+ readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
+ }
+ r32 = readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
+ if (r32 == 1) {
+ writel(1, (rb + CT2_LPU1_HOSTFN_CMD_STAT));
+ readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
+ }
+
+ bfa_ioc_ct2_mac_reset(rb);
+ bfa_ioc_ct2_sclk_init(rb);
+ bfa_ioc_ct2_lclk_init(rb);
+
+ /*
+ * release soft reset on s_clk & l_clk
+ */
+ r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ writel((r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET),
+ (rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+ /*
+ * Announce flash device presence, if flash was corrupted.
+ */
+ if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) {
+ r32 = readl((rb + PSS_GPIO_OUT_REG));
+ writel((r32 & ~1), (rb + PSS_GPIO_OUT_REG));
+ r32 = readl((rb + PSS_GPIO_OE_REG));
+ writel((r32 | 1), (rb + PSS_GPIO_OE_REG));
+ }
+
+ bfa_ioc_ct2_mem_init(rb);
+
+ writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC0_STATE_REG));
+ writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC1_STATE_REG));
+ return BFA_STATUS_OK;
+}
--
1.7.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [net-next 1/7] bna: Brocade 1860 IOC PLL, Reg Defs and ASIC Mode Changes
2011-09-27 20:39 ` [net-next 1/7] bna: Brocade 1860 IOC PLL, Reg Defs and ASIC Mode Changes Rasesh Mody
@ 2011-09-27 23:26 ` Joe Perches
0 siblings, 0 replies; 12+ messages in thread
From: Joe Perches @ 2011-09-27 23:26 UTC (permalink / raw)
To: Rasesh Mody; +Cc: davem, netdev, adapter_linux_open_src_team, Gurunatha Karaje
On Tue, 2011-09-27 at 13:39 -0700, Rasesh Mody wrote:
> Add logic to set ASIC specfic interface in IOC, HW interface initialization
> APIs, mode based initialization and MSI-X resource allocation for 1860 with
> no asic block. Add new h/w specific register definitions and setup registers
> used by IOC logic.
decidedly trivial...
> diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
[]
> @@ -1981,7 +1981,13 @@ bfa_nw_ioc_pci_init(struct bfa_ioc *ioc, struct bfa_pcidev *pcidev,
> BUG_ON(1);
> }
>
> - bfa_nw_ioc_set_ct_hwif(ioc);
> + /**
> + * Set asic specific interfaces.
> + */
> + if (ioc->asic_gen == BFI_ASIC_GEN_CT)
> + bfa_nw_ioc_set_ct_hwif(ioc);
> + else
> + bfa_nw_ioc_set_ct2_hwif(ioc);
[]
> diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
[]
> /**
> * sram memory access
> */
> @@ -256,6 +310,64 @@ bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
[]
> + /**
> + * sram memory access
> + */
There's at least a few places where this introductory /**
comment style is used. Perhaps this confuses kernel-doc.
I think that it should just be /*
^ permalink raw reply [flat|nested] 12+ messages in thread
* [net-next 2/7] bna: Capability Map and MFG Block Changes for New HW
2011-09-27 20:39 [net-next 0/7] bna: H/W enablement and update driver version to 3.0.2.2 Rasesh Mody
2011-09-27 20:39 ` [net-next 1/7] bna: Brocade 1860 IOC PLL, Reg Defs and ASIC Mode Changes Rasesh Mody
@ 2011-09-27 20:39 ` Rasesh Mody
2011-09-27 20:39 ` [net-next 3/7] bna: Implement FW Download " Rasesh Mody
` (5 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Rasesh Mody @ 2011-09-27 20:39 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody, Gurunatha Karaje
Add capability map and generic model name scheme for manufacturing block.
Add card types for new HW.
Remove bfa_mfg_is_card_type_valid and ibfa_mfg_adapter_prop_init_flash_ct
macros.
Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bfa_defs.h | 12 +++++-
.../net/ethernet/brocade/bna/bfa_defs_mfg_comm.h | 44 +++----------------
2 files changed, 18 insertions(+), 38 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bfa_defs.h b/drivers/net/ethernet/brocade/bna/bfa_defs.h
index a81c0cc..66a6207 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_defs.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs.h
@@ -241,7 +241,17 @@ struct bfa_mfg_block {
u8 num_mac; /*!< number of mac addresses */
u8 rsv2;
u32 card_type; /*!< card type */
- u8 rsv3[108];
+ char cap_nic; /*!< capability nic */
+ char cap_cna; /*!< capability cna */
+ char cap_hba; /*!< capability hba */
+ char cap_fc16g; /*!< capability fc 16g */
+ char cap_sriov; /*!< capability sriov */
+ char cap_mezz; /*!< capability mezz */
+ u8 rsv3;
+ u8 mfg_nports; /*!< number of ports */
+ char media[8]; /*!< xfi/xaui */
+ char initial_mode[8];/*!< initial mode: hba/cna/nic */
+ u8 rsv4[84];
u8 md5_chksum[BFA_MFG_CHKSUM_SIZE]; /*!< md5 checksum */
};
diff --git a/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h b/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h
index 7e5df90..6681fe8 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h
@@ -60,6 +60,11 @@ enum {
BFA_MFG_TYPE_ASTRA = 807, /*!< Astra mezz card */
BFA_MFG_TYPE_LIGHTNING_P0 = 902, /*!< Lightning mezz card - old */
BFA_MFG_TYPE_LIGHTNING = 1741, /*!< Lightning mezz card */
+ BFA_MFG_TYPE_PROWLER_F = 1560, /*!< Prowler FC only cards */
+ BFA_MFG_TYPE_PROWLER_N = 1410, /*!< Prowler NIC only cards */
+ BFA_MFG_TYPE_PROWLER_C = 1710, /*!< Prowler CNA only cards */
+ BFA_MFG_TYPE_PROWLER_D = 1860, /*!< Prowler Dual cards */
+ BFA_MFG_TYPE_CHINOOK = 1867, /*!< Chinook cards */
BFA_MFG_TYPE_INVALID = 0, /*!< Invalid card type */
};
@@ -73,43 +78,8 @@ enum {
(type) == BFA_MFG_TYPE_WANCHESE || \
(type) == BFA_MFG_TYPE_ASTRA || \
(type) == BFA_MFG_TYPE_LIGHTNING_P0 || \
- (type) == BFA_MFG_TYPE_LIGHTNING))
-
-/**
- * Check if card type valid
- */
-#define bfa_mfg_is_card_type_valid(type) (( \
- (type) == BFA_MFG_TYPE_FC8P2 || \
- (type) == BFA_MFG_TYPE_FC8P1 || \
- (type) == BFA_MFG_TYPE_FC4P2 || \
- (type) == BFA_MFG_TYPE_FC4P1 || \
- (type) == BFA_MFG_TYPE_CNA10P2 || \
- (type) == BFA_MFG_TYPE_CNA10P1 || \
- bfa_mfg_is_mezz(type)))
-
-#define bfa_mfg_adapter_prop_init_flash_ct(mfgblk, prop) \
-do { \
- switch ((mfgblk)->card_type) { \
- case BFA_MFG_TYPE_JAYHAWK: \
- case BFA_MFG_TYPE_ASTRA: \
- (prop) = BFI_ADAPTER_SETP(NPORTS, 2) | \
- BFI_ADAPTER_SETP(SPEED, 8); \
- break; \
- case BFA_MFG_TYPE_CNA10P2: \
- case BFA_MFG_TYPE_WANCHESE: \
- case BFA_MFG_TYPE_LIGHTNING_P0: \
- case BFA_MFG_TYPE_LIGHTNING: \
- (prop) = BFI_ADAPTER_SETP(NPORTS, 2); \
- (prop) |= BFI_ADAPTER_SETP(SPEED, 10); \
- break; \
- case BFA_MFG_TYPE_CNA10P1: \
- (prop) = BFI_ADAPTER_SETP(NPORTS, 1); \
- (prop) |= BFI_ADAPTER_SETP(SPEED, 10); \
- break; \
- default: \
- (prop) = BFI_ADAPTER_UNSUPP; \
- } \
-} while (0)
+ (type) == BFA_MFG_TYPE_LIGHTNING || \
+ (type) == BFA_MFG_TYPE_CHINOOK))
enum {
CB_GPIO_TTV = (1), /*!< TTV debug capable cards */
--
1.7.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [net-next 3/7] bna: Implement FW Download for New HW
2011-09-27 20:39 [net-next 0/7] bna: H/W enablement and update driver version to 3.0.2.2 Rasesh Mody
2011-09-27 20:39 ` [net-next 1/7] bna: Brocade 1860 IOC PLL, Reg Defs and ASIC Mode Changes Rasesh Mody
2011-09-27 20:39 ` [net-next 2/7] bna: Capability Map and MFG Block Changes for New HW Rasesh Mody
@ 2011-09-27 20:39 ` Rasesh Mody
2011-09-27 20:39 ` [net-next 4/7] bna: Brocade 1860 HW Enablement Rasesh Mody
` (4 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Rasesh Mody @ 2011-09-27 20:39 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody, Gurunatha Karaje
Add new device ID 0x22 and new asic generation BFI_ASIC_GEN_CT2 for 1860.
Implement FW download from user space for new Brocade HW.
Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bfa_defs.h | 7 ++++
drivers/net/ethernet/brocade/bna/bfi.h | 1 +
drivers/net/ethernet/brocade/bna/bnad.c | 1 +
drivers/net/ethernet/brocade/bna/cna.h | 1 +
drivers/net/ethernet/brocade/bna/cna_fwimg.c | 48 ++++++++++++++++++++-----
5 files changed, 48 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bfa_defs.h b/drivers/net/ethernet/brocade/bna/bfa_defs.h
index 66a6207..f9d4100 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_defs.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs.h
@@ -261,6 +261,13 @@ struct bfa_mfg_block {
* ---------------------- pci definitions ------------
*/
+/*
+ * PCI device ID information
+ */
+enum {
+ BFA_PCI_DEVICE_ID_CT2 = 0x22,
+};
+
#define bfa_asic_id_ct(device) \
((device) == PCI_DEVICE_ID_BROCADE_CT || \
(device) == PCI_DEVICE_ID_BROCADE_CT_FC)
diff --git a/drivers/net/ethernet/brocade/bna/bfi.h b/drivers/net/ethernet/brocade/bna/bfi.h
index 4e04c14..54bcafe 100644
--- a/drivers/net/ethernet/brocade/bna/bfi.h
+++ b/drivers/net/ethernet/brocade/bna/bfi.h
@@ -159,6 +159,7 @@ enum bfi_mclass {
enum bfi_asic_gen {
BFI_ASIC_GEN_CB = 1,
BFI_ASIC_GEN_CT = 2,
+ BFI_ASIC_GEN_CT2 = 3,
};
enum bfi_asic_mode {
diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index db6c097..320f11c 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -3477,3 +3477,4 @@ MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Brocade 10G PCIe Ethernet driver");
MODULE_VERSION(BNAD_VERSION);
MODULE_FIRMWARE(CNA_FW_FILE_CT);
+MODULE_FIRMWARE(CNA_FW_FILE_CT2);
diff --git a/drivers/net/ethernet/brocade/bna/cna.h b/drivers/net/ethernet/brocade/bna/cna.h
index cb48742..1b3e90d 100644
--- a/drivers/net/ethernet/brocade/bna/cna.h
+++ b/drivers/net/ethernet/brocade/bna/cna.h
@@ -38,6 +38,7 @@
extern char bfa_version[];
#define CNA_FW_FILE_CT "ctfw.bin"
+#define CNA_FW_FILE_CT2 "ct2fw.bin"
#define FC_SYMNAME_MAX 256 /*!< max name server symbolic name size */
#pragma pack(1)
diff --git a/drivers/net/ethernet/brocade/bna/cna_fwimg.c b/drivers/net/ethernet/brocade/bna/cna_fwimg.c
index e8f4ecd..725b9ff 100644
--- a/drivers/net/ethernet/brocade/bna/cna_fwimg.c
+++ b/drivers/net/ethernet/brocade/bna/cna_fwimg.c
@@ -16,11 +16,12 @@
* www.brocade.com
*/
#include <linux/firmware.h>
+#include "bfi.h"
#include "cna.h"
const struct firmware *bfi_fw;
-static u32 *bfi_image_ct_cna;
-static u32 bfi_image_ct_cna_size;
+static u32 *bfi_image_ct_cna, *bfi_image_ct2_cna;
+static u32 bfi_image_ct_cna_size, bfi_image_ct2_cna_size;
static u32 *
cna_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
@@ -45,20 +46,47 @@ error:
u32 *
cna_get_firmware_buf(struct pci_dev *pdev)
{
- if (bfi_image_ct_cna_size == 0)
- cna_read_firmware(pdev, &bfi_image_ct_cna,
- &bfi_image_ct_cna_size, CNA_FW_FILE_CT);
- return bfi_image_ct_cna;
+ if (pdev->device == BFA_PCI_DEVICE_ID_CT2) {
+ if (bfi_image_ct2_cna_size == 0)
+ cna_read_firmware(pdev, &bfi_image_ct2_cna,
+ &bfi_image_ct2_cna_size, CNA_FW_FILE_CT2);
+ return bfi_image_ct2_cna;
+ } else if (bfa_asic_id_ct(pdev->device)) {
+ if (bfi_image_ct_cna_size == 0)
+ cna_read_firmware(pdev, &bfi_image_ct_cna,
+ &bfi_image_ct_cna_size, CNA_FW_FILE_CT);
+ return bfi_image_ct_cna;
+ }
+
+ return NULL;
}
u32 *
-bfa_cb_image_get_chunk(int type, u32 off)
+bfa_cb_image_get_chunk(enum bfi_asic_gen asic_gen, u32 off)
{
- return (u32 *)(bfi_image_ct_cna + off);
+ switch (asic_gen) {
+ case BFI_ASIC_GEN_CT:
+ return (u32 *)(bfi_image_ct_cna + off);
+ break;
+ case BFI_ASIC_GEN_CT2:
+ return (u32 *)(bfi_image_ct2_cna + off);
+ break;
+ default:
+ return NULL;
+ }
}
u32
-bfa_cb_image_get_size(int type)
+bfa_cb_image_get_size(enum bfi_asic_gen asic_gen)
{
- return bfi_image_ct_cna_size;
+ switch (asic_gen) {
+ case BFI_ASIC_GEN_CT:
+ return bfi_image_ct_cna_size;
+ break;
+ case BFI_ASIC_GEN_CT2:
+ return bfi_image_ct2_cna_size;
+ break;
+ default:
+ return 0;
+ }
}
--
1.7.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [net-next 4/7] bna: Brocade 1860 HW Enablement
2011-09-27 20:39 [net-next 0/7] bna: H/W enablement and update driver version to 3.0.2.2 Rasesh Mody
` (2 preceding siblings ...)
2011-09-27 20:39 ` [net-next 3/7] bna: Implement FW Download " Rasesh Mody
@ 2011-09-27 20:39 ` Rasesh Mody
2011-09-27 20:39 ` [net-next 5/7] bna: PLL Init Fix and Add Stats Attributes Rasesh Mody
` (3 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Rasesh Mody @ 2011-09-27 20:39 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody, Gurunatha Karaje
This patch enables new HW Brocade 1860. Add BFA_CM_NIC capability mask to
bfa_ioc_attr, Sub-System Device ID Info and support for Brocade 1860 device
ID to bfa_ioc.c and bnad.c.
Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bfa_defs.h | 16 +++++++++++++++-
drivers/net/ethernet/brocade/bna/bfa_ioc.c | 23 +++++++++++++++++++++++
drivers/net/ethernet/brocade/bna/bfa_ioc.h | 1 +
drivers/net/ethernet/brocade/bna/bna_hw_defs.h | 4 ++++
drivers/net/ethernet/brocade/bna/bnad.c | 9 ++++++++-
5 files changed, 51 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bfa_defs.h b/drivers/net/ethernet/brocade/bna/bfa_defs.h
index f9d4100..2f12d68 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_defs.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs.h
@@ -193,6 +193,7 @@ struct bfa_ioc_attr {
enum {
BFA_CM_HBA = 0x01,
BFA_CM_CNA = 0x02,
+ BFA_CM_NIC = 0x04,
};
/**
@@ -271,7 +272,20 @@ enum {
#define bfa_asic_id_ct(device) \
((device) == PCI_DEVICE_ID_BROCADE_CT || \
(device) == PCI_DEVICE_ID_BROCADE_CT_FC)
-#define bfa_asic_id_ctc(device) (bfa_asic_id_ct(device))
+#define bfa_asic_id_ct2(device) \
+ ((device) == BFA_PCI_DEVICE_ID_CT2)
+#define bfa_asic_id_ctc(device) \
+ (bfa_asic_id_ct(device) || bfa_asic_id_ct2(device))
+
+/**
+ * PCI sub-system device and vendor ID information
+ */
+enum {
+ BFA_PCI_FCOE_SSDEVICE_ID = 0x14,
+ BFA_PCI_CT2_SSID_FCoE = 0x22,
+ BFA_PCI_CT2_SSID_ETH = 0x23,
+ BFA_PCI_CT2_SSID_FC = 0x24,
+};
enum bfa_mode {
BFA_MODE_HBA = 1,
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
index 1e60aa7..f89ac7a 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -1977,6 +1977,29 @@ bfa_nw_ioc_pci_init(struct bfa_ioc *ioc, struct bfa_pcidev *pcidev,
ioc->ad_cap_bm = BFA_CM_CNA;
break;
+ case BFA_PCI_DEVICE_ID_CT2:
+ ioc->asic_gen = BFI_ASIC_GEN_CT2;
+ if (clscode == BFI_PCIFN_CLASS_FC &&
+ pcidev->ssid == BFA_PCI_CT2_SSID_FC) {
+ ioc->asic_mode = BFI_ASIC_MODE_FC16;
+ ioc->fcmode = true;
+ ioc->port_mode = ioc->port_mode_cfg = BFA_MODE_HBA;
+ ioc->ad_cap_bm = BFA_CM_HBA;
+ } else {
+ ioc->port0_mode = ioc->port1_mode = BFI_PORT_MODE_ETH;
+ ioc->asic_mode = BFI_ASIC_MODE_ETH;
+ if (pcidev->ssid == BFA_PCI_CT2_SSID_FCoE) {
+ ioc->port_mode =
+ ioc->port_mode_cfg = BFA_MODE_CNA;
+ ioc->ad_cap_bm = BFA_CM_CNA;
+ } else {
+ ioc->port_mode =
+ ioc->port_mode_cfg = BFA_MODE_NIC;
+ ioc->ad_cap_bm = BFA_CM_NIC;
+ }
+ }
+ break;
+
default:
BUG_ON(1);
}
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.h b/drivers/net/ethernet/brocade/bna/bfa_ioc.h
index 5899a56..c398170 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.h
@@ -35,6 +35,7 @@ struct bfa_pcidev {
int pci_slot;
u8 pci_func;
u16 device_id;
+ u16 ssid;
void __iomem *pci_bar_kva;
};
diff --git a/drivers/net/ethernet/brocade/bna/bna_hw_defs.h b/drivers/net/ethernet/brocade/bna/bna_hw_defs.h
index dde8a46..4c6aab2 100644
--- a/drivers/net/ethernet/brocade/bna/bna_hw_defs.h
+++ b/drivers/net/ethernet/brocade/bna/bna_hw_defs.h
@@ -133,6 +133,10 @@
ct_reg_addr_init((_bna), (_pcidev)); \
ct_bit_defn_init((_bna), (_pcidev)); \
break; \
+ case BFA_PCI_DEVICE_ID_CT2: \
+ ct2_reg_addr_init((_bna), (_pcidev)); \
+ ct2_bit_defn_init((_bna), (_pcidev)); \
+ break; \
} \
}
diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index 320f11c..d76d7cb 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -3428,7 +3428,14 @@ static DEFINE_PCI_DEVICE_TABLE(bnad_pci_id_table) = {
PCI_DEVICE_ID_BROCADE_CT),
.class = PCI_CLASS_NETWORK_ETHERNET << 8,
.class_mask = 0xffff00
- }, {0, }
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_BROCADE,
+ BFA_PCI_DEVICE_ID_CT2),
+ .class = PCI_CLASS_NETWORK_ETHERNET << 8,
+ .class_mask = 0xffff00
+ },
+ {0, },
};
MODULE_DEVICE_TABLE(pci, bnad_pci_id_table);
--
1.7.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [net-next 5/7] bna: PLL Init Fix and Add Stats Attributes
2011-09-27 20:39 [net-next 0/7] bna: H/W enablement and update driver version to 3.0.2.2 Rasesh Mody
` (3 preceding siblings ...)
