brcm80211 breakage..

brcm80211 breakage..

[Linus Torvalds]

So the wireless on my Macbook Air no longer seems to work with the
current -git tree.

The BRCMSMAC driver *used* to work, and no longer does. Also, very
annoyingly, it's even hard to *compile* the thing, because it used to
be

  depends on BCMA=n

but now it is the exact reverse:

  depends on BCMA

so there is no sane way to carry a configuration over from before, and
things like bisection is a major pain due to having to play idiotic
configuration games to get it to work across all these modifications.

Ragardless, even once you actually enable BCMA and can get the driver
to come back, it just doesn't do anything. Maybe there is some
remaining config problem, but I don't think so. I think the driver is
just buggered.

The kernel messages don't say much. A working config for me has
messages like this:

  brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 11
  brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  brcmsmac 0000:02:00.0: setting latency timer to 64
  ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
  ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
  ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
  ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
  ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
  ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled
true, count 0 (implement)
  ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled
true, count 1 (implement)

while the nonworking one says:

  brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17
  ieee80211 phy0: wl0: brcms_b_attach: si_attach failed
  ieee80211 phy0: wl0: brcms_b_attach: failed with err 11
  ieee80211 phy0: wl0: brcms_c_attach: failed with err 11
  ieee80211 phy0: brcmsmac: attach() failed with code 11
  brcmsmac: brcms_bcma_probe: brcms_attach failed!
  brcms_module_init: register returned 0

and no wireless device ever shows up.

lspci for this device says:

  02:00.0 Network controller: Broadcom Corporation BCM43224
802.11a/b/g/n (rev 01)
          Subsystem: Apple Computer Inc. Device 00e9
          Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
          Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
          Latency: 0, Cache Line Size: 256 bytes
          Interrupt: pin A routed to IRQ 17
          Region 0: Memory at a0400000 (64-bit, non-prefetchable) [size=16K]
          Capabilities: <access denied>
          Kernel driver in use: brcmsmac
  00: e4 14 53 43 06 00 10 00 01 00 80 02 40 00 00 00
  10: 04 00 40 a0 00 00 00 00 00 00 00 00 00 00 00 00
  20: 00 00 00 00 00 00 00 00 00 00 00 00 6b 10 e9 00
  30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00

(this is from the working kernel, obviously).

Please look into this. I'll obviously be happy test any reasonable suggestions,

                 Linus

Re: brcm80211 breakage..

[Arend van Spriel]

[-- Attachment #1: Type: text/plain, Size: 2032 bytes --]

On 01/10/2012 09:15 PM, Linus Torvalds wrote:
> So the wireless on my Macbook Air no longer seems to work with the
> current -git tree.
> 
> The BRCMSMAC driver *used* to work, and no longer does. Also, very
> annoyingly, it's even hard to *compile* the thing, because it used to
> be
> 
>   depends on BCMA=n
> 
> but now it is the exact reverse:
> 
>   depends on BCMA
> 
> so there is no sane way to carry a configuration over from before, and
> things like bisection is a major pain due to having to play idiotic
> configuration games to get it to work across all these modifications.

BCMA support has been added to brcmsmac so now we depend on it. As BCMA
claims the PCI device we had the BCMA=n in place before. I agree that it
makes bisecting a pain in the...

> Ragardless, even once you actually enable BCMA and can get the driver
> to come back, it just doesn't do anything. Maybe there is some
> remaining config problem, but I don't think so. I think the driver is
> just buggered.

Looking at the output I had deja-vu feeling. The issue popped up when we
published part of the patches for BCMA support. I looked into it with
Larry Finger and Rafał Miłecki. We found the reason for the failure, but
it seemed resolved after submitting the remaining patches for BCMA
support. However, it seems to have raised its ugly head.

> Please look into this. I'll obviously be happy test any reasonable suggestions,
> 
>                  Linus
> 

My theory is that the BAR window is not mapped to a valid address. Could
you try to revert the following commit:

commit 439678f8b0fca7aeca06c6581e3679eef618721a
Author: Rafał Miłecki <zajec5@gmail.com>
Date:   Mon Dec 5 19:13:39 2011 +0100

    bcma: pci: use fixed windows when possible

    Some cores are mapped in the fixed way, they registers can be accessed
    all the time.

    Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
    Signed-off-by: John W. Linville <linville@tuxdriver.com>

I have attached the 'revert patch' based on your git master branch.

Gr. AvS

[-- Attachment #2: 0001-Revert-bcma-pci-use-fixed-windows-when-possible.patch --]
[-- Type: text/plain, Size: 2737 bytes --]

>From 71e949a668bc8c371dc21f17af01284719f1b383 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Wed, 11 Jan 2012 11:35:05 +0100
Subject: [PATCH] Revert "bcma: pci: use fixed windows when possible"

This reverts commit 439678f8b0fca7aeca06c6581e3679eef618721a.
---
 drivers/bcma/host_pci.c |   32 +++++++++++---------------------
 1 files changed, 11 insertions(+), 21 deletions(-)

diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
index 443b83a..990f5a8 100644
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -21,58 +21,48 @@ static void bcma_host_pci_switch_core(struct bcma_device *core)
 	pr_debug("Switched to core: 0x%X\n", core->id.id);
 }
 
-/* Provides access to the requested core. Returns base offset that has to be
- * used. It makes use of fixed windows when possible. */
-static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core)
+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset)
 {
-	switch (core->id.id) {
-	case BCMA_CORE_CHIPCOMMON:
-		return 3 * BCMA_CORE_SIZE;
-	case BCMA_CORE_PCIE:
-		return 2 * BCMA_CORE_SIZE;
-	}
-
 	if (core->bus->mapped_core != core)
 		bcma_host_pci_switch_core(core);
-	return 0;
-}
-
-static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset)
-{
-	offset += bcma_host_pci_provide_access_to_core(core);
 	return ioread8(core->bus->mmio + offset);
 }
 
 static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset)
 {
-	offset += bcma_host_pci_provide_access_to_core(core);
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
 	return ioread16(core->bus->mmio + offset);
 }
 
 static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset)
 {
-	offset += bcma_host_pci_provide_access_to_core(core);
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
 	return ioread32(core->bus->mmio + offset);
 }
 
 static void bcma_host_pci_write8(struct bcma_device *core, u16 offset,
 				 u8 value)
 {
-	offset += bcma_host_pci_provide_access_to_core(core);
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
 	iowrite8(value, core->bus->mmio + offset);
 }
 
 static void bcma_host_pci_write16(struct bcma_device *core, u16 offset,
 				 u16 value)
 {
-	offset += bcma_host_pci_provide_access_to_core(core);
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
 	iowrite16(value, core->bus->mmio + offset);
 }
 
 static void bcma_host_pci_write32(struct bcma_device *core, u16 offset,
 				 u32 value)
 {
-	offset += bcma_host_pci_provide_access_to_core(core);
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
 	iowrite32(value, core->bus->mmio + offset);
 }
 
-- 
1.7.5.4

Re: brcm80211 breakage..

[Linus Torvalds]

On Wed, Jan 11, 2012 at 2:44 AM, Arend van Spriel <arend@broadcom.com> wrote:
>
> My theory is that the BAR window is not mapped to a valid address. Could
> you try to revert the following commit:

Sadly, that one makes no difference. I'll enable BRCM/BCMA debugging
and see if that gives any more information, but will be unable to do
much for the next few hours, so it will likely not be until this
afternoon.

                            Linus

Re: brcm80211 breakage..

[Linus Torvalds]

On Wed, Jan 11, 2012 at 7:05 AM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> Sadly, that one makes no difference. I'll enable BRCM/BCMA debugging
> and see if that gives any more information, but will be unable to do
> much for the next few hours, so it will likely not be until this
> afternoon.

Ok, could do it now. But that really doesn't give much more
information. Here it is anyway:

[    0.746530] bcma-pci-bridge 0000:02:00.0: PCI INT A -> GSI 17
(level, low) -> IRQ 17
[    0.746544] bcma-pci-bridge 0000:02:00.0: setting latency timer to 64
[    0.746617] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800,
rev 0x22, class 0x0)
[    0.746646] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812,
rev 0x17, class 0x0)
[    0.746709] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev
0x0F, class 0x0)
[    0.746845] bcma: Switched to core: 0x800
[    0.746859] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[    0.746880] bcma: Switched to core: 0x820
[    0.775510] bcma: Switched to core: 0x800
[    0.815750] bcma: Unsupported SPROM revision: 255
[    0.815804] bcma: No SPROM available
[    0.815909] bcma: Bus registered
[   41.797178] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17
[   41.952030] bcma: Switched to core: 0x820
[   41.952050] bcma: Switched to core: 0x800
[   41.953881] ieee80211 phy0: wl0: brcms_b_attach: si_attach failed
[   41.956397] ieee80211 phy0: wl0: brcms_b_attach: failed with err 11
[   41.958443] ieee80211 phy0: wl0: brcms_c_attach: failed with err 11
[   41.960468] ieee80211 phy0: brcmsmac: attach() failed with code 11
[   41.962316] brcmsmac: brcms_bcma_probe: brcms_attach failed!
[   41.967275] brcms_module_init: register returned 0

hopefully this gives people *some* idea, but I'm not seeing anything.

         Linus

Re: brcm80211 breakage..

[Larry Finger]

On 01/11/2012 10:04 AM, Linus Torvalds wrote:
> On Wed, Jan 11, 2012 at 7:05 AM, Linus Torvalds
>
> Ok, could do it now. But that really doesn't give much more
> information. Here it is anyway:
>
> [    0.746530] bcma-pci-bridge 0000:02:00.0: PCI INT A ->  GSI 17
> (level, low) ->  IRQ 17
> [    0.746544] bcma-pci-bridge 0000:02:00.0: setting latency timer to 64
> [    0.746617] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800,
> rev 0x22, class 0x0)
> [    0.746646] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812,
> rev 0x17, class 0x0)
> [    0.746709] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev
> 0x0F, class 0x0)
> [    0.746845] bcma: Switched to core: 0x800
> [    0.746859] bcma: Found rev 6 PMU (capabilities 0x108C2606)
> [    0.746880] bcma: Switched to core: 0x820
> [    0.775510] bcma: Switched to core: 0x800
> [    0.815750] bcma: Unsupported SPROM revision: 255
> [    0.815804] bcma: No SPROM available

I'm not a bcma or brcmsmac expert, but the above result of SPROM version 0xFF 
looks as if the read was from a non-existent register. If you get a chance, 
please try this patch, which will dump the offset that is being used.

Index: wireless-testing-new/drivers/bcma/sprom.c
===================================================================
--- wireless-testing-new.orig/drivers/bcma/sprom.c
+++ wireless-testing-new/drivers/bcma/sprom.c
@@ -230,6 +230,7 @@ int bcma_sprom_get(struct bcma_bus *bus)
  	 * TODO: understand this condition and use it */
  	offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
  		BCMA_CC_SPROM_PCIE6;
+	pr_debug("SPROM offset 0x%x\n", offset);
  	bcma_sprom_read(bus, offset, sprom);

  	if (bus->chipinfo.id == 0x4331)

As the TODO indicates, this part is not understood.

One other thing to try. If the new output says that the offset is 0x830, try 
forcing it to 0x800, or vice versa. I don't think you have a 4331, and I expect 
that the current code is trying 0x830, but should be using 0x800.

Larry

Re: brcm80211 breakage..

[Ben Hutchings]

On Wed, 2012-01-11 at 11:44 +0100, Arend van Spriel wrote:
> On 01/10/2012 09:15 PM, Linus Torvalds wrote:
> > So the wireless on my Macbook Air no longer seems to work with the
> > current -git tree.
> > 
> > The BRCMSMAC driver *used* to work, and no longer does. Also, very
> > annoyingly, it's even hard to *compile* the thing, because it used to
> > be
> > 
> >   depends on BCMA=n
> > 
> > but now it is the exact reverse:
> > 
> >   depends on BCMA
> > 
> > so there is no sane way to carry a configuration over from before, and
> > things like bisection is a major pain due to having to play idiotic
> > configuration games to get it to work across all these modifications.
> 
> BCMA support has been added to brcmsmac so now we depend on it. As BCMA
> claims the PCI device we had the BCMA=n in place before. I agree that it
> makes bisecting a pain in the...
[...]

Maybe BRCMSMAC should select BCMA rather than depending on it.  This bus
seems like kind of an implementation detail that people are unlikely to
be aware of, unlike say PCI.

Ben.

-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: brcm80211 breakage..

[Arend van Spriel]

On 01/11/2012 05:04 PM, Linus Torvalds wrote:
> On Wed, Jan 11, 2012 at 7:05 AM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
>>
>> Sadly, that one makes no difference. I'll enable BRCM/BCMA debugging
>> and see if that gives any more information, but will be unable to do
>> much for the next few hours, so it will likely not be until this
>> afternoon.

There goes my theory. I have no MacBook Air over here and we have
nightly testing running for this chip. I will have it run on your branch
iso wireless to see if I can reproduce it over here.

> Ok, could do it now. But that really doesn't give much more
> information. Here it is anyway:
> [   41.797178] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17
> [   41.952030] bcma: Switched to core: 0x820
> [   41.952050] bcma: Switched to core: 0x800
> [   41.953881] ieee80211 phy0: wl0: brcms_b_attach: si_attach failed
> [   41.956397] ieee80211 phy0: wl0: brcms_b_attach: failed with err 11
> [   41.958443] ieee80211 phy0: wl0: brcms_c_attach: failed with err 11
> [   41.960468] ieee80211 phy0: brcmsmac: attach() failed with code 11
> [   41.962316] brcmsmac: brcms_bcma_probe: brcms_attach failed!
> [   41.967275] brcms_module_init: register returned 0
> 
> hopefully this gives people *some* idea, but I'm not seeing anything.
> 
>          Linus
> 

I have some idea, but no success in reproducing it. Could you provide
the .config used on this?

Gr. AvS

Re: brcm80211 breakage..

[Linus Torvalds]

[-- Attachment #1: Type: text/plain, Size: 398 bytes --]

2012/1/11 Arend van Spriel <arend@broadcom.com>:
>
> I have some idea, but no success in reproducing it. Could you provide
> the .config used on this?

Attached.

I'm also attaching the lspci output from a working configuration and a
nonworking one. The only thing that stands out is the ">TAbort+" in
the status of the broken one. Some transfer has gone wrong, it looks
like.

              Linus

[-- Attachment #2: kernel-config --]
[-- Type: application/octet-stream, Size: 82410 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.2.0 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_CMPXCHG_DOUBLE=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=16
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_FTP=y
# CONFIG_NF_CONNTRACK_IRC is not set
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_RAW=y

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
# CONFIG_IP6_NF_MANGLE is not set
CONFIG_IP6_NF_RAW=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
CONFIG_HAVE_BPF_JIT=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_DMA_SHARED_BUFFER is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_RAID is not set
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
CONFIG_MII=y
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_ZNET is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_SEEQ=y
# CONFIG_SEEQ8005 is not set
# CONFIG_NET_VENDOR_SILAN is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
# CONFIG_SFC is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
# CONFIG_BRCMFMAC is not set
# CONFIG_BRCMDBG is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL1251 is not set
# CONFIG_WL12XX_MENU is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_APPLESMC=y

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_CORE is not set
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y

#
# Audio decoders, processors and mixers
#

#
# RDS decoders
#

#
# Video decoders
#

#
# Video and audio decoders
#

#
# MPEG video encoders
#

#
# Video encoders
#

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#

#
# Miscelaneous helper chips
#
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
CONFIG_BACKLIGHT_APPLE=y
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_MV is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I7CORE is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
# CONFIG_EDAC_SBRIDGE is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_RTS_PSTOR is not set
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_POHMELFS is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_DRM_NOUVEAU is not set

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_VME_BUS is not set
# CONFIG_DX_SEP is not set
# CONFIG_IIO is not set
# CONFIG_XVMALLOC is not set
# CONFIG_ZRAM is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_PANASONIC_LAPTOP is not set
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
CONFIG_THINKPAD_ACPI_DEBUG=y
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
# CONFIG_THINKPAD_ACPI_VIDEO is not set
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WMI is not set
CONFIG_ACPI_WMI=y
# CONFIG_MSI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
CONFIG_INTEL_IPS=y
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_MXM_WMI is not set
# CONFIG_SAMSUNG_Q10 is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_AMD_IOMMU is not set
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IRQ_REMAP is not set
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_SIGMA is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
CONFIG_CORDIC=y

[-- Attachment #3: working-lspci --]
[-- Type: application/octet-stream, Size: 3436 bytes --]

02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)
	Subsystem: Apple Computer Inc. Device 00e9
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at a0400000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
	Capabilities: [58] Vendor Specific Information: Len=78 <?>
	Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [d0] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
			ClockPM+ Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
	Capabilities: [13c v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Capabilities: [160 v1] Device Serial Number 83-54-12-ff-ff-08-b8-8d
	Capabilities: [16c v1] Power Budgeting <?>
	Kernel driver in use: brcmsmac
00: e4 14 53 43 06 00 10 00 01 00 80 02 40 00 00 00
10: 04 00 40 a0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 6b 10 e9 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
40: 01 58 03 ce 08 40 00 00 05 d0 80 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 09 48 78 00 0f 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 10 00 18 00 00 00 00 00 00 00 00 03 00 00 00
90: 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 03 00 00 10 10 18
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 10 00 01 00 a0 8f 90 05 00 00 19 00 11 6c 17 00
e0: 43 01 11 30 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


[-- Attachment #4: broken-lspci --]
[-- Type: application/octet-stream, Size: 3443 bytes --]

02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)
	Subsystem: Apple Computer Inc. Device 00e9
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at a0400000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
	Capabilities: [58] Vendor Specific Information: Len=78 <?>
	Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [d0] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
			ClockPM+ Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 0f, GenCap+ CGenEn- ChkCap+ ChkEn-
	Capabilities: [13c v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Capabilities: [160 v1] Device Serial Number 83-54-12-ff-ff-08-b8-8d
	Capabilities: [16c v1] Power Budgeting <?>
	Kernel driver in use: bcma-pci-bridge
00: e4 14 53 43 06 00 10 08 01 00 80 02 40 00 00 00
10: 04 00 40 a0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 6b 10 e9 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
40: 01 58 03 ce 08 40 00 00 05 d0 80 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 09 48 78 00 0f 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 18 00 00 00 00 00 00 00 00 03 00 00 00
90: 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 01 00 00 00 10 18
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 10 00 01 00 a0 8f 90 05 00 00 19 00 11 6c 17 00
e0: 43 01 11 30 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Re: brcm80211 breakage..

[Linus Torvalds]

On Wed, Jan 11, 2012 at 9:15 AM, Ben Hutchings
<bhutchings@solarflare.com> wrote:
>
> Maybe BRCMSMAC should select BCMA rather than depending on it.  This bus
> seems like kind of an implementation detail that people are unlikely to
> be aware of, unlike say PCI.

Yes, please. This is exactly the kind of thing "select" exists for.
Asking the user about some crazy proprietary broadcom bus interface is
useless, since no sane user should ever know or care about that kind
of thing.

                         Linus

Re: brcm80211 breakage..

[Linus Torvalds]

On Wed, Jan 11, 2012 at 9:00 AM, Larry Finger <Larry.Finger@lwfinger.net> wrote:
> --- wireless-testing-new.orig/drivers/bcma/sprom.c
> +++ wireless-testing-new/drivers/bcma/sprom.c
> @@ -230,6 +230,7 @@ int bcma_sprom_get(struct bcma_bus *bus)
>         * TODO: understand this condition and use it */
>        offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
>                BCMA_CC_SPROM_PCIE6;
> +       pr_debug("SPROM offset 0x%x\n", offset);
>        bcma_sprom_read(bus, offset, sprom);
>
>        if (bus->chipinfo.id == 0x4331)

So I did that - the offset is printed out as 0x0830
(BCMA_CC_SPROM_PCIE6). And when I change the offset to 0x0800
(BCMA_CC_SPROM), the complaint about SPROM version goes away.

IOW, these messages no longer exist:

[    0.815750] bcma: Unsupported SPROM revision: 255
[    0.815804] bcma: No SPROM available

but that doesn't actually make anything *work*. The brcms errors still
remain the same.

So the SPROM issue seems to be real, but irrelevant.

I also noticed that the CONFIG_BRCMDBG onyl enables pr_debug(), but
doesn't actually #define DEBUG, so pr_debug() gets compiled out
anyway.

I'll try with -DDEBUG in the brcm80211 subdirectory and see if I get
more interesting output that way.

                       Linus

Re: brcm80211 breakage..

[Larry Finger]

On 01/11/2012 07:06 PM, Linus Torvalds wrote:
> On Wed, Jan 11, 2012 at 9:00 AM, Larry Finger<Larry.Finger@lwfinger.net>  wrote:
>> --- wireless-testing-new.orig/drivers/bcma/sprom.c
>> +++ wireless-testing-new/drivers/bcma/sprom.c
>> @@ -230,6 +230,7 @@ int bcma_sprom_get(struct bcma_bus *bus)
>>          * TODO: understand this condition and use it */
>>         offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
>>                 BCMA_CC_SPROM_PCIE6;
>> +       pr_debug("SPROM offset 0x%x\n", offset);
>>         bcma_sprom_read(bus, offset, sprom);
>>
>>         if (bus->chipinfo.id == 0x4331)
>
> So I did that - the offset is printed out as 0x0830
> (BCMA_CC_SPROM_PCIE6). And when I change the offset to 0x0800
> (BCMA_CC_SPROM), the complaint about SPROM version goes away.
>
> IOW, these messages no longer exist:
>
> [    0.815750] bcma: Unsupported SPROM revision: 255
> [    0.815804] bcma: No SPROM available
>
> but that doesn't actually make anything *work*. The brcms errors still
> remain the same.
>
> So the SPROM issue seems to be real, but irrelevant.
>
> I also noticed that the CONFIG_BRCMDBG onyl enables pr_debug(), but
> doesn't actually #define DEBUG, so pr_debug() gets compiled out
> anyway.
>
> I'll try with -DDEBUG in the brcm80211 subdirectory and see if I get
> more interesting output that way.

OK. The SPROM issue is not completely irrelevant as that has to be correct, but 
obviously not sufficient.

What is the PCI ID for your device?

Larry

Re: brcm80211 breakage..

[Linus Torvalds]

On Wed, Jan 11, 2012 at 5:46 PM, Larry Finger <Larry.Finger@lwfinger.net> wrote:
>
> What is the PCI ID for your device?

You can decode it from the lspci output posted in another email in
this thread, but it's basically 14e4:4353 (rev 01).

                     Linus

Re: brcm80211 breakage..

[Linus Torvalds]

On Wed, Jan 11, 2012 at 5:46 PM, Larry Finger <Larry.Finger@lwfinger.net> wrote:
>
> OK. The SPROM issue is not completely irrelevant as that has to be correct,
> but obviously not sufficient.

Hmm. Having dug a bit deeper, I do think it's kind of related.

I get -ENODATA form sprom_read_pci(), but that function actually seems
to get the offset *right*.

Some printout shows that for that chip, I have

 - ai_get_ccrev(sih) = 34
 - sprom_offset = 0x800

but then it apparently reads all ones anyway. At least in the first
word. So then I get that -ENODATA error.

So once more, it's somehow related to the sprom, just in a new place:
sprom_read_pci() in brcmsmac/srom.c instead of drivers/bcma/sprom.c.

Does that give people any new ideas to try out?

                      Linus

Re: brcm80211 breakage..

[Larry Finger]

On 01/11/2012 08:11 PM, Linus Torvalds wrote:
> On Wed, Jan 11, 2012 at 5:46 PM, Larry Finger<Larry.Finger@lwfinger.net>  wrote:
>>
>> OK. The SPROM issue is not completely irrelevant as that has to be correct,
>> but obviously not sufficient.
>
> Hmm. Having dug a bit deeper, I do think it's kind of related.
>
> I get -ENODATA form sprom_read_pci(), but that function actually seems
> to get the offset *right*.
>
> Some printout shows that for that chip, I have
>
>   - ai_get_ccrev(sih) = 34
>   - sprom_offset = 0x800
>
> but then it apparently reads all ones anyway. At least in the first
> word. So then I get that -ENODATA error.
>
> So once more, it's somehow related to the sprom, just in a new place:
> sprom_read_pci() in brcmsmac/srom.c instead of drivers/bcma/sprom.c.
>
> Does that give people any new ideas to try out?

Things are getting curious. I have a 14e4:4353 device, which works with both b43 
and brcmsmac using mainline v3.2-6271-g925b5d2. The output of

dmesg | egrep "bcma|brcm"

with some extra debugging added yields:

bcma-pci-bridge 0000:06:00.0: PCI INT A -> Link[LK1E] -> GSI 22 (level, low) -> 
IRQ 22
bcma-pci-bridge 0000:06:00.0: setting latency timer to 64
bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
bcma: Found rev 6 PMU (capabilities 0x108C2606)
bcma: SPROM offset 0x830
bcma: Found SPROM Revision 8
bcma: Bus registered
brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 22
brcmsmac: Found chip type AI (0x1381a8d8)
brcmsmac: Applying 43224B0+ WARs
bcma: Switched to core: 0x812
brcms_module_init: register returned 0

I see no difference in the core revisions, etc. to explain why mine should work, 
and yours fail.

Arend: Any particular place we should look?

Larry

Re: brcm80211 breakage..

[Linus Torvalds]

On Wed, Jan 11, 2012 at 8:15 PM, Larry Finger <Larry.Finger@lwfinger.net> wrote:
>
> I see no difference in the core revisions, etc. to explain why mine should
> work, and yours fail.

Maybe your BIOS firmware sets things up, and the Apple Macbook Air
doesn't? And the driver used to initialize things sufficiently, and
the changes have broken that?

Apple is famous for being contrary. They tend to wire things up oddly,
they don't initialize things in the BIOS (they don't have a BIOS at
all, they use EFI, but even there they use their own abortion of an
EFI rather than what everybody else does), yadda yadda.

But the real point is: it used to work, and now it doesn't. This needs
to  get fixed, or it will get reverted.

                             Linus

Re: brcm80211 breakage..

[Linus Torvalds]

On Wed, Jan 11, 2012 at 9:20 PM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> Maybe your BIOS firmware sets things up, and the Apple Macbook Air
> doesn't? And the driver used to initialize things sufficiently, and
> the changes have broken that?

The code in v3.2 also used to support srom rev < 4, the new code
doesn't seem to do that.

Looking at the older initvars_srom_pci() (now "srom_var_init()") the
old code started out reading just SROM_WORDS, and then reading more
only if it found the srom4 signature. The new code always reads
SROM4_WORDS.

I dunno. But it looks to me like the new driver has dropped some logic
that used to exist in that driver. I don't know if it was ever used,
though, nor do I know if it's relevant. But if tat "dropped some
logic" is more widespread, it might well also cover some
initialization code.

                        Linus

Re: brcm80211 breakage..

[Rafał Miłecki]

2012/1/12 Linus Torvalds <torvalds@linux-foundation.org>:
> On Wed, Jan 11, 2012 at 9:20 PM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
>>
>> Maybe your BIOS firmware sets things up, and the Apple Macbook Air
>> doesn't? And the driver used to initialize things sufficiently, and
>> the changes have broken that?
>
> The code in v3.2 also used to support srom rev < 4, the new code
> doesn't seem to do that.

After hacking bcma to read SPROM from the correct location, what did
you get in dmesg? There should be info about version of SPROM.

There are 2 possible reasons for this issue:
1) bcma doesn't fully init your card
2) brcmsmac does sth wrong incorrectly as init

The story with brcmsmac is that it had code duplicated with bcma at
first. Now they partially switched to bcma, which inits bus for them,
and provide access to bus devices. However I'm afraid Broadcom didn't
remove duplicated init code (correct me if i'm wrong!). They may be
re-initializing bus and it's devices which cause some problems...

Linus: is this possible for you to give b43 a chance? It has to be compiled with
B43_BCMA
B43_PHY_N
Unfortunately you have to install firmware manually to get b43 working
:( Howto is located at:
http://wireless.kernel.org/en/users/Drivers/b43
("Install b43-fwcutter" and "If you are using the b43 driver from 3.2
kernel or newer:").

b43 doesn't re-init bus devices, so this test will check if bcma is OK or not.

-- 
Rafał

Re: brcm80211 breakage..

[Rafał Miłecki]

W dniu 12 stycznia 2012 08:08 użytkownik Rafał Miłecki
<zajec5@gmail.com> napisał:
> Linus: is this possible for you to give b43 a chance? It has to be compiled with
> B43_BCMA
> B43_PHY_N
> Unfortunately you have to install firmware manually to get b43 working
> :( Howto is located at:
> http://wireless.kernel.org/en/users/Drivers/b43
> ("Install b43-fwcutter" and "If you are using the b43 driver from 3.2
> kernel or newer:").
>
> b43 doesn't re-init bus devices, so this test will check if bcma is OK or not.

That probably will require blacklisting brcmsmac for a moment to
prevent bcma auto-loading it. Testing from cold-boot is recommended.

-- 
Rafał

Re: brcm80211 breakage..

[Linus Torvalds]

On Wed, Jan 11, 2012 at 9:30 PM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> The code in v3.2 also used to support srom rev < 4, the new code
> doesn't seem to do that.

I ended up trying to bisect this, and seem to have been successful.
The problem came in not with the BCMA use, but with commit
888153b3db3f ("brcm80211: smac: avoid sprom endianess conversions for
crc8 check")

I haven't yet tried to revert this on top of the current tree, but I'm
pretty sure about the bisection. That commit changes things to be read
a byte at a time, but it *also* removes the old code that only read
SROM_WORDS from the SROM.

