From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Hemminger Subject: Re: [PATCH] bridge: make brctl showstp display port id Date: Tue, 1 May 2012 10:39:55 -0700 Message-ID: <20120501103955.1553a9cb@s6510.linuxnetplumber.net> References: <1335775148-5191-1-git-send-email-Joakim.Tjernlund@transmode.se> <20120430090747.1d64198b@nehalam.linuxnetplumber.net> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: "netdev@vger.kernel.org" To: Joakim Tjernlund Return-path: Received: from mail.vyatta.com ([76.74.103.46]:56975 "EHLO mail.vyatta.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754405Ab2EARkA (ORCPT ); Tue, 1 May 2012 13:40:00 -0400 In-Reply-To: Sender: netdev-owner@vger.kernel.org List-ID: On Tue, 1 May 2012 16:38:34 +0200 Joakim Tjernlund wrote: > Stephen Hemminger wrote on 2012/04/30 18:07:47: > > > > On Mon, 30 Apr 2012 10:39:08 +0200 > > Joakim Tjernlund wrote: > > > > > My brctl showstp br0 always shows a 0 port id: > > > eth2 (1) > > > port id 0 state disabled > > > designated root 8000.00069c00b2fb path cost 100 > > > > > > because port id is printed as a hex number in sys fs. Change the > > > two hex occurrences(port no and port id) to decimal, just like all > > > the other numbers in this area. > > > > > > Signed-off-by: Joakim Tjernlund > > > --- > > > net/bridge/br_sysfs_if.c | 4 ++-- > > > 1 files changed, 2 insertions(+), 2 deletions(-) > > > > > > diff --git a/net/bridge/br_sysfs_if.c b/net/bridge/br_sysfs_if.c > > > index fd5799c..9c4c2eb 100644 > > > --- a/net/bridge/br_sysfs_if.c > > > +++ b/net/bridge/br_sysfs_if.c > > > @@ -86,13 +86,13 @@ static BRPORT_ATTR(designated_cost, S_IRUGO, show_designated_cost, NULL); > > > > > > static ssize_t show_port_id(struct net_bridge_port *p, char *buf) > > > { > > > - return sprintf(buf, "0x%x\n", p->port_id); > > > + return sprintf(buf, "%d\n", p->port_id); > > > } > > > static BRPORT_ATTR(port_id, S_IRUGO, show_port_id, NULL); > > > > > > static ssize_t show_port_no(struct net_bridge_port *p, char *buf) > > > { > > > - return sprintf(buf, "0x%x\n", p->port_no); > > > + return sprintf(buf, "%d\n", p->port_no); > > > } > > > > > > static BRPORT_ATTR(port_no, S_IRUGO, show_port_no, NULL); > > > > No. This would be a visible change to applications. > > The bridge utilities should be fixed instead. > > Well, my reasoning was that if not the native tools got this right, what are the > chances that other apps got it right? I don't know any other apps than > brctl using this info, do you? We could check one or two apps to see what they do. > > Jocke > Current bridge-utils does not have the issue. It has been fixed for 5 years. The problem was fixed by: commit 0397c6aa48769505e6aa4481f0786c8f4eaaf890 Author: Jeremy Jackson Date: Tue May 8 11:10:34 2007 -0700 I've noticed for a while that output is showing 0 for port_no and port_id It seems that somewhere in 2.6 sysfs land the following items got printed in hexadecimal, and brctl code was parsing for decimal only doug:/sys/class/net/eth0/brport# cat port_id 0x8001 doug:/sys/class/net/eth0/brport# cat port_no 0x1