2011-09-27 20:39 ` [net-next 4/7] bna: Brocade 1860 HW Enablement Rasesh Mody
@ 2011-09-27 20:39 ` Rasesh Mody
2011-09-27 20:39 ` [net-next 6/7] bna: Add Callback to Fix RXQ Stop Rasesh Mody
` (2 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Rasesh Mody @ 2011-09-27 20:39 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody, Gurunatha Karaje
Change details:
- Fix to release soft reset in PLL init for HW
- Added stats attributes and new bfi msg class
- Removed some unused code and typo fixes
Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bfa_defs_cna.h | 8 +++++++-
drivers/net/ethernet/brocade/bna/bfa_ioc.c | 18 ++++++------------
drivers/net/ethernet/brocade/bna/bfa_ioc.h | 12 ++----------
drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c | 9 ++++++++-
drivers/net/ethernet/brocade/bna/bfi.h | 19 ++++++++++---------
5 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h b/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h
index 7e0a918..8ab33ee 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h
@@ -15,7 +15,6 @@
* All rights reserved
* www.brocade.com
*/
-
#ifndef __BFA_DEFS_CNA_H__
#define __BFA_DEFS_CNA_H__
@@ -55,6 +54,9 @@ struct bfa_port_fc_stats {
u64 bad_os_count; /*!< Invalid ordered sets */
u64 err_enc_out; /*!< Encoding err nonframe_8b10b */
u64 err_enc; /*!< Encoding err frame_8b10b */
+ u64 bbsc_frames_lost; /*!< Credit Recovery-Frames Lost */
+ u64 bbsc_credits_lost; /*!< Credit Recovery-Credits Lost */
+ u64 bbsc_link_resets; /*!< Credit Recovery-Link Resets */
};
/**
@@ -100,6 +102,10 @@ struct bfa_port_eth_stats {
u64 rx_fcoe_zero_pause; /*!< Rx FCoE zero pause */
u64 tx_fcoe_pause; /*!< Tx FCoE pause */
u64 tx_fcoe_zero_pause; /*!< Tx FCoE zero pause */
+ u64 rx_iscsi_pause; /*!< Rx iSCSI pause */
+ u64 rx_iscsi_zero_pause; /*!< Rx iSCSI zero pause */
+ u64 tx_iscsi_pause; /*!< Tx iSCSI pause */
+ u64 tx_iscsi_zero_pause; /*!< Tx iSCSI zero pause */
};
/**
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
index f89ac7a..e02d607 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -17,8 +17,6 @@
*/
#include "bfa_ioc.h"
-#include "cna.h"
-#include "bfi.h"
#include "bfi_reg.h"
#include "bfa_defs.h"
@@ -140,10 +138,6 @@ static struct bfa_sm_table ioc_sm_table[] = {
{BFA_SM(bfa_ioc_sm_hwfail), BFA_IOC_HWFAIL},
};
-/**
- * IOCPF state machine definitions/declarations
- */
-
/*
* Forward declareations for iocpf state machine
*/
@@ -427,7 +421,7 @@ bfa_ioc_sm_disabling_entry(struct bfa_ioc *ioc)
}
/**
- * IOC is being desabled
+ * IOC is being disabled
*/
static void
bfa_ioc_sm_disabling(struct bfa_ioc *ioc, enum ioc_event event)
@@ -457,7 +451,7 @@ bfa_ioc_sm_disabling(struct bfa_ioc *ioc, enum ioc_event event)
}
/**
- * IOC desable completion entry.
+ * IOC disable completion entry.
*/
static void
bfa_ioc_sm_disabled_entry(struct bfa_ioc *ioc)
@@ -782,7 +776,7 @@ static void
bfa_iocpf_sm_hwinit_entry(struct bfa_iocpf *iocpf)
{
iocpf->poll_time = 0;
- bfa_ioc_reset(iocpf->ioc, 0);
+ bfa_ioc_reset(iocpf->ioc, false);
}
/**
@@ -1759,6 +1753,9 @@ bfa_ioc_fail_notify(struct bfa_ioc *ioc)
bfa_ioc_event_notify(ioc, BFA_IOC_E_FAILED);
}
+/**
+ * IOCPF to IOC interface
+ */
static void
bfa_ioc_pf_enabled(struct bfa_ioc *ioc)
{
@@ -2292,9 +2289,6 @@ bfa_ioc_get_adapter_model(struct bfa_ioc *ioc, char *model)
ioc_attr = ioc->attr;
- /**
- * model name
- */
snprintf(model, BFA_ADAPTER_MODEL_NAME_LEN, "%s-%u",
BFA_MFG_NAME, ioc_attr->card_type);
}
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.h b/drivers/net/ethernet/brocade/bna/bfa_ioc.h
index c398170..d5a21f4 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.h
@@ -152,16 +152,7 @@ struct bfa_ioc_notify {
};
/**
- * Heartbeat failure notification queue element.
