[net-next v2 0/7][pull request] Intel Wired LAN Driver Updates

[net-next v2 0/7][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

The following series contains updates to igb and e1000e.
Majority of the updates are to e1000e and do the following:
 - several cleanups which remove unnecessary () and returns from void
   functions
 - remove test that is always false
 - use 'true' instead of '1' for boolean
The one igb fix resolves warning about unused function.

v2- updated patch 4 based on feedback from community

The following are changes since commit 4cbbb04dc115423682349aa7466c8aeead825140:
  cnic: Update VLAN ID during ISCSI_UEVENT_PATH_UPDATE
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Bruce Allan (6):
  e1000e: remove test that is always false
  e1000e: remove unnecessary returns from void functions
  e1000e: remove unnecessary parentheses
  e1000e: use true/false for bool autoneg_false
  e1000e: pass pointer to hw struct for e1000_init_mac_params_XXX()
  e1000e: replace '1' with 'true' for boolean get_link_status

Emil Tantilov (1):
  igb: fix warning about unused function

 drivers/net/ethernet/intel/e1000e/80003es2lan.c |    7 ++---
 drivers/net/ethernet/intel/e1000e/82571.c       |    9 +++---
 drivers/net/ethernet/intel/e1000e/ethtool.c     |    4 +-
 drivers/net/ethernet/intel/e1000e/ich8lan.c     |    8 +----
 drivers/net/ethernet/intel/e1000e/mac.c         |   32 ++++++++++-------------
 drivers/net/ethernet/intel/e1000e/manage.c      |    2 +-
 drivers/net/ethernet/intel/e1000e/netdev.c      |   13 +++-----
 drivers/net/ethernet/intel/e1000e/phy.c         |   12 ++++----
 drivers/net/ethernet/intel/igb/igb_main.c       |    4 +++
 9 files changed, 41 insertions(+), 50 deletions(-)

-- 
1.7.7.6

Re: [net-next v2 0/7][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Fri, 10 Feb 2012 00:08:50 -0800

> The following series contains updates to igb and e1000e.
> Majority of the updates are to e1000e and do the following:
>  - several cleanups which remove unnecessary () and returns from void
>    functions
>  - remove test that is always false
>  - use 'true' instead of '1' for boolean
> The one igb fix resolves warning about unused function.
> 
> v2- updated patch 4 based on feedback from community
> 
> The following are changes since commit 4cbbb04dc115423682349aa7466c8aeead825140:
>   cnic: Update VLAN ID during ISCSI_UEVENT_PATH_UPDATE
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks Jeff.

[net-next v2 0/7][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series of patches contains updates for e1000e and ixgbe.
Patch 4 & 5 integrate the hwmon interface for ixgbe as Ben Hutchings
has done for other drivers.

v2: dropped the ixgbe patch which added the sysfs interface

The following are changes since commit e4ae004b84b315dd4b762e474f97403eac70f76a:
  netem: add ECN capability
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Bruce Allan (3):
  e1000e: workaround EEPROM configuration change on 82579
  e1000e: PHY initialization flow changes for 82577/8/9
  e1000e: fix .ndo_set_rx_mode for 82579

Don Skidmore (2):
  ixgbe: add support functions to access thermal data
  ixgbe: add hwmon interface to export thermal data

Greg Rose (2):
  ixgbe: Deny MACVLAN requests from VFs with admin set MAC
  ixgbe: Reset max_vfs to zero when user request is out of range

 drivers/net/ethernet/intel/Kconfig              |    8 +
 drivers/net/ethernet/intel/e1000e/80003es2lan.c |    1 +
 drivers/net/ethernet/intel/e1000e/82571.c       |    4 +-
 drivers/net/ethernet/intel/e1000e/e1000.h       |    2 +-
 drivers/net/ethernet/intel/e1000e/hw.h          |    6 +
 drivers/net/ethernet/intel/e1000e/ich8lan.c     |  339 ++++++++++++++++-------
 drivers/net/ethernet/intel/e1000e/mac.c         |   10 +-
 drivers/net/ethernet/intel/e1000e/netdev.c      |   12 +-
 drivers/net/ethernet/intel/ixgbe/Makefile       |    2 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe.h        |   26 ++
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c  |    2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c  |    2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c |  169 +++++++++++
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.h |   13 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c   |   13 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c  |    6 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c  |  271 ++++++++++++++++++
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h   |   40 +++
 drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c   |    2 +
 19 files changed, 808 insertions(+), 120 deletions(-)
 create mode 100644 drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c

