From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hiroaki SHIMODA Subject: Re: [PATCH net-next] tg3: Fix advertisement handling Date: Tue, 22 Nov 2011 07:40:30 +0900 Message-ID: <20111122074030.ac247a36.shimoda.hiroaki@gmail.com> References: <20111121080720.0e68f096.shimoda.hiroaki@gmail.com> <20111121192908.GA1198@mcarlson.broadcom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: davem@davemloft.net, mchan@broadcom.com, eric.dumazet@gmail.com, netdev@vger.kernel.org To: mcarlson@broadcom.com Return-path: Received: from mail-vw0-f46.google.com ([209.85.212.46]:48923 "EHLO mail-vw0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750904Ab1KUWkf (ORCPT ); Mon, 21 Nov 2011 17:40:35 -0500 Received: by vbbfc21 with SMTP id fc21so3099086vbb.19 for ; Mon, 21 Nov 2011 14:40:34 -0800 (PST) In-Reply-To: <20111121192908.GA1198@mcarlson.broadcom.com> Sender: netdev-owner@vger.kernel.org List-ID: On Mon, 21 Nov 2011 11:29:08 -0800 "Matt Carlson" wrote: > On Sun, Nov 20, 2011 at 03:07:20PM -0800, Hiroaki SHIMODA wrote: > > Commit 28011cf19b (net: Add ethtool to mii advertisment conversion > > helpers) added a helper function ethtool_adv_to_mii_100bt() and > > tg3_copper_is_advertising_all(), tg3_phy_autoneg_cfg() were > > modified to use this. > > Before that commit, ethtool to mii advertisement conversion was > > done wrt speed, but now pause operation is also taken account. > > So, in tg3_copper_is_advertising_all(), below condition becomes > > true and this makes link up fails. > > > > if ((adv_reg & ADVERTISE_ALL) != all_mask) > > return 0; > > > > To fix this add ADVERTISE_ALL bit and operation to cap speed. > > > > Signed-off-by: Hiroaki SHIMODA > > The root cause of this problem can actually be fixed by the following > patch: > > diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c > index 024ca1d..53e501c 100644 > --- a/drivers/net/ethernet/broadcom/tg3.c > +++ b/drivers/net/ethernet/broadcom/tg3.c > @@ -13192,8 +13192,7 @@ static u32 __devinit tg3_read_otp_phycfg(struct tg3 *tp) > > static void __devinit tg3_phy_init_link_config(struct tg3 *tp) > { > - u32 adv = ADVERTISED_Autoneg | > - ADVERTISED_Pause; > + u32 adv = ADVERTISED_Autoneg; > > if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY)) > adv |= ADVERTISED_1000baseT_Half | > > Could you add it as part of this patch? Ok. > > Technically the above patch should fix the problem, but this patch makes > the code clearer, should the same type of error pop up in the future. > > More comments below. > > > --- > > drivers/net/ethernet/broadcom/tg3.c | 4 ++-- > > 1 files changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c > > index 024ca1d..c00e648 100644 > > --- a/drivers/net/ethernet/broadcom/tg3.c > > +++ b/drivers/net/ethernet/broadcom/tg3.c > > @@ -3594,7 +3594,7 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl) > > u32 val, new_adv; > > > > new_adv = ADVERTISE_CSMA; > > - new_adv |= ethtool_adv_to_mii_100bt(advertise); > > + new_adv |= ethtool_adv_to_mii_100bt(advertise) & ADVERTISE_ALL; > > new_adv |= tg3_advert_flowctrl_1000T(flowctrl); > > > > err = tg3_writephy(tp, MII_ADVERTISE, new_adv); > > @@ -3783,7 +3783,7 @@ static int tg3_copper_is_advertising_all(struct tg3 *tp, u32 mask) > > if (tg3_readphy(tp, MII_ADVERTISE, &adv_reg)) > > return 0; > > > > - if ((adv_reg & ADVERTISE_ALL) != all_mask) > > + if ((adv_reg & ADVERTISE_ALL) != (all_mask & ADVERTISE_ALL)) > > Rather than ANDing the all_mask here, can you make it look like the 1st > hunk of your patch by ANDing the value returned by > ethtool_adv_to_mii_100bt()? I plan on further changes in this area and > the uniformity will help. Ok. I'll send V2 with Eric's Reported-by tag. Thanks. > > > return 0; > > > > if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY)) { > > >