- */
-struct bfa_ioc_hbfail_notify {
- struct list_head qe;
- bfa_ioc_hbfail_cbfn_t cbfn;
- void *cbarg;
-};
-
-/**
- * Initialize a heartbeat failure notification structure
+ * Initialize a IOC event notification structure
*/
#define bfa_ioc_notify_init(__notify, __cbfn, __cbarg) do { \
(__notify)->cbfn = (__cbfn); \
@@ -290,6 +281,7 @@ void bfa_nw_ioc_mbox_regisr(struct bfa_ioc *ioc, enum bfi_mclass mc,
void bfa_nw_ioc_set_ct_hwif(struct bfa_ioc *ioc);
void bfa_nw_ioc_set_ct2_hwif(struct bfa_ioc *ioc);
+void bfa_ioc_ct2_poweron(struct bfa_ioc *ioc);
void bfa_nw_ioc_attach(struct bfa_ioc *ioc, void *bfa,
struct bfa_ioc_cbfn *cbfn);
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
index bc9e598..c2d3b1a 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
@@ -850,10 +850,17 @@ bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode asic_mode)
* release soft reset on s_clk & l_clk
*/
r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
- writel((r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET),
+ writel((r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET),
(rb + CT2_APP_PLL_SCLK_CTL_REG));
/*
+ * release soft reset on s_clk & l_clk
+ */
+ r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+ writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET,
+ (rb + CT2_APP_PLL_LCLK_CTL_REG));
+
+ /*
* Announce flash device presence, if flash was corrupted.
*/
if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) {
diff --git a/drivers/net/ethernet/brocade/bna/bfi.h b/drivers/net/ethernet/brocade/bna/bfi.h
index 54bcafe..7a1393a 100644
--- a/drivers/net/ethernet/brocade/bna/bfi.h
+++ b/drivers/net/ethernet/brocade/bna/bfi.h
@@ -135,18 +135,22 @@ enum bfi_mclass {
BFI_MC_SFP = 22, /*!< SFP module */
BFI_MC_MSGQ = 23, /*!< MSGQ */
BFI_MC_ENET = 24, /*!< ENET commands/responses */
- BFI_MC_MAX = 32
+ BFI_MC_PHY = 25, /*!< External PHY message class */
+ BFI_MC_NBOOT = 26, /*!< Network Boot */
+ BFI_MC_TIO_READ = 27, /*!< read IO (Target mode) */
+ BFI_MC_TIO_WRITE = 28, /*!< write IO (Target mode) */
+ BFI_MC_TIO_DATA_XFERED = 29, /*!< ds transferred (target mode) */
+ BFI_MC_TIO_IO = 30, /*!< IO (Target mode) */
+ BFI_MC_TIO = 31, /*!< IO (target mode) */
+ BFI_MC_MFG = 32, /*!< MFG/ASIC block commands */
+ BFI_MC_EDMA = 33, /*!< EDMA copy commands */
+ BFI_MC_MAX = 34
};
-#define BFI_IOC_MAX_CQS 4
-#define BFI_IOC_MAX_CQS_ASIC 8
#define BFI_IOC_MSGLEN_MAX 32 /* 32 bytes */
#define BFI_FWBOOT_ENV_OS 0
-#define BFI_BOOT_MEMTEST_RES_ADDR 0x900
-#define BFI_BOOT_MEMTEST_RES_SIG 0xA0A1A2A3
-
/**
*----------------------------------------------------------------------
* IOC
@@ -280,9 +284,6 @@ enum bfi_port_mode {
BFI_PORT_MODE_ETH = 2,
};
-/**
- * BFI_IOC_I2H_READY_EVENT message
- */
struct bfi_ioc_hbeat {
struct bfi_mhdr mh; /*!< common msg header */
u32 hb_count; /*!< current heart beat count */
--
1.7.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [net-next 6/7] bna: Add Callback to Fix RXQ Stop
2011-09-27 20:39 [net-next 0/7] bna: H/W enablement and update driver version to 3.0.2.2 Rasesh Mody
` (4 preceding siblings ...)
2011-09-27 20:39 ` [net-next 5/7] bna: PLL Init Fix and Add Stats Attributes Rasesh Mody
@ 2011-09-27 20:39 ` Rasesh Mody
2011-09-27 20:39 ` [net-next 7/7] bna: Driver Version changed to 3.0.2.2 Rasesh Mody
2011-09-28 6:59 ` [net-next 0/7] bna: H/W enablement and update driver version " David Miller
7 siblings, 0 replies; 12+ messages in thread
From: Rasesh Mody @ 2011-09-27 20:39 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody, Gurunatha Karaje
Change details:
- Add a callback in the BNA, which is called before sending FW command to stop
RxQs. After this callback is called, driver should not post anymore Rx
buffers to the RxQ. This addresses a small window where driver posts Rx
buffers while FW is stopping/has stopped the RxQ.
- Registering callback function, rx_stall_cbfn, during bna_rx_create.
Invoking callback function, rx_stall_cbfn, before sending rx_cfg_clr
command to FW
- Bnad_cb_rx_stall implementation - set a flag in the Rxq to mark buffer
posting disabled state. While posting buffers check for the above flag.
Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bna_tx_rx.c | 11 +++++++++++
drivers/net/ethernet/brocade/bna/bna_types.h | 2 ++
drivers/net/ethernet/brocade/bna/bnad.c | 25 ++++++++++++++++++++++++-
drivers/net/ethernet/brocade/bna/bnad.h | 1 +
4 files changed, 38 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
index 066704e..276fcb5 100644
--- a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
+++ b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
@@ -1335,6 +1335,12 @@ do { \
} \
} while (0)
+#define call_rx_stall_cbfn(rx) \
+do { \
+ if ((rx)->rx_stall_cbfn) \
+ (rx)->rx_stall_cbfn((rx)->bna->bnad, (rx)); \
+} while (0)
+
#define bfi_enet_datapath_q_init(bfi_q, bna_qpt) \
do { \
struct bna_dma_addr cur_q_addr = \
@@ -1467,6 +1473,7 @@ bna_rx_sm_rxf_stop_wait(struct bna_rx *rx, enum bna_rx_event event)
case RX_E_FAIL:
bfa_fsm_set_state(rx, bna_rx_sm_cleanup_wait);
bna_rxf_fail(&rx->rxf);
+ call_rx_stall_cbfn(rx);
rx->rx_cleanup_cbfn(rx->bna->bnad, rx);
break;
@@ -1476,6 +1483,7 @@ bna_rx_sm_rxf_stop_wait(struct bna_rx *rx, enum bna_rx_event event)
case RX_E_RXF_STOPPED:
bfa_fsm_set_state(rx, bna_rx_sm_stop_wait);
+ call_rx_stall_cbfn(rx);
bna_rx_enet_stop(rx);
break;
@@ -1516,6 +1524,7 @@ bna_rx_sm_started(struct bna_rx *rx, enum bna_rx_event event)
bfa_fsm_set_state(rx, bna_rx_sm_failed);
bna_ethport_cb_rx_stopped(&rx->bna->ethport);
bna_rxf_fail(&rx->rxf);
+ call_rx_stall_cbfn(rx);
rx->rx_cleanup_cbfn(rx->bna->bnad, rx);
break;
@@ -1536,6 +1545,7 @@ static void bna_rx_sm_rxf_start_wait(struct bna_rx *rx,
case RX_E_FAIL:
bfa_fsm_set_state(rx, bna_rx_sm_failed);
bna_rxf_fail(&rx->rxf);
+ call_rx_stall_cbfn(rx);
rx->rx_cleanup_cbfn(rx->bna->bnad, rx);
break;
@@ -2369,6 +2379,7 @@ bna_rx_create(struct bna *bna, struct bnad *bnad,
rx->rcb_destroy_cbfn = rx_cbfn->rcb_destroy_cbfn;
rx->ccb_setup_cbfn = rx_cbfn->ccb_setup_cbfn;
rx->ccb_destroy_cbfn = rx_cbfn->ccb_destroy_cbfn;
+ rx->rx_stall_cbfn = rx_cbfn->rx_stall_cbfn;
/* Following callbacks are mandatory */
rx->rx_cleanup_cbfn = rx_cbfn->rx_cleanup_cbfn;
rx->rx_post_cbfn = rx_cbfn->rx_post_cbfn;
diff --git a/drivers/net/ethernet/brocade/bna/bna_types.h b/drivers/net/ethernet/brocade/bna/bna_types.h
index 242d799..d090fbf 100644
--- a/drivers/net/ethernet/brocade/bna/bna_types.h
+++ b/drivers/net/ethernet/brocade/bna/bna_types.h
@@ -847,6 +847,7 @@ struct bna_rx {
void (*rcb_destroy_cbfn)(struct bnad *, struct bna_rcb *);
void (*ccb_setup_cbfn)(struct bnad *, struct bna_ccb *);
void (*ccb_destroy_cbfn)(struct bnad *, struct bna_ccb *);
+ void (*rx_stall_cbfn)(struct bnad *, struct bna_rx *);
void (*rx_cleanup_cbfn)(struct bnad *, struct bna_rx *);
void (*rx_post_cbfn)(struct bnad *, struct bna_rx *);
@@ -864,6 +865,7 @@ struct bna_rx_event_cbfn {
void (*rcb_destroy_cbfn)(struct bnad *, struct bna_rcb *);
void (*ccb_setup_cbfn)(struct bnad *, struct bna_ccb *);
void (*ccb_destroy_cbfn)(struct bnad *, struct bna_ccb *);
+ void (*rx_stall_cbfn)(struct bnad *, struct bna_rx *);
/* Mandatory */
void (*rx_cleanup_cbfn)(struct bnad *, struct bna_rx *);
void (*rx_post_cbfn)(struct bnad *, struct bna_rx *);
diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index d76d7cb..2f4ced6 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -396,7 +396,7 @@ finishing:
unmap_q->producer_index = unmap_prod;
rcb->producer_index = unmap_prod;
smp_mb();
- if (likely(test_bit(BNAD_RXQ_STARTED, &rcb->flags)))
+ if (likely(test_bit(BNAD_RXQ_POST_OK, &rcb->flags)))
bna_rxq_prod_indx_doorbell(rcb);
}
}
@@ -956,6 +956,27 @@ bnad_cb_tx_cleanup(struct bnad *bnad, struct bna_tx *tx)
}
static void
+bnad_cb_rx_stall(struct bnad *bnad, struct bna_rx *rx)
+{