-- 
1.7.7.6

[net-next 1/7] e1000e: workaround EEPROM configuration change on 82579

[Jeff Kirsher]

From: Bruce Allan <bruce.w.allan@intel.com>

An update to the EEPROM on 82579 will extend a delay in hardware to fix an
issue with WoL not working after a G3->S5 transition which is unrelated to
the driver.  However, this extended delay conflicts with nominal operation
of the device when it is initialized by the driver and after every reset
of the hardware (i.e. the driver starts configuring the device before the
hardware is done with it's own configuration work).  The workaround for
when the driver is in control of the device is to tell the hardware after
every reset the configuration delay should be the original shorter one.

Some pre-existing variables are renamed generically to be re-used with
new register accesses.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/hw.h      |    1 +
 drivers/net/ethernet/intel/e1000e/ich8lan.c |   48 ++++++++++++++++++--------
 2 files changed, 34 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index 7ca1b68..3a5acb5 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -51,6 +51,7 @@ enum e1e_registers {
 	E1000_FEXTNVM  = 0x00028, /* Future Extended NVM - RW */
 	E1000_FCT      = 0x00030, /* Flow Control Type - RW */
 	E1000_VET      = 0x00038, /* VLAN Ether Type - RW */
+	E1000_FEXTNVM3 = 0x0003C, /* Future Extended NVM 3 - RW */
 	E1000_ICR      = 0x000C0, /* Interrupt Cause Read - R/clr */
 	E1000_ITR      = 0x000C4, /* Interrupt Throttling Rate - RW */
 	E1000_ICS      = 0x000C8, /* Interrupt Cause Set - WO */
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index d7fd1e8..2506ee2 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -105,6 +105,9 @@
 #define E1000_FEXTNVM_SW_CONFIG		1
 #define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */
 
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK    0x0C000000
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC  0x08000000
+
 #define E1000_FEXTNVM4_BEACON_DURATION_MASK    0x7
 #define E1000_FEXTNVM4_BEACON_DURATION_8USEC   0x7
 #define E1000_FEXTNVM4_BEACON_DURATION_16USEC  0x3
@@ -286,16 +289,23 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
 
 static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw)
 {
-	u32 ctrl;
+	u32 reg;
 
-	ctrl = er32(CTRL);
-	ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
-	ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
-	ew32(CTRL, ctrl);
+	/* Set Phy Config Counter to 50msec */
+	reg = er32(FEXTNVM3);
+	reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
+	reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
+	ew32(FEXTNVM3, reg);
+
+	/* Toggle LANPHYPC Value bit */
+	reg = er32(CTRL);
+	reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
+	reg &= ~E1000_CTRL_LANPHYPC_VALUE;
+	ew32(CTRL, reg);
 	e1e_flush();
 	udelay(10);
-	ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
-	ew32(CTRL, ctrl);
+	reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
+	ew32(CTRL, reg);
 }
 
 /**
@@ -3071,8 +3081,8 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
 static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 {
 	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
-	u16 reg;
-	u32 ctrl, kab;
+	u16 kum_cfg;
+	u32 ctrl, reg;
 	s32 ret_val;
 
 	/*
@@ -3106,12 +3116,12 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	}
 
 	if (hw->mac.type == e1000_pchlan) {
-		/* Save the NVM K1 bit setting*/
-		ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, &reg);
+		/* Save the NVM K1 bit setting */
+		ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, &kum_cfg);
 		if (ret_val)
 			return ret_val;
 
-		if (reg & E1000_NVM_K1_ENABLE)
+		if (kum_cfg & E1000_NVM_K1_ENABLE)
 			dev_spec->nvm_k1_enabled = true;
 		else
 			dev_spec->nvm_k1_enabled = false;
@@ -3141,6 +3151,14 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	/* cannot issue a flush here because it hangs the hardware */
 	msleep(20);
 
+	/* Set Phy Config Counter to 50msec */
+	if (hw->mac.type == e1000_pch2lan) {
+		reg = er32(FEXTNVM3);
+		reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
+		reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
+		ew32(FEXTNVM3, reg);
+	}
+
 	if (!ret_val)
 		clear_bit(__E1000_ACCESS_SHARED_RESOURCE, &hw->adapter->state);
 