Might the apple parts have different SROM contents? I assume "SROM" is
just a serial rom, which may be external and contain things like the ?

All the BCMA changes make the revert somewhat non-trivial, could
somebody who knows the code better please try to do it for me? It
doesn't look complicated, and I can try to do it myself tomorrow if
nobody else steps up, but I'd *really* prefer the guilty parties
themselves to do it, ok?

Arend - it's your commit...

                    Linus

Re: brcm80211 breakage..

[Rafał Miłecki]

2012/1/12 Linus Torvalds <torvalds@linux-foundation.org>:
> On Wed, Jan 11, 2012 at 9:30 PM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
>>
>> The code in v3.2 also used to support srom rev < 4, the new code
>> doesn't seem to do that.
>
> I ended up trying to bisect this, and seem to have been successful.
> The problem came in not with the BCMA use, but with commit
> 888153b3db3f ("brcm80211: smac: avoid sprom endianess conversions for
> crc8 check")

Uh, OK, that was tricky. BCMA switch was the biggest change and we
were assuming it has to be the guilty one. Thanks for bisecting!

-- 
Rafał

Re: brcm80211 breakage..

[Linus Torvalds]

2012/1/11 Rafał Miłecki <zajec5@gmail.com>:
>
> After hacking bcma to read SPROM from the correct location, what did
> you get in dmesg? There should be info about version of SPROM.

When I changed the offset from 830 to 800, I didn't get any sprom
version information at all.

Anyway, as mentioned in another email I just sent out, I bisected it,
and the problem actually predates the move to bcma.

                          Linus

Re: brcm80211 breakage..

[Linus Torvalds]

2012/1/11 Rafał Miłecki <zajec5@gmail.com>:
>
> Uh, OK, that was tricky. BCMA switch was the biggest change and we
> were assuming it has to be the guilty one. Thanks for bisecting!

Hey, I blamed the BCMA switch too, since it was the obvious big
change, and also caused the config problems I saw. So when the bisect
blithely went right past it and showed the exact same "si_attach
failed" messages even before that, I was all surprised.

Anyway, I'm done for today, and am hoping that somebody can pick up on
the revert effort.

                  Linus

Re: brcm80211 breakage..

[Arend van Spriel]

On 01/12/2012 08:13 AM, Linus Torvalds wrote:
> On Wed, Jan 11, 2012 at 9:30 PM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
>>
>> The code in v3.2 also used to support srom rev < 4, the new code
>> doesn't seem to do that.
> 
> I ended up trying to bisect this, and seem to have been successful.
> The problem came in not with the BCMA use, but with commit
> 888153b3db3f ("brcm80211: smac: avoid sprom endianess conversions for
> crc8 check")

Thanks for doing that while I had put my head on a pillow.

> I haven't yet tried to revert this on top of the current tree, but I'm
> pretty sure about the bisection. That commit changes things to be read
> a byte at a time, but it *also* removes the old code that only read
> SROM_WORDS from the SROM.
> 
> Might the apple parts have different SROM contents? I assume "SROM" is
> just a serial rom, which may be external and contain things like the ?

Mostly configuration parameters for RF/PHY.

> All the BCMA changes make the revert somewhat non-trivial, could
> somebody who knows the code better please try to do it for me? It
> doesn't look complicated, and I can try to do it myself tomorrow if
> nobody else steps up, but I'd *really* prefer the guilty parties
> themselves to do it, ok?
> 
> Arend - it's your commit...

Ok. I know a hint when I see one ;-)

>                     Linus
> 

Gr. AvS

Re: brcm80211 breakage..

[Arend van Spriel]

On 01/12/2012 05:15 AM, Larry Finger wrote:
> On 01/11/2012 08:11 PM, Linus Torvalds wrote:
>> On Wed, Jan 11, 2012 at 5:46 PM, Larry Finger<Larry.Finger@lwfinger.net>  wrote:
>>>
>>> OK. The SPROM issue is not completely irrelevant as that has to be correct,
>>> but obviously not sufficient.
>>
>> Hmm. Having dug a bit deeper, I do think it's kind of related.
>>
>> I get -ENODATA form sprom_read_pci(), but that function actually seems
>> to get the offset *right*.
>>
>> Some printout shows that for that chip, I have
>>
>>   - ai_get_ccrev(sih) = 34
>>   - sprom_offset = 0x800
>>
>> but then it apparently reads all ones anyway. At least in the first
>> word. So then I get that -ENODATA error.
>>
>> So once more, it's somehow related to the sprom, just in a new place:
>> sprom_read_pci() in brcmsmac/srom.c instead of drivers/bcma/sprom.c.
>>
>> Does that give people any new ideas to try out?
> 
> Things are getting curious. I have a 14e4:4353 device, which works with both b43 
> and brcmsmac using mainline v3.2-6271-g925b5d2. The output of
> 
> dmesg | egrep "bcma|brcm"
> 
> with some extra debugging added yields:
> 
> bcma-pci-bridge 0000:06:00.0: PCI INT A -> Link[LK1E] -> GSI 22 (level, low) -> 
> IRQ 22
> bcma-pci-bridge 0000:06:00.0: setting latency timer to 64
> bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
> bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
> bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
> bcma: Found rev 6 PMU (capabilities 0x108C2606)
> bcma: SPROM offset 0x830
> bcma: Found SPROM Revision 8
> bcma: Bus registered
> brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 22
> brcmsmac: Found chip type AI (0x1381a8d8)
> brcmsmac: Applying 43224B0+ WARs
> bcma: Switched to core: 0x812
> brcms_module_init: register returned 0
> 
> I see no difference in the core revisions, etc. to explain why mine should work, 
> and yours fail.
> 
> Arend: Any particular place we should look?
> 
> Larry
> 

Hi, Larry

I am surprised that we end up on sprom_read_pci(). That suggests that
MacBook Air has an external sprom. Can you tell me what the function
ai_is_sprom_available() returns on your system?

Gr. AvS

Re: brcm80211 breakage..

[Larry Finger]

On 01/12/2012 01:08 AM, Rafał Miłecki wrote:
> 2012/1/12 Linus Torvalds<torvalds@linux-foundation.org>:
>> On Wed, Jan 11, 2012 at 9:20 PM, Linus Torvalds
>> <torvalds@linux-foundation.org>  wrote:
>>>
>>> Maybe your BIOS firmware sets things up, and the Apple Macbook Air
>>> doesn't? And the driver used to initialize things sufficiently, and
>>> the changes have broken that?
>>
>> The code in v3.2 also used to support srom rev<  4, the new code
>> doesn't seem to do that.
>
> After hacking bcma to read SPROM from the correct location, what did
> you get in dmesg? There should be info about version of SPROM.

In the bcma version of the SPROM reading, there is no error logging other than 
the incorrect version message. In particular, there is no message when the CRC 
test fails, and the version will not be logged.

Larry

Re: brcm80211 breakage..

[Rafał Miłecki]

W dniu 12 stycznia 2012 16:39 użytkownik Larry Finger
<Larry.Finger@lwfinger.net> napisał:
> On 01/12/2012 01:08 AM, Rafał Miłecki wrote:
>>
>> 2012/1/12 Linus Torvalds<torvalds@linux-foundation.org>:
>>>
>>> On Wed, Jan 11, 2012 at 9:20 PM, Linus Torvalds
>>> <torvalds@linux-foundation.org>  wrote:
>>>>
>>>>
>>>> Maybe your BIOS firmware sets things up, and the Apple Macbook Air
>>>> doesn't? And the driver used to initialize things sufficiently, and
>>>> the changes have broken that?
>>>
>>>
>>> The code in v3.2 also used to support srom rev<  4, the new code
>>> doesn't seem to do that.
>>
>>
>> After hacking bcma to read SPROM from the correct location, what did
>> you get in dmesg? There should be info about version of SPROM.
>
>
> In the bcma version of the SPROM reading, there is no error logging other
> than the incorrect version message. In particular, there is no message when
> the CRC test fails, and the version will not be logged.

Oops, you're right. I forgot bcma doesn't have that (on the difference to ssb).

-- 
Rafał

Re: brcm80211 breakage..

[Linus Torvalds]

2012/1/12 Arend van Spriel <arend@broadcom.com>:
>
> Ok. I know a hint when I see one ;-)

Yeah. I'm real subtle.

          Linus

Re: brcm80211 breakage..

[Larry Finger]

On 01/12/2012 07:13 AM, Arend van Spriel wrote:
>
> Hi, Larry
>
> I am surprised that we end up on sprom_read_pci(). That suggests that
> MacBook Air has an external sprom. Can you tell me what the function
> ai_is_sprom_available() returns on your system?

It returns false. My card uses OTP.

Larry

Re: brcm80211 breakage..

[Larry Finger]

On 01/12/2012 07:13 AM, Arend van Spriel wrote:
>
> I am surprised that we end up on sprom_read_pci(). That suggests that
> MacBook Air has an external sprom. Can you tell me what the function
> ai_is_sprom_available() returns on your system?

For completeness, sromctrl is 0x12, thus bit 1 (SRC_PRESENT) is not set, and my 
device has an OTP, not an SPROM.

I do not see anything wrong with commit 888153b3db3f, but I realize that my card 
really does not test any of those changes.

Larry

Re: brcm80211 breakage..

[Linus Torvalds]

On Thu, Jan 12, 2012 at 9:18 AM, Larry Finger <Larry.Finger@lwfinger.net> wrote:
>
> For completeness, sromctrl is 0x12, thus bit 1 (SRC_PRESENT) is not set, and
> my device has an OTP, not an SPROM.

So this is again something that apple is *famous* for.

They try to control their hardware very tightly, and OS X will (for
example) not use non-apple wireless cards as "Airport" cards, and will
do things like dropping features ("Oh, you tried to save money by
buying a generic wireless minipci card instead of the apple branded
one? Well, that's fine, but now I'll make your network flaky and will
refuse to support 802.11n just to make a point.").

Never mind that the hardware is the same - they'll literally look at
the PCI subvendor ID and things like that, and if it doesn't say
"Apple", they will simply not enable all the features, or won't even
connect to it.

They've done this forever. Others do it too (I think both HP and IBM
have done the exact same thing with minipci wireless cards - back when
WiFi used to be a "premium" thing in a laptop, and vendors charged
quite a bit extra for it, gah!). But Apple does it for a *lot* of
things, presumably because they want to make it extra hard for clone
makers (or just tinkerers that would try to run OS X on a regular PC
that just happened to have the exact same hardware as a Macbook).

Seriously. I really like my Macbook Air hardware, but the moment some
non-apple supplier makes anything comparable, I'll drop it like the
crap it is. Exactly because Apple uses software to make it harder to
use. Installing Linux on that thing is "interesting" - Linux works
perfectly fine on it, but with all the special Apple firmware crap,
you have to jump through hoops.

> I do not see anything wrong with commit 888153b3db3f, but I realize that my
> card really does not test any of those changes.

I suspect the big change is the version check and the size of the
sprom image. Apple probably has an older version. I assume that the
subvendor ID etc comes from the srom?

                            Linus

Re: brcm80211 breakage..

[Larry Finger]

On 01/12/2012 11:31 AM, Linus Torvalds wrote:
> On Thu, Jan 12, 2012 at 9:18 AM, Larry Finger<Larry.Finger@lwfinger.net>  wrote:
>>
>> For completeness, sromctrl is 0x12, thus bit 1 (SRC_PRESENT) is not set, and
>> my device has an OTP, not an SPROM.
>
> So this is again something that apple is *famous* for.
>
> They try to control their hardware very tightly, and OS X will (for
> example) not use non-apple wireless cards as "Airport" cards, and will
> do things like dropping features ("Oh, you tried to save money by
> buying a generic wireless minipci card instead of the apple branded
> one? Well, that's fine, but now I'll make your network flaky and will
> refuse to support 802.11n just to make a point.").
>
> Never mind that the hardware is the same - they'll literally look at
> the PCI subvendor ID and things like that, and if it doesn't say
> "Apple", they will simply not enable all the features, or won't even
> connect to it.
>
> They've done this forever. Others do it too (I think both HP and IBM
> have done the exact same thing with minipci wireless cards - back when
> WiFi used to be a "premium" thing in a laptop, and vendors charged
> quite a bit extra for it, gah!). But Apple does it for a *lot* of
> things, presumably because they want to make it extra hard for clone
> makers (or just tinkerers that would try to run OS X on a regular PC
> that just happened to have the exact same hardware as a Macbook).
>
> Seriously. I really like my Macbook Air hardware, but the moment some
> non-apple supplier makes anything comparable, I'll drop it like the
> crap it is. Exactly because Apple uses software to make it harder to
> use. Installing Linux on that thing is "interesting" - Linux works
> perfectly fine on it, but with all the special Apple firmware crap,
> you have to jump through hoops.
>
>> I do not see anything wrong with commit 888153b3db3f, but I realize that my
>> card really does not test any of those changes.
>
> I suspect the big change is the version check and the size of the
> sprom image. Apple probably has an older version. I assume that the
> subvendor ID etc comes from the srom?

HP is not at all subtle. Their BIOS checks the hardware in the internal PCIe 
slot. If it is wifi and not on their whitelist, the computer will not boot. For 
my testing, Realtek sent me an extender that plugs into an Express Card slot. 
When this machine dies, I'm not sure what I'll do as I have not found a modern 
laptop with such a slot.

I too would like to blame Apple, but there is one factoid that I just noticed 
and I'm still exploring. When I run bcma/b43, the software says I have a Rev 8 
SPROM at offset 0x830, but bcma/brcmsmac says my card has no SPROM and it uses 
the OTP branch! Why, and what does it mean? Any thoughts from the Broadcom guys?

Larry

Re: brcm80211 breakage..

[Linus Torvalds]

On Wed, Jan 11, 2012 at 11:13 PM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> All the BCMA changes make the revert somewhat non-trivial, could
> somebody who knows the code better please try to do it for me? It
> doesn't look complicated, and I can try to do it myself tomorrow if
> nobody else steps up, but I'd *really* prefer the guilty parties
> themselves to do it, ok?

Since I had the hardware to test, I could work on this and try to
figure out exactly what went wrong in that commit.

The problem seems to be simple: the SPROM contents *have* to be read
as aligned 16-bit words. Anything else seems to return 0xff and just
fails the transaction.

I didn't check all the combinations, of course, so who knows what the
exact details are, but it does look like the sprom has very limited
pci decode and simply refuses to touch anything but the one case it
can handle.

I'll send out a patch that seems to get things to a working state for
me. At least I have wireless connectivity again, I don't know if there
are some other problems remaining.

                      Linus

Re: brcm80211 breakage..

[Linus Torvalds]

[-- Attachment #1: Type: text/plain, Size: 1169 bytes --]

On Thu, Jan 12, 2012 at 11:00 AM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> I'll send out a patch that seems to get things to a working state for
> me. At least I have wireless connectivity again, I don't know if there
> are some other problems remaining.

Ok, this is the patch that gets me going, and this is sent from the Macbook Air.

NOTE! The BCMA confusion about the sprom still exists, but doesn't
seem to matter:

 bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
 bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
 bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
 bcma: Found rev 6 PMU (capabilities 0x108C2606)
 bcma: Unsupported SPROM revision: 255
 bcma: No SPROM available
 bcma: Bus registered
  ..
 brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17
 brcmsmac: Found chip type AI (0x1381a8d8)
 brcmsmac: Applying 43224B0+ WARs
 bcma: Switched to core: 0x812
 ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
 brcms_module_init: register returned 0

so this does seem to work, but there are clearly some issues still..

                 Linus

[-- Attachment #2: patch.diff --]
[-- Type: text/x-patch, Size: 2609 bytes --]

 drivers/net/wireless/brcm80211/Makefile        |    2 +-
 drivers/net/wireless/brcm80211/brcmsmac/srom.c |   31 +++++++++++++++--------
 2 files changed, 21 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/Makefile b/drivers/net/wireless/brcm80211/Makefile
index f41c047eca82..bae5219cd8be 100644
--- a/drivers/net/wireless/brcm80211/Makefile
+++ b/drivers/net/wireless/brcm80211/Makefile
@@ -16,7 +16,7 @@
 # CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
 # common flags
-subdir-ccflags-$(CONFIG_BRCMDBG)	+= -DBCMDBG
+subdir-ccflags-$(CONFIG_BRCMDBG)	+= -DBCMDBG -DDEBUG
 
 obj-$(CONFIG_BRCMUTIL)	+= brcmutil/
 obj-$(CONFIG_BRCMFMAC)	+= brcmfmac/
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/srom.c b/drivers/net/wireless/brcm80211/brcmsmac/srom.c
index 61092156755e..563743643038 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/srom.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/srom.c
@@ -764,6 +764,22 @@ _initvars_srom_pci(u8 sromrev, u16 *srom, struct list_head *var_list)
 }
 
 /*
+ * The crc check is done on a little-endian array, we need
+ * to switch the bytes around before checking crc (and
+ * then switch it back).
+ */
+static int do_crc_check(u16 *buf, unsigned nwords)
+{
+	u8 crc;
+
+	cpu_to_le16_buf(buf, nwords);
+	crc = crc8(brcms_srom_crc8_table, (void *)buf, nwords << 1, CRC8_INIT_VALUE);
+	le16_to_cpu_buf(buf, nwords);
+
+	return crc == CRC8_GOOD_VALUE(brcms_srom_crc8_table);
+}
+
+/*
  * Read in and validate sprom.
  * Return 0 on success, nonzero on error.
  */
@@ -772,8 +788,6 @@ sprom_read_pci(struct si_pub *sih, u16 *buf, uint nwords, bool check_crc)
 {
 	int err = 0;
 	uint i;
-	u8 *bbuf = (u8 *)buf; /* byte buffer */
-	uint nbytes = nwords << 1;
 	struct bcma_device *core;
 	uint sprom_offset;
 
@@ -786,9 +800,9 @@ sprom_read_pci(struct si_pub *sih, u16 *buf, uint nwords, bool check_crc)
 		sprom_offset = CHIPCREGOFFS(sromotp);
 	}
 
-	/* read the sprom in bytes */
-	for (i = 0; i < nbytes; i++)
-		bbuf[i] = bcma_read8(core, sprom_offset+i);
+	/* read the sprom */
+	for (i = 0; i < nwords; i++)
+		buf[i] = bcma_read16(core, sprom_offset+i*2);
 
 	if (buf[0] == 0xffff)
 		/*
@@ -798,13 +812,8 @@ sprom_read_pci(struct si_pub *sih, u16 *buf, uint nwords, bool check_crc)
 		 */
 		return -ENODATA;
 
-	if (check_crc &&
-	    crc8(brcms_srom_crc8_table, bbuf, nbytes, CRC8_INIT_VALUE) !=
-		 CRC8_GOOD_VALUE(brcms_srom_crc8_table))
+	if (check_crc && !do_crc_check(buf, nwords))
 		err = -EIO;
-	else
-		/* now correct the endianness of the byte array */
-		le16_to_cpu_buf(buf, nwords);
 
 	return err;
 }

Re: brcm80211 breakage..

[Arend van Spriel]

On 01/12/2012 08:00 PM, Linus Torvalds wrote:
> On Wed, Jan 11, 2012 at 11:13 PM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
>>
>> All the BCMA changes make the revert somewhat non-trivial, could
>> somebody who knows the code better please try to do it for me? It
>> doesn't look complicated, and I can try to do it myself tomorrow if
>> nobody else steps up, but I'd *really* prefer the guilty parties
>> themselves to do it, ok?
> 
> Since I had the hardware to test, I could work on this and try to
> figure out exactly what went wrong in that commit.

I was trying to get my hands on a card with SPROM to dig in and I still
intend to get it because Apples are no pears.

> The problem seems to be simple: the SPROM contents *have* to be read
> as aligned 16-bit words. Anything else seems to return 0xff and just
> fails the transaction.

I was already wondering what aspect of the patch was causing the issue.
The transaction size requirement seems likely and I was not aware.

> I didn't check all the combinations, of course, so who knows what the
> exact details are, but it does look like the sprom has very limited
> pci decode and simply refuses to touch anything but the one case it
> can handle.
> 
> I'll send out a patch that seems to get things to a working state for
> me. At least I have wireless connectivity again, I don't know if there
> are some other problems remaining.
> 
>                       Linus
> 

Thanks for putting the effort into this in the middle of a merge window.

Gr. AvS

Re: brcm80211 breakage..

[Arend van Spriel]

On 01/12/2012 08:08 PM, Linus Torvalds wrote:
> On Thu, Jan 12, 2012 at 11:00 AM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
>>
>> I'll send out a patch that seems to get things to a working state for
>> me. At least I have wireless connectivity again, I don't know if there
>> are some other problems remaining.
> 
> Ok, this is the patch that gets me going, and this is sent from the Macbook Air.
> 
> NOTE! The BCMA confusion about the sprom still exists, but doesn't
> seem to matter:

That is because brcmsmac is not relying on the sprom logic provided by
bcma. As Rafał indicated that is duplicated code so if we are to use
bcma sprom functionality that needs to be fixed (after the merge window).

>  bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
>  bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
>  bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
>  bcma: Found rev 6 PMU (capabilities 0x108C2606)
>  bcma: Unsupported SPROM revision: 255
>  bcma: No SPROM available
>  bcma: Bus registered
>   ..
>  brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17
>  brcmsmac: Found chip type AI (0x1381a8d8)
>  brcmsmac: Applying 43224B0+ WARs
>  bcma: Switched to core: 0x812
>  ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>  brcms_module_init: register returned 0
> 
> so this does seem to work, but there are clearly some issues still..
> 
>                  Linus

That output look fine. The patch looks fine although you can use the new
do_crc_check() function in otp_read_pci as well.

Gr. AvS

Re: brcm80211 breakage..

[Linus Torvalds]

2012/1/12 Arend van Spriel <arend@broadcom.com>:
>
> That output look fine. The patch looks fine although you can use the new
> do_crc_check() function in otp_read_pci as well.

I'll leave that as a separate cleanup for somebody who has the
hardware to test it. I committed the 16-bit read fix for now.

But I'm currently also trying to work out why that macbook air no
longer comes back from a suspend alive, and it looks like it may be
another problem with that brcmsmac driver. The bisection is in its
early stages yet, but it looks like it is coming in from the network
merge, and nothing else looks relevant.

Has suspend/resume been tested exhaustively with that driver?

                     Linus

Re: brcm80211 breakage..

[Arend van Spriel]

On 01/12/2012 09:27 PM, Linus Torvalds wrote:
> 2012/1/12 Arend van Spriel <arend@broadcom.com>:
>>
>> That output look fine. The patch looks fine although you can use the new
>> do_crc_check() function in otp_read_pci as well.
> 
> I'll leave that as a separate cleanup for somebody who has the
> hardware to test it. I committed the 16-bit read fix for now.

Ah. yet another hint :-p

> But I'm currently also trying to work out why that macbook air no
> longer comes back from a suspend alive, and it looks like it may be
> another problem with that brcmsmac driver. The bisection is in its
> early stages yet, but it looks like it is coming in from the network
> merge, and nothing else looks relevant.
> 
> Has suspend/resume been tested exhaustively with that driver?
> 
>                      Linus
> 

BCMA introduced suspend/resume after the BCMA changes in brcmsmac so
there may still be issues.

Gr. AvS

Re: brcm80211 breakage..

[Linus Torvalds]

On Thu, Jan 12, 2012 at 12:27 PM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> But I'm currently also trying to work out why that macbook air no
> longer comes back from a suspend alive, and it looks like it may be
> another problem with that brcmsmac driver. The bisection is in its
> early stages yet, but it looks like it is coming in from the network
> merge, and nothing else looks relevant.

Ugh. This is nasty to bisect, because it goes back to the pre-3.2 days
that didn't support graphics properly on that Macbook Air either. So
I've been having to work around not just the "wireless doesn't work",
but also the "graphics doesn't work" issue.

But after lots of nasty bisection problems and a few false starts, it
definitely looks like the brcmsmac driver. I don't know exactly which
commit, but it's all in network drivers now, and the only network
driver on this machine is the brcmsmac one.

                     Linus

Re: brcm80211 breakage..

[Rafał Miłecki]

2012/1/12 Linus Torvalds <torvalds@linux-foundation.org>:
> On Thu, Jan 12, 2012 at 12:27 PM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
>>
>> But I'm currently also trying to work out why that macbook air no
>> longer comes back from a suspend alive, and it looks like it may be
>> another problem with that brcmsmac driver. The bisection is in its
>> early stages yet, but it looks like it is coming in from the network
>> merge, and nothing else looks relevant.
>
> Ugh. This is nasty to bisect, because it goes back to the pre-3.2 days
> that didn't support graphics properly on that Macbook Air either. So
> I've been having to work around not just the "wireless doesn't work",
> but also the "graphics doesn't work" issue.
>
> But after lots of nasty bisection problems and a few false starts, it
> definitely looks like the brcmsmac driver. I don't know exactly which
> commit, but it's all in network drivers now, and the only network
> driver on this machine is the brcmsmac one.

Make sure you have

commit 775ab52142b02237a54184238e922251c59a2b5c
Author: Rafał Miłecki <zajec5@gmail.com>
Date:   Fri Dec 9 22:16:07 2011 +0100

    bcma: support for suspend and resume

applied. I believe this patch already has hit your tree, but maybe
because of bisecting you are at some old commit without this patch.

-- 
Rafał

Re: brcm80211 breakage..

[Linus Torvalds]

2012/1/12 Rafał Miłecki <zajec5@gmail.com>:
>
> Make sure you have
>
> commit 775ab52142b02237a54184238e922251c59a2b5c
> Author: Rafał Miłecki <zajec5@gmail.com>
> Date:   Fri Dec 9 22:16:07 2011 +0100
>
>    bcma: support for suspend and resume
>
> applied. I believe this patch already has hit your tree, but maybe
> because of bisecting you are at some old commit without this patch.

That one is *not* sufficient. Current -git doesn't suspend/resume.

                    Linus

Re: brcm80211 breakage..

[Rafał Miłecki]

W dniu 12 stycznia 2012 23:45 użytkownik Linus Torvalds
<torvalds@linux-foundation.org> napisał:
> 2012/1/12 Rafał Miłecki <zajec5@gmail.com>:
>>
>> Make sure you have
>>
>> commit 775ab52142b02237a54184238e922251c59a2b5c
>> Author: Rafał Miłecki <zajec5@gmail.com>
>> Date:   Fri Dec 9 22:16:07 2011 +0100
>>
>>    bcma: support for suspend and resume
>>
>> applied. I believe this patch already has hit your tree, but maybe
>> because of bisecting you are at some old commit without this patch.
>
> That one is *not* sufficient. Current -git doesn't suspend/resume.

Forgive me if it was already said, but I didn't see it.

Have you tried booting with bcma & brcmsmac blacklisted? Does
suspend&resume work then?

Have you tried blacklisting just brcmsmac (letting bcma load)? Does
s&r work then?

-- 
Rafał

Re: brcm80211 breakage..

[Linus Torvalds]

2012/1/12 Rafał Miłecki <zajec5@gmail.com>:
>
> Have you tried booting with bcma & brcmsmac blacklisted? Does
> suspend&resume work then?
>
> Have you tried blacklisting just brcmsmac (letting bcma load)? Does
> s&r work then?

If I unload brcmsmac, I can suspend/resume. Once. It can't suspend a
second time.

I did see some message flash about "does not have a release()
function", but don't know if that was bcma or something else.

I do notice that both the bcma and suspend/resume seems quite broken.
It's using the legacy suspend/resume stuff and does the PCI resume on
its own (with no matching suspend!). That *really* isn't a good idea
these days.

The way to do it these days is to have a struct dev_pm_ops embedded in
the struct pci_driver (".driver.pm"), and let the PCI layer handle all
the generic PCI suspend/resume  details - you only handle the
device-specific ones (ie in this case suspending/resuming the bcma bus
itself).

The generic PCI layer will do all the PCI stuff correctly, including
all the nasty races with shared interrupts etc. In a way that no
driver ever got it right. And it simplifies the driver too.

And the brcms driver does suspend/resume *completely* wrong, and seems
to actually re-suspend and re-resume the PCI device.

I'm surprised it has ever worked for anybody. It certainly doesn't work for me.

                      Linus

Re: brcm80211 breakage..

[Larry Finger]

On 01/12/2012 01:00 PM, Linus Torvalds wrote:
> On Wed, Jan 11, 2012 at 11:13 PM, Linus Torvalds
> <torvalds@linux-foundation.org>  wrote:
>>
>> All the BCMA changes make the revert somewhat non-trivial, could
>> somebody who knows the code better please try to do it for me? It
>> doesn't look complicated, and I can try to do it myself tomorrow if
>> nobody else steps up, but I'd *really* prefer the guilty parties
>> themselves to do it, ok?
>
> Since I had the hardware to test, I could work on this and try to
> figure out exactly what went wrong in that commit.
>
> The problem seems to be simple: the SPROM contents *have* to be read
> as aligned 16-bit words. Anything else seems to return 0xff and just
> fails the transaction.
>
> I didn't check all the combinations, of course, so who knows what the
> exact details are, but it does look like the sprom has very limited
> pci decode and simply refuses to touch anything but the one case it
> can handle.
>
> I'll send out a patch that seems to get things to a working state for
> me. At least I have wireless connectivity again, I don't know if there
> are some other problems remaining.

As my device has both SPROM and OTP, I hacked on it to get it to use the SPROM 
rather than the default OTP.

I learned that reading by byte on my HP laptop fails the same was as did the 
MacBook - it is not an Apple artifact.

