* [PATCH 2/2] pch_gbe: Fixed the issue on which a network freezes
2011-09-26 7:27 [PATCH 1/2] pch_gbe: Fixed the issue on which PC was frozen when link was downed Toshiharu Okada
@ 2011-09-26 7:27 ` Toshiharu Okada
2011-10-03 18:25 ` David Miller
2011-10-03 18:25 ` [PATCH 1/2] pch_gbe: Fixed the issue on which PC was frozen when link was downed David Miller
1 sibling, 1 reply; 4+ messages in thread
From: Toshiharu Okada @ 2011-09-26 7:27 UTC (permalink / raw)
To: netdev, linux-kernel, eric.dumazet, davem
Cc: qi.wang, yong.y.wang, joel.clark, kok.howg.ewe, tomoya-linux,
Toshiharu Okada
The pch_gbe driver has an issue which a network stops,
when receiving traffic is high.
In the case, The link down and up are necessary to return a network.
This patch fixed this issue.
Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
---
drivers/net/pch_gbe/pch_gbe_main.c | 56 +++++++++++++++++------------------
1 files changed, 27 insertions(+), 29 deletions(-)
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c
index 5474189..b8b4ba2 100644
--- a/drivers/net/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/pch_gbe/pch_gbe_main.c
@@ -1199,6 +1199,8 @@ static irqreturn_t pch_gbe_intr(int irq, void *data)
iowrite32((int_en & ~PCH_GBE_INT_RX_FIFO_ERR),
&hw->reg->INT_EN);
pch_gbe_stop_receive(adapter);
+ int_st |= ioread32(&hw->reg->INT_ST);
+ int_st = int_st & ioread32(&hw->reg->INT_EN);
}
if (int_st & PCH_GBE_INT_RX_DMA_ERR)
adapter->stats.intr_rx_dma_err_count++;
@@ -1218,14 +1220,11 @@ static irqreturn_t pch_gbe_intr(int irq, void *data)
/* Set Pause packet */
pch_gbe_mac_set_pause_packet(hw);
}
- if ((int_en & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT))
- == 0) {
- return IRQ_HANDLED;
- }
}
/* When request status is Receive interruption */
- if ((int_st & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT))) {
+ if ((int_st & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT)) ||
+ (adapter->rx_stop_flag == true)) {
if (likely(napi_schedule_prep(&adapter->napi))) {
/* Enable only Rx Descriptor empty */
atomic_inc(&adapter->irq_sem);
@@ -1385,7 +1384,7 @@ pch_gbe_clean_tx(struct pch_gbe_adapter *adapter,
struct sk_buff *skb;
unsigned int i;
unsigned int cleaned_count = 0;
- bool cleaned = false;
+ bool cleaned = true;
pr_debug("next_to_clean : %d\n", tx_ring->next_to_clean);
@@ -1396,7 +1395,6 @@ pch_gbe_clean_tx(struct pch_gbe_adapter *adapter,
while ((tx_desc->gbec_status & DSC_INIT16) == 0x0000) {
pr_debug("gbec_status:0x%04x\n", tx_desc->gbec_status);
- cleaned = true;
buffer_info = &tx_ring->buffer_info[i];
skb = buffer_info->skb;
@@ -1439,8 +1437,10 @@ pch_gbe_clean_tx(struct pch_gbe_adapter *adapter,
tx_desc = PCH_GBE_TX_DESC(*tx_ring, i);
/* weight of a sort for tx, to avoid endless transmit cleanup */
- if (cleaned_count++ == PCH_GBE_TX_WEIGHT)
+ if (cleaned_count++ == PCH_GBE_TX_WEIGHT) {
+ cleaned = false;
break;
+ }
}
pr_debug("called pch_gbe_unmap_and_free_tx_resource() %d count\n",
cleaned_count);
@@ -2168,7 +2168,6 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget)
{
struct pch_gbe_adapter *adapter =
container_of(napi, struct pch_gbe_adapter, napi);
- struct net_device *netdev = adapter->netdev;
int work_done = 0;
bool poll_end_flag = false;
bool cleaned = false;
@@ -2176,33 +2175,32 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget)
pr_debug("budget : %d\n", budget);
- /* Keep link state information with original netdev */
- if (!netif_carrier_ok(netdev)) {
+ pch_gbe_clean_rx(adapter, adapter->rx_ring, &work_done, budget);
+ cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring);
+
+ if (!cleaned)
+ work_done = budget;
+ /* If no Tx and not enough Rx work done,
+ * exit the polling mode
+ */
+ if (work_done < budget)
poll_end_flag = true;
- } else {
- pch_gbe_clean_rx(adapter, adapter->rx_ring, &work_done, budget);
+
+ if (poll_end_flag) {
+ napi_complete(napi);
+ if (adapter->rx_stop_flag) {
+ adapter->rx_stop_flag = false;
+ pch_gbe_start_receive(&adapter->hw);
+ }
+ pch_gbe_irq_enable(adapter);
+ } else
if (adapter->rx_stop_flag) {
adapter->rx_stop_flag = false;
pch_gbe_start_receive(&adapter->hw);
int_en = ioread32(&adapter->hw.reg->INT_EN);
iowrite32((int_en | PCH_GBE_INT_RX_FIFO_ERR),
- &adapter->hw.reg->INT_EN);
+ &adapter->hw.reg->INT_EN);
}
- cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring);
-
- if (cleaned)
- work_done = budget;
- /* If no Tx and not enough Rx work done,
- * exit the polling mode
- */
- if (work_done < budget)
- poll_end_flag = true;
- }
-
- if (poll_end_flag) {
- napi_complete(napi);
- pch_gbe_irq_enable(adapter);
- }
pr_debug("poll_end_flag : %d work_done : %d budget : %d\n",
poll_end_flag, work_done, budget);
--
1.7.4.4
^ permalink raw reply related [flat|nested] 4+ messages in thread