@@ -3165,9 +3183,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	ew32(IMC, 0xffffffff);
 	er32(ICR);
 
-	kab = er32(KABGTXD);
-	kab |= E1000_KABGTXD_BGSQLBIAS;
-	ew32(KABGTXD, kab);
+	reg = er32(KABGTXD);
+	reg |= E1000_KABGTXD_BGSQLBIAS;
+	ew32(KABGTXD, reg);
 
 	return 0;
 }
-- 
1.7.7.6

[net-next 2/7] e1000e: PHY initialization flow changes for 82577/8/9

[Jeff Kirsher]

From: Bruce Allan <bruce.w.allan@intel.com>

The PHY initialization flows and assorted workarounds for 82577/8/9 done
during driver load and resume from Sx should be the same yet they are not.
Combine the current flows/workarounds into a common set of functions that
are called during the different code paths.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c |  247 ++++++++++++++++-----------
 1 files changed, 146 insertions(+), 101 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 2506ee2..4c8b0fb 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -287,25 +287,126 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
 #define ew16flash(reg, val)	__ew16flash(hw, (reg), (val))
 #define ew32flash(reg, val)	__ew32flash(hw, (reg), (val))
 
-static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw)
+/**
+ *  e1000_phy_is_accessible_pchlan - Check if able to access PHY registers
+ *  @hw: pointer to the HW structure
+ *
+ *  Test access to the PHY registers by reading the PHY ID registers.  If
+ *  the PHY ID is already known (e.g. resume path) compare it with known ID,
+ *  otherwise assume the read PHY ID is correct if it is valid.
+ *
+ *  Assumes the sw/fw/hw semaphore is already acquired.
+ **/
+static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
 {
-	u32 reg;
+	u16 phy_reg;
+	u32 phy_id;
 
-	/* Set Phy Config Counter to 50msec */
-	reg = er32(FEXTNVM3);
-	reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
-	reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
-	ew32(FEXTNVM3, reg);
-
-	/* Toggle LANPHYPC Value bit */
-	reg = er32(CTRL);
-	reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
-	reg &= ~E1000_CTRL_LANPHYPC_VALUE;
-	ew32(CTRL, reg);
-	e1e_flush();
-	udelay(10);
-	reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
-	ew32(CTRL, reg);
+	hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_reg);
+	phy_id = (u32)(phy_reg << 16);
+	hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_reg);
+	phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
+
+	if (hw->phy.id) {
+		if (hw->phy.id == phy_id)
+			return true;
+	} else {
+		if ((phy_id != 0) && (phy_id != PHY_REVISION_MASK))
+			hw->phy.id = phy_id;
+		return true;
+	}
+
+	return false;
+}
+
+/**
+ *  e1000_init_phy_workarounds_pchlan - PHY initialization workarounds
+ *  @hw: pointer to the HW structure
+ *
+ *  Workarounds/flow necessary for PHY initialization during driver load
+ *  and resume paths.
+ **/
+static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
+{
+	u32 mac_reg, fwsm = er32(FWSM);
+	s32 ret_val;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val) {
+		e_dbg("Failed to initialize PHY flow\n");
+		return ret_val;
+	}
+
+	/*
+	 * The MAC-PHY interconnect may be in SMBus mode.  If the PHY is
+	 * inaccessible and resetting the PHY is not blocked, toggle the
+	 * LANPHYPC Value bit to force the interconnect to PCIe mode.
+	 */
+	switch (hw->mac.type) {
+	case e1000_pch2lan:
+		/*
+		 * Gate automatic PHY configuration by hardware on
+		 * non-managed 82579
+		 */
+		if (!(fwsm & E1000_ICH_FWSM_FW_VALID))
+			e1000_gate_hw_phy_config_ich8lan(hw, true);
+
+		if (e1000_phy_is_accessible_pchlan(hw))
+			break;
+
+		/* fall-through */
+	case e1000_pchlan:
+		if ((hw->mac.type == e1000_pchlan) &&
+		    (fwsm & E1000_ICH_FWSM_FW_VALID))
+			break;
+
+		if (hw->phy.ops.check_reset_block(hw)) {
+			e_dbg("Required LANPHYPC toggle blocked by ME\n");
+			break;
+		}
+
+		e_dbg("Toggling LANPHYPC\n");
+
+		/* Set Phy Config Counter to 50msec */
+		mac_reg = er32(FEXTNVM3);
+		mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
+		mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
+		ew32(FEXTNVM3, mac_reg);
+
+		/* Toggle LANPHYPC Value bit */
+		mac_reg = er32(CTRL);
+		mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
+		mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
+		ew32(CTRL, mac_reg);
+		e1e_flush();
+		udelay(10);
+		mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
+		ew32(CTRL, mac_reg);
+		e1e_flush();
+		msleep(50);
+		break;
+	default:
+		break;
+	}
+
+	hw->phy.ops.release(hw);
+
+	/*
+	 * Reset the PHY before any access to it.  Doing so, ensures
+	 * that the PHY is in a known good state before we read/write
+	 * PHY registers.  The generic reset is sufficient here,
+	 * because we haven't determined the PHY type yet.
+	 */
+	ret_val = e1000e_phy_hw_reset_generic(hw);
+
+	/* Ungate automatic PHY configuration on non-managed 82579 */
+	if ((hw->mac.type == e1000_pch2lan) &&
+	    !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
+		usleep_range(10000, 20000);
+		e1000_gate_hw_phy_config_ich8lan(hw, false);
+	}
+
+	return ret_val;
 }
 
