From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Hemminger Subject: Re: [RFT] sky2: fix status length check on older chips Date: Fri, 27 Apr 2012 13:55:14 -0700 Message-ID: <20120427135514.48b03ce8@nehalam.linuxnetplumber.net> References: <4F9AFE4E.8010108@linuxsystems.it> <20120427134127.6d536a96@nehalam.linuxnetplumber.net> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: =?ISO-8859-1?B?TmljY29s8g==?= Belli , netdev@vger.kernel.org To: Stephen Hemminger Return-path: Received: from mail.vyatta.com ([76.74.103.46]:49740 "EHLO mail.vyatta.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751090Ab2D0UzS (ORCPT ); Fri, 27 Apr 2012 16:55:18 -0400 In-Reply-To: <20120427134127.6d536a96@nehalam.linuxnetplumber.net> Sender: netdev-owner@vger.kernel.org List-ID: Mirko and I were working on a related issue, here is his fix. I proposed a similar alternative, but he was unavailable to test it, and therefore was still pending. Does this fix your problem? Resend with missing bits. The cleaner alternative is to not use the boolean flag, but instead put tag on skb directly (eliminating rx_tag and rx_vlan from data structure). ================= From: From: Mirko Lindner Bug: The VLAN bit of the MAC RX Status Word is unreliable in several older supported chips. Sometimes the VLAN bit is not set for valid VLAN packets and also sometimes the VLAN bit is set for non-VLAN packets that came after a VLAN packet. This results in a receive length error when VLAN hardware tagging is enabled. Fix: The driver uses only VLAN information included in VLAN status list elements, that signals that the VLAN tag field is valid. It must ignore the VLAN bit in the MAC RX Status Word. An additional variable set when evaluating the VLAN opcodes is used to indicate that the received packet is a VLAN packet and a packet length correction (subtraction of VLAN header length) must be done. Signed-off-by: Mirko Lindner Signed-off-by: Stephen Hemminger --- --- a/drivers/net/ethernet/marvell/sky2.c 2012-04-18 23:44:40.637276647 -0700 +++ b/drivers/net/ethernet/marvell/sky2.c 2012-04-27 13:52:06.154756866 -0700 @@ -2580,7 +2580,7 @@ static struct sk_buff *sky2_receive(stru struct sk_buff *skb = NULL; u16 count = (status & GMR_FS_LEN) >> 16; - if (status & GMR_FS_VLAN) + if (sky2->rx_vlan) count -= VLAN_HLEN; /* Account for vlan tag */ netif_printk(sky2, rx_status, KERN_DEBUG, dev, @@ -2646,11 +2646,13 @@ static inline void sky2_tx_done(struct n } } -static inline void sky2_skb_rx(const struct sky2_port *sky2, - u32 status, struct sk_buff *skb) +static inline void sky2_skb_rx(struct sky2_port *sky2, + struct sk_buff *skb) { - if (status & GMR_FS_VLAN) + if (sky2->rx_vlan) { __vlan_hwaccel_put_tag(skb, be16_to_cpu(sky2->rx_tag)); + sky2->rx_vlan = 0; + } if (skb->ip_summed == CHECKSUM_NONE) netif_receive_skb(skb); @@ -2772,10 +2774,12 @@ static int sky2_status_intr(struct sky2_ break; case OP_RXVLAN: + sky2->rx_vlan = 1; sky2->rx_tag = length; break; case OP_RXCHKSVLAN: + sky2->rx_vlan = 1; sky2->rx_tag = length; /* fall through */ case OP_RXCHKS: --- a/drivers/net/ethernet/marvell/sky2.h 2012-02-13 09:23:53.642447236 -0800 +++ b/drivers/net/ethernet/marvell/sky2.h 2012-04-27 13:36:07.487834432 -0700 @@ -2242,6 +2242,7 @@ struct sky2_port { u16 rx_data_size; u16 rx_nfrags; u16 rx_tag; + u8 rx_vlan; struct { unsigned long last;