Note, the patch that worked for me is as follows:

Index: linux-2.6/drivers/net/wireless/brcm80211/brcmsmac/srom.c
===================================================================
--- linux-2.6.orig/drivers/net/wireless/brcm80211/brcmsmac/srom.c
+++ linux-2.6/drivers/net/wireless/brcm80211/brcmsmac/srom.c
@@ -786,9 +786,12 @@ sprom_read_pci(struct si_pub *sih, u16 *
  		sprom_offset = CHIPCREGOFFS(sromotp);
  	}

-	/* read the sprom in bytes */
-	for (i = 0; i < nbytes; i++)
-		bbuf[i] = bcma_read8(core, sprom_offset+i);
+	/* read the sprom - this operation must be done by words */
+	for (i = 0; i < nbytes; i += 2) {
+		u16 data = bcma_read16(core, sprom_offset+i);
+		bbuf[i] = data & 0xff;
+		bbuf[i+1] = (data >> 8) & 0xff;
+	}

  	if (buf[0] == 0xffff)
  		/*


Larry

Re: brcm80211 breakage..

[Linus Torvalds]

2012/1/12 Linus Torvalds <torvalds@linux-foundation.org>:
>
> I'm surprised it has ever worked for anybody. It certainly doesn't work for me.

So I can suspend the bcma driver on its own until the cows come home.

But after I have suspended the bcma driver even once, just doing a
"modprobe brcmsmac" will hang the machine hard. Dunno where, but this
is probably the same thing as "hangs on resume".

                             Linus

Re: brcm80211 breakage..

[Linus Torvalds]

2012/1/12 Linus Torvalds <torvalds@linux-foundation.org>:
> 2012/1/12 Linus Torvalds <torvalds@linux-foundation.org>:
>>
>> I'm surprised it has ever worked for anybody. It certainly doesn't work for me.
>
> So I can suspend the bcma driver on its own until the cows come home.
>
> But after I have suspended the bcma driver even once, just doing a
> "modprobe brcmsmac" will hang the machine hard. Dunno where, but this
> is probably the same thing as "hangs on resume".

Guys, has suspend/resume with the bcma interface been tested AT ALL?

The suspend/resume fields of "struct bcma_driver" are COMPLETELY
UNUSED. The only place in the kernel that uses them is the brcmsmac
driver that does this write-only assignment:

        .suspend  = brcms_suspend,
        .resume   = brcms_resume,

nothing else uses them. NOTHING. I tested by just removing the fields
and compiling the bcma subsystem, just in case there was something
really subtle that I was missing and was hidden through some magic
hidden approach. But no.

Seriously - how was something that isn't even connected ever supposed
to work at all? And why was the BCMA conversion of that driver sent
up-stream if something as fundamental as suspend/resume had never been
done, and didn't actually work?

What am I missing now? How the hell can this ever have worked for
ANYBODY? What kind of f*&*ing sick joke is this all?

                      Linus

Re: brcm80211 breakage..

[Rafał Miłecki]

W dniu 13 stycznia 2012 06:34 użytkownik Linus Torvalds
<torvalds@linux-foundation.org> napisał:
> 2012/1/12 Linus Torvalds <torvalds@linux-foundation.org>:
>> 2012/1/12 Linus Torvalds <torvalds@linux-foundation.org>:
>>>
>>> I'm surprised it has ever worked for anybody. It certainly doesn't work for me.
>>
>> So I can suspend the bcma driver on its own until the cows come home.
>>
>> But after I have suspended the bcma driver even once, just doing a
>> "modprobe brcmsmac" will hang the machine hard. Dunno where, but this
>> is probably the same thing as "hangs on resume".
>
> Guys, has suspend/resume with the bcma interface been tested AT ALL?
>
> The suspend/resume fields of "struct bcma_driver" are COMPLETELY
> UNUSED. The only place in the kernel that uses them is the brcmsmac
> driver that does this write-only assignment:
>
>        .suspend  = brcms_suspend,
>        .resume   = brcms_resume,
>
> nothing else uses them. NOTHING. I tested by just removing the fields
> and compiling the bcma subsystem, just in case there was something
> really subtle that I was missing and was hidden through some magic
> hidden approach. But no.
>
> Seriously - how was something that isn't even connected ever supposed
> to work at all? And why was the BCMA conversion of that driver sent
> up-stream if something as fundamental as suspend/resume had never been
> done, and didn't actually work?
>
> What am I missing now? How the hell can this ever have worked for
> ANYBODY? What kind of f*&*ing sick joke is this all?

The suspend&resume wasn't implemented for some time because my PC
doesn't s&r. And I don't have access to notebook with mini PCIe slot.

I've implemented support for s&r in bcma when I got to open my Sony
VAIO to replace A/C power slot. It was one time I was able to change
WiFi card in my notebook which has really-ugly-hidden mini PCIe slot.

S&r was working fine for me with bcma&b43 after writing that patch!
That includes suspending and resuming multiple times. And tests were
done with the same card you're using.

The lock up on (resume|loading brcmsmac) means bus wasn't initialized
correctly after resume. It does not have to be brcmsmac bug. We're
accessing some registers before they're ready.

Linus: can you do one trivial test for me? Please simply try unloading
bcma before suspending. Then resume and load bcma and brcmsmac. Does
it still lockup your machine?

-- 
Rafał

Re: brcm80211 breakage..

[Rafał Miłecki]

W dniu 13 stycznia 2012 07:50 użytkownik Rafał Miłecki
<zajec5@gmail.com> napisał:
> W dniu 13 stycznia 2012 06:34 użytkownik Linus Torvalds
> <torvalds@linux-foundation.org> napisał:
>> 2012/1/12 Linus Torvalds <torvalds@linux-foundation.org>:
>>> 2012/1/12 Linus Torvalds <torvalds@linux-foundation.org>:
>>>>
>>>> I'm surprised it has ever worked for anybody. It certainly doesn't work for me.
>>>
>>> So I can suspend the bcma driver on its own until the cows come home.
>>>
>>> But after I have suspended the bcma driver even once, just doing a
>>> "modprobe brcmsmac" will hang the machine hard. Dunno where, but this
>>> is probably the same thing as "hangs on resume".
>>
>> Guys, has suspend/resume with the bcma interface been tested AT ALL?
>>
>> The suspend/resume fields of "struct bcma_driver" are COMPLETELY
>> UNUSED. The only place in the kernel that uses them is the brcmsmac
>> driver that does this write-only assignment:
>>
>>        .suspend  = brcms_suspend,
>>        .resume   = brcms_resume,
>>
>> nothing else uses them. NOTHING. I tested by just removing the fields
>> and compiling the bcma subsystem, just in case there was something
>> really subtle that I was missing and was hidden through some magic
>> hidden approach. But no.
>>
>> Seriously - how was something that isn't even connected ever supposed
>> to work at all? And why was the BCMA conversion of that driver sent
>> up-stream if something as fundamental as suspend/resume had never been
>> done, and didn't actually work?
>>
>> What am I missing now? How the hell can this ever have worked for
>> ANYBODY? What kind of f*&*ing sick joke is this all?
>
> The suspend&resume wasn't implemented for some time because my PC
> doesn't s&r. And I don't have access to notebook with mini PCIe slot.
>
> I've implemented support for s&r in bcma when I got to open my Sony
> VAIO to replace A/C power slot. It was one time I was able to change
> WiFi card in my notebook which has really-ugly-hidden mini PCIe slot.
>
> S&r was working fine for me with bcma&b43 after writing that patch!
> That includes suspending and resuming multiple times. And tests were
> done with the same card you're using.
>
> The lock up on (resume|loading brcmsmac) means bus wasn't initialized
> correctly after resume. It does not have to be brcmsmac bug. We're
> accessing some registers before they're ready.
>
> Linus: can you do one trivial test for me? Please simply try unloading
> bcma before suspending. Then resume and load bcma and brcmsmac. Does
> it still lockup your machine?

Actually.. I've re-read your mail and I got it wrong at first. I
though you can suspend&resume once, but then loading brcmsmac causes
lock up. I interpreted that as broken initialization after resume.

Now I see you *can't suspend for the second time*. I don't get it :/
I've no idea what wrong we may be doing in that trivial
bcma_host_pci_suspend and bcma_host_pci_resume stopping you from
suspending for the second time.

I'll take a look at that new pm ops you told me about.

-- 
Rafał

Re: brcm80211 breakage..

[Linus Torvalds]

2012/1/12 Rafał Miłecki <zajec5@gmail.com>:
>
> Linus: can you do one trivial test for me? Please simply try unloading
> bcma before suspending. Then resume and load bcma and brcmsmac. Does
> it still lockup your machine?

That works, but is not interesting. It just reloads everything.

The thing is, your hardware clearly never powers anything down,
because the bcma suspend/resume functions aren't hooked up to
anything, so the brcmsmac suspend/resume never gets called at all.

And it sounds like it works for you for the simple reason that your
hardware never loses power - so you don't need to do anything for
suspend/resume.

But there is absolutely zero question about it - the code does not
work. Never has. It's just that your hardware doesn't *need* any code
at all, and as far as you are concerned, suspend/resume doesn't even
really happen (the PCI layer handles the regular "set to D3 and back
to D0", so the fact that the driver doesn't do anything never shows
up)

                       Linus

Re: brcm80211 breakage..

[Linus Torvalds]

2012/1/12 Rafał Miłecki <zajec5@gmail.com>:
>
> Actually.. I've re-read your mail and I got it wrong at first. I
> though you can suspend&resume once, but then loading brcmsmac causes
> lock up. I interpreted that as broken initialization after resume.

That is correct.

And I cannot suspend/resume AT ALL if I actually keep brcmsmac loaded
- then it will lock up at resume - exactly the same way it locks up at
loading brcmsmac time if I had unloaded it.

> Now I see you *can't suspend for the second time*. I don't get it :/

No, that was an unrelated bug, I'm chasing that one down too and it
seems to be in the machine check driver.

                           Linus

[PATCH] bcma: s&r: NULL mapped core

[Rafał Miłecki]

---
 drivers/bcma/host_pci.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
index 443b83a..726e43d 100644
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -237,11 +237,16 @@ static void bcma_host_pci_remove(struct pci_dev *dev)
 #ifdef CONFIG_PM
 static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state)
 {
+	struct bcma_bus *bus = pci_get_drvdata(dev);
+
 	/* Host specific */
 	pci_save_state(dev);
 	pci_disable_device(dev);
 	pci_set_power_state(dev, pci_choose_state(dev, state));
 
+	/* Bus specific */
+	bus->mapped_core = NULL;
+
 	return 0;
 }
 
-- 
1.7.7

Re: [PATCH] bcma: s&r: NULL mapped core

[Linus Torvalds]

Yup. This definitely helps.

I haven't done a lot of suspend/resume cycles, and I have my own
cleanups in my tree, but with this, I finally get a successful resume.

I'll send out a series of cleanups and fixes that will include this.
Can you test whether my series works for you too?

               Linus

On Thu, Jan 12, 2012 at 11:41 PM, Rafał Miłecki <zajec5@gmail.com> wrote:
> ---
>  drivers/bcma/host_pci.c |    5 +++++
>  1 files changed, 5 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
> index 443b83a..726e43d 100644
> --- a/drivers/bcma/host_pci.c
> +++ b/drivers/bcma/host_pci.c
> @@ -237,11 +237,16 @@ static void bcma_host_pci_remove(struct pci_dev *dev)
>  #ifdef CONFIG_PM
>  static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state)
>  {
> +       struct bcma_bus *bus = pci_get_drvdata(dev);
> +
>        /* Host specific */
>        pci_save_state(dev);
>        pci_disable_device(dev);
>        pci_set_power_state(dev, pci_choose_state(dev, state));
>
> +       /* Bus specific */
> +       bus->mapped_core = NULL;
> +
>        return 0;
>  }
>
> --
> 1.7.7
>

[0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Linus Torvalds]

So here are five cleanup/fix patches that try to make the bcma and 
brcmsmac suspend/resume situation look better.

The changes do:

 - use the modern PCI suspend/resume model, and let the PCI layer handle 
   the actual standard power state changes.

 - clean up the BCMA suspend/resume infrastructure a bit in general.

 - actually hook the BCMA suspend/resume callbacks up to the 
   suspend/resume event - it use to be that a bcma driver could set its 
   suspend/resume routines, but nothing would ever call them.

 - and Rafał's bcma window invalidation

Comments? This gets suspend/resume working for me at least once. I'm not 
going to try to hang my machine again until after I have gotten this sent 
out.

Does this work for others?

               Linus

[PATCH 1/5] bcma: convert suspend/resume to pm_ops

[Linus Torvalds]

From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 12 Jan 2012 22:47:01 -0800

.. and avoid doing th eunnecessary PCI operations - the PCI layer will do them for us.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/bcma/host_pci.c |   38 +++++++++++++-------------------------
 1 files changed, 13 insertions(+), 25 deletions(-)

diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
index 443b83a2fd7a..3aee641c9b7b 100644
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -235,38 +235,27 @@ static void bcma_host_pci_remove(struct pci_dev *dev)
 }
 
 #ifdef CONFIG_PM
-static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state)
+static int bcma_suspend(struct device *dev)
 {
-	/* Host specific */
-	pci_save_state(dev);
-	pci_disable_device(dev);
-	pci_set_power_state(dev, pci_choose_state(dev, state));
-
 	return 0;
 }
 
-static int bcma_host_pci_resume(struct pci_dev *dev)
+static int bcma_resume(struct device *dev)
 {
-	struct bcma_bus *bus = pci_get_drvdata(dev);
-	int err;
-
-	/* Host specific */
-	pci_set_power_state(dev, 0);
-	err = pci_enable_device(dev);
-	if (err)
-		return err;
-	pci_restore_state(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct bcma_bus *bus = pci_get_drvdata(pdev);
 
-	/* Bus specific */
-	err = bcma_bus_resume(bus);
-	if (err)
-		return err;
+	return bcma_bus_resume(bus);
 
-	return 0;
 }
+
+static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_suspend, bcma_resume);
+#define BCMA_PM_OPS     (&bcma_pm_ops)
+
 #else /* CONFIG_PM */
-# define bcma_host_pci_suspend	NULL
-# define bcma_host_pci_resume	NULL
+
+#define BCMA_PM_OPS     NULL
+
 #endif /* CONFIG_PM */
 
 static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
@@ -284,8 +273,7 @@ static struct pci_driver bcma_pci_bridge_driver = {
 	.id_table = bcma_pci_bridge_tbl,
 	.probe = bcma_host_pci_probe,
 	.remove = bcma_host_pci_remove,
-	.suspend = bcma_host_pci_suspend,
-	.resume = bcma_host_pci_resume,
+	.driver.pm = BCMA_PM_OPS,
 };
 
 int __init bcma_host_pci_init(void)
-- 
1.7.8.rc2.3.g0911

[PATCH 2/5] bcma: add stub for bcma_bus suspend()

[Linus Torvalds]

From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 12 Jan 2012 22:50:31 -0800

.. and connect it up with the pci host bcma driver.

Now, the next step is to connect those bcma bus-level suspend/resume
functions to the actual bcma device suspend resume functions.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/bcma/bcma_private.h |    1 +
 drivers/bcma/host_pci.c     |    5 ++++-
 drivers/bcma/main.c         |    5 +++++
 3 files changed, 10 insertions(+), 1 deletions(-)

diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
index fda56bde36b8..0def898a1d15 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -19,6 +19,7 @@ int __init bcma_bus_early_register(struct bcma_bus *bus,
 				   struct bcma_device *core_cc,
 				   struct bcma_device *core_mips);
 #ifdef CONFIG_PM
+int bcma_bus_suspend(struct bcma_bus *bus);
 int bcma_bus_resume(struct bcma_bus *bus);
 #endif
 
diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
index 3aee641c9b7b..33ec3054248e 100644
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -237,7 +237,10 @@ static void bcma_host_pci_remove(struct pci_dev *dev)
 #ifdef CONFIG_PM
 static int bcma_suspend(struct device *dev)
 {
-	return 0;
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct bcma_bus *bus = pci_get_drvdata(pdev);
+
+	return bcma_bus_suspend(bus);
 }
 
 static int bcma_resume(struct device *dev)
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 10f92b371e58..b711d9d634a7 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -241,6 +241,11 @@ int __init bcma_bus_early_register(struct bcma_bus *bus,
 }
 
 #ifdef CONFIG_PM
+int bcma_bus_suspend(struct bcma_bus *bus)
+{
+	return 0;
+}
+
 int bcma_bus_resume(struct bcma_bus *bus)
 {
 	struct bcma_device *core;
-- 
1.7.8.rc2.3.g0911

[PATCH 3/5] bcma: connect the bcma bus suspend/resume to the bcma driver suspend/resume

[Linus Torvalds]

From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 12 Jan 2012 23:15:41 -0800

Now the low-level driver actually gets informed that it is getting suspended and resumed.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/bcma/main.c                                |   19 +++++++++++++++++++
 .../net/wireless/brcm80211/brcmsmac/mac80211_if.c  |    2 +-
 include/linux/bcma/bcma.h                          |    2 +-
 3 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index b711d9d634a7..febbc0a1222a 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -243,6 +243,16 @@ int __init bcma_bus_early_register(struct bcma_bus *bus,
 #ifdef CONFIG_PM
 int bcma_bus_suspend(struct bcma_bus *bus)
 {
+	struct bcma_device *core;
+
+	list_for_each_entry(core, &bus->cores, list) {
+		struct device_driver *drv = core->dev.driver;
+		if (drv) {
+			struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv);
+			if (adrv->suspend)
+				adrv->suspend(core);
+		}
+	}
 	return 0;
 }
 
@@ -257,6 +267,15 @@ int bcma_bus_resume(struct bcma_bus *bus)
 		bcma_core_chipcommon_init(&bus->drv_cc);
 	}
 
+	list_for_each_entry(core, &bus->cores, list) {
+		struct device_driver *drv = core->dev.driver;
+		if (drv) {
+			struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv);
+			if (adrv->resume)
+				adrv->resume(core);
+		}
+	}
+
 	return 0;
 }
 #endif
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index d106576ce338..213130afdaf7 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -1135,7 +1135,7 @@ static int brcms_pci_suspend(struct pci_dev *pdev)
 	return pci_set_power_state(pdev, PCI_D3hot);
 }
 
-static int brcms_suspend(struct bcma_device *pdev, pm_message_t state)
+static int brcms_suspend(struct bcma_device *pdev)
 {
 	struct brcms_info *wl;
 	struct ieee80211_hw *hw;
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index f4b8346b1a33..83c209f39493 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -162,7 +162,7 @@ struct bcma_driver {
 
 	int (*probe)(struct bcma_device *dev);
 	void (*remove)(struct bcma_device *dev);
-	int (*suspend)(struct bcma_device *dev, pm_message_t state);
+	int (*suspend)(struct bcma_device *dev);
 	int (*resume)(struct bcma_device *dev);
 	void (*shutdown)(struct bcma_device *dev);
 
-- 
1.7.8.rc2.3.g0911

[PATCH 4/5] brcmsmac: remove PCI suspend/resume from bcma driver

[Linus Torvalds]

From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 12 Jan 2012 23:36:52 -0800

The brcmsmac driver isn't a PCI driver any more, it's a bcma one.  The
PCI device has been resumed by the PCI driver (the generic PCI layer,
really), we should be resuming just our own driver state.

Also add pr_debug() calls to show that we now actually get the
suspend/resume events.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 .../net/wireless/brcm80211/brcmsmac/mac80211_if.c  |   38 ++------------------
 1 files changed, 3 insertions(+), 35 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 213130afdaf7..448ab9c4eb47 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -1128,13 +1128,6 @@ static int __devinit brcms_bcma_probe(struct bcma_device *pdev)
 	return 0;
 }
 
-static int brcms_pci_suspend(struct pci_dev *pdev)
-{
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	return pci_set_power_state(pdev, PCI_D3hot);
-}
-
 static int brcms_suspend(struct bcma_device *pdev)
 {
 	struct brcms_info *wl;
@@ -1153,40 +1146,15 @@ static int brcms_suspend(struct bcma_device *pdev)
 	wl->pub->hw_up = false;
 	spin_unlock_bh(&wl->lock);
 
-	/* temporarily do suspend ourselves */
-	return brcms_pci_suspend(pdev->bus->host_pci);
-}
-
-static int brcms_pci_resume(struct pci_dev *pdev)
-{
-	int err = 0;
-	uint val;
-
-	err = pci_set_power_state(pdev, PCI_D0);
-	if (err)
-		return err;
-
-	pci_restore_state(pdev);
-
-	err = pci_enable_device(pdev);
-	if (err)
-		return err;
-
-	pci_set_master(pdev);
-
-	pci_read_config_dword(pdev, 0x40, &val);
-	if ((val & 0x0000ff00) != 0)
-		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+	pr_debug("brcms_suspend ok\n");
 
 	return 0;
 }
 
 static int brcms_resume(struct bcma_device *pdev)
 {
-	/*
-	*  just do pci resume for now until bcma supports it.
-	*/
-	return brcms_pci_resume(pdev->bus->host_pci);
+	pr_debug("brcms_resume ok\n");
+	return 0;
 }
 
 static struct bcma_driver brcms_bcma_driver = {
-- 
1.7.8.rc2.3.g0911

[PATCH 5/5] bcma: invalidate the mapped window over suspend/resume

[Linus Torvalds]

From: Rafał Miłecki <zajec5@gmail.com>
Date: Thu, 12 Jan 2012 23:51:30 -0800

This clears the current mapped window when suspending, so that the
resumed state will re-map them as required.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/bcma/main.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index febbc0a1222a..d185039690bc 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -253,6 +253,8 @@ int bcma_bus_suspend(struct bcma_bus *bus)
 				adrv->suspend(core);
 		}
 	}
+
+	bus->mapped_core = NULL;
 	return 0;
 }
 
-- 
1.7.8.rc2.3.g0911

Re: [PATCH 1/5] bcma: convert suspend/resume to pm_ops

[Arend van Spriel]

On 01/13/2012 09:00 AM, Linus Torvalds wrote:
> 
> From: Linus Torvalds <torvalds@linux-foundation.org>
> Date: Thu, 12 Jan 2012 22:47:01 -0800
> 
> .. and avoid doing th eunnecessary PCI operations - the PCI layer will do them for us.
> 
> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
> ---
>  drivers/bcma/host_pci.c |   38 +++++++++++++-------------------------
>  1 files changed, 13 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
> index 443b83a2fd7a..3aee641c9b7b 100644
> --- a/drivers/bcma/host_pci.c
> +++ b/drivers/bcma/host_pci.c
> @@ -235,38 +235,27 @@ static void bcma_host_pci_remove(struct pci_dev *dev)
>  }
>  
>  #ifdef CONFIG_PM
> -static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state)
> +static int bcma_suspend(struct device *dev)

All functions in host_pci.c start with bcma_host_pci_ prefix. Can we
stick to that convention?

>  {
> -	/* Host specific */
> -	pci_save_state(dev);
> -	pci_disable_device(dev);
> -	pci_set_power_state(dev, pci_choose_state(dev, state));
> -
>  	return 0;
>  }
>  
> -static int bcma_host_pci_resume(struct pci_dev *dev)
> +static int bcma_resume(struct device *dev)

Same here. It does not refer to the type of the device parameter.

Gr. AvS

Re: [PATCH 4/5] brcmsmac: remove PCI suspend/resume from bcma driver

[Arend van Spriel]

On 01/13/2012 09:01 AM, Linus Torvalds wrote:
> 
> From: Linus Torvalds <torvalds@linux-foundation.org>
> Date: Thu, 12 Jan 2012 23:36:52 -0800
> 
> The brcmsmac driver isn't a PCI driver any more, it's a bcma one.  The
> PCI device has been resumed by the PCI driver (the generic PCI layer,
> really), we should be resuming just our own driver state.
> 
> Also add pr_debug() calls to show that we now actually get the
> suspend/resume events.
> 
> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I made similar change as well last night, but did not get to test it. I
will test this series instead.

Gr. AvS

Re: [PATCH 1/5] bcma: convert suspend/resume to pm_ops

[Rafał Miłecki]

W dniu 13 stycznia 2012 10:58 użytkownik Arend van Spriel
<arend@broadcom.com> napisał:
> On 01/13/2012 09:00 AM, Linus Torvalds wrote:
>>
>> From: Linus Torvalds <torvalds@linux-foundation.org>
>> Date: Thu, 12 Jan 2012 22:47:01 -0800
>>
>> .. and avoid doing th eunnecessary PCI operations - the PCI layer will do them for us.
>>
>> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
>> ---
>>  drivers/bcma/host_pci.c |   38 +++++++++++++-------------------------
>>  1 files changed, 13 insertions(+), 25 deletions(-)
>>
>> diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
>> index 443b83a2fd7a..3aee641c9b7b 100644
>> --- a/drivers/bcma/host_pci.c
>> +++ b/drivers/bcma/host_pci.c
>> @@ -235,38 +235,27 @@ static void bcma_host_pci_remove(struct pci_dev *dev)
>>  }
>>
>>  #ifdef CONFIG_PM
>> -static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state)
>> +static int bcma_suspend(struct device *dev)
>
> All functions in host_pci.c start with bcma_host_pci_ prefix. Can we
> stick to that convention?

/me agrees
Would be nice

-- 
Rafał

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Rafał Miłecki]

W dniu 13 stycznia 2012 08:59 użytkownik Linus Torvalds
<torvalds@linux-foundation.org> napisał:
>
> So here are five cleanup/fix patches that try to make the bcma and
> brcmsmac suspend/resume situation look better.
>
> The changes do:
>
>  - use the modern PCI suspend/resume model, and let the PCI layer handle
>   the actual standard power state changes.
>
>  - clean up the BCMA suspend/resume infrastructure a bit in general.
>
>  - actually hook the BCMA suspend/resume callbacks up to the
>   suspend/resume event - it use to be that a bcma driver could set its
>   suspend/resume routines, but nothing would ever call them.
>
>  - and Rafał's bcma window invalidation
>
> Comments? This gets suspend/resume working for me at least once. I'm not
> going to try to hang my machine again until after I have gotten this sent
> out.
>
> Does this work for others?

I have Asus netbook with BCM4313 since a week, so I'll able to test
this. Just give me a day when I'm back home.

Could we rearrange order of patches to make
bcma: invalidate the mapped window over suspend/resume
this first one and add stable as CC? What do you think about this?

-- 
Rafał

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Arend van Spriel]

[-- Attachment #1: Type: text/plain, Size: 5447 bytes --]

On 01/13/2012 08:59 AM, Linus Torvalds wrote:
> 
> So here are five cleanup/fix patches that try to make the bcma and 
> brcmsmac suspend/resume situation look better.
> 
> The changes do:
> 
>  - use the modern PCI suspend/resume model, and let the PCI layer handle 
>    the actual standard power state changes.
> 
>  - clean up the BCMA suspend/resume infrastructure a bit in general.
> 
>  - actually hook the BCMA suspend/resume callbacks up to the 
>    suspend/resume event - it use to be that a bcma driver could set its 
>    suspend/resume routines, but nothing would ever call them.
> 
>  - and Rafał's bcma window invalidation
> 
> Comments? This gets suspend/resume working for me at least once. I'm not 
> going to try to hang my machine again until after I have gotten this sent 
> out.
> 
> Does this work for others?
> 
>                Linus
> 

I have a Dell Latitude E6410 over here. I applied the patches to

commit 099469502f62fbe0d7e4f0b83a2f22538367f734
Merge: 7c17d86 35f1526
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Thu Jan 12 20:42:54 2012 -0800

    Merge branch 'akpm' (aka "Andrew's patch-bomb, take two")

Upon suspend my laptop hangs (see trace below pulled from serial
console). I do not see the pr_debug in the suspend function (compiled
with -DDEBUG). Unfortunately the same happens when I don't insert bcma
and brcmsmac. I attached the kernel configuration.

Normally, the power button led will flash in suspend mode, but it stays
active and I have to force a powerdown (holding the power button).

So for now I can't say the patches are good or bad for that matter.