 /**
@@ -335,65 +436,34 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 	phy->ops.power_down           = e1000_power_down_phy_copper_ich8lan;
 	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
-	if (!hw->phy.ops.check_reset_block(hw)) {
-		u32 fwsm = er32(FWSM);
-
-		/*
-		 * The MAC-PHY interconnect may still be in SMBus mode after
-		 * Sx->S0.  If resetting the PHY is not blocked, toggle the
-		 * LANPHYPC Value bit to force the interconnect to PCIe mode.
-		 */
-		e1000_toggle_lanphypc_value_ich8lan(hw);
-		msleep(50);
-
-		/*
-		 * Gate automatic PHY configuration by hardware on
-		 * non-managed 82579
-		 */
-		if ((hw->mac.type == e1000_pch2lan) &&
-		    !(fwsm & E1000_ICH_FWSM_FW_VALID))
-			e1000_gate_hw_phy_config_ich8lan(hw, true);
-
-		/*
-		 * Reset the PHY before any access to it.  Doing so, ensures
-		 * that the PHY is in a known good state before we read/write
-		 * PHY registers.  The generic reset is sufficient here,
-		 * because we haven't determined the PHY type yet.
-		 */
-		ret_val = e1000e_phy_hw_reset_generic(hw);
-		if (ret_val)
-			return ret_val;
+	phy->id = e1000_phy_unknown;
 
-		/* Ungate automatic PHY configuration on non-managed 82579 */
-		if ((hw->mac.type == e1000_pch2lan) &&
-		    !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
-			usleep_range(10000, 20000);
-			e1000_gate_hw_phy_config_ich8lan(hw, false);
-		}
-	}
+	ret_val = e1000_init_phy_workarounds_pchlan(hw);
+	if (ret_val)
+		return ret_val;
 
-	phy->id = e1000_phy_unknown;
-	switch (hw->mac.type) {
-	default:
-		ret_val = e1000e_get_phy_id(hw);
-		if (ret_val)
-			return ret_val;
-		if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
+	if (phy->id == e1000_phy_unknown)
+		switch (hw->mac.type) {
+		default:
+			ret_val = e1000e_get_phy_id(hw);
+			if (ret_val)
+				return ret_val;
+			if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
+				break;
+			/* fall-through */
+		case e1000_pch2lan:
+			/*
+			 * In case the PHY needs to be in mdio slow mode,
+			 * set slow mode and try to get the PHY id again.
+			 */
+			ret_val = e1000_set_mdio_slow_mode_hv(hw);
+			if (ret_val)
+				return ret_val;
+			ret_val = e1000e_get_phy_id(hw);
+			if (ret_val)
+				return ret_val;
 			break;
-		/* fall-through */
-	case e1000_pch2lan:
-		/*
-		 * In case the PHY needs to be in mdio slow mode,
-		 * set slow mode and try to get the PHY id again.
-		 */
-		ret_val = e1000_set_mdio_slow_mode_hv(hw);
-		if (ret_val)
-			return ret_val;
-		ret_val = e1000e_get_phy_id(hw);
-		if (ret_val)
-			return ret_val;
-		break;
-	}
+		}
 	phy->type = e1000e_get_phy_type_from_id(phy->id);
 
 	switch (phy->type) {
@@ -3736,41 +3806,16 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
  **/
 void e1000_resume_workarounds_pchlan(struct e1000_hw *hw)
 {
-	u16 phy_id1, phy_id2;
 	s32 ret_val;
 