+ struct bnad_rx_info *rx_info = (struct bnad_rx_info *)rx->priv;
+ struct bna_ccb *ccb;
+ struct bnad_rx_ctrl *rx_ctrl;
+ int i;
+
+ for (i = 0; i < BNAD_MAX_RXP_PER_RX; i++) {
+ rx_ctrl = &rx_info->rx_ctrl[i];
+ ccb = rx_ctrl->ccb;
+ if (!ccb)
+ continue;
+
+ clear_bit(BNAD_RXQ_POST_OK, &ccb->rcb[0]->flags);
+
+ if (ccb->rcb[1])
+ clear_bit(BNAD_RXQ_POST_OK, &ccb->rcb[1]->flags);
+ }
+}
+
+static void
bnad_cb_rx_cleanup(struct bnad *bnad, struct bna_rx *rx)
{
struct bnad_rx_info *rx_info = (struct bnad_rx_info *)rx->priv;
@@ -1009,6 +1030,7 @@ bnad_cb_rx_post(struct bnad *bnad, struct bna_rx *rx)
bnad_free_all_rxbufs(bnad, rcb);
set_bit(BNAD_RXQ_STARTED, &rcb->flags);
+ set_bit(BNAD_RXQ_POST_OK, &rcb->flags);
unmap_q = rcb->unmap_q;
/* Now allocate & post buffers for this RCB */
@@ -1898,6 +1920,7 @@ bnad_setup_rx(struct bnad *bnad, u32 rx_id)
.rcb_destroy_cbfn = bnad_cb_rcb_destroy,
.ccb_setup_cbfn = bnad_cb_ccb_setup,
.ccb_destroy_cbfn = bnad_cb_ccb_destroy,
+ .rx_stall_cbfn = bnad_cb_rx_stall,
.rx_cleanup_cbfn = bnad_cb_rx_cleanup,
.rx_post_cbfn = bnad_cb_rx_post,
};
diff --git a/drivers/net/ethernet/brocade/bna/bnad.h b/drivers/net/ethernet/brocade/bna/bnad.h
index 1c9328d..50fb36a 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.h
+++ b/drivers/net/ethernet/brocade/bna/bnad.h
@@ -103,6 +103,7 @@ struct bnad_rx_ctrl {
/* Bit positions for rcb->flags */
#define BNAD_RXQ_REFILL 0
#define BNAD_RXQ_STARTED 1
+#define BNAD_RXQ_POST_OK 2
/* Resource limits */
#define BNAD_NUM_TXQ (bnad->num_tx * bnad->num_txq_per_tx)
--
1.7.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [net-next 7/7] bna: Driver Version changed to 3.0.2.2
2011-09-27 20:39 [net-next 0/7] bna: H/W enablement and update driver version to 3.0.2.2 Rasesh Mody
` (5 preceding siblings ...)
2011-09-27 20:39 ` [net-next 6/7] bna: Add Callback to Fix RXQ Stop Rasesh Mody
@ 2011-09-27 20:39 ` Rasesh Mody
2011-09-28 6:59 ` [net-next 0/7] bna: H/W enablement and update driver version " David Miller
7 siblings, 0 replies; 12+ messages in thread
From: Rasesh Mody @ 2011-09-27 20:39 UTC (permalink / raw)
To: davem, netdev; +Cc: adapter_linux_open_src_team, Rasesh Mody, Gurunatha Karaje
Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/ethernet/brocade/bna/bnad.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bnad.h b/drivers/net/ethernet/brocade/bna/bnad.h
index 50fb36a..5487ca4 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.h
+++ b/drivers/net/ethernet/brocade/bna/bnad.h
@@ -71,7 +71,7 @@ struct bnad_rx_ctrl {
#define BNAD_NAME "bna"
#define BNAD_NAME_LEN 64
-#define BNAD_VERSION "3.0.2.1"
+#define BNAD_VERSION "3.0.2.2"
#define BNAD_MAILBOX_MSIX_INDEX 0
#define BNAD_MAILBOX_MSIX_VECTORS 1
--
1.7.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [net-next 0/7] bna: H/W enablement and update driver version to 3.0.2.2
2011-09-27 20:39 [net-next 0/7] bna: H/W enablement and update driver version to 3.0.2.2 Rasesh Mody
` (6 preceding siblings ...)
2011-09-27 20:39 ` [net-next 7/7] bna: Driver Version changed to 3.0.2.2 Rasesh Mody
@ 2011-09-28 6:59 ` David Miller
7 siblings, 0 replies; 12+ messages in thread
From: David Miller @ 2011-09-28 6:59 UTC (permalink / raw)
To: rmody; +Cc: netdev, adapter_linux_open_src_team
From: Rasesh Mody <rmody@brocade.com>
Date: Tue, 27 Sep 2011 13:39:04 -0700
> Hi Dave,
>
> The following series is re-submitted. These patches add support for
> Brocade-1860 Fabric Adapter and address the comments received from
> upstream community.
>
> It updates the Brocade BNA driver to v3.0.2.2.
>
> The driver has been compiled & tested against net-next-2.6(3.0.0-rc7).
All applied, thanks.
^ permalink raw reply [flat|nested] 12+ messages in thread