Gr. AvS

[  816.878395] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800,
rev 0x22, class 0x0)
[  816.886898] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812,
rev 0x17, class 0x0)
[  816.895559] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev
0x0F, class 0x0)
[  816.937118] bcma: Bus registered
[  825.953621] cfg80211: Calling CRDA to update world regulatory domain
[  854.763733] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17
[  854.937773] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[  854.938929] brcms_module_init: register returned 0
[  854.939332] cfg80211: Calling CRDA for country: US
[  854.942730] cfg80211: Regulatory domain changed to country: US
[  856.045618] udev[473]: renamed network interface wlan0 to wlan2
[  856.072472] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled:
false (implement)
[  856.092191] ieee80211 phy0: brcms_ops_config: change power-save mode:
false (implement)
[  856.103216] ADDRCONF(NETDEV_UP): wlan2: link is not ready
[  856.943778] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48)
on phy0
[  858.487656] cfg80211: Found new beacon on frequency: 5745 MHz (Ch
149) on phy0
[  858.569901] cfg80211: Found new beacon on frequency: 5765 MHz (Ch
153) on phy0
[  872.794509] wlan2: authenticate with c0:c1:c0:04:b8:2c (try 1)
[  872.802028] wlan2: authenticated
[  872.805298] wlan2: associate with c0:c1:c0:04:b8:2c (try 1)
[  872.814451] wlan2: RX AssocResp from c0:c1:c0:04:b8:2c (capab=0x411
status=0 aid=2)
[  872.822164] wlan2: associated
[  872.825143] wlan2: moving STA c0:c1:c0:04:b8:2c to state 1
[  872.830643] wlan2: moving STA c0:c1:c0:04:b8:2c to state 2
[  872.836126] wlan2: moving STA c0:c1:c0:04:b8:2c to state 3
[  872.842363] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled:
true (implement)
[  872.850202] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed:
associated
[  872.857249] ieee80211 phy0: changing basic rates failed: -22
[  872.862902] ieee80211 phy0: brcms_ops_bss_info_changed: arp
filtering: enabled true, count 0 (implement)
[  872.872612] ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[  872.873311] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not
AMPDU
[  872.885340] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not
AMPDU
[  876.352453] ieee80211 phy0: brcms_ops_bss_info_changed: arp
filtering: enabled true, count 1 (implement)
[  883.711301] wlan2: no IPv6 routers present
[  979.497669] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[  979.508400] EXT4-fs (sda7): re-mounted. Opts: commit=0
[  980.899784] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled:
false (implement)
[  980.907761] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed:
disassociated
[  980.915061] ieee80211 phy0: brcms_ops_bss_info_changed: arp
filtering: enabled false, count 1 (implement)
[  980.924656] wlan2: deauthenticating from c0:c1:c0:04:b8:2c by local
choice (reason=3)
[  980.932675] wlan2: moving STA c0:c1:c0:04:b8:2c to state 2
[  980.938171] wlan2: moving STA c0:c1:c0:04:b8:2c to state 1
[  980.943692] wlan2: moving STA c0:c1:c0:04:b8:2c to state 0
[  980.949462] cfg80211: All devices are disconnected, going to restore
regulatory settings
[  980.957590] cfg80211: Restoring regulatory settings
[  980.962491] cfg80211: Calling CRDA to update world regulatory domain
[  981.567922] cfg80211: World regulatory domain updated:
[  982.312893] PM: Syncing filesystems ... done.
[  982.356261] PM: Preparing system for mem sleep
[  982.371219] Freezing user space processes ... (elapsed 0.01 seconds)
done.
[  982.390543] Freezing remaining freezable tasks ... (elapsed 0.01
seconds) done.
[  982.410514] PM: Entering mem sleep
[  982.414712] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  982.420182] sd 0:0:0:0: [sda] Stopping disk

[-- Attachment #2: v3.2-config --]
[-- Type: text/plain, Size: 91800 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.2.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-testing-sdiofix"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED=y
# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_WANT_INTEL_MID is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set
# CONFIG_X86_32_IRIS is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
# CONFIG_LGUEST_GUEST is not set
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=m
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_HIGHPTE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_TEST_SUSPEND=y
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=m
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_APEI=y
# CONFIG_ACPI_APEI_GHES is not set
# CONFIG_ACPI_APEI_PCIEAER is not set
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_SFI=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_ALIX is not set
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
# CONFIG_NF_CONNTRACK_SNMP is not set
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
# CONFIG_NETFILTER_XT_MATCH_IPVS is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_SET is not set
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
# CONFIG_IP_VS_PE_SIP is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
# CONFIG_IP_NF_MATCH_RPFILTER is not set
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
# CONFIG_IP6_NF_MATCH_RPFILTER is not set
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
# CONFIG_L2TP_V3 is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
CONFIG_PHONET=m
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_6LOWPAN is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
# CONFIG_DMA_SHARED_BUFFER is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
# CONFIG_IWMC3200TOP is not set

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_MVSAS_DEBUG=y
# CONFIG_SCSI_MVSAS_TASKLET is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
CONFIG_SCSI_DH_HP_SW=m
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=m
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=m
# CONFIG_PATA_ATP867X is not set
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MARVELL=m
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=m
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_MPIIX=m
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
CONFIG_MII=m
# CONFIG_IEEE802154_DRIVERS is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
# CONFIG_MACVTAP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
# CONFIG_BNX2X is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_DCA=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_NET_VENDOR_I825XX is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKGE_GENESIS is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
# CONFIG_NET_VENDOR_OKI is not set
CONFIG_ETHOC=m
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=m
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MICREL_PHY=m
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_TR is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_CDC_PHONET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
# CONFIG_BRCMFMAC is not set
CONFIG_BRCMDBG=y
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL1251 is not set
# CONFIG_WL12XX_MENU is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_VMXNET3=m
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=m
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=m
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_GPIO=m
# CONFIG_I2C_INTEL_MID is not set
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=m
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
CONFIG_GPIO_SCH=m
# CONFIG_GPIO_VX855 is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_LANGWELL=y
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_TEST_POWER=m
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_CORE is not set
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=m
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_KMS=y
CONFIG_DRM_I810=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_STUB_POULSBO is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_COMPRESS_OFFLOAD is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=m
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_FIREWIRE is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=m
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=m
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_MV is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
# CONFIG_USB_SERIAL_SSU100 is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_NOP_USB_XCEIV=m
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_DELL_NETBOOKS=m
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_MCE_INJ is not set
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
CONFIG_EDAC_E752X=m
# CONFIG_EDAC_I82875P is not set
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
CONFIG_INTEL_IOATDMA=m
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_RTS_PSTOR is not set
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_POHMELFS is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_DEBUG=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_VME_BUS is not set
# CONFIG_DX_SEP is not set
# CONFIG_IIO is not set
# CONFIG_XVMALLOC is not set
# CONFIG_ZRAM is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
# CONFIG_DELL_WMI_AIO is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_HP_ACCEL is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
# CONFIG_IDEAPAD_LAPTOP is not set
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WMI is not set
CONFIG_ACPI_WMI=y
CONFIG_MSI_WMI=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_ACPI_CMPC is not set
CONFIG_INTEL_IPS=m
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_INTEL_IOMMU is not set
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
# CONFIG_IMA is not set
# CONFIG_EVM is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="apparmor"
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_SALSA20_586 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
CONFIG_CORDIC=y
# CONFIG_MPILIB is not set
# CONFIG_DIGSIG is not set

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Linus Torvalds]

2012/1/13 Rafał Miłecki <zajec5@gmail.com>:
>
> I have Asus netbook with BCM4313 since a week, so I'll able to test
> this. Just give me a day when I'm back home.
>
> Could we rearrange order of patches to make
> bcma: invalidate the mapped window over suspend/resume
> this first one and add stable as CC? What do you think about this?

I don't think it is relevant for stable - partly because in stable the
bcma suspend/resume isn't wired up anyway, but mostly because if that
patch really wants to make it into stable, it really is a different
patch than the one I munged it into. The stable bcma doesn't have
bcma_bus_suspend() at all, so it goes into that pci-specific one like
your original email had it, where it's a complete hack.

Does it fix anything in stable?

                     Linus

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Linus Torvalds]

2012/1/13 Arend van Spriel <arend@broadcom.com>:
>
> I have a Dell Latitude E6410 over here. I applied the patches to
>
> commit 099469502f62fbe0d7e4f0b83a2f22538367f734
> Merge: 7c17d86 35f1526
> Author: Linus Torvalds <torvalds@linux-foundation.org>
> Date:   Thu Jan 12 20:42:54 2012 -0800
>
>    Merge branch 'akpm' (aka "Andrew's patch-bomb, take two")
>
> Upon suspend my laptop hangs (see trace below pulled from serial
> console). I do not see the pr_debug in the suspend function (compiled
> with -DDEBUG). Unfortunately the same happens when I don't insert bcma
> and brcmsmac. I attached the kernel configuration.

Ok, so it's not the bcma/brcmsmac drivers, and your hang seems to be
at suspend time.

There is at least one other suspend problem in the current merge
window, you may be hitting them. The one I know about is some oddity
with the machine check driver, so if you have CONFIG_X86_MCE enabled,
try compiling without it.

Also, try

    echo devices > /sys/power/pm_test
    echo mem > /sys/power/state

which doesn't do the "real" suspend, but only goes through the device
suspend. That often leaves more of a trace of what may have gone
wrong.

                         Linus

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Linus Torvalds]

2012/1/13 Arend van Spriel <arend@broadcom.com>:
>
> Upon suspend my laptop hangs (see trace below pulled from serial
> console). I do not see the pr_debug in the suspend function (compiled
> with -DDEBUG). Unfortunately the same happens when I don't insert bcma
> and brcmsmac. I attached the kernel configuration.

Ok, I note that you do have MCE enabled.

The MCE problems should be fixed in current -git, and so it might be
worth re-testing with that.

                   Linus

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Dominique Martinet]

Hi,

Sorry to hijack this thread, but I had the exact same problem Arend has
and disabling MCE fixed it.. Since it froze only after resume and it
didn't send anything to netconsole at this moment I've had this for some
time without any good debug info, so first is a thank you!

I'd like to try if the fix in current -git works, could you remind me
the exact tree name you call this?
I'm familiar with linux-2.6.git, wireless-testing.git, and
linux-next.git, but it's not resolved in linux-next.git not
linux-2.6.git's HEAD at the very least.

By the way, resume/suspend works with your patches over linux-next.git
with a bcm4313 on a eeepc1215b!

Regards,

-- 
Dominique Martinet | Asmadeus

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Rafał Miłecki]

2012/1/14 Dominique Martinet <asmadeus@codewreck.org>:
> By the way, resume/suspend works with your patches over linux-next.git
> with a bcm4313 on a eeepc1215b!

Do you mean hibernate, AKA suspend to disk? I've Asus EEEPC 1215B with
AMD E-450 and after
echo disk > /sys/power/state
it tries to hibernate, but resumes right after, before even stopping
CPU or disabling backlight.

-- 
Rafał

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Dominique Martinet]

[-- Attachment #1: Type: text/plain, Size: 1163 bytes --]

Hi,

Rafał Miłecki wrote on Sat, Jan 14, 2012 :
> 2012/1/14 Dominique Martinet <asmadeus@codewreck.org>:
> > By the way, resume/suspend works with your patches over linux-next.git
> > with a bcm4313 on a eeepc1215b!
> 
> Do you mean hibernate, AKA suspend to disk? I've Asus EEEPC 1215B with
> AMD E-450 and after
> echo disk > /sys/power/state
> it tries to hibernate, but resumes right after, before even stopping
> CPU or disabling backlight.

I was refering to suspend to ram, but it looks like hibernate works fine
as well with the same model (well, aside of the touchpad being unplugged
and the hard drive having been changed)
(FWIW, with MCE enabled, the computer hangs after an attempt to
synchronize SCSI cache and never gets out of hibernation nor powers off)


I'm attaching my working config file for reference. I use it on top of
http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git;a=commit;h=00c0c2419d5ea8e6c558e431cf03272cd18d9c02
(linux-next.git's head from yesterday) with the 5 patches from this
thread.

Also, if it resumes right after the suspend, doesn't dmesg say something
about it?

Regards,
-- 
Dominique Martinet | Asmadeus

[-- Attachment #2: config-noMCE --]
[-- Type: text/plain, Size: 105890 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.2.0 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_THROTTLING is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_KVMTOOL_TEST_ENABLE is not set
CONFIG_PARAVIRT_GUEST=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=4
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
# CONFIG_CLEANCACHE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_DEBUG_FUNC_TRACE=y
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_HOTPLUG_MEMORY=m
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_ERST_DEBUG=m
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_INET_UDP_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
# CONFIG_NETFILTER_XT_SET is not set

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETPORT=m
# CONFIG_IP_SET_HASH_NETIFACE is not set
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
# CONFIG_IP_NF_MATCH_RPFILTER is not set
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
# CONFIG_IP6_NF_MATCH_RPFILTER is not set
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
CONFIG_LAPB=m
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
CONFIG_PHONET=m
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_6LOWPAN is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
CONFIG_HAVE_BPF_JIT=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_DEBUG_MENU=y
# CONFIG_MAC80211_NOINLINE is not set
# CONFIG_MAC80211_VERBOSE_DEBUG is not set
# CONFIG_MAC80211_HT_DEBUG is not set
# CONFIG_MAC80211_TKIP_DEBUG is not set
# CONFIG_MAC80211_IBSS_DEBUG is not set
CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
# CONFIG_MAC80211_VERBOSE_TDLS_DEBUG is not set
# CONFIG_MAC80211_DEBUG_COUNTERS is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=m
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
# CONFIG_DMA_SHARED_BUFFER is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=m
# CONFIG_MTD_SWAP is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
CONFIG_MTD_NETtel=m
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
CONFIG_MTD_PCMCIA=m
# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
# CONFIG_MTD_LATCH_ADDR is not set

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0x0
CONFIG_MTD_NAND_ECC=m
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_BCH is not set
CONFIG_MTD_SM_COMMON=m
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_DENALI is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m

#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=m
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
# CONFIG_IWMC3200TOP is not set

#
# Texas Instruments shared transport line discipline
#
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=m

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=m
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
CONFIG_BLK_DEV_OPTI621=m
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_HPT366=m
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
CONFIG_BLK_DEV_IT8172=m
CONFIG_BLK_DEV_IT8213=m
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
CONFIG_BLK_DEV_TRM290=m
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
# CONFIG_PCMCIA_AHA152X is not set
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=m
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARASAN_CF=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NINJA32 is not set
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_RZ1000=m

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
# CONFIG_DM_THIN_PROVISIONING is not set
CONFIG_DM_MIRROR=m
# CONFIG_DM_RAID is not set
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
# CONFIG_ISCSI_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_MII=y
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
CONFIG_IFB=m
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_PCMCIA_NMCLAN is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=y
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_FUJITSU=y
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_ZNET is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_PCMCIA_PCNET is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_SEEQ=y
# CONFIG_SEEQ8005 is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
# CONFIG_SFC is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
# CONFIG_SKFP is not set
CONFIG_HIPPI=y
# CONFIG_ROADRUNNER is not set
CONFIG_NET_SB1000=m
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_MDIO_BITBANG=m
CONFIG_PPP=m
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_FILTER=y
# CONFIG_PPP_MPPE is not set
CONFIG_PPP_MULTILINK=y
# CONFIG_PPPOATM is not set
# CONFIG_PPPOE is not set
# CONFIG_PPTP is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_TR is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_CDC_PHONET is not set
CONFIG_USB_IPHETH=m
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
# CONFIG_B43LEGACY is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMDBG=y
# CONFIG_HOSTAP is not set
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
# CONFIG_IPW2200 is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
# CONFIG_IWLWIFI is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
# CONFIG_P54_PCI is not set
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
# CONFIG_RT2800PCI is not set
# CONFIG_RT2500USB is not set
# CONFIG_RT73USB is not set
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_LIB_DEBUGFS is not set
# CONFIG_RT2X00_DEBUG is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL1251 is not set
# CONFIG_WL12XX_MENU is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=m
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
CONFIG_IPWIRELESS=m
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=m
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=m
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_MANAGER is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
# CONFIG_RC_CORE is not set
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y

#
# Audio decoders, processors and mixers
#

#
# RDS decoders
#

#
# Video decoders
#

#
# Video and audio decoders
#

#
# MPEG video encoders
#

#
# Video encoders
#

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#

#
# Miscelaneous helper chips
#
CONFIG_VIDEO_VIVI=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
CONFIG_V4L_PCI_DRIVERS=y
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_SAA7164 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported SDMC DM1105 Adapters
#

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y

#
# Supported Earthsoft PT1 Adapters
#
# CONFIG_DVB_PT1 is not set

#
# Supported Mantis Adapters
#

#
# Supported nGene Adapters
#
# CONFIG_DVB_NGENE is not set

#
# Supported ddbridge ('Octopus') Adapters
#
# CONFIG_DVB_DDBRIDGE is not set

#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# Multistandard (satellite) frontends
#

#
# Multistandard (cable + terrestrial) frontends
#

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_CX22700=m
CONFIG_DVB_TDA1004X=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#

#
# ISDB-T (terrestrial) frontends
#

#
# Digital terrestrial only tuners/PLL
#

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_STUB_POULSBO is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PROGEAR=m
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_COMPRESS_OFFLOAD is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_HDMI=y
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
CONFIG_SND_HDA_CODEC_CA0132=y
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_FIREWIRE_SPEAKERS=m
# CONFIG_SND_ISIGHT is not set
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=m
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=m
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WACOM_POWER_SUPPLY=y
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_MV is not set
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=m
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_NOP_USB_XCEIV=m
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_DELL_NETBOOKS=m
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
CONFIG_INTEL_IOATDMA=m
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_HOST=m
# CONFIG_USBIP_DEBUG is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_RTS_PSTOR is not set
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_POHMELFS is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_DRM_NOUVEAU is not set

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_VME_BUS is not set
# CONFIG_DX_SEP is not set
# CONFIG_IIO is not set
CONFIG_XVMALLOC=y
CONFIG_ZRAM=m
# CONFIG_ZRAM_DEBUG is not set
# CONFIG_WLAGS49_H2 is not set
# CONFIG_WLAGS49_H25 is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_ACNTPC=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
# CONFIG_SPEAKUP_SYNTH_DECPC is not set
CONFIG_SPEAKUP_SYNTH_DTLK=m
CONFIG_SPEAKUP_SYNTH_KEYPC=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_ACPI_ASUS=m
CONFIG_TOPSTAR_LAPTOP=m
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_MXM_WMI is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_STATS is not set
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IRQ_REMAP is not set

#
# Remoteproc drivers (EXPERIMENTAL)
#

#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_XSHM is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=m
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=m
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS_ACL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_VHOST_NET=m
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
CONFIG_CORDIC=m
# CONFIG_MPILIB is not set
# CONFIG_DIGSIG is not set

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Arend van Spriel]

On 01/14/2012 04:50 AM, Linus Torvalds wrote:
> 2012/1/13 Arend van Spriel <arend@broadcom.com>:
>>
>> Upon suspend my laptop hangs (see trace below pulled from serial
>> console). I do not see the pr_debug in the suspend function (compiled
>> with -DDEBUG). Unfortunately the same happens when I don't insert bcma
>> and brcmsmac. I attached the kernel configuration.
> 
> Ok, I note that you do have MCE enabled.
> 
> The MCE problems should be fixed in current -git, and so it might be
> worth re-testing with that.
> 
>                    Linus
> 

Yep. I disabled it and rebuild a kernel. Unfortunately, during the
weekend I have other obligations. So I can give it a go on monday
morning (amsterdam time).

Gr. AvS

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Linus Torvalds]

On Sat, Jan 14, 2012 at 4:22 AM, Dominique Martinet
<asmadeus@codewreck.org> wrote:
>
> Sorry to hijack this thread, but I had the exact same problem Arend has
> and disabling MCE fixed it.. Since it froze only after resume and it
> didn't send anything to netconsole at this moment I've had this for some
> time without any good debug info, so first is a thank you!
>
> I'd like to try if the fix in current -git works, could you remind me
> the exact tree name you call this?


  git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

is the main tree. The old "linux-2.6" name is just a symlink alias to it.

The commit that should fix MCE is just a oneliner: commit a3301b751b19
("x86/mce: Fix CPU hotplug and suspend regression related to MCE").

> I'm familiar with linux-2.6.git, wireless-testing.git, and
> linux-next.git, but it's not resolved in linux-next.git not
> linux-2.6.git's HEAD at the very least.

If it's not resolved in linux-2.6, then you have a different problem.

Or, possibly, the mirroring hadn't quite happened yet when you fetched
it - so it's worth double-checking that you have that commit
a3301b751b19 in your tree. But kernel.org git mirroring has been
pretty fast now that it uses gitorious.

> By the way, resume/suspend works with your patches over linux-next.git
> with a bcm4313 on a eeepc1215b!

Good. So they probably didn't break anything. It's always hard to tell
with drivers: even if it's an "obvious fix", the old code may have
worked for random reasons, and fixing it then breaks.

But I do think the patches should be pretty safe. The PCI layer
generally does all the PCI-level suspend/resumes correctly, and
drivers that try to do it are more likely to mess it up than not (that
didn't use to be true long ago, which is why many drivers still do it
- legacy baggage).

                           Linus

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Dominique Martinet]

Hi,

Linus Torvalds wrote on Sat, Jan 14, 2012 :
> The commit that should fix MCE is just a oneliner: commit a3301b751b19
> ("x86/mce: Fix CPU hotplug and suspend regression related to MCE").

Right, I missed it. Suspend works as long as I don't use wireless
before.
I still get a warning:

[   30.256946] ------------[ cut here ]------------
[   30.256956] WARNING: at drivers/base/core.c:194
device_release+0x6a/0x73()
[   30.256960] Hardware name: 1215B
[   30.256963] Device 'machinecheck1' does not have a release()
function, it is broken and must be fixed.
[   30.256966] Modules linked in: tun ipv6 snd_hrtimer uinput fuse ext4
jbd2 crc16 ext2 mbcache loop kvm_amd kvm snd_hda_codec_realtek
snd_hda_codec_hdmi brcmsmac mac80211 brcmutil cfg80211 crc8 cordic
eeepc_wmi asus_wmi sparse_keymap rfkill pci_hotplug uvcvideo videodev
media v4l2_compat_ioctl32 evdev psmouse snd_hda_intel snd_hda_codec
snd_hwdep snd_seq snd_pcm k10temp i2c_piix4 snd_timer snd_seq_device
bcma radeon snd ttm drm_kms_helper soundcore drm snd_page_alloc
i2c_algo_bit i2c_core battery ac power_supply video wmi button processor
xfs exportfs dm_mod sg sd_mod crc_t10dif thermal ohci_hcd xhci_hcd
thermal_sys ahci libahci ehci_hcd libata usbcore scsi_mod usb_common
[last unloaded: scsi_wait_scan]
[   30.257049] Pid: 3468, comm: pm-suspend Tainted: G        W    3.2.0+ #3
[   30.257052] Call Trace:
[   30.257063]  [<ffffffff8102e4b1>] ? warn_slowpath_common+0x78/0x8c
[   30.257069]  [<ffffffff8102e566>] ? warn_slowpath_fmt+0x45/0x4a
[   30.257075]  [<ffffffff811a4be3>] ? add_uevent_var+0xd9/0xd9
[   30.257080]  [<ffffffff81246c6b>] ? device_release+0x6a/0x73
[   30.257086]  [<ffffffff811a4090>] ? kobject_release+0x48/0x5e
[   30.257093]  [<ffffffff8130b17d>] ? mce_cpu_callback+0xdf/0x175
[   30.257101]  [<ffffffff8104bb15>] ? notifier_call_chain+0x2e/0x5b
[   30.257106]  [<ffffffff8102fb59>] ? __cpu_notify+0x1b/0x30
[   30.257110]  [<ffffffff8102fb86>] ? cpu_notify_nofail+0x9/0x14
[   30.257116]  [<ffffffff812ff826>] ? _cpu_down+0x133/0x1f4
[   30.257122]  [<ffffffff8102fd0b>] ? disable_nonboot_cpus+0x58/0xf3
[   30.257127]  [<ffffffff8106ed71>] ? suspend_devices_and_enter+0xd7/0x1c4
[   30.257132]  [<ffffffff8106ef5d>] ? enter_state+0xff/0x10d
[   30.257138]  [<ffffffff8106e1b0>] ? state_store+0xb4/0x108
[   30.257144]  [<ffffffff81144a19>] ? sysfs_write_file+0xd3/0x10f
[   30.257149]  [<ffffffff810f3c96>] ? vfs_write+0xa6/0xf9
[   30.257154]  [<ffffffff810f3e8b>] ? sys_write+0x45/0x6b
[   30.257160]  [<ffffffff813150f9>] ? system_call_fastpath+0x16/0x1b
[   30.257165] ---[ end trace 527780f5547f85b2 ]---

but it does work.


brcmsmac seems to have a problem that looks like it's fixed in
wireless-next, after a suspend if it's been used then all network
operation hang (i.e. 'ip addr', something like resolving an host doesn't
work but doesn't hang either, modprobe -r brcmsmac hangs as well)
Here's the revelent information about this:

[  232.352927] ieee80211 phy0: wl0: wlc_coreinit: ucode did not self-suspend!
[  232.490867] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[  232.490877] ieee80211 phy0: wl0: psmdebug 0x00ff8f7f, phydebug 0x00000000, psm_brc 0x0000
[  232.587468] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[  232.587477] ieee80211 phy0: wl0: psmdebug 0x00ff8f7f, phydebug 0x00000000, psm_brc 0x0000
[  232.684150] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[  232.684159] ieee80211 phy0: wl0: psmdebug 0x00ff8f7f, phydebug 0x00000000, psm_brc 0x0000
[  232.780771] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[  232.780781] ieee80211 phy0: wl0: psmdebug 0x00ff8f7f, phydebug 0x00000000, psm_brc 0x0000
[  232.884260] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[  232.884271] ieee80211 phy0: wl0: psmdebug 0x00ff8f7f, phydebug 0x00000000, psm_brc 0x0000
[  232.987619] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[  232.987630] ieee80211 phy0: wl0: psmdebug 0x00ff8f7f, phydebug 0x00000000, psm_brc 0x0000
[  233.090996] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[  233.091007] ieee80211 phy0: wl0: psmdebug 0x00ff8f7f, phydebug 0x00000000, psm_brc 0x0000
[  233.194345] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[  233.194356] ieee80211 phy0: wl0: psmdebug 0x00ff8f7f, phydebug 0x00000000, psm_brc 0x0000
[  233.194380] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[  233.297619] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[  233.297630] ieee80211 phy0: wl0: psmdebug 0x00ff8f7f, phydebug 0x00000000, psm_brc 0x0000
[  233.297703] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[  233.297710] ieee80211 phy0: changing basic rates failed: -22
[  233.297715] ieee80211 phy0: brcms_ops_bss_info_changed: cqm change: threshold 0, hys 0  (implement)
[  233.297720] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[  233.297724] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
...
[  233.892239] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[  233.892256] ieee80211 phy0: wl0: psmdebug 0x00ff8f7f, phydebug 0x00000031, psm_brc 0x0000
[  233.988440] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[  233.988452] ieee80211 phy0: wl0: psmdebug 0x00ff8f7f, phydebug 0x00000000, psm_brc 0x0000
[  234.084714] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[  234.084725] ieee80211 phy0: wl0: psmdebug 0x00ff8f7f, phydebug 0x00000000, psm_brc 0x0000
[  234.180626] ieee80211 phy0: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
[  234.180637] ieee80211 phy0: wl0: psmdebug 0x00ff8f7f, phydebug 0x00000000, psm_brc 0x0000
[  234.180658] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  234.180668] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[  234.180677] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)

and when something hangs:

[  361.248353] INFO: task wpa_supplicant:9102 blocked for more than 120 seconds.
[  361.248362] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  361.248367] wpa_supplicant  D ffff880062d68400     0  9102      1 0x00000000
[  361.248375]  ffff880062d68400 0000000000000082 ffff88005f72df38 ffff8800580e27b0
[  361.248383]  0000000000012080 ffff88005f72dfd8 ffff88005f72dfd8 0000000000012080
[  361.248390]  ffff880062d68400 0000000000012080 0000000000012080 0000000000012080
[  361.248397] Call Trace:
[  361.248411]  [<ffffffff81313307>] ? __mutex_lock_common.clone.5+0x114/0x179
[  361.248432]  [<ffffffffa03bef8a>] ? cfg80211_wext_siwscan+0xbd/0x2dc [cfg80211]
[  361.248439]  [<ffffffff81313137>] ? mutex_lock+0x12/0x25
[  361.248458]  [<ffffffffa03f83c1>] ? ieee80211_request_scan+0x20/0x4e [mac80211]
[  361.248469]  [<ffffffffa03bf151>] ? cfg80211_wext_siwscan+0x284/0x2dc [cfg80211]
[  361.248477]  [<ffffffff812f910e>] ? ioctl_standard_iw_point+0x142/0x26f
[  361.248484]  [<ffffffff810e7982>] ? __kmalloc+0xd0/0xe2
[  361.248490]  [<ffffffff812f9199>] ? ioctl_standard_iw_point+0x1cd/0x26f
[  361.248501]  [<ffffffffa03beecd>] ? cfg80211_unlock_rdev+0x21/0x21 [cfg80211]
[  361.248507]  [<ffffffff812f937c>] ? ioctl_standard_call+0x7d/0xa4
[  361.248513]  [<ffffffff812f9c66>] ? iw_handler_get_private+0x4c/0x4c
[  361.248519]  [<ffffffff812f9c66>] ? iw_handler_get_private+0x4c/0x4c
[  361.248525]  [<ffffffff812f9c66>] ? iw_handler_get_private+0x4c/0x4c
[  361.248531]  [<ffffffff812f92ff>] ? call_commit_handler+0x31/0x31
[  361.248536]  [<ffffffff812f8a33>] ? wext_ioctl_dispatch+0x8b/0x194
[  361.248542]  [<ffffffff812f9452>] ? wext_handle_ioctl+0x33/0x69
[  361.248550]  [<ffffffff812887f4>] ? dev_ioctl+0x5db/0x620
[  361.248557]  [<ffffffff810c9c1d>] ? tlb_flush_mmu+0x37/0x50
[  361.248563]  [<ffffffff810f4d71>] ? fget_light+0x2e/0x77
[  361.248568]  [<ffffffff810f4d71>] ? fget_light+0x2e/0x77
[  361.248576]  [<ffffffff81273f67>] ? sock_ioctl+0x41/0x204
[  361.248582]  [<ffffffff811013bf>] ? do_vfs_ioctl+0x416/0x455
[  361.248588]  [<ffffffff81101449>] ? sys_ioctl+0x4b/0x72
[  361.248595]  [<ffffffff813150f9>] ? system_call_fastpath+0x16/0x1b


Since it looks fixed with linux-next and the patches I don't know if it
is really important to fix, but it could be that some of the patches
that were intended for linux-next would help with some minor changes.


