From mboxrd@z Thu Jan 1 00:00:00 1970 From: Will Deacon Subject: Re: [PATCH] net: smsc911x: fix RX FIFO fastforwarding when dropping packets Date: Thu, 12 Apr 2012 13:53:55 +0100 Message-ID: <20120412125355.GG16025@mudshark.cambridge.arm.com> References: <1334221644-16056-1-git-send-email-will.deacon@arm.com> <1334222448.5300.6046.camel@edumazet-glaptop> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: "netdev@vger.kernel.org" , Steve Glendinning To: Eric Dumazet Return-path: Received: from cam-admin0.cambridge.arm.com ([217.140.96.50]:60195 "EHLO cam-admin0.cambridge.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933741Ab2DLMx7 (ORCPT ); Thu, 12 Apr 2012 08:53:59 -0400 Content-Disposition: inline In-Reply-To: <1334222448.5300.6046.camel@edumazet-glaptop> Sender: netdev-owner@vger.kernel.org List-ID: Hi Eric, Thanks for taking a look. On Thu, Apr 12, 2012 at 10:20:48AM +0100, Eric Dumazet wrote: > On Thu, 2012-04-12 at 10:07 +0100, Will Deacon wrote: > > diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c > > index 4a69710..b5599bc 100644 > > --- a/drivers/net/ethernet/smsc/smsc911x.c > > +++ b/drivers/net/ethernet/smsc/smsc911x.c > > @@ -1228,7 +1228,7 @@ static int smsc911x_poll(struct napi_struct *napi, int budget) > > "Discarding packet with error bit set"); > > /* Packet has an error, discard it and continue with > > * the next */ > > - smsc911x_rx_fastforward(pdata, pktwords); > > + smsc911x_rx_fastforward(pdata, pktlength); > > dev->stats.rx_dropped++; > > continue; > > } [...] > Hum, looking at this driver, I see wrong code in lines 1246/1247 > > skb->data = skb->head; > skb_reset_tail_pointer(skb); > > I suspect its hiding a buffer overflow bug or something. Yes, you're right. > netdev_alloc_skb() reserved NET_SKB_PAD bytes. A driver should not > un-reserve this headroom, or some networking setups can be very slow. > > So > > pdata->ops->rx_readfifo(pdata, > (unsigned int *)skb->head, pktwords); > > also should be fixed to use skb->data instead. Right, this seems to do the trick (and can replace my original patch by actually passing in the number of words to the fastforward function). I'm not sure whether the skb_trim is really required, but it makes the data format slightly clearer. It would be nice to get some input from Steve, but his email address seems to be bouncing at the moment. Will diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 4a69710..3f43c24 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1166,10 +1166,8 @@ smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat) /* Quickly dumps bad packets */ static void -smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes) +smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktwords) { - unsigned int pktwords = (pktbytes + NET_IP_ALIGN + 3) >> 2; - if (likely(pktwords >= 4)) { unsigned int timeout = 500; unsigned int val; @@ -1233,7 +1231,7 @@ static int smsc911x_poll(struct napi_struct *napi, int budget) continue; } - skb = netdev_alloc_skb(dev, pktlength + NET_IP_ALIGN); + skb = netdev_alloc_skb(dev, pktwords << 2); if (unlikely(!skb)) { SMSC_WARN(pdata, rx_err, "Unable to allocate skb for rx packet"); @@ -1243,21 +1241,19 @@ static int smsc911x_poll(struct napi_struct *napi, int budget) break; } - skb->data = skb->head; - skb_reset_tail_pointer(skb); - - /* Align IP on 16B boundary */ - skb_reserve(skb, NET_IP_ALIGN); - skb_put(skb, pktlength - 4); + skb_put(skb, pktwords << 2); pdata->ops->rx_readfifo(pdata, - (unsigned int *)skb->head, pktwords); + (unsigned int *)skb->data, pktwords); + skb_pull(skb, NET_IP_ALIGN); + skb_trim(skb, pktlength); + skb->protocol = eth_type_trans(skb, dev); skb_checksum_none_assert(skb); netif_receive_skb(skb); /* Update counters */ dev->stats.rx_packets++; - dev->stats.rx_bytes += (pktlength - 4); + dev->stats.rx_bytes += pktlength; } /* Return total received packets */ @@ -1565,7 +1561,7 @@ static int smsc911x_open(struct net_device *dev) smsc911x_reg_write(pdata, FIFO_INT, temp); /* set RX Data offset to 2 bytes for alignment */ - smsc911x_reg_write(pdata, RX_CFG, (2 << 8)); + smsc911x_reg_write(pdata, RX_CFG, (NET_IP_ALIGN << 8)); /* enable NAPI polling before enabling RX interrupts */ napi_enable(&pdata->napi);