-	if ((hw->mac.type != e1000_pch2lan) ||
-	    hw->phy.ops.check_reset_block(hw))
+	if (hw->mac.type < e1000_pch2lan)
 		return;
 
-	ret_val = hw->phy.ops.acquire(hw);
+	ret_val = e1000_init_phy_workarounds_pchlan(hw);
 	if (ret_val) {
-		e_dbg("Failed to acquire PHY semaphore in resume\n");
+		e_dbg("Failed to init PHY flow ret_val=%d\n", ret_val);
 		return;
 	}
-
-	/* Test access to the PHY registers by reading the ID regs */
-	ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1);
-	if (ret_val)
-		goto release;
-	ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2);
-	if (ret_val)
-		goto release;
-
-	if (hw->phy.id == ((u32)(phy_id1 << 16) |
-			   (u32)(phy_id2 & PHY_REVISION_MASK)))
-		goto release;
-
-	e1000_toggle_lanphypc_value_ich8lan(hw);
-
-	hw->phy.ops.release(hw);
-	msleep(50);
-	e1000_phy_hw_reset(hw);
-	msleep(50);
-	return;
-
-release:
-	hw->phy.ops.release(hw);
 }
 
 /**
-- 
1.7.7.6

[net-next 3/7] e1000e: fix .ndo_set_rx_mode for 82579

[Jeff Kirsher]

From: Bruce Allan <bruce.w.allan@intel.com>

Secondary unicast and multicast addresses are added to the Receive
Address registers (RAR) for most parts supported by the driver.  For
82579, there is only one actual RAR and a number of Shared Receive Address
registers (SHRAR) that are shared among the driver and f/w which can be
reserved and write-protected by the f/w.  On this device, use the SHRARs
that are not taken by f/w for the additional addresses.

Add a MAC ops function pointer infrastructure (similar to other MAC
operations in the driver) for setting RARs, introduce a new rar_set
function for 82579 and convert the existing code that sets RARs on other
devices to a generic rar_set function.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/80003es2lan.c |    1 +
 drivers/net/ethernet/intel/e1000e/82571.c       |    4 +-
 drivers/net/ethernet/intel/e1000e/e1000.h       |    2 +-
 drivers/net/ethernet/intel/e1000e/hw.h          |    5 ++
 drivers/net/ethernet/intel/e1000e/ich8lan.c     |   72 ++++++++++++++++++++++-
 drivers/net/ethernet/intel/e1000e/mac.c         |   10 ++--
 drivers/net/ethernet/intel/e1000e/netdev.c      |   12 ++--
 7 files changed, 92 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index a212846..66f9877 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -1439,6 +1439,7 @@ static const struct e1000_mac_operations es2_mac_ops = {
 	/* setup_physical_interface dependent on media type */
 	.setup_led		= e1000e_setup_led_generic,
 	.config_collision_dist	= e1000e_config_collision_dist_generic,
+	.rar_set		= e1000e_rar_set_generic,
 };
 
 static const struct e1000_phy_operations es2_phy_ops = {
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index d0ea316..7b02e87 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -1762,7 +1762,8 @@ void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
 		 * incoming packets directed to this port are dropped.
 		 * Eventually the LAA will be in RAR[0] and RAR[14].
 		 */
-		e1000e_rar_set(hw, hw->mac.addr, hw->mac.rar_entry_count - 1);
+		hw->mac.ops.rar_set(hw, hw->mac.addr,
+				    hw->mac.rar_entry_count - 1);
 }
 
