* [PATCH V2 2/4] CS89x0 : add CS89x0 platform device to the iMX21ADS board
@ 2012-01-10 23:14 Jaccon Bastiaansen
2012-01-11 8:12 ` Uwe Kleine-König
0 siblings, 1 reply; 2+ messages in thread
From: Jaccon Bastiaansen @ 2012-01-10 23:14 UTC (permalink / raw)
To: jaccon.bastiaansen, s.hauer, kernel, u.kleine-koenig, davem,
cavokz
Cc: linux-arm-kernel, netdev
Add CS89x0 networking support to the iMX21ADS board by using the
platform driver support in the CS89x0 driver.
Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com>
---
arch/arm/configs/imx_v4_v5_defconfig | 2 ++
arch/arm/mach-imx/mach-mx21ads.c | 25 ++++++++++++++++++++++---
2 files changed, 24 insertions(+), 3 deletions(-)
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 11a4192..fc0106f 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -81,6 +81,8 @@ CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
CONFIG_DM9000=y
CONFIG_SMC911X=y
+CONFIG_CS89x0=y
+CONFIG_CS89x0_PLATFORM=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV is not set
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 25f8402..faefdf8 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -38,7 +38,6 @@
(MX21ADS_MMIO_BASE_ADDR + (offset))
#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
-#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000)
#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
@@ -159,6 +158,26 @@ static struct platform_device mx21ads_nor_mtd_device = {
.resource = &mx21ads_flash_resource,
};
+static struct resource mx21ads_cs8900_resources[] = {
+ {
+ .start = MX21_CS1_BASE_ADDR,
+ .end = MX21_CS1_BASE_ADDR + 0x200000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MX21ADS_CS8900A_IRQ,
+ .end = MX21ADS_CS8900A_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device mx21ads_cs8900_device = {
+ .name = "cs89x0",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mx21ads_cs8900_resources),
+ .resource = mx21ads_cs8900_resources
+};
+
static const struct imxuart_platform_data uart_pdata_rts __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -254,14 +273,13 @@ mx21ads_nand_board_info __initconst = {
static struct map_desc mx21ads_io_desc[] __initdata = {
/*
* Memory-mapped I/O on MX21ADS Base board:
- * - CS8900A Ethernet controller
* - ST16C2552CJ UART
* - CPU and Base board version
* - Base board I/O register
*/
{
.virtual = MX21ADS_MMIO_BASE_ADDR,
- .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
+ .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR + 0x200000),
.length = MX21ADS_MMIO_SIZE,
.type = MT_DEVICE,
},
@@ -275,6 +293,7 @@ static void __init mx21ads_map_io(void)
static struct platform_device *platform_devices[] __initdata = {
&mx21ads_nor_mtd_device,
+ &mx21ads_cs8900_device,
};
static void __init mx21ads_board_init(void)
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH V2 2/4] CS89x0 : add CS89x0 platform device to the iMX21ADS board
2012-01-10 23:14 [PATCH V2 2/4] CS89x0 : add CS89x0 platform device to the iMX21ADS board Jaccon Bastiaansen
@ 2012-01-11 8:12 ` Uwe Kleine-König
0 siblings, 0 replies; 2+ messages in thread
From: Uwe Kleine-König @ 2012-01-11 8:12 UTC (permalink / raw)
To: Jaccon Bastiaansen
Cc: s.hauer, kernel, davem, cavokz, netdev, linux-arm-kernel
Hello,
On Wed, Jan 11, 2012 at 12:14:15AM +0100, Jaccon Bastiaansen wrote:
> Add CS89x0 networking support to the iMX21ADS board by using the
> platform driver support in the CS89x0 driver.
>
> Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com>
> ---
> arch/arm/configs/imx_v4_v5_defconfig | 2 ++
> arch/arm/mach-imx/mach-mx21ads.c | 25 ++++++++++++++++++++++---
> 2 files changed, 24 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
> index 11a4192..fc0106f 100644
> --- a/arch/arm/configs/imx_v4_v5_defconfig
> +++ b/arch/arm/configs/imx_v4_v5_defconfig
> @@ -81,6 +81,8 @@ CONFIG_NET_ETHERNET=y
> CONFIG_SMC91X=y
> CONFIG_DM9000=y
> CONFIG_SMC911X=y
> +CONFIG_CS89x0=y
> +CONFIG_CS89x0_PLATFORM=y
> # CONFIG_NETDEV_1000 is not set
> # CONFIG_NETDEV_10000 is not set
> # CONFIG_INPUT_MOUSEDEV is not set
> diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
> index 25f8402..faefdf8 100644
> --- a/arch/arm/mach-imx/mach-mx21ads.c
> +++ b/arch/arm/mach-imx/mach-mx21ads.c
> @@ -38,7 +38,6 @@
> (MX21ADS_MMIO_BASE_ADDR + (offset))
>
> #define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
> -#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000)
> #define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
> #define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
> #define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
> @@ -159,6 +158,26 @@ static struct platform_device mx21ads_nor_mtd_device = {
> .resource = &mx21ads_flash_resource,
> };
>
> +static struct resource mx21ads_cs8900_resources[] = {
> + {
> + .start = MX21_CS1_BASE_ADDR,
> + .end = MX21_CS1_BASE_ADDR + 0x200000 - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .start = MX21ADS_CS8900A_IRQ,
> + .end = MX21ADS_CS8900A_IRQ,
> + .flags = IORESOURCE_IRQ,
> + }
> +};
> +
> +static struct platform_device mx21ads_cs8900_device = {
> + .name = "cs89x0",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(mx21ads_cs8900_resources),
> + .resource = mx21ads_cs8900_resources
> +};
> +
Nowadays we prefer dynamic initialisation over static structs. (A struct
platform_device takes 300 and a few bytes IIRC and just occupies memory
if you boot a machine different from mx21ads.) So the right incantation
is:
static const struct resource mx21ads_cs8900_resources[] __initconst = {
...
};
static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = {
.name = "cs89x0",
.id = 0;
.res = mx21ads_cs8900_resources,
.num_res = ARRAY_SIZE(mx21ads_cs8900_resources),
};
platform_device_register_full(&mx21ads_cs8900_devinfo);
> static const struct imxuart_platform_data uart_pdata_rts __initconst = {
> .flags = IMXUART_HAVE_RTSCTS,
> };
> @@ -254,14 +273,13 @@ mx21ads_nand_board_info __initconst = {
> static struct map_desc mx21ads_io_desc[] __initdata = {
> /*
> * Memory-mapped I/O on MX21ADS Base board:
> - * - CS8900A Ethernet controller
> * - ST16C2552CJ UART
> * - CPU and Base board version
> * - Base board I/O register
> */
> {
> .virtual = MX21ADS_MMIO_BASE_ADDR,
> - .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
> + .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR + 0x200000),
> .length = MX21ADS_MMIO_SIZE,
> .type = MT_DEVICE,
> },
Maybe add a comment here why an offset is used here and maybe use a
nice #define for it instead of a bare number.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-01-11 8:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-01-10 23:14 [PATCH V2 2/4] CS89x0 : add CS89x0 platform device to the iMX21ADS board Jaccon Bastiaansen
2012-01-11 8:12 ` Uwe Kleine-König
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).