From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Zhenzhong Duan <zhenzhong.duan@oracle.com>,
Ian Campbell <Ian.Campbell@eu.citrix.com>
Cc: xen-devel@lists.xensource.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, gurudas.pai@oracle.com,
"Tina.Yang" <tina.yang@oracle.com>,
Jeremy Fitzhardinge <jeremy@goop.org>
Subject: Re: [PATCH] add netconsole support for xen-netfront
Date: Thu, 12 Jan 2012 06:17:45 -0800 (PST) [thread overview]
Message-ID: <20120112141745.GA7685@phenom.dumpdata.com> (raw)
In-Reply-To: <1326271956-25565-1-git-send-email-zhenzhong.duan@oracle.com>
On Wed, Jan 11, 2012 at 04:52:36PM +0800, Zhenzhong Duan wrote:
> add polling interface to xen-netfront device to support netconsole
>
Ian, any thoughts on the spinlock changes?
> Signed-off-by: Tina.Yang <tina.yang@oracle.com>
> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> Cc: Jeremy Fitzhardinge <jeremy@goop.org>
> Signed-off-by: Zhenzhong.Duan <zhenzhong.duan@oracle.com>
> Tested-by: gurudas.pai <gurudas.pai@oracle.com>
> ---
> drivers/net/xen-netfront.c | 57 ++++++++++++++++++++++++++-----------------
> 1 files changed, 34 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
> index fa67905..db638b4 100644
> --- a/drivers/net/xen-netfront.c
> +++ b/drivers/net/xen-netfront.c
> @@ -489,6 +489,7 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
> int frags = skb_shinfo(skb)->nr_frags;
> unsigned int offset = offset_in_page(data);
> unsigned int len = skb_headlen(skb);
> + unsigned long flags;
>
> frags += DIV_ROUND_UP(offset + len, PAGE_SIZE);
> if (unlikely(frags > MAX_SKB_FRAGS + 1)) {
> @@ -498,12 +499,12 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
> goto drop;
> }
>
> - spin_lock_irq(&np->tx_lock);
> + spin_lock_irqsave(&np->tx_lock, flags);
>
> if (unlikely(!netif_carrier_ok(dev) ||
> (frags > 1 && !xennet_can_sg(dev)) ||
> netif_needs_gso(skb, netif_skb_features(skb)))) {
> - spin_unlock_irq(&np->tx_lock);
> + spin_unlock_irqrestore(&np->tx_lock, flags);
> goto drop;
> }
>
> @@ -574,7 +575,7 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
> if (!netfront_tx_slot_available(np))
> netif_stop_queue(dev);
>
> - spin_unlock_irq(&np->tx_lock);
> + spin_unlock_irqrestore(&np->tx_lock, flags);
>
> return NETDEV_TX_OK;
>
> @@ -1228,6 +1229,33 @@ static int xennet_set_features(struct net_device *dev,
> return 0;
> }
>
> +static irqreturn_t xennet_interrupt(int irq, void *dev_id)
> +{
> + struct net_device *dev = dev_id;
> + struct netfront_info *np = netdev_priv(dev);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&np->tx_lock, flags);
> +
> + if (likely(netif_carrier_ok(dev))) {
> + xennet_tx_buf_gc(dev);
> + /* Under tx_lock: protects access to rx shared-ring indexes. */
> + if (RING_HAS_UNCONSUMED_RESPONSES(&np->rx))
> + napi_schedule(&np->napi);
> + }
> +
> + spin_unlock_irqrestore(&np->tx_lock, flags);
> +
> + return IRQ_HANDLED;
> +}
> +
> +#ifdef CONFIG_NET_POLL_CONTROLLER
> +static void xennet_poll_controller(struct net_device *dev)
> +{
> + xennet_interrupt(0, dev);
> +}
> +#endif
> +
> static const struct net_device_ops xennet_netdev_ops = {
> .ndo_open = xennet_open,
> .ndo_uninit = xennet_uninit,
> @@ -1239,6 +1267,9 @@ static const struct net_device_ops xennet_netdev_ops = {
> .ndo_validate_addr = eth_validate_addr,
> .ndo_fix_features = xennet_fix_features,
> .ndo_set_features = xennet_set_features,
> +#ifdef CONFIG_NET_POLL_CONTROLLER
> + .ndo_poll_controller = xennet_poll_controller,
> +#endif
> };
>
> static struct net_device * __devinit xennet_create_dev(struct xenbus_device *dev)
> @@ -1448,26 +1479,6 @@ static int xen_net_read_mac(struct xenbus_device *dev, u8 mac[])
> return 0;
> }
>
> -static irqreturn_t xennet_interrupt(int irq, void *dev_id)
> -{
> - struct net_device *dev = dev_id;
> - struct netfront_info *np = netdev_priv(dev);
> - unsigned long flags;
> -
> - spin_lock_irqsave(&np->tx_lock, flags);
> -
> - if (likely(netif_carrier_ok(dev))) {
> - xennet_tx_buf_gc(dev);
> - /* Under tx_lock: protects access to rx shared-ring indexes. */
> - if (RING_HAS_UNCONSUMED_RESPONSES(&np->rx))
> - napi_schedule(&np->napi);
> - }
> -
> - spin_unlock_irqrestore(&np->tx_lock, flags);
> -
> - return IRQ_HANDLED;
> -}
> -
> static int setup_netfront(struct xenbus_device *dev, struct netfront_info *info)
> {
> struct xen_netif_tx_sring *txs;
> --
> 1.7.3
next parent reply other threads:[~2012-01-12 14:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1326271956-25565-1-git-send-email-zhenzhong.duan@oracle.com>
2012-01-12 14:17 ` Konrad Rzeszutek Wilk [this message]
2012-01-13 11:06 ` [PATCH] add netconsole support for xen-netfront Ian Campbell
2012-01-17 21:42 ` Tina Yang
2012-01-17 21:51 ` Konrad Rzeszutek Wilk
2012-01-17 23:15 ` Tina Yang
2012-01-18 8:59 ` Ian Campbell
2012-01-18 21:06 ` Tina Yang
2012-01-23 18:24 ` Konrad Rzeszutek Wilk
2012-01-24 8:58 ` Ian Campbell
2012-01-25 4:00 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120112141745.GA7685@phenom.dumpdata.com \
--to=konrad.wilk@oracle.com \
--cc=Ian.Campbell@eu.citrix.com \
--cc=gurudas.pai@oracle.com \
--cc=jeremy@goop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=tina.yang@oracle.com \
--cc=xen-devel@lists.xensource.com \
--cc=zhenzhong.duan@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).