From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean-Christophe PLAGNIOL-VILLARD Subject: Re: [PATCH] ARM: at91/net: add macb ethernet controller in 9g45 DT Date: Sat, 3 Dec 2011 06:56:59 +0100 Message-ID: <20111203055659.GL18533@game.jcrosoft.org> References: <1322847782-22650-1-git-send-email-nicolas.ferre@atmel.com> <1322848237-23154-1-git-send-email-nicolas.ferre@atmel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: netdev@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, linux-kernel@vger.kernel.org, grant.likely@secretlab.ca, jamie@jamieiles.com, linux-arm-kernel@lists.infradead.org To: Nicolas Ferre Return-path: Content-Disposition: inline In-Reply-To: <1322848237-23154-1-git-send-email-nicolas.ferre@atmel.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org List-Id: netdev.vger.kernel.org On 18:50 Fri 02 Dec , Nicolas Ferre wrote: > Add the Cadence macb ethernet controller in at91sam9g45 .dtsi and > enable it in at91sam9m10g45ek board device tree file. > > Signed-off-by: Nicolas Ferre > --- > arch/arm/boot/dts/at91sam9g45.dtsi | 7 +++++++ > arch/arm/boot/dts/at91sam9m10g45ek.dts | 6 ++++++ > 2 files changed, 13 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi > index e89b1d7..67f94d3 100644 > --- a/arch/arm/boot/dts/at91sam9g45.dtsi > +++ b/arch/arm/boot/dts/at91sam9g45.dtsi > @@ -101,6 +101,13 @@ > atmel,use-dma-tx; > status = "disabled"; > }; > + > + macb0: ethernet@fffbc000 { > + compatible = "cdns,at32ap7000-macb", "cdns,macb"; > + reg = <0xfffbc000 0x100>; > + interrupts = <25 4>; why? > + status = "disabled"; > + }; > }; > }; > }; > diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts > index 85b34f5..17377a2 100644 > --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts > +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts > @@ -30,6 +30,12 @@ > usart1: serial@fff90000 { > status = "okay"; > }; > + > + macb0: ethernet@fffbc000 { > + local-mac-address = [3a 0e 03 04 05 06]; please drop this is not supposed to be in the dts but updated for each board Best Regards, J.