 /**
@@ -1926,6 +1927,7 @@ static const struct e1000_mac_operations e82571_mac_ops = {
 	.setup_led		= e1000e_setup_led_generic,
 	.config_collision_dist	= e1000e_config_collision_dist_generic,
 	.read_mac_addr		= e1000_read_mac_addr_82571,
+	.rar_set		= e1000e_rar_set_generic,
 };
 
 static const struct e1000_phy_operations e82_phy_ops_igp = {
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 1dc2067..1da9bfa 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -576,7 +576,7 @@ extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
 extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
 					       u8 *mc_addr_list,
 					       u32 mc_addr_count);
-extern void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
+extern void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index);
 extern s32 e1000e_set_fc_watermarks(struct e1000_hw *hw);
 extern void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
 extern s32 e1000e_get_hw_semaphore(struct e1000_hw *hw);
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index 3a5acb5..00a0ebb 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -200,6 +200,10 @@ enum e1e_registers {
 #define E1000_RA        (E1000_RAL(0))
 	E1000_RAH_BASE = 0x05404, /* Receive Address High - RW */
 #define E1000_RAH(_n)   (E1000_RAH_BASE + ((_n) * 8))
+	E1000_SHRAL_BASE = 0x05438, /* Shared Receive Address Low - RW */
+#define E1000_SHRAL(_n)   (E1000_SHRAL_BASE + ((_n) * 8))
+	E1000_SHRAH_BASE = 0x0543C, /* Shared Receive Address High - RW */
+#define E1000_SHRAH(_n)   (E1000_SHRAH_BASE + ((_n) * 8))
 	E1000_VFTA     = 0x05600, /* VLAN Filter Table Array - RW Array */
 	E1000_WUC      = 0x05800, /* Wakeup Control - RW */
 	E1000_WUFC     = 0x05808, /* Wakeup Filter Control - RW */
@@ -782,6 +786,7 @@ struct e1000_mac_operations {
 	s32  (*setup_led)(struct e1000_hw *);
 	void (*write_vfta)(struct e1000_hw *, u32, u32);
 	void (*config_collision_dist)(struct e1000_hw *);
+	void (*rar_set)(struct e1000_hw *, u8 *, u32);
 	s32  (*read_mac_addr)(struct e1000_hw *);
 };
 
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 4c8b0fb..ca34ebf 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -115,6 +115,7 @@
 #define PCIE_ICH8_SNOOP_ALL		PCIE_NO_SNOOP_ALL
 
 #define E1000_ICH_RAR_ENTRIES		7
+#define E1000_PCH2_RAR_ENTRIES		5 /* RAR[0], SHRA[0-3] */
 
 #define PHY_PAGE_SHIFT 5
 #define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
@@ -259,6 +260,7 @@ static s32  e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
 static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
 static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
 static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
+static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index);
 static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
 static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
 
@@ -672,8 +674,11 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
 		mac->ops.led_on = e1000_led_on_ich8lan;
 		mac->ops.led_off = e1000_led_off_ich8lan;
 		break;
-	case e1000_pchlan:
 	case e1000_pch2lan:
+		mac->rar_entry_count = E1000_PCH2_RAR_ENTRIES;
+		mac->ops.rar_set = e1000_rar_set_pch2lan;
+		/* fall-through */
+	case e1000_pchlan:
 		/* check management mode */
 		mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
 		/* ID LED init */
@@ -1048,6 +1053,70 @@ static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_rar_set_pch2lan - Set receive address register
+ *  @hw: pointer to the HW structure
+ *  @addr: pointer to the receive address
+ *  @index: receive address array register
+ *
+ *  Sets the receive address array register at index to the address passed
+ *  in by addr.  For 82579, RAR[0] is the base address register that is to
+ *  contain the MAC address but RAR[1-6] are reserved for manageability (ME).
+ *  Use SHRA[0-3] in place of those reserved for ME.
+ **/
+static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+	u32 rar_low, rar_high;
+
+	/*
+	 * HW expects these in little endian so we reverse the byte order
+	 * from network order (big endian) to little endian
+	 */
+	rar_low = ((u32)addr[0] |
+		   ((u32)addr[1] << 8) |
+		   ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+
+	rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
+
+	/* If MAC address zero, no need to set the AV bit */
+	if (rar_low || rar_high)
+		rar_high |= E1000_RAH_AV;
+
+	if (index == 0) {
+		ew32(RAL(index), rar_low);
+		e1e_flush();
+		ew32(RAH(index), rar_high);
+		e1e_flush();
+		return;
+	}
+
+	if (index < hw->mac.rar_entry_count) {
+		s32 ret_val;
+
+		ret_val = e1000_acquire_swflag_ich8lan(hw);
+		if (ret_val)
+			goto out;
+
+		ew32(SHRAL(index - 1), rar_low);
+		e1e_flush();
+		ew32(SHRAH(index - 1), rar_high);
+		e1e_flush();
+
+		e1000_release_swflag_ich8lan(hw);
+
+		/* verify the register updates */
+		if ((er32(SHRAL(index - 1)) == rar_low) &&
+		    (er32(SHRAH(index - 1)) == rar_high))
+			return;
+
+		e_dbg("SHRA[%d] might be locked by ME - FWSM=0x%8.8x\n",
+		      (index - 1), er32(FWSM));
+	}
+
+out:
+	e_dbg("Failed to write receive address at index %d\n", index);
+}
+
+/**
  *  e1000_check_reset_block_ich8lan - Check if PHY reset is blocked
  *  @hw: pointer to the HW structure
  *
@@ -4100,6 +4169,7 @@ static const struct e1000_mac_operations ich8_mac_ops = {
 	.setup_physical_interface= e1000_setup_copper_link_ich8lan,
 	/* id_led_init dependent on mac type */
 	.config_collision_dist	= e1000e_config_collision_dist_generic,
+	.rar_set		= e1000e_rar_set_generic,
 };
 