Regards,
-- 
Dominique Martinet | Asmadeus

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Linus Torvalds]

On Sat, Jan 14, 2012 at 3:08 PM, Dominique Martinet
<asmadeus@codewreck.org> wrote:
>
> Right, I missed it. Suspend works as long as I don't use wireless
> before.

Ok. Your suspend hang may be related to the cfg80211_wext hang that is
apparently unrelated to the issues we saw.

> I still get a warning:
>
> [   30.256946] ------------[ cut here ]------------
> [   30.256956] WARNING: at drivers/base/core.c:194 device_release+0x6a/0x73()

Yes. This warning is annoying but harmless. We'll fix it some way
(possibly by just turning it back to a single line, like it used to
be), but for now you can just ignore it.

> brcmsmac seems to have a problem that looks like it's fixed in
> wireless-next, after a suspend if it's been used then all network
> operation hang (i.e. 'ip addr', something like resolving an host doesn't
> work but doesn't hang either, modprobe -r brcmsmac hangs as well)
> Here's the revelent information about this:
>
> [  361.248353] INFO: task wpa_supplicant:9102 blocked for more than 120 seconds.
> [  361.248362] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [  361.248367] wpa_supplicant  D ffff880062d68400     0  9102      1 0x00000000
> [  361.248397] Call Trace:
> [  361.248411]  [<ffffffff81313307>] ? __mutex_lock_common.clone.5+0x114/0x179
> [  361.248432]  [<ffffffffa03bef8a>] ? cfg80211_wext_siwscan+0xbd/0x2dc [cfg80211]
> [  361.248439]  [<ffffffff81313137>] ? mutex_lock+0x12/0x25
> [  361.248458]  [<ffffffffa03f83c1>] ? ieee80211_request_scan+0x20/0x4e [mac80211]

Ok, judging by the call trace this seems to be a generic wireless bug,
likely not a brcmsmac bug.  Presumably people like me (and obviously
wireless developers) avoid this by not using wpa_supplicant o
rsomething. You might want to enable LOCKDEP to verify - if it's a
deadlock (either direct, or ABBA) - lockdep should give you a big
splat immediately rather than having to wait for 2 minutes.

Linwille/David - can you please make sure the fix gets to my tree,
since it's apparently already ok in the development tree?

                     Linus

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Arend van Spriel]

On 01/14/2012 04:50 AM, Linus Torvalds wrote:
> 2012/1/13 Arend van Spriel <arend@broadcom.com>:
>>
>> Upon suspend my laptop hangs (see trace below pulled from serial
>> console). I do not see the pr_debug in the suspend function (compiled
>> with -DDEBUG). Unfortunately the same happens when I don't insert bcma
>> and brcmsmac. I attached the kernel configuration.
> 
> Ok, I note that you do have MCE enabled.
> 
> The MCE problems should be fixed in current -git, and so it might be
> worth re-testing with that.
> 
>                    Linus
> 

Hi Linus,

I build a kernel with MCE disabled and tested that. It still hung. I
decided run the kernel with nomodeset parameter to avoid framebuffer
issues. Now the suspend worked, but resume failed. Just heard a beep and
that was it. I will refresh the tree and build another kernel with MCE
enabled.

Also observed occasional long delay upon startup:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-07331-gb2a1efc (root@arend-vb-linux)
(gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #1 SMP Fri Jan 13
21:31:23 CET 2012
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[    0.000000]  BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cf65f000 (usable)
[    0.000000]  BIOS-e820: 00000000cf65f000 - 00000000cf67f000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cf67f000 - 00000000cf76f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf76f000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Notice: NX (Execute Disable) protection cannot be
enabled: non-PAE kernel!
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[    0.000000] last_pfn = 0xcf65f max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF0000000 write-back
[    0.000000]   3 base 100000000 mask FE0000000 write-back
[    0.000000]   4 base 120000000 mask FF0000000 write-back
[    0.000000]   5 base 12C000000 mask FFC000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000
(usable) ==> (reserved)
[    0.000000] found SMP MP-table at [c00f2200] f2200
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [c0096000] 96000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 37c1a000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 37428000 - 377fd004
[    0.000000] Move RAMDISK from 0000000037c1a000 - 0000000037fef003 to
37428000 - 377fd003
[    0.000000] ACPI: RSDP 000fe300 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT cf67de18 00064 (v01 DELL    E2      06222004
MSFT 00010013)
[    0.000000] ACPI: FACP cf75fc18 000F4 (v04 DELL    E2      06222004
MSFT 00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two
FACS tables! (20110623/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT -
0xCF76BF40/0x00000000CF76ED40, using 32 (20110623/tbfadt-489)
[    0.000000] ACPI: DSDT cf73e018 0A24E (v01 DELL    E2      00001001
INTL 20080729)
[    0.000000] ACPI: FACS cf76bf40 00040
[    0.000000] ACPI: APIC cf67cf18 0008C (v02 DELL    E2      06222004
MSFT 00010013)
[    0.000000] ACPI: TCPA cf76dd18 00032 (v02                 00000000
    00000000)
[    0.000000] ACPI: MCFG cf76dc98 0003C (v01 A M I  GMCH945. 06222004
MSFT 00000097)
[    0.000000] ACPI: HPET cf76dc18 00038 (v01 DELL    E2      00000001
ASL  00000061)
[    0.000000] ACPI: BOOT cf76db98 00028 (v01 DELL   E2       06222004
AMI  00010013)
[    0.000000] ACPI: SLIC cf766818 00176 (v03 DELL    E2      06222004
MSFT 00010013)
[    0.000000] ACPI: SSDT cf74d018 009F1 (v01  PmRef    CpuPm 00003000
INTL 20080729)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2430MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000cf65f
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009a
[    0.000000]     0: 0x00000100 -> 0x000cf65f
[    0.000000] On node 0 totalpages: 849385
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3946 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4861 pages used for memmap
[    0.000000]   HighMem zone: 617316 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009a000 -
000000000009b000
[    0.000000] PM: Registered nosave memory: 000000000009b000 -
00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[    0.000000] Allocating PCI resources starting at d0000000 (gap:
d0000000:28000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f5400000 s29952 r0 d23296
u524288
[    0.000000] pcpu-alloc: s29952 r0 d23296 u524288 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 842748
[    0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-07331-gb2a1efc
root=UUID=7051116f-03ec-4df3-a8ff-813fb03aec9f ro ignore_loglevel
console=tty0 console=ttyS0,115200 nomodeset no_console_suspend
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:000cf65f)
[    0.000000] Memory: 3357116k/3398012k available (4841k kernel code,
40424k reserved, 2278k data, 556k init, 2488708k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc16f4000 - 0xc177f000   ( 556 kB)
[    0.000000]       .data : 0xc14ba50e - 0xc16f3fc0   (2278 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14ba50e   (4841 kB)
[    0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f500a000 soft=f500c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 6815744 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2793.229 MHz processor.
[    0.000001] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5586.45 BogoMIPS (lpj=11172916)
[    0.010817] pid_max: default: 32768 minimum: 301
[    0.015520] Security Framework initialized
[    0.019689] AppArmor: AppArmor initialized
[    0.023878] Mount-cache hash table entries: 512
[    0.028574] Initializing cgroup subsys cpuacct
[    0.033081] Initializing cgroup subsys memory
[    0.037503] Initializing cgroup subsys devices
[    0.042011] Initializing cgroup subsys freezer
[    0.046518] Initializing cgroup subsys net_cls
[    0.051042] CPU: Physical Processor ID: 0
[    0.055116] CPU: Processor Core ID: 0
[    0.058827] using mwait in idle threads.
[    0.064089] ACPI: Core revision 20110623
[    0.073049] ftrace: allocating 20190 entries in 40 pages
[    0.083048] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.088911] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.134409] CPU0: Intel(R) Core(TM) i7 CPU       M 640  @ 2.80GHz
stepping 05
[    0.246713] Performance Events: PEBS fmt1+, Westmere events, Intel
PMU driver.
[    0.254187] CPUID marked event: 'bus cycles' unavailable
[    0.259547] ... version:                3
[    0.263743] ... bit width:              48
[    0.267890] ... generic registers:      4
[    0.271949] ... value mask:             0000ffffffffffff
[    0.279011] ... max period:             000000007fffffff
[    0.284369] ... fixed-purpose events:   3
[    0.288428] ... event mask:             000000070000000f
[    0.293915] CPU 1 irqstacks, hard=f4b4e000 soft=f4b58000
[    0.299274] Booting Node   0, Processors  #1
[    0.303474] smpboot cpu 1: start_ip = 96000
[    0.318218] Initializing CPU#1
[    0.341383] CPU 2 irqstacks, hard=f4b62000 soft=f4b64000
[    0.346745]  #2
[    0.348370] smpboot cpu 2: start_ip = 96000
[    0.362989] Initializing CPU#2
[    0.386195] CPU 3 irqstacks, hard=f4b6e000 soft=f4b70000
[    0.391557]  #3
[    0.393180] smpboot cpu 3: start_ip = 96000
[    0.407801] Initializing CPU#3
[    0.430931] Brought up 4 CPUs
[    0.433952] Total of 4 processors activated (22345.83 BogoMIPS).
[    0.442574] devtmpfs: initialized
[    0.446052] PM: Registering ACPI NVS region at cf67f000 (983040 bytes)
[    0.453333] print_constraints: dummy:
[    0.457165] RTC time: 13:52:08, date: 01/16/12
[    0.461685] NET: Registered protocol family 16
[    0.466229] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[    0.473852] ACPI: bus type pci registered
[    0.477960] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.487317] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.494149] PCI: Using MMCONFIG for extended config space
[    0.499596] PCI: Using configuration type 1 for base access
[    0.505220] dmi type 0xB1 record - unknown flag
[    0.510288] bio: create slab <bio-0> at 0
[    0.514393] ACPI: Added _OSI(Module Device)
[    0.518628] ACPI: Added _OSI(Processor Device)
[    0.523122] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.527876] ACPI: Added _OSI(Processor Aggregator Device)
[    0.534434] ACPI: EC: Look up EC in DSDT
[    0.542573] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.555797] ACPI: SSDT cf7eaa18 004B6 (v01  PmRef  Cpu0Ist 00003000
INTL 20080729)
[    0.563813] ACPI: Dynamic OEM Table Load:
[    0.568000] ACPI: SSDT   (null) 004B6 (v01  PmRef  Cpu0Ist 00003000
INTL 20080729)
[    0.575855] ACPI: SSDT cf7e8018 00891 (v01  PmRef  Cpu0Cst 00003001
INTL 20080729)
[    0.583852] ACPI: Dynamic OEM Table Load:
[    0.588039] ACPI: SSDT   (null) 00891 (v01  PmRef  Cpu0Cst 00003001
INTL 20080729)
[    0.595979] ACPI: SSDT cf7e9a98 00303 (v01  PmRef    ApIst 00003000
INTL 20080729)
[    0.604029] ACPI: Dynamic OEM Table Load:
[    0.608216] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000
INTL 20080729)
[    0.616042] ACPI: SSDT cf7e7d98 00119 (v01  PmRef    ApCst 00003000
INTL 20080729)
[    0.624061] ACPI: Dynamic OEM Table Load:
[    0.628245] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000
INTL 20080729)
[    0.637407] ACPI: Interpreter enabled
[    0.641126] ACPI: (supports S0 S3 S4 S5)
[    0.645374] ACPI: Using IOAPIC for interrupt routing
[    0.661754] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data =
0x930
[    0.669313] ACPI: No dock devices found.
[    0.673288] HEST: Table not found.
[    0.676743] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[    0.686201] \_SB_.PCI0:_OSC invalid UUID
[    0.690175] _OSC request data:1 8 1f
[    0.694136] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.700798] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.707457] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.714115] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[    0.721479] pci_root PNP0A08:00: host bridge window [mem
0xd0000000-0xfeafffff]
[    0.728865] PCI host bridge to bus 0000:00
[    0.733014] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.739241] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.745467] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[    0.752385] pci_bus 0000:00: root bus resource [mem
0xd0000000-0xfeafffff]
[    0.759309] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    0.765305] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[    0.771296] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.777484] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
[    0.783473] pci 0000:00:19.0: reg 10: [mem 0xe9600000-0xe961ffff]
[    0.789624] pci 0000:00:19.0: reg 14: [mem 0xe9680000-0xe9680fff]
[    0.795772] pci 0000:00:19.0: reg 18: [io  0x8040-0x805f]
[    0.801302] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.807470] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    0.813460] pci 0000:00:1a.0: reg 10: [mem 0xe9670000-0xe96703ff]
[    0.819703] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.825873] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    0.831857] pci 0000:00:1b.0: reg 10: [mem 0xe9660000-0xe9663fff 64bit]
[    0.838609] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.844774] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    0.850834] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.857003] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    0.863065] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.869233] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[    0.875295] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.881465] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[    0.887526] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.893704] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    0.899692] pci 0000:00:1d.0: reg 10: [mem 0xe9650000-0xe96503ff]
[    0.905934] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.912097] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.918144] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
[    0.924232] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[    0.930223] pci 0000:00:1f.2: reg 10: [io  0x8090-0x8097]
[    0.935678] pci 0000:00:1f.2: reg 14: [io  0x8080-0x8083]
[    0.941133] pci 0000:00:1f.2: reg 18: [io  0x8070-0x8077]
[    0.946589] pci 0000:00:1f.2: reg 1c: [io  0x8060-0x8063]
[    0.952045] pci 0000:00:1f.2: reg 20: [io  0x8020-0x803f]
[    0.957501] pci 0000:00:1f.2: reg 24: [mem 0xe9640000-0xe96407ff]
[    0.963703] pci 0000:00:1f.2: PME# supported from D3hot
[    0.968997] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    0.974982] pci 0000:00:1f.3: reg 10: [mem 0xe9630000-0xe96300ff 64bit]
[    0.981669] pci 0000:00:1f.3: reg 20: [io  0x8000-0x801f]
[    0.987162] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    0.993153] pci 0000:00:1f.6: reg 10: [mem 0xe9620000-0xe9620fff 64bit]
[    0.999935] pci 0000:01:00.0: [10de:0a6c] type 0 class 0x000300
[    1.005906] pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
[    1.012054] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff
64bit pref]
[    1.019153] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff
64bit pref]
[    1.026249] pci 0000:01:00.0: reg 24: [io  0x7000-0x707f]
[    1.031701] pci 0000:01:00.0: reg 30: [mem 0xe3000000-0xe307ffff pref]
[    1.038317] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[    1.044290] pci 0000:01:00.1: reg 10: [mem 0xe3080000-0xe3083fff]
[    1.050504] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.055777] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    1.061916] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe30fffff]
[    1.068802] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.074079] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    1.080220] pci 0000:00:1c.0:   bridge window [mem 0xe8200000-0xe95fffff]
[    1.087179] pci 0000:03:00.0: [14e4:4353] type 0 class 0x000280
[    1.093213] pci 0000:03:00.0: reg 10: [mem 0xe6e00000-0xe6e03fff 64bit]
[    1.100131] pci 0000:03:00.0: supports D1 D2
[    1.104450] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    1.110764] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.116039] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    1.122181] pci 0000:00:1c.1:   bridge window [mem 0xe6e00000-0xe81fffff]
[    1.129141] pci 0000:04:00.0: [1180:e476] type 2 class 0x000607
[    1.135172] pci 0000:04:00.0: reg 10: [mem 0xe5940000-0xe5940fff]
[    1.141431] pci 0000:04:00.0: supports D1 D2
[    1.145753] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.152508] pci 0000:04:00.1: [1180:e822] type 0 class 0x000805
[    1.158542] pci 0000:04:00.1: reg 10: [mem 0xe5930000-0xe59300ff]
[    1.164884] pci 0000:04:00.1: supports D1 D2
[    1.169204] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    1.175960] pci 0000:04:00.4: [1180:e832] type 0 class 0x000c00
[    1.181991] pci 0000:04:00.4: reg 10: [mem 0xe5900000-0xe59007ff]
[    1.188331] pci 0000:04:00.4: supports D1 D2
[    1.192652] pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[    1.207903] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    1.213185] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
[    1.219328] pci 0000:00:1c.2:   bridge window [mem 0xe3100000-0xe59fffff]
[    1.226255] pci_bus 0000:05: [bus 05-08] partially hidden behind
bridge 0000:04 [bus 04-05]
[    1.234712] pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
[    1.239989] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    1.246132] pci 0000:00:1c.3:   bridge window [mem 0xe5a00000-0xe6dfffff]
[    1.253165] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive
decode)
[    1.260268] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7]
(subtractive decode)
[    1.268236] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff]
(subtractive decode)
[    1.276203] pci 0000:00:1e.0:   bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[    1.284867] pci 0000:00:1e.0:   bridge window [mem
0xd0000000-0xfeafffff] (subtractive decode)
[    1.293558] pci_bus 0000:00: on NUMA node 0
[    1.297792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.303885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    1.310325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.316805] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.323240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.329677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    1.336114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    1.342600] \_SB_.PCI0:_OSC invalid UUID
[    1.346574] _OSC request data:1 1f 1f
[    1.350627]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.356358] \_SB_.PCI0:_OSC invalid UUID
[    1.360332] _OSC request data:1 0 1d
[    1.366005]  pci0000:00: ACPI _OSC request failed (AE_ERROR),
returned control mask: 0x1d
[    1.374233] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.383094] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[    1.389084] PCI: root bus 3f: using default resources
[    1.394200] PCI host bridge to bus 0000:3f
[    1.398349] pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
[    1.404575] pci_bus 0000:3f: root bus resource [mem
0x00000000-0xffffffff]
[    1.411498] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
[    1.417477] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
[    1.423458] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
[    1.429436] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
[    1.435414] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
[    1.441392] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
[    1.447378] pci_bus 0000:3f: on NUMA node 0
[    1.451617]  pci0000:3f: Requesting ACPI _OSC control (0x1d)
[    1.457322]  pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND),
returned control mask: 0x1d
[    1.465896] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.472273] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[    1.480406] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[    1.488543] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12
14 15)
[    1.496341] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[    1.504473] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 *3 4 5 6 7 10 12
14 15)
[    1.512267] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12
14 15) *0, disabled.
[    1.521326] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[    1.529455] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12
14 15) *0, disabled.
[    1.538538] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.546683] vgaarb: loaded
[    1.549442] vgaarb: bridge control possible 0000:01:00.0
[    1.554860] SCSI subsystem initialized
[    1.558688] libata version 3.00 loaded.
[    1.562602] usbcore: registered new interface driver usbfs
[    1.568142] usbcore: registered new interface driver hub
[    1.573515] usbcore: registered new device driver usb
[    1.578698] wmi: Mapper loaded
[    1.581805] PCI: Using ACPI for IRQ routing
[    1.588192] PCI: pci_cache_line_size set to 64 bytes
[    1.593319] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[    1.599537] reserve RAM buffer: 00000000cf65f000 - 00000000cfffffff
[    1.606060] NetLabel: Initializing
[    1.609760] NetLabel:  domain hash size = 128
[    1.614168] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.619188] NetLabel:  unlabeled traffic allowed by default
[    1.624837] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.631639] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.639532] Switching to clocksource hpet
[    1.648052] AppArmor: AppArmor Filesystem Enabled
[    1.652837] pnp: PnP ACPI init
[    1.655960] ACPI: bus type pnp registered
[    1.660275] pnp 00:00: [bus 00-3e]
[    1.663738] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.668500] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.672652] pnp 00:00: [io  0x0d00-0xffff window]
[    1.677412] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.682865] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.688316] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.693768] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.699219] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.704669] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.710121] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.715570] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.721021] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.726473] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.731926] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.737377] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.742827] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.748280] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.753733] pnp 00:00: [mem 0xd0000000-0xfeafffff window]
[    1.759184] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.764682] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[    1.771981] pnp 00:01: [io  0x0000-0x001f]
[    1.776135] pnp 00:01: [io  0x0081-0x0091]
[    1.780287] pnp 00:01: [io  0x0093-0x009f]
[    1.784440] pnp 00:01: [io  0x00c0-0x00df]
[    1.788593] pnp 00:01: [dma 4]
[    1.791717] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.798299] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.803153] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.809783] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.814643] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.821226] pnp 00:04: [io  0x00f0]
[    1.824779] pnp 00:04: [irq 13]
[    1.827992] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.834574] pnp 00:05: [io  0x002e-0x002f]
[    1.838726] pnp 00:05: [io  0x004e-0x004f]
[    1.842878] pnp 00:05: [io  0x0061]
[    1.846420] pnp 00:05: [io  0x0063]
[    1.849963] pnp 00:05: [io  0x0065]
[    1.853508] pnp 00:05: [io  0x0067]
[    1.857054] pnp 00:05: [io  0x0070]
[    1.860600] pnp 00:05: [io  0x0080]
[    1.864146] pnp 00:05: [io  0x0092]
[    1.867691] pnp 00:05: [io  0x00b2-0x00b3]
[    1.871843] pnp 00:05: [io  0x0680-0x069f]
[    1.875995] pnp 00:05: [io  0x1000-0x1003]
[    1.880144] pnp 00:05: [io  0x1004-0x1013]
[    1.884296] pnp 00:05: [io  0xffff]
[    1.887842] pnp 00:05: [io  0x0400-0x047f]
[    1.891992] pnp 00:05: [io  0x0500-0x057f]
[    1.896144] pnp 00:05: [io  0x164e-0x164f]
[    1.900330] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.906304] system 00:05: [io  0x1000-0x1003] has been reserved
[    1.912276] system 00:05: [io  0x1004-0x1013] has been reserved
[    1.918248] system 00:05: [io  0xffff] has been reserved
[    1.923611] system 00:05: [io  0x0400-0x047f] has been reserved
[    1.929582] system 00:05: [io  0x0500-0x057f] has been reserved
[    1.935552] system 00:05: [io  0x164e-0x164f] has been reserved
[    1.941522] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.948367] pnp 00:06: [io  0x0070-0x0077]
[    1.952523] pnp 00:06: [irq 8]
[    1.955648] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.962230] pnp 00:07: [io  0x0060]
[    1.965777] pnp 00:07: [io  0x0064]
[    1.969325] pnp 00:07: [irq 1]
[    1.972450] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.980087] pnp 00:08: [io  0x03f8-0x03ff]
[    1.984244] pnp 00:08: [irq 4]
[    1.987398] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.994883] pnp 00:09: [io  0x0378-0x037b]
[    1.999041] pnp 00:09: [irq 7]
[    2.002181] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[    2.008768] pnp 00:0a: [irq 12]
[    2.011984] pnp 00:0a: Plug and Play ACPI device, IDs DLL040a PNP0f13
(active)
[    2.019424] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[    2.024273] pnp 00:0b: [mem 0xfed10000-0xfed13fff]
[    2.029118] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[    2.033964] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[    2.038810] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[    2.043654] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[    2.048499] pnp 00:0b: [mem 0xfed90000-0xfed8ffff disabled]
[    2.054122] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[    2.058965] pnp 00:0b: [mem 0xff000000-0xffffffff]
[    2.063810] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[    2.068654] pnp 00:0b: [mem 0xe96c0000-0xe96c0fff]
[    2.073532] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    2.080199] system 00:0b: [mem 0xfed10000-0xfed13fff] has been reserved
[    2.086864] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    2.093526] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    2.100190] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    2.106853] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    2.113515] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    2.120178] system 00:0b: [mem 0xff000000-0xffffffff] could not be
reserved
[    2.127191] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be
reserved
[    2.134202] system 00:0b: [mem 0xe96c0000-0xe96c0fff] has been reserved
[    2.140866] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.147756] pnp 00:0c: [irq 23]
[    2.150977] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
[    2.158645] pnp 00:0d: [bus 3f]
[    2.161874] pnp 00:0d: Plug and Play ACPI device, IDs PNP0a03 (active)
[  118.756113] pnp: PnP ACPI: found 14 devices
[  118.760526] ACPI: ACPI bus type pnp unregistered
[  118.801225] PCI: max bus depth: 2 pci_try_num: 3
[  118.805957] pci 0000:00:1c.3: BAR 15: assigned [mem
0xe9700000-0xe98fffff 64bit pref]
[  118.813845] pci 0000:00:1c.2: BAR 15: assigned [mem
0xec000000-0xefffffff pref]
[  118.821214] pci 0000:00:1c.1: BAR 15: assigned [mem
0xe9900000-0xe9afffff 64bit pref]
[  118.829103] pci 0000:00:1c.0: BAR 15: assigned [mem
0xe9b00000-0xe9cfffff 64bit pref]
[  118.836989] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[  118.842266] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[  118.848411] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe30fffff]
[  118.855248] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[  118.860526] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[  118.866673] pci 0000:00:1c.0:   bridge window [mem 0xe8200000-0xe95fffff]
[  118.873514] pci 0000:00:1c.0:   bridge window [mem
0xe9b00000-0xe9cfffff 64bit pref]
[  118.881320] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[  118.886601] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[  118.894453] pci 0000:00:1c.1:   bridge window [mem 0xe6e00000-0xe81fffff]
[  118.901292] pci 0000:00:1c.1:   bridge window [mem
0xe9900000-0xe9afffff 64bit pref]
[  118.909098] pci 0000:04:00.0: BAR 16: can't assign mem (size 0x4000000)
[  118.915764] pci 0000:04:00.0: BAR 15: assigned [mem
0xec000000-0xefffffff pref]
[  118.923133] pci 0000:04:00.0: BAR 14: assigned [io  0x2000-0x20ff]
[  118.929363] pci 0000:04:00.0: BAR 13: assigned [io  0x2400-0x24ff]
[  118.935595] pci 0000:04:00.0: CardBus bridge to [bus 05-08]
[  118.941220] pci 0000:04:00.0:   bridge window [io  0x2400-0x24ff]
[  118.947370] pci 0000:04:00.0:   bridge window [io  0x2000-0x20ff]
[  118.953517] pci 0000:04:00.0:   bridge window [mem
0xec000000-0xefffffff pref]

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Arend van Spriel]

[-- Attachment #1: Type: text/plain, Size: 1729 bytes --]

On 01/16/2012 03:00 PM, Arend van Spriel wrote:
> On 01/14/2012 04:50 AM, Linus Torvalds wrote:
>> 2012/1/13 Arend van Spriel <arend@broadcom.com>:
>>>
>>> Upon suspend my laptop hangs (see trace below pulled from serial
>>> console). I do not see the pr_debug in the suspend function (compiled
>>> with -DDEBUG). Unfortunately the same happens when I don't insert bcma
>>> and brcmsmac. I attached the kernel configuration.
>>
>> Ok, I note that you do have MCE enabled.
>>
>> The MCE problems should be fixed in current -git, and so it might be
>> worth re-testing with that.
>>
>>                    Linus
>>
> 
> Hi Linus,
> 
> I build a kernel with MCE disabled and tested that. It still hung. I
> decided run the kernel with nomodeset parameter to avoid framebuffer
> issues. Now the suspend worked, but resume failed. Just heard a beep and
> that was it. I will refresh the tree and build another kernel with MCE
> enabled.
> 

I build a new kernel with MCE enabled. Same issue. I did not load bcma
or brcmsmac yet. Attached is trace I could pull from the kernel log
(str-test-*).

I also tried the pm_test and attached the trace for that
(str-devices-*). No bcma/brcmsmac test done with it yet.

