From: Steven Rostedt <rostedt@goodmis.org>
To: Glauber Costa <glommer@parallels.com>
Cc: cgroups@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, Li Zefan <lizefan@huawei.com>,
Tejun Heo <tj@kernel.org>,
kamezawa.hiroyu@jp.fujitsu.com, linux-mm@kvack.org,
devel@openvz.org, Johannes Weiner <hannes@cmpxchg.org>,
Michal Hocko <mhocko@suse.cz>, Ingo Molnar <mingo@elte.hu>,
Jason Baron <jbaron@redhat.com>
Subject: Re: [PATCH v4 1/3] make jump_labels wait while updates are in place
Date: Thu, 26 Apr 2012 20:43:06 -0400 [thread overview]
Message-ID: <20120427004305.GC23877@home.goodmis.org> (raw)
In-Reply-To: <1335480667-8301-2-git-send-email-glommer@parallels.com>
On Thu, Apr 26, 2012 at 07:51:05PM -0300, Glauber Costa wrote:
> In mem cgroup, we need to guarantee that two concurrent updates
> of the jump_label interface wait for each other. IOW, we can't have
> other updates returning while the first one is still patching the
> kernel around, otherwise we'll race.
But it shouldn't. The code as is should prevent that.
>
> I believe this is something that can fit well in the static branch
> API, without noticeable disadvantages:
>
> * in the common case, it will be a quite simple lock/unlock operation
> * Every context that calls static_branch_slow* already expects to be
> in sleeping context because it will mutex_lock the unlikely case.
> * static_key_slow_inc is not expected to be called in any fast path,
> otherwise it would be expected to have quite a different name. Therefore
> the mutex + atomic combination instead of just an atomic should not kill
> us.
>
> Signed-off-by: Glauber Costa <glommer@parallels.com>
> CC: Tejun Heo <tj@kernel.org>
> CC: Li Zefan <lizefan@huawei.com>
> CC: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
> CC: Johannes Weiner <hannes@cmpxchg.org>
> CC: Michal Hocko <mhocko@suse.cz>
> CC: Ingo Molnar <mingo@elte.hu>
> CC: Jason Baron <jbaron@redhat.com>
> ---
> kernel/jump_label.c | 21 +++++++++++----------
> 1 files changed, 11 insertions(+), 10 deletions(-)
>
> diff --git a/kernel/jump_label.c b/kernel/jump_label.c
> index 4304919..5d09cb4 100644
> --- a/kernel/jump_label.c
> +++ b/kernel/jump_label.c
> @@ -57,17 +57,16 @@ static void jump_label_update(struct static_key *key, int enable);
>
> void static_key_slow_inc(struct static_key *key)
> {
> + jump_label_lock();
> if (atomic_inc_not_zero(&key->enabled))
> - return;
If key->enabled is not zero, there's nothing to be done. As the jump
label has already been enabled. Note, the key->enabled doesn't get set
until after the jump label is updated. Thus, if two tasks were to come
in, they both would be locked on the jump_label_lock().
> + goto out;
>
> - jump_label_lock();
> - if (atomic_read(&key->enabled) == 0) {
> - if (!jump_label_get_branch_default(key))
> - jump_label_update(key, JUMP_LABEL_ENABLE);
> - else
> - jump_label_update(key, JUMP_LABEL_DISABLE);
> - }
> + if (!jump_label_get_branch_default(key))
> + jump_label_update(key, JUMP_LABEL_ENABLE);
> + else
> + jump_label_update(key, JUMP_LABEL_DISABLE);
> atomic_inc(&key->enabled);
> +out:
> jump_label_unlock();
> }
> EXPORT_SYMBOL_GPL(static_key_slow_inc);
> @@ -75,10 +74,11 @@ EXPORT_SYMBOL_GPL(static_key_slow_inc);
> static void __static_key_slow_dec(struct static_key *key,
> unsigned long rate_limit, struct delayed_work *work)
> {
> - if (!atomic_dec_and_mutex_lock(&key->enabled, &jump_label_mutex)) {
> + jump_label_lock();
> + if (atomic_dec_and_test(&key->enabled)) {
> WARN(atomic_read(&key->enabled) < 0,
> "jump label: negative count!\n");
> - return;
Here, it is similar. If enabled is > 1, it wouldn't need to do anything,
thus it would dec the counter and return. But if it were one, then the
lock would be taken. and set to zero. There shouldn't be a case where
two tasks came in to set it less than zero (then something is
unbalanced).
Are you hitting the WARN_ON?
-- Steve
> + goto out;
> }
>
> if (rate_limit) {
> @@ -90,6 +90,7 @@ static void __static_key_slow_dec(struct static_key *key,
> else
> jump_label_update(key, JUMP_LABEL_ENABLE);
> }
> +out:
> jump_label_unlock();
> }
>
> --
> 1.7.7.6
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2012-04-27 0:43 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-26 22:51 [PATCH v4 0/3] fix problem with static_branch() for sock memcg Glauber Costa
2012-04-26 22:51 ` [PATCH v4 1/3] make jump_labels wait while updates are in place Glauber Costa
2012-04-27 0:43 ` Steven Rostedt [this message]
2012-04-27 1:05 ` KAMEZAWA Hiroyuki
2012-04-27 13:53 ` Jason Baron
2012-04-27 14:07 ` Steven Rostedt
2012-04-27 14:59 ` Glauber Costa
2012-04-26 22:51 ` [PATCH v4 2/3] Always free struct memcg through schedule_work() Glauber Costa
2012-04-26 22:51 ` [PATCH v4 3/3] decrement static keys on real destroy time Glauber Costa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120427004305.GC23877@home.goodmis.org \
--to=rostedt@goodmis.org \
--cc=cgroups@vger.kernel.org \
--cc=devel@openvz.org \
--cc=glommer@parallels.com \
--cc=hannes@cmpxchg.org \
--cc=jbaron@redhat.com \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=lizefan@huawei.com \
--cc=mhocko@suse.cz \
--cc=mingo@elte.hu \
--cc=netdev@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).