 static const struct e1000_phy_operations ich8_phy_ops = {
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index d832749..026e8b3 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -143,12 +143,12 @@ void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
 	/* Setup the receive address */
 	e_dbg("Programming MAC Address into RAR[0]\n");
 
-	e1000e_rar_set(hw, hw->mac.addr, 0);
+	hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
 
 	/* Zero out the other (rar_entry_count - 1) receive addresses */
 	e_dbg("Clearing RAR[1-%u]\n", rar_count - 1);
 	for (i = 1; i < rar_count; i++)
-		e1000e_rar_set(hw, mac_addr, i);
+		hw->mac.ops.rar_set(hw, mac_addr, i);
 }
 
 /**
@@ -215,13 +215,13 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
 	 * same as the normal permanent MAC address stored by the HW into the
 	 * RAR. Do this by mapping this address into RAR0.
 	 */
-	e1000e_rar_set(hw, alt_mac_addr, 0);
+	hw->mac.ops.rar_set(hw, alt_mac_addr, 0);
 
 	return 0;
 }
 
 /**
- *  e1000e_rar_set - Set receive address register
+ *  e1000e_rar_set_generic - Set receive address register
  *  @hw: pointer to the HW structure
  *  @addr: pointer to the receive address
  *  @index: receive address array register
@@ -229,7 +229,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
  *  Sets the receive address array register at index to the address passed
  *  in by addr.
  **/
-void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index)
 {
 	u32 rar_low, rar_high;
 
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 140fee1..c0e211b 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3209,7 +3209,7 @@ static int e1000e_write_uc_addr_list(struct net_device *netdev)
 		netdev_for_each_uc_addr(ha, netdev) {
 			if (!rar_entries)
 				break;
-			e1000e_rar_set(hw, ha->addr, rar_entries--);
+			hw->mac.ops.rar_set(hw, ha->addr, rar_entries--);
 			count++;
 		}
 	}
@@ -4018,6 +4018,7 @@ static int e1000_close(struct net_device *netdev)
 static int e1000_set_mac(struct net_device *netdev, void *p)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	struct sockaddr *addr = p;
 
 	if (!is_valid_ether_addr(addr->sa_data))
@@ -4026,7 +4027,7 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
 	memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
 
-	e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
+	hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
 
 	if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
 		/* activate the work around */
@@ -4040,9 +4041,8 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
 		 * are dropped. Eventually the LAA will be in RAR[0] and
 		 * RAR[14]
 		 */
-		e1000e_rar_set(&adapter->hw,
-			      adapter->hw.mac.addr,
-			      adapter->hw.mac.rar_entry_count - 1);
+		hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr,
+				    adapter->hw.mac.rar_entry_count - 1);
 	}
 
 	return 0;
@@ -4621,7 +4621,7 @@ link_up:
 	 * reset from the other port. Set the appropriate LAA in RAR[0]
 	 */
 	if (e1000e_get_laa_state_82571(hw))
-		e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
+		hw->mac.ops.rar_set(hw, adapter->hw.mac.addr, 0);
 
 	if (adapter->flags2 & FLAG2_CHECK_PHY_HANG)
 		e1000e_check_82574_phy_workaround(adapter);
-- 
1.7.7.6