Gr. AvS

-----------------------------------
version: 3.2.0-08699-ga93ce74

a93ce74 bcma: invalidate the mapped window over suspend/resume
d205a29 brcmsmac: remove PCI suspend/resume from bcma driver
310c9f8 bcma: connect the bcma bus suspend/resume to the bcma driver
suspend/res
6f55bd0 bcma: add stub for bcma_bus suspend()
83d836c bcma: convert suspend/resume to pm_ops
53999bf error: implicit declaration of function 'module_flags_taint'
122804e Merge branch 'v4l_for_linus' of
git://git.kernel.org/pub/scm/linux/kerne


[-- Attachment #2: str-test-3.2.0-08699-ga93ce74.log --]
[-- Type: text/plain, Size: 20421 bytes --]

Jan 16 16:12:18 arend-lp-dev kernel: [   18.677791] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan 16 16:12:18 arend-lp-dev kernel: [   18.750899] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
Jan 16 16:12:18 arend-lp-dev kernel: [   19.527827] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Jan 16 16:12:19 arend-lp-dev kernel: [   19.536249] EXT4-fs (sda7): re-mounted. Opts: commit=0
Jan 16 16:12:25 arend-lp-dev kernel: [   26.004187] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Jan 16 16:12:25 arend-lp-dev kernel: [   26.012413] EXT4-fs (sda7): re-mounted. Opts: commit=0
Jan 16 16:12:26 arend-lp-dev kernel: [   27.277853] PM: Syncing filesystems ... done.
Jan 16 16:12:26 arend-lp-dev kernel: [   27.282818] PM: Preparing system for mem sleep
Jan 16 16:12:51 arend-lp-dev kernel: [   27.287317] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jan 16 16:12:51 arend-lp-dev kernel: [   27.307802] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jan 16 16:12:51 arend-lp-dev kernel: [   27.327823] PM: Entering mem sleep
Jan 16 16:12:51 arend-lp-dev kernel: [   27.331518] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jan 16 16:12:51 arend-lp-dev kernel: [   27.401472] sd 0:0:0:0: [sda] Stopping disk
Jan 16 16:12:51 arend-lp-dev kernel: [   28.419112] serial 00:08: disabled
Jan 16 16:12:51 arend-lp-dev kernel: [   28.419347] serial 00:08: wake-up capability disabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [   28.427126] ACPI handle has no context!
Jan 16 16:12:51 arend-lp-dev kernel: [   28.485022] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [   28.866326] ACPI handle has no context!
Jan 16 16:12:51 arend-lp-dev kernel: [   28.882283] PM: suspend of devices complete after 1553.559 msecs
Jan 16 16:12:51 arend-lp-dev kernel: [   28.882655] PM: suspend devices took 1.556 seconds
Jan 16 16:12:51 arend-lp-dev kernel: [   28.883343] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [   28.898388] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [   28.914277] PM: late suspend of devices complete after 31.374 msecs
Jan 16 16:12:51 arend-lp-dev kernel: [   28.914834] ACPI: Preparing to enter system sleep state S3
Jan 16 16:12:51 arend-lp-dev kernel: [   28.934410] PM: Saving platform NVS memory
Jan 16 16:12:51 arend-lp-dev kernel: [   28.935334] Disabling non-boot CPUs ...
Jan 16 16:12:51 arend-lp-dev kernel: [   29.038021] CPU 1 is now offline
Jan 16 16:12:51 arend-lp-dev kernel: [   29.038513] ------------[ cut here ]------------
Jan 16 16:12:51 arend-lp-dev kernel: [   29.038813] WARNING: at drivers/base/core.c:194 device_release+0x76/0x80()
Jan 16 16:12:51 arend-lp-dev kernel: [   29.039225] Hardware name: Latitude E6410
Jan 16 16:12:51 arend-lp-dev kernel: [   29.039499] Device 'machinecheck1' does not have a release() function, it is broken and must be fixed.
Jan 16 16:12:51 arend-lp-dev kernel: [   29.040054] Modules linked in: binfmt_misc snd_hda_codec_hdmi snd_hda_codec_idt nouveau snd_hda_intel snd_hda_codec ttm snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd drm_kms_helper psmouse serio_raw dell_laptop drm intel_agp intel_gtt dcdbas mxm_wmi dell_wmi video sparse_keymap soundcore snd_page_alloc intel_ips agpgart firewire_ohci firewire_core crc_itu_t ahci libahci sdhci_pci sdhci mmc_core e1000e
Jan 16 16:12:51 arend-lp-dev kernel: [   29.044752] Pid: 1272, comm: pm-suspend Not tainted 3.2.0-08699-ga93ce74 #1
Jan 16 16:12:51 arend-lp-dev kernel: [   29.045169] Call Trace:
Jan 16 16:12:51 arend-lp-dev kernel: [   29.045367]  [<c10305e2>] warn_slowpath_common+0x72/0xa0
Jan 16 16:12:51 arend-lp-dev kernel: [   29.045702]  [<c131dfa6>] ? device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.046022]  [<c131dfa6>] ? device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.046341]  [<c10306b3>] warn_slowpath_fmt+0x33/0x40
Jan 16 16:12:51 arend-lp-dev kernel: [   29.046663]  [<c131dfa6>] device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.046975]  [<c1273e2a>] kobject_release+0x3a/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.047289]  [<c1273d17>] kobject_put+0x27/0x60
Jan 16 16:12:51 arend-lp-dev kernel: [   29.047586]  [<c1273de2>] ? kobject_del+0x22/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [   29.047894]  [<c131e975>] ? device_del+0x125/0x150
Jan 16 16:12:51 arend-lp-dev kernel: [   29.048207]  [<c131ddf4>] put_device+0x14/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [   29.048502]  [<c131e9b7>] device_unregister+0x17/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [   29.048830]  [<c14a5256>] mce_cpu_callback+0xc3/0x155
Jan 16 16:12:51 arend-lp-dev kernel: [   29.049156]  [<c14b64a5>] notifier_call_chain+0x45/0x60
Jan 16 16:12:51 arend-lp-dev kernel: [   29.049493]  [<c1053e1e>] __raw_notifier_call_chain+0x1e/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [   29.049853]  [<c1031fa4>] __cpu_notify+0x24/0x40
Jan 16 16:12:51 arend-lp-dev kernel: [   29.050158]  [<c10320cc>] cpu_notify_nofail+0x1c/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [   29.050485]  [<c149929d>] _cpu_down+0xdd/0x250
Jan 16 16:12:51 arend-lp-dev kernel: [   29.050780]  [<c10321b4>] disable_nonboot_cpus+0x74/0x110
Jan 16 16:12:51 arend-lp-dev kernel: [   29.051124]  [<c1083183>] suspend_devices_and_enter+0x173/0x2e0
Jan 16 16:12:51 arend-lp-dev kernel: [   29.051494]  [<c108342c>] enter_state+0x13c/0x160
Jan 16 16:12:51 arend-lp-dev kernel: [   29.051802]  [<c10820aa>] state_store+0x8a/0x110
Jan 16 16:12:51 arend-lp-dev kernel: [   29.052106]  [<c1082020>] ? pm_trace_dev_match_show+0x20/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [   29.052468]  [<c1273c2b>] kobj_attr_store+0x1b/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [   29.052786]  [<c1177bb6>] sysfs_write_file+0xa6/0x100
Jan 16 16:12:51 arend-lp-dev kernel: [   29.053112]  [<c112047f>] vfs_write+0x8f/0x160
Jan 16 16:12:51 arend-lp-dev kernel: [   29.053407]  [<c1177b10>] ? sysfs_poll+0x80/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.053710]  [<c112075d>] sys_write+0x3d/0x70
Jan 16 16:12:51 arend-lp-dev kernel: [   29.054002]  [<c14b99df>] sysenter_do_call+0x12/0x28
Jan 16 16:12:51 arend-lp-dev kernel: [   29.054320] ---[ end trace 2172e4a3414a456b ]---
Jan 16 16:12:51 arend-lp-dev kernel: [   29.157826] CPU 2 is now offline
Jan 16 16:12:51 arend-lp-dev kernel: [   29.158290] ------------[ cut here ]------------
Jan 16 16:12:51 arend-lp-dev kernel: [   29.158598] WARNING: at drivers/base/core.c:194 device_release+0x76/0x80()
Jan 16 16:12:51 arend-lp-dev kernel: [   29.159015] Hardware name: Latitude E6410
Jan 16 16:12:51 arend-lp-dev kernel: [   29.159286] Device 'machinecheck2' does not have a release() function, it is broken and must be fixed.
Jan 16 16:12:51 arend-lp-dev kernel: [   29.159836] Modules linked in: binfmt_misc snd_hda_codec_hdmi snd_hda_codec_idt nouveau snd_hda_intel snd_hda_codec ttm snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd drm_kms_helper psmouse serio_raw dell_laptop drm intel_agp intel_gtt dcdbas mxm_wmi dell_wmi video sparse_keymap soundcore snd_page_alloc intel_ips agpgart firewire_ohci firewire_core crc_itu_t ahci libahci sdhci_pci sdhci mmc_core e1000e
Jan 16 16:12:51 arend-lp-dev kernel: [   29.164520] Pid: 1272, comm: pm-suspend Tainted: G        W    3.2.0-08699-ga93ce74 #1
Jan 16 16:12:51 arend-lp-dev kernel: [   29.165000] Call Trace:
Jan 16 16:12:51 arend-lp-dev kernel: [   29.165198]  [<c10305e2>] warn_slowpath_common+0x72/0xa0
Jan 16 16:12:51 arend-lp-dev kernel: [   29.165536]  [<c131dfa6>] ? device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.165860]  [<c131dfa6>] ? device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.166182]  [<c10306b3>] warn_slowpath_fmt+0x33/0x40
Jan 16 16:12:51 arend-lp-dev kernel: [   29.166507]  [<c131dfa6>] device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.166822]  [<c1273e2a>] kobject_release+0x3a/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.167139]  [<c1273d17>] kobject_put+0x27/0x60
Jan 16 16:12:51 arend-lp-dev kernel: [   29.167440]  [<c1273de2>] ? kobject_del+0x22/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [   29.167749]  [<c131e975>] ? device_del+0x125/0x150
Jan 16 16:12:51 arend-lp-dev kernel: [   29.168064]  [<c131ddf4>] put_device+0x14/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [   29.168360]  [<c131e9b7>] device_unregister+0x17/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [   29.168687]  [<c14a5256>] mce_cpu_callback+0xc3/0x155
Jan 16 16:12:51 arend-lp-dev kernel: [   29.169015]  [<c14b64a5>] notifier_call_chain+0x45/0x60
Jan 16 16:12:51 arend-lp-dev kernel: [   29.169351]  [<c1053e1e>] __raw_notifier_call_chain+0x1e/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [   29.169712]  [<c1031fa4>] __cpu_notify+0x24/0x40
Jan 16 16:12:51 arend-lp-dev kernel: [   29.170017]  [<c10320cc>] cpu_notify_nofail+0x1c/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [   29.170344]  [<c149929d>] _cpu_down+0xdd/0x250
Jan 16 16:12:51 arend-lp-dev kernel: [   29.170639]  [<c10321b4>] disable_nonboot_cpus+0x74/0x110
Jan 16 16:12:51 arend-lp-dev kernel: [   29.170984]  [<c1083183>] suspend_devices_and_enter+0x173/0x2e0
Jan 16 16:12:51 arend-lp-dev kernel: [   29.171353]  [<c108342c>] enter_state+0x13c/0x160
Jan 16 16:12:51 arend-lp-dev kernel: [   29.171661]  [<c10820aa>] state_store+0x8a/0x110
Jan 16 16:12:51 arend-lp-dev kernel: [   29.171965]  [<c1082020>] ? pm_trace_dev_match_show+0x20/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [   29.172326]  [<c1273c2b>] kobj_attr_store+0x1b/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [   29.172646]  [<c1177bb6>] sysfs_write_file+0xa6/0x100
Jan 16 16:12:51 arend-lp-dev kernel: [   29.172974]  [<c112047f>] vfs_write+0x8f/0x160
Jan 16 16:12:51 arend-lp-dev kernel: [   29.173268]  [<c1177b10>] ? sysfs_poll+0x80/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.173571]  [<c112075d>] sys_write+0x3d/0x70
Jan 16 16:12:51 arend-lp-dev kernel: [   29.173864]  [<c14b99df>] sysenter_do_call+0x12/0x28
Jan 16 16:12:51 arend-lp-dev kernel: [   29.174183] ---[ end trace 2172e4a3414a456c ]---
Jan 16 16:12:51 arend-lp-dev kernel: [   29.277612] CPU 3 is now offline
Jan 16 16:12:51 arend-lp-dev kernel: [   29.278082] ------------[ cut here ]------------
Jan 16 16:12:51 arend-lp-dev kernel: [   29.278392] WARNING: at drivers/base/core.c:194 device_release+0x76/0x80()
Jan 16 16:12:51 arend-lp-dev kernel: [   29.278810] Hardware name: Latitude E6410
Jan 16 16:12:51 arend-lp-dev kernel: [   29.279082] Device 'machinecheck3' does not have a release() function, it is broken and must be fixed.
Jan 16 16:12:51 arend-lp-dev kernel: [   29.279631] Modules linked in: binfmt_misc snd_hda_codec_hdmi snd_hda_codec_idt nouveau snd_hda_intel snd_hda_codec ttm snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd drm_kms_helper psmouse serio_raw dell_laptop drm intel_agp intel_gtt dcdbas mxm_wmi dell_wmi video sparse_keymap soundcore snd_page_alloc intel_ips agpgart firewire_ohci firewire_core crc_itu_t ahci libahci sdhci_pci sdhci mmc_core e1000e
Jan 16 16:12:51 arend-lp-dev kernel: [   29.284313] Pid: 1272, comm: pm-suspend Tainted: G        W    3.2.0-08699-ga93ce74 #1
Jan 16 16:12:51 arend-lp-dev kernel: [   29.284791] Call Trace:
Jan 16 16:12:51 arend-lp-dev kernel: [   29.284989]  [<c10305e2>] warn_slowpath_common+0x72/0xa0
Jan 16 16:12:51 arend-lp-dev kernel: [   29.285327]  [<c131dfa6>] ? device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.285649]  [<c131dfa6>] ? device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.285969]  [<c10306b3>] warn_slowpath_fmt+0x33/0x40
Jan 16 16:12:51 arend-lp-dev kernel: [   29.286294]  [<c131dfa6>] device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.286608]  [<c1273e2a>] kobject_release+0x3a/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.286923]  [<c1273d17>] kobject_put+0x27/0x60
Jan 16 16:12:51 arend-lp-dev kernel: [   29.287222]  [<c1273de2>] ? kobject_del+0x22/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [   29.287529]  [<c131e975>] ? device_del+0x125/0x150
Jan 16 16:12:51 arend-lp-dev kernel: [   29.287843]  [<c131ddf4>] put_device+0x14/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [   29.288139]  [<c131e9b7>] device_unregister+0x17/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [   29.288466]  [<c14a5256>] mce_cpu_callback+0xc3/0x155
Jan 16 16:12:51 arend-lp-dev kernel: [   29.288793]  [<c14b64a5>] notifier_call_chain+0x45/0x60
Jan 16 16:12:51 arend-lp-dev kernel: [   29.289130]  [<c1053e1e>] __raw_notifier_call_chain+0x1e/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [   29.289492]  [<c1031fa4>] __cpu_notify+0x24/0x40
Jan 16 16:12:51 arend-lp-dev kernel: [   29.289797]  [<c10320cc>] cpu_notify_nofail+0x1c/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [   29.290123]  [<c149929d>] _cpu_down+0xdd/0x250
Jan 16 16:12:51 arend-lp-dev kernel: [   29.290418]  [<c10321b4>] disable_nonboot_cpus+0x74/0x110
Jan 16 16:12:51 arend-lp-dev kernel: [   29.290763]  [<c1083183>] suspend_devices_and_enter+0x173/0x2e0
Jan 16 16:12:51 arend-lp-dev kernel: [   29.291133]  [<c108342c>] enter_state+0x13c/0x160
Jan 16 16:12:51 arend-lp-dev kernel: [   29.291440]  [<c10820aa>] state_store+0x8a/0x110
Jan 16 16:12:51 arend-lp-dev kernel: [   29.291744]  [<c1082020>] ? pm_trace_dev_match_show+0x20/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [   29.292106]  [<c1273c2b>] kobj_attr_store+0x1b/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [   29.292425]  [<c1177bb6>] sysfs_write_file+0xa6/0x100
Jan 16 16:12:51 arend-lp-dev kernel: [   29.292753]  [<c112047f>] vfs_write+0x8f/0x160
Jan 16 16:12:51 arend-lp-dev kernel: [   29.293048]  [<c1177b10>] ? sysfs_poll+0x80/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [   29.293353]  [<c112075d>] sys_write+0x3d/0x70
Jan 16 16:12:51 arend-lp-dev kernel: [   29.293647]  [<c14b99df>] sysenter_do_call+0x12/0x28
Jan 16 16:12:51 arend-lp-dev kernel: [   29.293969] ---[ end trace 2172e4a3414a456d ]---
Jan 16 16:12:51 arend-lp-dev kernel: [   29.294358] Extended CMOS year: 2000
Jan 16 16:12:51 arend-lp-dev kernel: [   29.294850] ACPI: Low-level resume complete
Jan 16 16:12:51 arend-lp-dev kernel: [   29.303805] PM: Restoring platform NVS memory
Jan 16 16:12:51 arend-lp-dev kernel: [   29.313487] CPU0: Thermal monitoring handled by SMI
Jan 16 16:12:51 arend-lp-dev kernel: [   29.323835] Extended CMOS year: 2000
Jan 16 16:12:51 arend-lp-dev kernel: [   29.331436] Enabling non-boot CPUs ...
Jan 16 16:12:51 arend-lp-dev kernel: [   29.339449] Booting Node 0 Processor 1 APIC 0x4
Jan 16 16:12:51 arend-lp-dev kernel: [   29.349018] smpboot cpu 1: start_ip = 96000
Jan 16 16:12:51 arend-lp-dev kernel: [   29.368076] Initializing CPU#1
Jan 16 16:12:51 arend-lp-dev kernel: [   29.374474] CPU1: Thermal monitoring handled by SMI
Jan 16 16:12:51 arend-lp-dev kernel: [   29.384668] Calibrating delay loop (skipped) already calibrated this CPU
Jan 16 16:12:51 arend-lp-dev kernel: [   29.418661] CPU1 is up
Jan 16 16:12:51 arend-lp-dev kernel: [   29.424231] Booting Node 0 Processor 2 APIC 0x1
Jan 16 16:12:51 arend-lp-dev kernel: [   29.433796] smpboot cpu 2: start_ip = 96000
Jan 16 16:12:51 arend-lp-dev kernel: [   29.452775] Initializing CPU#2
Jan 16 16:12:51 arend-lp-dev kernel: [   29.459175] CPU2: Thermal monitoring handled by SMI
Jan 16 16:12:51 arend-lp-dev kernel: [   29.469367] Calibrating delay loop (skipped) already calibrated this CPU
Jan 16 16:12:51 arend-lp-dev kernel: [   29.503620] CPU2 is up
Jan 16 16:12:51 arend-lp-dev kernel: [   29.509235] Booting Node 0 Processor 3 APIC 0x5
Jan 16 16:12:51 arend-lp-dev kernel: [   29.518804] smpboot cpu 3: start_ip = 96000
Jan 16 16:12:51 arend-lp-dev kernel: [   29.537782] Initializing CPU#3
Jan 16 16:12:51 arend-lp-dev kernel: [   29.544180] CPU3: Thermal monitoring handled by SMI
Jan 16 16:12:51 arend-lp-dev kernel: [   29.554374] Calibrating delay loop (skipped) already calibrated this CPU
Jan 16 16:12:51 arend-lp-dev kernel: [   29.588799] CPU3 is up
Jan 16 16:12:51 arend-lp-dev kernel: [   29.596812] ACPI: Waking up from system sleep state S3
Jan 16 16:12:51 arend-lp-dev kernel: [   29.674203] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [   29.688278] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [   29.702906] PM: early resume of devices complete after 28.947 msecs
Jan 16 16:12:51 arend-lp-dev kernel: [   29.716520] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Jan 16 16:12:51 arend-lp-dev kernel: [   29.716533] pci 0000:00:1e.0: setting latency timer to 64
Jan 16 16:12:51 arend-lp-dev kernel: [   29.740208] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Jan 16 16:12:51 arend-lp-dev kernel: [   29.740236] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [   29.740269] ahci 0000:00:1f.2: setting latency timer to 64
Jan 16 16:12:51 arend-lp-dev kernel: [   29.740372] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
Jan 16 16:12:51 arend-lp-dev kernel: [   29.740599] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
Jan 16 16:12:51 arend-lp-dev kernel: [   29.769722] firewire_ohci 0000:04:00.4: irq 44 for MSI/MSI-X
Jan 16 16:12:51 arend-lp-dev kernel: [   29.769958] firewire_core: skipped bus generations, destroying all nodes
Jan 16 16:12:51 arend-lp-dev kernel: [   29.863455] serial 00:08: activated
Jan 16 16:12:51 arend-lp-dev kernel: [   29.871831] Extended CMOS year: 2000
Jan 16 16:12:51 arend-lp-dev kernel: [   30.021390] usb 1-1.4: reset high-speed USB device number 5 using ehci_hcd
Jan 16 16:12:51 arend-lp-dev kernel: [   30.245011] usb 1-1.2: reset high-speed USB device number 4 using ehci_hcd
Jan 16 16:12:51 arend-lp-dev kernel: [   30.268745] firewire_core: rediscovered device fw0
Jan 16 16:12:51 arend-lp-dev kernel: [   30.383564] dell_wmi: Received unknown WMI event (0x11)
Jan 16 16:12:51 arend-lp-dev kernel: [   30.516494] usb 1-1.1: reset high-speed USB device number 3 using ehci_hcd
Jan 16 16:12:51 arend-lp-dev kernel: [   30.574062] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 16 16:12:51 arend-lp-dev kernel: [   30.627212] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
Jan 16 16:12:51 arend-lp-dev kernel: [   30.728834] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Jan 16 16:12:51 arend-lp-dev kernel: [   30.803763] ata1.00: configured for UDMA/133
Jan 16 16:12:51 arend-lp-dev kernel: [   30.855809] sd 0:0:0:0: [sda] Starting disk
Jan 16 16:12:51 arend-lp-dev kernel: [   30.923815] usb 2-1.7: reset full-speed USB device number 3 using ehci_hcd
Jan 16 16:12:51 arend-lp-dev kernel: [   31.175196] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 16 16:12:51 arend-lp-dev kernel: [   31.232457] ata2.00: configured for UDMA/133
Jan 16 16:12:51 arend-lp-dev kernel: [   31.602454] ata5: SATA link down (SStatus 0 SControl 300)
Jan 16 16:12:51 arend-lp-dev kernel: [   31.981797] ata6: SATA link down (SStatus 0 SControl 300)
Jan 16 16:12:51 arend-lp-dev kernel: [   32.043966] PM: resume of devices complete after 2331.835 msecs
Jan 16 16:12:51 arend-lp-dev kernel: [   32.093540] PM: resume devices took 2.384 seconds
Jan 16 16:12:51 arend-lp-dev kernel: [   32.132899] PM: Finishing wakeup.
Jan 16 16:12:51 arend-lp-dev kernel: [   32.161537] Restarting tasks ... done.
Jan 16 16:12:51 arend-lp-dev kernel: [   32.194440] video LNXVIDEO:00: Restoring backlight state
Jan 16 16:12:52 arend-lp-dev kernel: [   32.478127] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
Jan 16 16:12:52 arend-lp-dev kernel: [   32.572872] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
Jan 16 16:12:52 arend-lp-dev kernel: [   32.615312] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 16 16:12:52 arend-lp-dev kernel: [   33.072987] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Jan 16 16:12:52 arend-lp-dev kernel: [   33.130491] EXT4-fs (sda7): re-mounted. Opts: commit=0
Jan 16 16:12:57 arend-lp-dev kernel: [   37.306898] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
Jan 16 16:12:57 arend-lp-dev kernel: [   37.428430] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready



[-- Attachment #3: str-devices-3.2.0-08699-ga93ce74.log --]
[-- Type: text/plain, Size: 4259 bytes --]

Jan 16 16:31:05 arend-lp-dev kernel: [   31.970129] eth0: no IPv6 routers present
Jan 16 16:32:35 arend-lp-dev kernel: [  121.206168] PM: Syncing filesystems ... done.
Jan 16 16:32:35 arend-lp-dev kernel: [  121.212149] PM: Preparing system for mem sleep
Jan 16 16:32:45 arend-lp-dev kernel: [  121.218917] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jan 16 16:32:45 arend-lp-dev kernel: [  121.241792] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jan 16 16:32:45 arend-lp-dev kernel: [  121.261752] PM: Entering mem sleep
Jan 16 16:32:45 arend-lp-dev kernel: [  121.265688] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jan 16 16:32:45 arend-lp-dev kernel: [  121.271175] sd 0:0:0:0: [sda] Stopping disk
Jan 16 16:32:45 arend-lp-dev kernel: [  122.288913] serial 00:08: disabled
Jan 16 16:32:45 arend-lp-dev kernel: [  122.289156] serial 00:08: wake-up capability disabled by ACPI
Jan 16 16:32:45 arend-lp-dev kernel: [  122.296717] ACPI handle has no context!
Jan 16 16:32:45 arend-lp-dev kernel: [  122.462403] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
Jan 16 16:32:45 arend-lp-dev kernel: [  122.735645] ACPI handle has no context!
Jan 16 16:32:45 arend-lp-dev kernel: [  122.751704] PM: suspend of devices complete after 1489.550 msecs
Jan 16 16:32:45 arend-lp-dev kernel: [  122.752076] PM: suspend devices took 1.492 seconds
Jan 16 16:32:45 arend-lp-dev kernel: [  122.752383] suspend debug: Waiting for 5 seconds.
Jan 16 16:32:45 arend-lp-dev kernel: [  127.704535] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Jan 16 16:32:45 arend-lp-dev kernel: [  127.705016] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Jan 16 16:32:45 arend-lp-dev kernel: [  127.705079] pci 0000:00:1e.0: setting latency timer to 64
Jan 16 16:32:45 arend-lp-dev kernel: [  127.720139] serial 00:08: activated
Jan 16 16:32:45 arend-lp-dev kernel: [  127.720612] ahci 0000:00:1f.2: setting latency timer to 64
Jan 16 16:32:45 arend-lp-dev kernel: [  127.724613] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
Jan 16 16:32:45 arend-lp-dev kernel: [  127.724702] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
Jan 16 16:32:45 arend-lp-dev kernel: [  127.724859] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
Jan 16 16:32:45 arend-lp-dev kernel: [  127.746911] Extended CMOS year: 2000
Jan 16 16:32:45 arend-lp-dev kernel: [  127.776912] firewire_ohci 0000:04:00.4: irq 44 for MSI/MSI-X
Jan 16 16:32:45 arend-lp-dev kernel: [  127.824410] firewire_core: skipped bus generations, destroying all nodes
Jan 16 16:32:45 arend-lp-dev kernel: [  127.948095] usb 2-1.8: reset full-speed USB device number 4 using ehci_hcd
Jan 16 16:32:45 arend-lp-dev kernel: [  128.379055] firewire_core: rediscovered device fw0
Jan 16 16:32:45 arend-lp-dev kernel: [  128.546605] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 16 16:32:45 arend-lp-dev kernel: [  128.601041] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Jan 16 16:32:45 arend-lp-dev kernel: [  130.368669] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Jan 16 16:32:45 arend-lp-dev kernel: [  130.442643] ata1.00: configured for UDMA/133
Jan 16 16:32:45 arend-lp-dev kernel: [  130.481050] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
Jan 16 16:32:45 arend-lp-dev kernel: [  130.558218] sd 0:0:0:0: [sda] Starting disk
Jan 16 16:32:45 arend-lp-dev kernel: [  130.877461] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 16 16:32:45 arend-lp-dev kernel: [  130.936864] ata2.00: configured for UDMA/133
Jan 16 16:32:45 arend-lp-dev kernel: [  131.308497] ata5: SATA link down (SStatus 0 SControl 300)
Jan 16 16:32:45 arend-lp-dev kernel: [  131.687650] ata6: SATA link down (SStatus 0 SControl 300)
Jan 16 16:32:45 arend-lp-dev kernel: [  131.749779] PM: resume of devices complete after 4054.352 msecs
Jan 16 16:32:45 arend-lp-dev kernel: [  131.799418] PM: resume devices took 4.104 seconds
Jan 16 16:32:45 arend-lp-dev kernel: [  131.838746] PM: Finishing wakeup.
Jan 16 16:32:45 arend-lp-dev kernel: [  131.866444] Restarting tasks ... done.
Jan 16 16:32:45 arend-lp-dev kernel: [  131.903604] video LNXVIDEO:00: Restoring backlight state

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Linus Torvalds]

2012/1/16 Arend van Spriel <arend@broadcom.com>:
>
> I build a new kernel with MCE enabled. Same issue. I did not load bcma
> or brcmsmac yet. Attached is trace I could pull from the kernel log
> (str-test-*).

Oh well. Everything looks fine in the test traces - the warnings are
annoying and nasty, but a known issue and not dangerous (and I have a
patch in my tree to fix them now).

So if the real suspend fails, it's some other subsystem that has
gotten broken. I don't think I have any other reports like that yet,
and there is not a lot to go on. If you could try to bisect it (I
assume plain Linux-3.2 works fine?) that woudl be wonderful, otherwise
I think we're stuck waiting for somebody else to hit it and figure it
out.

                 Linus

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Arend van Spriel]

On 01/17/2012 02:12 AM, Linus Torvalds wrote:
> 2012/1/16 Arend van Spriel <arend@broadcom.com>:
>>
>> I build a new kernel with MCE enabled. Same issue. I did not load bcma
>> or brcmsmac yet. Attached is trace I could pull from the kernel log
>> (str-test-*).
> 
> Oh well. Everything looks fine in the test traces - the warnings are
> annoying and nasty, but a known issue and not dangerous (and I have a
> patch in my tree to fix them now).
> 
> So if the real suspend fails, it's some other subsystem that has
> gotten broken. I don't think I have any other reports like that yet,
> and there is not a lot to go on. If you could try to bisect it (I
> assume plain Linux-3.2 works fine?) that woudl be wonderful, otherwise
> I think we're stuck waiting for somebody else to hit it and figure it
> out.
> 
>                  Linus
> 

I am going to give the bisect a try. Hopefully (not likely) it will take
not too many steps.

Gr. AvS

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Arend van Spriel]

[-- Attachment #1: Type: text/plain, Size: 3506 bytes --]

On 01/17/2012 02:12 AM, Linus Torvalds wrote:
> 2012/1/16 Arend van Spriel <arend@broadcom.com>:
>>
>> I build a new kernel with MCE enabled. Same issue. I did not load bcma
>> or brcmsmac yet. Attached is trace I could pull from the kernel log
>> (str-test-*).
> 
> Oh well. Everything looks fine in the test traces - the warnings are
> annoying and nasty, but a known issue and not dangerous (and I have a
> patch in my tree to fix them now).
> 
> So if the real suspend fails, it's some other subsystem that has
> gotten broken. I don't think I have any other reports like that yet,
> and there is not a lot to go on. If you could try to bisect it (I
> assume plain Linux-3.2 works fine?) that woudl be wonderful, otherwise
> I think we're stuck waiting for somebody else to hit it and figure it
> out.
> 
>                  Linus
> 

Hi Linus,

No trivial bisect. I wish I had a faster build machine, but alas. I
suspected some issue in DRM and the bisect took me into drm-core-next
branch. I ended up at the following commit:

dc97b3409a790d2a21aac6e5cdb99558b5944119 is the first bad commit
commit dc97b3409a790d2a21aac6e5cdb99558b5944119
Author: Jerome Glisse <jglisse@redhat.com>
Date:   Fri Nov 18 11:47:03 2011 -0500

    drm/ttm: callback move_notify any time bo placement change v4

    Previously we were calling back move_notify in error path when the
    bo is returned to it's original position or when destroy the bo.
    When destroying the bo set the new mem placement as NULL when calling
    back in the driver.

    Updating nouveau to deal with NULL placement properly.

    v2: reserve the object before calling move_notify in bo destroy path
        at that point ttm should be the only piece of code interacting
        with the object so atomic_set is safe here.
    v3: callback move notify only once the bo is in its new position
        call move notify want swaping out the buffer
    v4:- don't call move_notify when swapin out bo, assume driver should
         do what is appropriate in swap notify
       - move move_notify call back to ttm_bo_cleanup_memtype_use for
         destroy path

    Reviewed-by: Jerome Glisse <jglisse@redhat.com>
    Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

Actually, this commit was already bothering my bisect as it gave me a
NULL pointer deref on system startup. I patched it to proceed the bisect
(see attached diff). The NULL deref was fixed in the drm-nouveau-next
branch (f7b24c4 drm/nouveau/ttm: fix crash as a result of a recent ttm
change). However, the suspend/resume issue was not resolved.

Gr. AvS
---------------------
01:00.0 VGA compatible controller: nVidia Corporation GT218 [NVS 3100M]
(rev a2) (prog-if 00 [VGA controller])
        Subsystem: Dell Device 040a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at e0000000 (64-bit, prefetchable) [size=32M]
        Region 5: I/O ports at 7000 [size=128]
        Expansion ROM at e3000000 [disabled] [size=512K]
        Capabilities: <access denied>
        Kernel driver in use: nouveau
        Kernel modules: nouveau, nvidiafb

[-- Attachment #2: nouveau_bo.diff --]
[-- Type: text/plain, Size: 816 bytes --]

diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index b1b33a1..680b2f7 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -810,7 +810,7 @@ out:
 static void
 nouveau_bo_move_ntfy(struct ttm_buffer_object *bo, struct ttm_mem_reg *new_mem)
 {
-	struct nouveau_mem *node = new_mem->mm_node;
+	struct nouveau_mem *node;
 	struct nouveau_bo *nvbo = nouveau_bo(bo);
 	struct nouveau_vma *vma;
 
@@ -820,6 +820,7 @@ nouveau_bo_move_ntfy(struct ttm_buffer_object *bo, struct ttm_mem_reg *new_mem)
 		} else
 		if (new_mem && new_mem->mem_type == TTM_PL_TT &&
 		    nvbo->page_shift == vma->vm->spg_shift) {
+			node = new_mem->mm_node;
 			nouveau_vm_map_sg(vma, 0, new_mem->
 					  num_pages << PAGE_SHIFT,
 					  node, node->pages);

[-- Attachment #3: dmesg-3.2.0-rc1-00070-gdc97b34-dirty.txt --]
[-- Type: text/plain, Size: 59178 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-rc1-00070-gdc97b34-dirty (root@arend-vb-linux) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #18 SMP Wed Jan 18 19:42:00 CET 2012
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[    0.000000]  BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cf65f000 (usable)
[    0.000000]  BIOS-e820: 00000000cf65f000 - 00000000cf67f000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cf67f000 - 00000000cf76f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf76f000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0xcf65f max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF0000000 write-back
[    0.000000]   3 base 100000000 mask FE0000000 write-back
[    0.000000]   4 base 120000000 mask FF0000000 write-back
[    0.000000]   5 base 12C000000 mask FFC000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] found SMP MP-table at [c00f2200] f2200
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [c0096000] 96000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 37c09000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 37417000 - 377fd64f
[    0.000000] Move RAMDISK from 0000000037c09000 - 0000000037fef64e to 37417000 - 377fd64e
[    0.000000] ACPI: RSDP 000fe300 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT cf67de18 00064 (v01 DELL    E2      06222004 MSFT 00010013)
[    0.000000] ACPI: FACP cf75fc18 000F4 (v04 DELL    E2      06222004 MSFT 00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCF76BF40/0x00000000CF76ED40, using 32 (20110623/tbfadt-489)
[    0.000000] ACPI: DSDT cf73e018 0A24E (v01 DELL    E2      00001001 INTL 20080729)
[    0.000000] ACPI: FACS cf76bf40 00040
[    0.000000] ACPI: APIC cf67cf18 0008C (v02 DELL    E2      06222004 MSFT 00010013)
[    0.000000] ACPI: TCPA cf76dd18 00032 (v02                 00000000      00000000)
[    0.000000] ACPI: MCFG cf76dc98 0003C (v01 A M I  GMCH945. 06222004 MSFT 00000097)
[    0.000000] ACPI: HPET cf76dc18 00038 (v01 DELL    E2      00000001 ASL  00000061)
[    0.000000] ACPI: BOOT cf76db98 00028 (v01 DELL   E2       06222004 AMI  00010013)
[    0.000000] ACPI: SLIC cf766818 00176 (v03 DELL    E2      06222004 MSFT 00010013)
[    0.000000] ACPI: SSDT cf74d018 009F1 (v01  PmRef    CpuPm 00003000 INTL 20080729)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2430MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000cf65f
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009a
[    0.000000]     0: 0x00000100 -> 0x000cf65f
[    0.000000] On node 0 totalpages: 849385
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3946 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4861 pages used for memmap
[    0.000000]   HighMem zone: 617316 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f5400000 s30592 r0 d22656 u524288
[    0.000000] pcpu-alloc: s30592 r0 d22656 u524288 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 842748
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-rc1-00070-gdc97b34-dirty root=UUID=7051116f-03ec-4df3-a8ff-813fb03aec9f ro ignore_loglevel console=tty0 console=ttyS0,115200
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:000cf65f)
[    0.000000] Memory: 3357100k/3398012k available (4807k kernel code, 40440k reserved, 2264k data, 556k init, 2488708k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc16e8000 - 0xc1773000   ( 556 kB)
[    0.000000]       .data : 0xc14b1f2a - 0xc16e7f80   (2264 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14b1f2a   (4807 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f500a000 soft=f500c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 13631488 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2792.471 MHz processor.
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5584.94 BogoMIPS (lpj=11169884)
[    0.010816] pid_max: default: 32768 minimum: 301
[    0.015507] Security Framework initialized
[    0.019667] AppArmor: AppArmor initialized
[    0.023850] Mount-cache hash table entries: 512
[    0.028538] Initializing cgroup subsys cpuacct
[    0.033041] Initializing cgroup subsys memory
[    0.037456] Initializing cgroup subsys devices
[    0.041952] Initializing cgroup subsys freezer
[    0.046448] Initializing cgroup subsys net_cls
[    0.050962] CPU: Physical Processor ID: 0
[    0.055208] CPU: Processor Core ID: 0
[    0.058926] mce: CPU supports 9 MCE banks
[    0.062996] CPU0: Thermal monitoring handled by SMI
[    0.067929] using mwait in idle threads.
[    0.073143] ACPI: Core revision 20110623
[    0.081604] ftrace: allocating 20148 entries in 40 pages
[    0.091886] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.097734] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.143221] CPU0: Intel(R) Core(TM) i7 CPU       M 640  @ 2.80GHz stepping 05
[    0.256222] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.263689] ... version:                3
[    0.267747] ... bit width:              48
[    0.271895] ... generic registers:      4
[    0.277626] ... value mask:             0000ffffffffffff
[    0.282987] ... max period:             000000007fffffff
[    0.288345] ... fixed-purpose events:   3
[    0.292406] ... event mask:             000000070000000f
[    0.297891] CPU 1 irqstacks, hard=f41ce000 soft=f41d8000
[    0.303251] Booting Node   0, Processors  #1
[    0.307452] smpboot cpu 1: start_ip = 96000
[    0.322208] Initializing CPU#1
[    0.403979] CPU1: Thermal monitoring handled by SMI
[    0.428964] CPU 2 irqstacks, hard=f41e2000 soft=f41e4000
[    0.434327]  #2
[    0.435952] smpboot cpu 2: start_ip = 96000
[    0.450570] Initializing CPU#2
[    0.531756] CPU2: Thermal monitoring handled by SMI
[    0.556762] CPU 3 irqstacks, hard=f41ee000 soft=f41f0000
[    0.562124]  #3
[    0.563749] smpboot cpu 3: start_ip = 96000
[    0.578366] Initializing CPU#3
[    0.659530] CPU3: Thermal monitoring handled by SMI
[    0.684405] Brought up 4 CPUs
[    0.687427] Total of 4 processors activated (22342.55 BogoMIPS).
[    0.695545] devtmpfs: initialized
[    0.699018] PM: Registering ACPI NVS region at cf67f000 (983040 bytes)
[    0.706277] print_constraints: dummy:
[    0.710243] RTC time:  9:35:48, date: 01/19/12
[    0.714762] NET: Registered protocol family 16
[    0.719309] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.726931] ACPI: bus type pci registered
[    0.731041] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.740397] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.747228] PCI: Using MMCONFIG for extended config space
[    0.752677] PCI: Using configuration type 1 for base access
[    0.758302] dmi type 0xB1 record - unknown flag
[    0.763433] bio: create slab <bio-0> at 0
[    0.767544] ACPI: Added _OSI(Module Device)
[    0.771778] ACPI: Added _OSI(Processor Device)
[    0.776273] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.781025] ACPI: Added _OSI(Processor Aggregator Device)
[    0.787589] ACPI: EC: Look up EC in DSDT
[    0.819265] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.887417] ACPI: SSDT cf7eaa18 004B6 (v01  PmRef  Cpu0Ist 00003000 INTL 20080729)
[    0.895428] ACPI: Dynamic OEM Table Load:
[    0.899615] ACPI: SSDT   (null) 004B6 (v01  PmRef  Cpu0Ist 00003000 INTL 20080729)
[    0.907469] ACPI: SSDT cf7e8018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20080729)
[    0.915461] ACPI: Dynamic OEM Table Load:
[    0.919644] ACPI: SSDT   (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20080729)
[    0.951246] ACPI: SSDT cf7e9a98 00303 (v01  PmRef    ApIst 00003000 INTL 20080729)
[    0.959296] ACPI: Dynamic OEM Table Load:
[    0.963484] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20080729)
[    0.983086] ACPI: SSDT cf7e7d98 00119 (v01  PmRef    ApCst 00003000 INTL 20080729)
[    0.991100] ACPI: Dynamic OEM Table Load:
[    0.995286] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20080729)
[    1.086872] ACPI: Interpreter enabled
[    1.090595] ACPI: (supports S0 S3 S4 S5)
[    1.094843] ACPI: Using IOAPIC for interrupt routing
[    1.767048] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
[    1.794594] ACPI: No dock devices found.
[    1.798568] HEST: Table not found.
[    1.802023] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.811478] \_SB_.PCI0:_OSC invalid UUID
[    1.815453] _OSC request data:1 8 1f
[    1.819420] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.826094] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.832755] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.839415] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.846779] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfeafffff]
[    1.854151] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    1.860145] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[    1.866132] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.872272] pci 0000:00:01.0: PME# disabled
[    1.876555] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
[    1.882543] pci 0000:00:19.0: reg 10: [mem 0xe9600000-0xe961ffff]
[    1.888693] pci 0000:00:19.0: reg 14: [mem 0xe9680000-0xe9680fff]
[    1.894842] pci 0000:00:19.0: reg 18: [io  0x8040-0x805f]
[    1.900353] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    1.906497] pci 0000:00:19.0: PME# disabled
[    1.910755] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    1.916743] pci 0000:00:1a.0: reg 10: [mem 0xe9670000-0xe96703ff]
[    1.922968] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.929109] pci 0000:00:1a.0: PME# disabled
[    1.933371] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    1.939355] pci 0000:00:1b.0: reg 10: [mem 0xe9660000-0xe9663fff 64bit]
[    1.946085] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.952225] pci 0000:00:1b.0: PME# disabled
[    1.956484] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    1.962526] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.968669] pci 0000:00:1c.0: PME# disabled
[    1.972929] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    1.978969] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.985112] pci 0000:00:1c.1: PME# disabled
[    1.989370] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[    1.995409] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    2.001554] pci 0000:00:1c.2: PME# disabled
[    2.005813] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[    2.011852] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    2.017992] pci 0000:00:1c.3: PME# disabled
[    2.022260] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    2.028249] pci 0000:00:1d.0: reg 10: [mem 0xe9650000-0xe96503ff]
[    2.034471] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    2.040611] pci 0000:00:1d.0: PME# disabled
[    2.044867] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    2.050903] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
[    2.056982] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[    2.062971] pci 0000:00:1f.2: reg 10: [io  0x8090-0x8097]
[    2.068427] pci 0000:00:1f.2: reg 14: [io  0x8080-0x8083]
[    2.073883] pci 0000:00:1f.2: reg 18: [io  0x8070-0x8077]
[    2.079337] pci 0000:00:1f.2: reg 1c: [io  0x8060-0x8063]
[    2.084791] pci 0000:00:1f.2: reg 20: [io  0x8020-0x803f]
[    2.090247] pci 0000:00:1f.2: reg 24: [mem 0xe9640000-0xe96407ff]
[    2.096429] pci 0000:00:1f.2: PME# supported from D3hot
[    2.101706] pci 0000:00:1f.2: PME# disabled
[    2.105957] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    2.111941] pci 0000:00:1f.3: reg 10: [mem 0xe9630000-0xe96300ff 64bit]
[    2.118630] pci 0000:00:1f.3: reg 20: [io  0x8000-0x801f]
[    2.124120] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    2.130112] pci 0000:00:1f.6: reg 10: [mem 0xe9620000-0xe9620fff 64bit]
[    2.136878] pci 0000:01:00.0: [10de:0a6c] type 0 class 0x000300
[    2.142850] pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
[    2.148997] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    2.156096] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[    2.163191] pci 0000:01:00.0: reg 24: [io  0x7000-0x707f]
[    2.168643] pci 0000:01:00.0: reg 30: [mem 0xe3000000-0xe307ffff pref]
[    2.175248] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[    2.181222] pci 0000:01:00.1: reg 10: [mem 0xe3080000-0xe3083fff]
[    2.187417] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    2.192689] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    2.198825] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe30fffff]
[    2.205708] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    2.210978] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    2.217117] pci 0000:00:1c.0:   bridge window [mem 0xe8200000-0xe95fffff]
[    2.224073] pci 0000:03:00.0: [14e4:4353] type 0 class 0x000280
[    2.230105] pci 0000:03:00.0: reg 10: [mem 0xe6e00000-0xe6e03fff 64bit]
[    2.236963] pci 0000:03:00.0: supports D1 D2
[    2.241278] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    2.247448] pci 0000:03:00.0: PME# disabled
[    2.251780] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    2.257053] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    2.263192] pci 0000:00:1c.1:   bridge window [mem 0xe6e00000-0xe81fffff]
[    2.270148] pci 0000:04:00.0: [1180:e476] type 2 class 0x000607
[    2.276177] pci 0000:04:00.0: reg 10: [mem 0xe5940000-0xe5940fff]
[    2.282411] pci 0000:04:00.0: supports D1 D2
[    2.286729] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.293434] pci 0000:04:00.0: PME# disabled
[    2.297755] pci 0000:04:00.1: [1180:e822] type 0 class 0x000805
[    2.303783] pci 0000:04:00.1: reg 10: [mem 0xe5930000-0xe59300ff]
[    2.310094] pci 0000:04:00.1: supports D1 D2
[    2.314410] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    2.321115] pci 0000:04:00.1: PME# disabled
[    2.325439] pci 0000:04:00.4: [1180:e832] type 0 class 0x000c00
[    2.331467] pci 0000:04:00.4: reg 10: [mem 0xe5900000-0xe59007ff]
[    2.337780] pci 0000:04:00.4: supports D1 D2
[    2.342096] pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[    2.348802] pci 0000:04:00.4: PME# disabled
[    2.353141] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    2.358413] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
[    2.364553] pci 0000:00:1c.2:   bridge window [mem 0xe3100000-0xe59fffff]
[    2.371475] pci_bus 0000:05: [bus 05-08] partially hidden behind bridge 0000:04 [bus 04-05]
[    2.379927] pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
[    2.385200] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    2.391338] pci 0000:00:1c.3:   bridge window [mem 0xe5a00000-0xe6dfffff]
[    2.398239] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
[    2.405339] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    2.413305] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    2.421270] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    2.429929] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
[    2.438615] pci_bus 0000:00: on NUMA node 0
[    2.442847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    2.448930] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    2.457043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    2.463518] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    2.469951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    2.476384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    2.482818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    2.489302] \_SB_.PCI0:_OSC invalid UUID
[    2.493271] _OSC request data:1 1f 1f
[    2.497309]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    2.503034] \_SB_.PCI0:_OSC invalid UUID
[    2.507003] _OSC request data:1 0 1d
[    2.510950]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    2.519173] ACPI _OSC control for PCIe not granted, disabling ASPM
[    2.528110] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[    2.534113] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
[    2.540089] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
[    2.546067] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
[    2.552041] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
[    2.558014] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
[    2.563989] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
[    2.569969] pci_bus 0000:3f: on NUMA node 0
[    2.574201]  pci0000:3f: Requesting ACPI _OSC control (0x1d)
[    2.579904]  pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    2.588476] ACPI _OSC control for PCIe not granted, disabling ASPM
[    2.594859] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    2.602937] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    2.611015] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    2.618765] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    2.626846] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    2.634599] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    2.643607] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    2.651694] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    2.660718] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    2.668860] vgaarb: loaded
[    2.671617] vgaarb: bridge control possible 0000:01:00.0
[    2.677035] SCSI subsystem initialized
[    2.680861] libata version 3.00 loaded.
[    2.684775] usbcore: registered new interface driver usbfs
[    2.690312] usbcore: registered new interface driver hub
[    2.695683] usbcore: registered new device driver usb
[    2.700874] wmi: Mapper loaded
[    2.704082] PCI: Using ACPI for IRQ routing
[    2.710454] PCI: pci_cache_line_size set to 64 bytes
[    2.715540] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[    2.721752] reserve RAM buffer: 00000000cf65f000 - 00000000cfffffff
[    2.728267] NetLabel: Initializing
[    2.731959] NetLabel:  domain hash size = 128
[    2.736361] NetLabel:  protocols = UNLABELED CIPSOv4
[    2.741377] NetLabel:  unlabeled traffic allowed by default
[    2.747029] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    2.753800] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    2.761689] Switching to clocksource hpet
[    2.770322] AppArmor: AppArmor Filesystem Enabled
[    2.775105] pnp: PnP ACPI init
[    2.778224] ACPI: bus type pnp registered
[    2.782537] pnp 00:00: [bus 00-3e]
[    2.785997] pnp 00:00: [io  0x0000-0x0cf7 window]
[    2.790750] pnp 00:00: [io  0x0cf8-0x0cff]
[    2.794898] pnp 00:00: [io  0x0d00-0xffff window]
[    2.799652] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    2.805100] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    2.810549] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    2.815998] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    2.821444] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    2.826892] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    2.832341] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    2.837789] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    2.843237] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    2.848685] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    2.854134] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    2.859582] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    2.865030] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    2.870476] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    2.875922] pnp 00:00: [mem 0xd0000000-0xfeafffff window]
[    2.881370] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    2.886856] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    2.894153] pnp 00:01: [io  0x0000-0x001f]
[    2.898303] pnp 00:01: [io  0x0081-0x0091]
[    2.902450] pnp 00:01: [io  0x0093-0x009f]
[    2.906599] pnp 00:01: [io  0x00c0-0x00df]
[    2.910747] pnp 00:01: [dma 4]
[    2.913870] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    2.920449] pnp 00:02: [mem 0xff000000-0xffffffff]
[    2.925304] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    2.931930] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    2.936786] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    2.943369] pnp 00:04: [io  0x00f0]
[    2.946920] pnp 00:04: [irq 13]
[    2.950130] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    2.956712] pnp 00:05: [io  0x002e-0x002f]
[    2.960860] pnp 00:05: [io  0x004e-0x004f]
[    2.965006] pnp 00:05: [io  0x0061]
[    2.968546] pnp 00:05: [io  0x0063]
[    2.972088] pnp 00:05: [io  0x0065]
[    2.975631] pnp 00:05: [io  0x0067]
[    2.979173] pnp 00:05: [io  0x0070]
[    2.982715] pnp 00:05: [io  0x0080]
[    2.986258] pnp 00:05: [io  0x0092]
[    2.989800] pnp 00:05: [io  0x00b2-0x00b3]
[    2.993948] pnp 00:05: [io  0x0680-0x069f]
[    2.998095] pnp 00:05: [io  0x1000-0x1003]
[    3.002242] pnp 00:05: [io  0x1004-0x1013]
[    3.006388] pnp 00:05: [io  0xffff]
[    3.009930] pnp 00:05: [io  0x0400-0x047f]
[    3.014077] pnp 00:05: [io  0x0500-0x057f]
[    3.018224] pnp 00:05: [io  0x164e-0x164f]
[    3.022406] system 00:05: [io  0x0680-0x069f] has been reserved
[    3.028376] system 00:05: [io  0x1000-0x1003] has been reserved
[    3.034343] system 00:05: [io  0x1004-0x1013] has been reserved
[    3.040311] system 00:05: [io  0xffff] has been reserved
[    3.045673] system 00:05: [io  0x0400-0x047f] has been reserved
[    3.051640] system 00:05: [io  0x0500-0x057f] has been reserved
[    3.057608] system 00:05: [io  0x164e-0x164f] has been reserved
[    3.063575] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.070416] pnp 00:06: [io  0x0070-0x0077]
[    3.074566] pnp 00:06: [irq 8]
[    3.077690] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    3.084272] pnp 00:07: [io  0x0060]
[    3.087814] pnp 00:07: [io  0x0064]
[    3.091357] pnp 00:07: [irq 1]
[    3.094481] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    3.109478] pnp 00:08: [io  0x03f8-0x03ff]
[    3.113632] pnp 00:08: [irq 4]
[    3.116777] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    3.133155] pnp 00:09: [io  0x0378-0x037b]
[    3.137308] pnp 00:09: [irq 7]
[    3.140448] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[    3.147031] pnp 00:0a: [irq 12]
[    3.150244] pnp 00:0a: Plug and Play ACPI device, IDs DLL040a PNP0f13 (active)
[    3.157683] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[    3.162527] pnp 00:0b: [mem 0xfed10000-0xfed13fff]
[    3.167369] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[    3.172212] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[    3.177054] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[    3.181894] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[    3.186734] pnp 00:0b: [mem 0xfed90000-0xfed8ffff disabled]
[    3.192353] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[    3.197197] pnp 00:0b: [mem 0xff000000-0xffffffff]
[    3.202037] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[    3.206878] pnp 00:0b: [mem 0xe96c0000-0xe96c0fff]
[    3.211758] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    3.218420] system 00:0b: [mem 0xfed10000-0xfed13fff] has been reserved
[    3.225080] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    3.231740] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    3.238400] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    3.245061] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    3.251722] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    3.258382] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
[    3.265390] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    3.272396] system 00:0b: [mem 0xe96c0000-0xe96c0fff] has been reserved
[    3.279055] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.285940] pnp 00:0c: [irq 23]
[    3.289159] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
[    3.300811] pnp 00:0d: [bus 3f]
[    3.304034] pnp 00:0d: Plug and Play ACPI device, IDs PNP0a03 (active)
[    3.321249] pnp: PnP ACPI: found 14 devices
[    3.325485] ACPI: ACPI bus type pnp unregistered
[    3.366216] PCI: max bus depth: 2 pci_try_num: 3
[    3.370941] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe9700000-0xe98fffff 64bit pref]
[    3.378826] pci 0000:00:1c.2: BAR 15: assigned [mem 0xec000000-0xefffffff pref]
[    3.386191] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe9900000-0xe9afffff 64bit pref]
[    3.394077] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe9b00000-0xe9cfffff 64bit pref]
[    3.401961] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    3.407237] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    3.413378] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe30fffff]
[    3.420214] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    3.427165] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    3.433308] pci 0000:00:1c.0:   bridge window [mem 0xe8200000-0xe95fffff]
[    3.440146] pci 0000:00:1c.0:   bridge window [mem 0xe9b00000-0xe9cfffff 64bit pref]
[    3.447949] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    3.453225] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    3.459369] pci 0000:00:1c.1:   bridge window [mem 0xe6e00000-0xe81fffff]
[    3.466206] pci 0000:00:1c.1:   bridge window [mem 0xe9900000-0xe9afffff 64bit pref]
[    3.474012] pci 0000:04:00.0: BAR 16: can't assign mem (size 0x4000000)
[    3.480674] pci 0000:04:00.0: BAR 15: assigned [mem 0xec000000-0xefffffff pref]
[    3.488040] pci 0000:04:00.0: BAR 14: assigned [io  0x2000-0x20ff]
[    3.494269] pci 0000:04:00.0: BAR 13: assigned [io  0x2400-0x24ff]
[    3.500497] pci 0000:04:00.0: CardBus bridge to [bus 05-08]
[    3.506118] pci 0000:04:00.0:   bridge window [io  0x2400-0x24ff]
[    3.512261] pci 0000:04:00.0:   bridge window [io  0x2000-0x20ff]
[    3.518405] pci 0000:04:00.0:   bridge window [mem 0xec000000-0xefffffff pref]
[    3.525687] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    3.530963] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
[    3.537110] pci 0000:00:1c.2:   bridge window [mem 0xe3100000-0xe59fffff]
[    3.543947] pci 0000:00:1c.2:   bridge window [mem 0xec000000-0xefffffff pref]
[    3.551231] pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
[    3.556509] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    3.562654] pci 0000:00:1c.3:   bridge window [mem 0xe5a00000-0xe6dfffff]
[    3.569490] pci 0000:00:1c.3:   bridge window [mem 0xe9700000-0xe98fffff 64bit pref]
[    3.577297] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[    3.582592] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.589343] pci 0000:00:01.0: setting latency timer to 64
[    3.594795] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.601545] pci 0000:00:1c.0: setting latency timer to 64
[    3.607000] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.613752] pci 0000:00:1c.1: setting latency timer to 64
[    3.619209] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.625957] pci 0000:00:1c.2: setting latency timer to 64
[    3.631410] pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.638163] pci 0000:04:00.0: setting latency timer to 64
[    3.643619] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    3.650369] pci 0000:00:1c.3: setting latency timer to 64
[    3.655823] pci 0000:00:1e.0: setting latency timer to 64
[    3.661274] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    3.666894] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    3.672515] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    3.678829] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff]
[    3.685143] pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
[    3.690762] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xe30fffff]
[    3.697077] pci_bus 0000:02: resource 0 [io  0x6000-0x6fff]
[    3.702845] pci_bus 0000:02: resource 1 [mem 0xe8200000-0xe95fffff]
[    3.709159] pci_bus 0000:02: resource 2 [mem 0xe9b00000-0xe9cfffff 64bit pref]
[    3.716436] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    3.722057] pci_bus 0000:03: resource 1 [mem 0xe6e00000-0xe81fffff]
[    3.728372] pci_bus 0000:03: resource 2 [mem 0xe9900000-0xe9afffff 64bit pref]
[    3.735650] pci_bus 0000:04: resource 0 [io  0x2000-0x3fff]
[    3.741272] pci_bus 0000:04: resource 1 [mem 0xe3100000-0xe59fffff]
[    3.747585] pci_bus 0000:04: resource 2 [mem 0xec000000-0xefffffff pref]
[    3.754335] pci_bus 0000:05: resource 0 [io  0x2400-0x24ff]
[    3.759955] pci_bus 0000:05: resource 1 [io  0x2000-0x20ff]
[    3.765576] pci_bus 0000:05: resource 2 [mem 0xec000000-0xefffffff pref]
[    3.772322] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    3.777941] pci_bus 0000:06: resource 1 [mem 0xe5a00000-0xe6dfffff]
[    3.784254] pci_bus 0000:06: resource 2 [mem 0xe9700000-0xe98fffff 64bit pref]
[    3.791531] pci_bus 0000:0c: resource 4 [io  0x0000-0x0cf7]
[    3.797152] pci_bus 0000:0c: resource 5 [io  0x0d00-0xffff]
[    3.802772] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
[    3.809087] pci_bus 0000:0c: resource 7 [mem 0xd0000000-0xfeafffff]
[    3.815426] NET: Registered protocol family 2
[    3.819876] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    3.827183] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    3.834851] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    3.841621] TCP: Hash tables configured (established 131072 bind 65536)
[    3.848282] TCP reno registered
[    3.851472] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    3.857442] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    3.863888] NET: Registered protocol family 1
[    3.868366] pci 0000:01:00.0: Boot video device
[    3.872973] PCI: CLS 64 bytes, default 64
[    3.877071] Trying to unpack rootfs image as initramfs...
[    3.947547] Freeing initrd memory: 3996k freed
[    3.952750] Simple Boot Flag at 0xf1 set to 0x1
[    3.957705] audit: initializing netlink socket (disabled)
[    3.963163] type=2000 audit(1326965749.760:1): initialized
[    3.985260] highmem bounce pool size: 64 pages
[    3.989762] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    3.997275] VFS: Disk quotas dquot_6.5.2
[    4.001291] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    4.008170] fuse init (API version 7.17)
[    4.012231] msgmni has been set to 1703
[    4.016281] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    4.023730] io scheduler noop registered
[    4.027702] io scheduler deadline registered
[    4.032027] io scheduler cfq registered (default)
[    4.036854] pcieport 0000:00:01.0: setting latency timer to 64
[    4.042758] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    4.048275] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.053914] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.060621] intel_idle: MWAIT substates: 0x1120
[    4.065201] intel_idle: v0.4 model 0x25
[    4.069089] intel_idle: lapic_timer_reliable_states 0xffffffff
[    4.075400] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    4.085534] ACPI: AC Adapter [AC] (on-line)
[    4.089864] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    4.098545] ACPI: Lid Switch [LID]
[    4.102030] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    4.110264] ACPI: Power Button [PBTN]
[    4.114002] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    4.122233] ACPI: Sleep Button [SBTN]
[    4.125972] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.133423] ACPI: Power Button [PWRF]
[    4.195570] ERST: Table is not found!
[    4.199361] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.226400] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    4.238444] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    4.248762] ACPI: Battery Slot [BAT0] (battery present)
[    4.483398] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    4.562866] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    4.563899] brd: module loaded
[    4.564452] loop: module loaded
[    4.564719] Fixed MDIO Bus: probed
[    4.564734] tun: Universal TUN/TAP device driver, 1.6
[    4.564735] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    4.564776] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.564792] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.564802] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    4.564806] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    4.564810] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.564854] ehci_hcd 0000:00:1a.0: debug port 2
[    4.568768] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    4.568785] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe9670000
[    4.582489] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    4.582605] hub 1-0:1.0: USB hub found
[    4.582608] hub 1-0:1.0: 3 ports detected
[    4.582665] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.582675] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.582678] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    4.582681] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    4.582722] ehci_hcd 0000:00:1d.0: debug port 2
[    4.586640] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    4.586652] ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe9650000
[    4.602459] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.602537] hub 2-0:1.0: USB hub found
[    4.602539] hub 2-0:1.0: 3 ports detected
[    4.602590] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.602598] uhci_hcd: USB Universal Host Controller Interface driver
[    4.602640] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.602861] i8042: Warning: Keylock active
[    4.604176] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.604180] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.604275] mousedev: PS/2 mouse device common for all mice
[    4.604451] rtc_cmos 00:06: RTC can wake from S4
[    4.604641] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    4.604697] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    4.604777] cpuidle: using governor ladder
[    4.791194] ACPI: Battery Slot [BAT1] (battery absent)
[    4.791344] cpuidle: using governor menu
[    4.791346] EFI Variables Facility v0.08 2004-May-17
[    4.791472] TCP cubic registered
[    4.791550] NET: Registered protocol family 10
[    4.791849] NET: Registered protocol family 17
[    4.791858] Registering the dns_resolver key type
[    4.791870] Using IPI No-Shortcut mode
[    4.791995] PM: Hibernation image not present or could not be loaded.
[    4.792002] registered taskstats version 1
[    4.792698]   Magic number: 12:378:576
[    4.842243] rtc_cmos 00:06: setting system clock to 2012-01-19 09:35:52 UTC (1326965752)
[    4.850732] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    4.860116] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.866173] EDD information not available.
[    4.870595] Freeing unused kernel memory: 556k freed
[    4.875731] Write protecting the kernel text: 4808k
[    4.880719] Write protecting the kernel read-only data: 1908k
[    4.898665] udev[60]: starting version 163
[    4.918198] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[    4.924092] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    4.926901] sdhci: Secure Digital Host Controller Interface driver
[    4.926903] sdhci: Copyright(c) Pierre Ossman
[    4.927120] sdhci-pci 0000:04:00.1: SDHCI controller found [1180:e822] (rev 3)
[    4.927145] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.927185] sdhci-pci 0000:04:00.1: setting latency timer to 64
[    4.927210] mmc0: no vmmc regulator found
[    4.927235] Registered led device: mmc0::
[    4.928287] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
[    4.976727] ahci 0000:00:1f.2: version 3.0
[    4.977863] firewire_ohci 0000:04:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[    4.977873] firewire_ohci 0000:04:00.4: setting latency timer to 64
[    4.978171] Refined TSC clocksource calibration: 2792.981 MHz.
[    4.978178] Switching to clocksource tsc
[    5.005025] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.013643] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    5.021976] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[    5.030251] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[    5.033866] firewire_ohci 0000:04:00.4: irq 42 for MSI/MSI-X
[    5.033927] firewire_ohci: Added fw-ohci device 0000:04:00.4, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
[    5.037690] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    5.060562] ahci 0000:00:1f.2: setting latency timer to 64
[    5.094128] scsi0 : ahci
[    5.096822] scsi1 : ahci
[    5.099495] scsi2 : ahci
[    5.102165] scsi3 : ahci
[    5.104834] scsi4 : ahci
[    5.107498] scsi5 : ahci
[    5.110471] ata1: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640100 irq 41
[    5.117916] ata2: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640180 irq 41
[    5.125361] ata3: DUMMY
[    5.127858] ata4: DUMMY
[    5.130359] ata5: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640300 irq 41
[    5.137803] ata6: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640380 irq 41
[    5.145338] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    5.152356] e1000e 0000:00:19.0: setting latency timer to 64
[    5.158159] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[    5.194110] hub 1-1:1.0: USB hub found
[    5.198104] hub 1-1:1.0: 6 ports detected
[    5.313312] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    5.391704] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 5c:26:0a:4b:44:22
[    5.399760] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    5.406812] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 3041FF-0FF
[    5.449682] hub 2-1:1.0: USB hub found
[    5.453666] hub 2-1:1.0: 8 ports detected
[    5.464989] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.471244] ata5: SATA link down (SStatus 0 SControl 300)
[    5.476791] ata6: SATA link down (SStatus 0 SControl 300)
[    5.482268] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.488499] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    5.497335] ata2.00: ATAPI: HL-DT-ST DVD-ROM DU30N, A100, max UDMA/133
[    5.508107] ata2.00: configured for UDMA/133
[    5.523713] ata1.00: ATA-8: ST9250410AS, D005SDM1, max UDMA/133
[    5.529677] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    5.532896] firewire_core: created device fw0: GUID 065316c1314fc000, S400
[    5.543637] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[    5.545636] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    5.559249] ata1.00: configured for UDMA/133
[    5.563767] scsi 0:0:0:0: Direct-Access     ATA      ST9250410AS      D005 PQ: 0 ANSI: 5
[    5.572026] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    5.572073] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.585012] sd 0:0:0:0: [sda] Write Protect is off
[    5.589886] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.590688] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM DU30N    A100 PQ: 0 ANSI: 5
[    5.603150] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[    5.603157] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.618456] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.623885] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.628626] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.661419] hub 1-1.1:1.0: USB hub found
[    5.665546] hub 1-1.1:1.0: 3 ports detected
[    5.682946]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    5.688150] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.740675] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
[    5.837372] hub 1-1.2:1.0: USB hub found
[    5.841422] hub 1-1.2:1.0: 3 ports detected
[    5.916355] usb 1-1.4: new high-speed USB device number 5 using ehci_hcd
[    6.096069] usb 2-1.7: new full-speed USB device number 3 using ehci_hcd
[    6.224362] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.271754] usb 2-1.8: new full-speed USB device number 4 using ehci_hcd
[    6.394581] usb 2-1.8: config 0 descriptor??
[   13.822641] Adding 5915644k swap on /dev/sda1.  Priority:-1 extents:1 across:5915644k
[   13.828396] udev[300]: starting version 163
[   14.121075] type=1400 audit(1326965761.841:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=489 comm="apparmor_parser"
[   14.134001] type=1400 audit(1326965761.857:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=517 comm="apparmor_parser"
[   14.147188] type=1400 audit(1326965761.869:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=489 comm="apparmor_parser"
[   14.162737] type=1400 audit(1326965761.885:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=517 comm="apparmor_parser"
[   14.178529] type=1400 audit(1326965761.901:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=489 comm="apparmor_parser"
[   14.193641] type=1400 audit(1326965761.913:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=517 comm="apparmor_parser"
[   14.315332] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   14.348050] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   14.351909] bcma-pci-bridge 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   14.351926] bcma-pci-bridge 0000:03:00.0: setting latency timer to 64
[   14.352005] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[   14.352043] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[   14.352135] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[   14.352305] bcma: Switched to core: 0x800
[   14.352321] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[   14.352342] bcma: Switched to core: 0x820
[   14.358583] Linux agpgart interface v0.103
[   14.381524] bcma: Switched to core: 0x800
[   14.384096] bcma: Bus registered
[   14.420123] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   14.427421] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[   14.435574] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   14.475991] input: Dell WMI hotkeys as /devices/virtual/input/input5
[   14.546270] [drm] Initialized drm 1.1.0 20060810
[   14.772745] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   14.780431] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   14.786174] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   15.295927] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478)
[   15.305416] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node f502b738), AE_TIME (20110623/psparse-536)
[   15.317393] ACPI Error: Method parse/execution failed [\ECRB] (Node f502b810), AE_TIME (20110623/psparse-536)
[   15.327613] ACPI Error: Method parse/execution failed [\ECG5] (Node f502b8b8), AE_TIME (20110623/psparse-536)
[   15.337838] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node f502bca8), AE_TIME (20110623/psparse-536)
[   15.348925] ACPI Exception: AE_TIME, Error reading AC Adapter state (20110623/ac-118)
[   17.612430] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   17.620573] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   17.628753] input: HDA Intel Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   17.637398] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   17.647903] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   17.655525] hda_intel: Disabling MSI
[   17.659189] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[   17.828232] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   18.284843] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input10
[   18.302829] acpi device:03: registered as cooling_device4
[   18.342900] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input11
[   18.352983] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   18.877719] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[   18.913652] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[   18.949589] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[   18.985527] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[   19.005646] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   19.016038] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   19.026555] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   19.036881] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[   19.048847] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.055958] nouveau 0000:01:00.0: setting latency timer to 64
[   19.063090] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8600b1)
[   19.074664] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[   19.160380] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   19.166356] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   19.171542] [drm] nouveau 0000:01:00.0: Bios version 70.18.53.00
[   19.177599] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[   19.183481] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[   19.191367] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 048003b6 0f200014
[   19.198288] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02033300 00000000
[   19.205243] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 088223a6 0f220010
[   19.212163] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 08022362 00020010
[   19.219086] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 028113c6 0f220010
[   19.226009] [drm] nouveau 0000:01:00.0: Raw DCB entry 5: 02011382 00020010
[   19.232928] [drm] nouveau 0000:01:00.0: Raw DCB entry 6: 0000000e 00000000
[   19.239847] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[   19.247023] [drm] nouveau 0000:01:00.0:   0: 0x00002047: type 0x47 idx 0 tag 0x08
[   19.254559] [drm] nouveau 0000:01:00.0:   1: 0x00101146: type 0x46 idx 1 tag 0x07
[   19.262092] [drm] nouveau 0000:01:00.0:   2: 0x00410246: type 0x46 idx 2 tag 0x51
[   19.269626] [drm] nouveau 0000:01:00.0:   3: 0x00000300: type 0x00 idx 3 tag 0xff
[   19.277163] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x6F74
[   19.345561] [drm] nouveau 0000:01:00.0: 0x7241: Condition still not met after 20ms, skipping following opcodes
[   19.375417] [drm] nouveau 0000:01:00.0: 0x7245: Condition still not met after 20ms, skipping following opcodes
[   19.405297] [drm] nouveau 0000:01:00.0: 0x73F2: Condition still not met after 20ms, skipping following opcodes
[   19.415349] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x741F
[   19.430756] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x7FCB
[   19.438470] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x7FE4
[   19.488647] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x80CB
[   19.496398] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x8130
[   19.523740] [drm] nouveau 0000:01:00.0: 0x6DE8: Condition still not met after 20ms, skipping following opcodes
[   19.552652] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[   19.559416] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz timing 2 voltage 850mV
[   19.569035] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 405MHz timing 1 voltage 850mV
[   19.578649] [drm] nouveau 0000:01:00.0: 3: core 606MHz shader 1468MHz memory 790MHz timing 0 voltage 1000mV
[   19.588507] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 405MHz voltage 1000mV
[   19.602137] [TTM] Zone  kernel: Available graphics memory: 436472 kiB.
[   19.608710] [TTM] Zone highmem: Available graphics memory: 1680826 kiB.
[   19.615368] [TTM] Initializing pool allocator.
[   19.619869] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[   19.626511] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   19.683579] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[   19.721679] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   19.733559] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   19.740219] [drm] No driver support for vblank timestamp query.
[   19.923941] sshd (790): /proc/790/oom_adj is deprecated, please use /proc/790/oom_score_adj instead.
[   19.994246] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x310000, bo f1383600
[   20.002175] fbcon: nouveaufb (fb0) is primary device
[   20.319091] Console: switching to colour frame buffer device 180x56
[   20.327293] fb0: nouveaufb frame buffer device
[   20.327295] drm: registered panic notifier
[   20.327301] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[   20.344670] dell_wmi: Received unknown WMI event (0x11)
[   20.467523] type=1400 audit(1326965768.201:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=910 comm="apparmor_parser"
[   20.507112] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[   20.566884] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[   20.573174] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.579764] type=1400 audit(1326965768.313:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=921 comm="apparmor_parser"
[   20.600823] type=1400 audit(1326965768.333:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=911 comm="apparmor_parser"
[   20.614269] type=1400 audit(1326965768.345:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=911 comm="apparmor_parser"
[   20.632881] type=1400 audit(1326965768.365:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=911 comm="apparmor_parser"
[   20.691287] type=1400 audit(1326965768.425:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=831 comm="apparmor_parser"
[   20.706734] type=1400 audit(1326965768.441:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=831 comm="apparmor_parser"
[   20.742554] type=1400 audit(1326965768.477:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=914 comm="apparmor_parser"
[   20.757483] type=1400 audit(1326965768.489:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=914 comm="apparmor_parser"
[   23.179490] type=1400 audit(1326965770.917:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=912 comm="apparmor_parser"
[   23.695828] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[   23.705543] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   26.132161] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   26.820446] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[   26.829123] EXT4-fs (sda7): re-mounted. Opts: commit=0
[   34.247153] eth0: no IPv6 routers present

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Arend van Spriel]

On 01/17/2012 02:12 AM, Linus Torvalds wrote:
> 2012/1/16 Arend van Spriel <arend@broadcom.com>:
>>
>> I build a new kernel with MCE enabled. Same issue. I did not load bcma
>> or brcmsmac yet. Attached is trace I could pull from the kernel log
>> (str-test-*).
> 
> Oh well. Everything looks fine in the test traces - the warnings are
> annoying and nasty, but a known issue and not dangerous (and I have a
> patch in my tree to fix them now).
> 
> So if the real suspend fails, it's some other subsystem that has
> gotten broken. I don't think I have any other reports like that yet,
> and there is not a lot to go on. If you could try to bisect it (I
> assume plain Linux-3.2 works fine?) that woudl be wonderful, otherwise
> I think we're stuck waiting for somebody else to hit it and figure it
> out.
> 
>                  Linus
> 

As the patches are in wireless-testing I tested suspend/resume on my
system. Worked fine and NetworkManager reestablished the wireless
connection.

Gr. AvS

Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes

[Linus Torvalds]

2012/1/19 Arend van Spriel <arend@broadcom.com>:
>
> As the patches are in wireless-testing I tested suspend/resume on my
> system. Worked fine and NetworkManager reestablished the wireless
> connection.

Ok, thanks. Let's hope the nvidia problem can be fixed quickly, but at
least we can put the brcmsmac issue to rest.

                            Linus

Re: brcm80211 breakage..

[Henrik Rydberg]

Hi Linus,

Thanks for the MBA31 fixes. Sadly, however, with current git
(27ba234), after encountering the known problem

[  882.064120] bcma: Failed to get SPROM: -71

probing simply fails on my machine,

[  882.064256] bcma-pci-bridge: probe of 0000:01:00.0 failed with error -2

resulting in no wireless. Since the bcma SPROM setup allegedly is
unused, simply ignoring the error with this hack

diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index febbc0a..cb69fb0 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -171,7 +171,6 @@ int bcma_bus_register(struct bcma_bus *bus)
 		pr_err("No SPROM available\n");
 	} else if (err) {
 		pr_err("Failed to get SPROM: %d\n", err);
-		return -ENOENT;
 	}
 
 	/* Register found cores */

makes the device register as

01:00.0 0280: 14e4:4353 (rev 01)
	Subsystem: 106b:00d1
	Kernel driver in use: bcma-pci-bridge

which seems to actually work. Instead of the failed probe, the log shows

[ 1168.048571] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 1168.048706] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 1168.048855] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 1168.049051] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[ 1168.120122] bcma: Failed to get SPROM: -71
[ 1168.120340] bcma: Bus registered
[ 1168.125167] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 23
[ 1168.175670] bcma: Switched to core: 0x812
[ 1168.182061] brcms_module_init: register returned 0

Given that our machines look the same, this is somewhat odd. Could
this be a config issue or did I miss something else?

Henrik

Re: brcm80211 breakage..

[Linus Torvalds]

On Tue, Jan 31, 2012 at 4:08 AM, Henrik Rydberg <rydberg@euromail.se> wrote:
>
> probing simply fails on my machine,
>
> [  882.064120] bcma: Failed to get SPROM: -71
> [  882.064256] bcma-pci-bridge: probe of 0000:01:00.0 failed with error -2
>
> resulting in no wireless. Since the bcma SPROM setup allegedly is
> unused, simply ignoring the error with this hack

I personally hit the "No SPROM available" case, which is apparently
why it works for me.

That said, I obviously agree with your patch: if we don't fail for the
"No SPROM available" case, then we damn well shouldn't fail just
because it *is* available but we can't read it or whatever.

So Ack on the patch from me, but it should go through the network
guys. Arend, John?

                         Linus

> diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
> index febbc0a..cb69fb0 100644
> --- a/drivers/bcma/main.c
> +++ b/drivers/bcma/main.c
> @@ -171,7 +171,6 @@ int bcma_bus_register(struct bcma_bus *bus)
>                pr_err("No SPROM available\n");
>        } else if (err) {
>                pr_err("Failed to get SPROM: %d\n", err);
> -               return -ENOENT;
>        }
>
>        /* Register found cores */

Re: brcm80211 breakage..

[Arend van Spriel]

On 01/31/2012 06:02 PM, Linus Torvalds wrote:
> On Tue, Jan 31, 2012 at 4:08 AM, Henrik Rydberg <rydberg@euromail.se> wrote:
>>
>> probing simply fails on my machine,
>>
>> [  882.064120] bcma: Failed to get SPROM: -71
>> [  882.064256] bcma-pci-bridge: probe of 0000:01:00.0 failed with error -2
>>
>> resulting in no wireless. Since the bcma SPROM setup allegedly is
>> unused, simply ignoring the error with this hack
> 
> I personally hit the "No SPROM available" case, which is apparently
> why it works for me.
> 
> That said, I obviously agree with your patch: if we don't fail for the
> "No SPROM available" case, then we damn well shouldn't fail just
> because it *is* available but we can't read it or whatever.
> 
> So Ack on the patch from me, but it should go through the network
> guys. Arend, John?
> 

The SPROM code in bcma needs some attention, because the availability of
it depends between chipsets. I think in bcma not all variations are
known and thus lacking implementation to handle those. So ultimately
bcma sprom code needs to be extended (looking at brcmsmac code). The
sprom code in brcmsmac can go when that has happened.

I will dive into that. I have not hit the "Failed to get SPROM" case so
any chipset info would be appreciated (Henrik?).

Gr. AvS

Re: brcm80211 breakage..

[John W. Linville]

On Tue, Jan 31, 2012 at 08:08:06PM +0100, Arend van Spriel wrote:
> On 01/31/2012 06:02 PM, Linus Torvalds wrote:
> > On Tue, Jan 31, 2012 at 4:08 AM, Henrik Rydberg <rydberg@euromail.se> wrote:
> >>
> >> probing simply fails on my machine,
> >>
> >> [  882.064120] bcma: Failed to get SPROM: -71
> >> [  882.064256] bcma-pci-bridge: probe of 0000:01:00.0 failed with error -2
> >>
> >> resulting in no wireless. Since the bcma SPROM setup allegedly is
> >> unused, simply ignoring the error with this hack
> > 
> > I personally hit the "No SPROM available" case, which is apparently
> > why it works for me.
> > 
> > That said, I obviously agree with your patch: if we don't fail for the
> > "No SPROM available" case, then we damn well shouldn't fail just
> > because it *is* available but we can't read it or whatever.
> > 
> > So Ack on the patch from me, but it should go through the network
> > guys. Arend, John?
> > 
> 
> The SPROM code in bcma needs some attention, because the availability of
> it depends between chipsets. I think in bcma not all variations are
> known and thus lacking implementation to handle those. So ultimately
> bcma sprom code needs to be extended (looking at brcmsmac code). The
> sprom code in brcmsmac can go when that has happened.
> 
> I will dive into that. I have not hit the "Failed to get SPROM" case so
> any chipset info would be appreciated (Henrik?).

Making the SPROM code be better informed sounds great.  In the
meantime, Henrik's patch seems reasonable.  Any objections?

---

>From 1f3587dd7cdb8e2a505c76041bd5b816e7bcfb67 Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Tue, 31 Jan 2012 14:22:15 -0500
Subject: [PATCH] bcma: don't fail for bad SPROM CRC

If it is OK not to have an SPROM, it should be OK to have a bad one...?

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
Henrik, may I add a Signed-off-by line for you?

 drivers/bcma/main.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index febbc0a..ec31f7d 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -169,10 +169,8 @@ int bcma_bus_register(struct bcma_bus *bus)
 	err = bcma_sprom_get(bus);
 	if (err == -ENOENT) {
 		pr_err("No SPROM available\n");
-	} else if (err) {
+	} else if (err)
 		pr_err("Failed to get SPROM: %d\n", err);
-		return -ENOENT;
-	}
 
 	/* Register found cores */
 	bcma_register_cores(bus);
-- 
1.7.4.4

-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re: brcm80211 breakage..

[Arend van Spriel]

On 01/31/2012 08:25 PM, John W. Linville wrote:
> On Tue, Jan 31, 2012 at 08:08:06PM +0100, Arend van Spriel wrote:
>> On 01/31/2012 06:02 PM, Linus Torvalds wrote:
>>> On Tue, Jan 31, 2012 at 4:08 AM, Henrik Rydberg <rydberg@euromail.se> wrote:
>>>>
>>>> probing simply fails on my machine,
>>>>
>>>> [  882.064120] bcma: Failed to get SPROM: -71
>>>> [  882.064256] bcma-pci-bridge: probe of 0000:01:00.0 failed with error -2
>>>>
>>>> resulting in no wireless. Since the bcma SPROM setup allegedly is
>>>> unused, simply ignoring the error with this hack
>>>
>>> I personally hit the "No SPROM available" case, which is apparently
>>> why it works for me.
>>>
>>> That said, I obviously agree with your patch: if we don't fail for the
>>> "No SPROM available" case, then we damn well shouldn't fail just
>>> because it *is* available but we can't read it or whatever.
>>>
>>> So Ack on the patch from me, but it should go through the network
>>> guys. Arend, John?
>>>
>>
>> The SPROM code in bcma needs some attention, because the availability of
>> it depends between chipsets. I think in bcma not all variations are
>> known and thus lacking implementation to handle those. So ultimately
>> bcma sprom code needs to be extended (looking at brcmsmac code). The
>> sprom code in brcmsmac can go when that has happened.
>>
>> I will dive into that. I have not hit the "Failed to get SPROM" case so
>> any chipset info would be appreciated (Henrik?).
> 
> Making the SPROM code be better informed sounds great.  In the
> meantime, Henrik's patch seems reasonable.  Any objections?
> 

Yeah. Forgot to mention, but as it does not break stuff Ack from me.

Gr. AvS

Re: brcm80211 breakage..

[Henrik Rydberg]

> > So Ack on the patch from me, but it should go through the network
> > guys. Arend, John?
> > 
> 
> The SPROM code in bcma needs some attention, because the availability of
> it depends between chipsets. I think in bcma not all variations are
> known and thus lacking implementation to handle those. So ultimately
> bcma sprom code needs to be extended (looking at brcmsmac code). The
> sprom code in brcmsmac can go when that has happened.
> 
> I will dive into that. I have not hit the "Failed to get SPROM" case so
> any chipset info would be appreciated (Henrik?).

I guess my first mail never reached the netdev mailinglist. This is
also a MacbookAir3,1. Booting from EFI looks like this:

[    0.429827] bcma-pci-bridge 0000:01:00.0: enabling device (0000 -> 0002)
[    0.430083] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[    0.430105] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[    0.430147] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[    0.430234] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[    0.499963] bcma: Failed to get SPROM: -71
[    0.500042] bcma: Bus registered
[    0.619721] bcma-pci-bridge 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.487946] usbcore: registered new interface driver bcm5974
[    2.569391] input: bcm5974 as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input7
[    4.857363] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 21
[    4.931854] bcma: Switched to core: 0x812
[    4.939215] brcms_module_init: register returned 0

And the lspci entry looks like this:

01:00.0 0280: 14e4:4353 (rev 01)
	Subsystem: 106b:00d1
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at 93100000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: bcma-pci-bridge

Booting from BIOS is almost the identical, only different irq assignments.

Thanks,
Henrik

Re: brcm80211 breakage..

[Arend van Spriel]

On 01/31/2012 08:36 PM, Henrik Rydberg wrote:
>>> So Ack on the patch from me, but it should go through the network
>>> guys. Arend, John?
>>>
>>
>> The SPROM code in bcma needs some attention, because the availability of
>> it depends between chipsets. I think in bcma not all variations are
>> known and thus lacking implementation to handle those. So ultimately
>> bcma sprom code needs to be extended (looking at brcmsmac code). The
>> sprom code in brcmsmac can go when that has happened.
>>
>> I will dive into that. I have not hit the "Failed to get SPROM" case so
>> any chipset info would be appreciated (Henrik?).
> 
> I guess my first mail never reached the netdev mailinglist. This is
> also a MacbookAir3,1. Booting from EFI looks like this:

It may have. I am not on that particular mailing list (maybe should) and
google did not help me find it. Thanks for the details.

Gr. AvS

Re: brcm80211 breakage..

[Henrik Rydberg]

> From 1f3587dd7cdb8e2a505c76041bd5b816e7bcfb67 Mon Sep 17 00:00:00 2001
> From: Henrik Rydberg <rydberg@euromail.se>
> Date: Tue, 31 Jan 2012 14:22:15 -0500
> Subject: [PATCH] bcma: don't fail for bad SPROM CRC
> 
> If it is OK ...?

How about this:

The brcmsmac driver is now using the bcma SPROM logic, which does not
recognize all chipsets that were functional prior to the switch. In
particular, the current code bails out on odd CRC errors in recent
Macbooks. This patch ignores those errors, with the argument that an
unrecognized SPROM should be treated similarly to a non-existing one.

> 
> Signed-off-by: John W. Linville <linville@tuxdriver.com>
> ---
> Henrik, may I add a Signed-off-by line for you?

By all means, thanks.

>  drivers/bcma/main.c |    4 +---
>  1 files changed, 1 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
> index febbc0a..ec31f7d 100644
> --- a/drivers/bcma/main.c
> +++ b/drivers/bcma/main.c
> @@ -169,10 +169,8 @@ int bcma_bus_register(struct bcma_bus *bus)
>  	err = bcma_sprom_get(bus);
>  	if (err == -ENOENT) {
>  		pr_err("No SPROM available\n");
> -	} else if (err) {
> +	} else if (err)
>  		pr_err("Failed to get SPROM: %d\n", err);
> -		return -ENOENT;
> -	}
>  
>  	/* Register found cores */
>  	bcma_register_cores(bus);
> -- 
> 1.7.4.4

Henrik

Re: brcm80211 breakage..

[Arend van Spriel]

On 01/31/2012 08:58 PM, Henrik Rydberg wrote:
>> From 1f3587dd7cdb8e2a505c76041bd5b816e7bcfb67 Mon Sep 17 00:00:00 2001
>> From: Henrik Rydberg <rydberg@euromail.se>
>> Date: Tue, 31 Jan 2012 14:22:15 -0500
>> Subject: [PATCH] bcma: don't fail for bad SPROM CRC
>>
>> If it is OK ...?
> 
> How about this:
> 
> The brcmsmac driver is now using the bcma SPROM logic, which does not
> recognize all chipsets that were functional prior to the switch. In
> particular, the current code bails out on odd CRC errors in recent
> Macbooks. This patch ignores those errors, with the argument that an
> unrecognized SPROM should be treated similarly to a non-existing one.
>

Not entirely correct. BCMA sprom logic is currently not used by
brcmsmac, but it sure (as hell) makes sense to do so. Currently, the
bcma SPROM logic is used in SoC chipsets (bcm47xx) and the b43 driver.

Gr. AvS

Re: brcm80211 breakage..

[Henrik Rydberg]

> > The brcmsmac driver is now using the bcma SPROM logic, which does not
> > recognize all chipsets that were functional prior to the switch. In
> > particular, the current code bails out on odd CRC errors in recent
> > Macbooks. This patch ignores those errors, with the argument that an
> > unrecognized SPROM should be treated similarly to a non-existing one.
> >
> 
> Not entirely correct. BCMA sprom logic is currently not used by
> brcmsmac, but it sure (as hell) makes sense to do so. Currently, the
> bcma SPROM logic is used in SoC chipsets (bcm47xx) and the b43 driver.

Let's change that to "bcma SPROM CRC check", then. With -rc2 just out, I
take it the patch will appear in -rc3?

Thanks,
Henrik