[net-next 4/7] ixgbe: add support functions to access thermal data

[Jeff Kirsher]

From: Don Skidmore <donald.c.skidmore@intel.com>

Some 82599 adapters contain thermal data that we can get to via
an i2c interface.  These functions provide support to get at that
data.  A following patch will export this data.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c |  171 +++++++++++++++++++++++
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.h |   13 ++
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h   |   40 ++++++
 3 files changed, 224 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index e598881..6c6c66e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -3604,3 +3604,174 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw)
 	IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
 	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
 }
+
+static const u8 ixgbe_emc_temp_data[4] = {
+	IXGBE_EMC_INTERNAL_DATA,
+	IXGBE_EMC_DIODE1_DATA,
+	IXGBE_EMC_DIODE2_DATA,
+	IXGBE_EMC_DIODE3_DATA
+};
+static const u8 ixgbe_emc_therm_limit[4] = {
+	IXGBE_EMC_INTERNAL_THERM_LIMIT,
+	IXGBE_EMC_DIODE1_THERM_LIMIT,
+	IXGBE_EMC_DIODE2_THERM_LIMIT,
+	IXGBE_EMC_DIODE3_THERM_LIMIT
+};
+
+/**
+ *  ixgbe_get_ets_data - Extracts the ETS bit data
+ *  @hw: pointer to hardware structure
+ *  @ets_cfg: extected ETS data
+ *  @ets_offset: offset of ETS data
+ *
+ *  Returns error code.
+ **/
+static s32 ixgbe_get_ets_data(struct ixgbe_hw *hw, u16 *ets_cfg,
+			      u16 *ets_offset)
+{
+	s32 status = 0;
+
+	status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, ets_offset);
+	if (status)
+		goto out;
+
+	if ((*ets_offset == 0x0000) || (*ets_offset == 0xFFFF)) {
+		status = IXGBE_NOT_IMPLEMENTED;
+		goto out;
+	}
+
+	status = hw->eeprom.ops.read(hw, *ets_offset, ets_cfg);
+	if (status)
+		goto out;
+
+	if ((*ets_cfg & IXGBE_ETS_TYPE_MASK) != IXGBE_ETS_TYPE_EMC_SHIFTED) {
+		status = IXGBE_NOT_IMPLEMENTED;
+		goto out;
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the thermal sensor data structure
+ **/
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+	u16 ets_offset;
+	u16 ets_cfg;
+	u16 ets_sensor;
+	u8  num_sensors;
+	u8  i;
+	struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	/* Only support thermal sensors attached to 82599 physical port 0 */
+	if ((hw->mac.type != ixgbe_mac_82599EB) ||
+	     (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
+		status = IXGBE_NOT_IMPLEMENTED;
+		goto out;
+	}
+
+	status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset);
+	if (status)
+		goto out;
+
+	num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+	if (num_sensors > IXGBE_MAX_SENSORS)
+		num_sensors = IXGBE_MAX_SENSORS;
+
+	for (i = 0; i < num_sensors; i++) {
+		u8  sensor_index;
+		u8  sensor_location;
+
+		status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i),
+					     &ets_sensor);
+		if (status)
+			goto out;
+
+		sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+				IXGBE_ETS_DATA_INDEX_SHIFT);
+		sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+				   IXGBE_ETS_DATA_LOC_SHIFT);
+
+		if (sensor_location != 0) {
+			status = hw->phy.ops.read_i2c_byte(hw,
+					ixgbe_emc_temp_data[sensor_index],
+					IXGBE_I2C_THERMAL_SENSOR_ADDR,
+					&data->sensor[i].temp);
+			if (status)
+				goto out;
+		}
+	}
+out:
+	return status;
+}
+
+/**
+ * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Inits the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+	u16 ets_offset;
+	u16 ets_cfg;
+	u16 ets_sensor;
+	u8  low_thresh_delta;
+	u8  num_sensors;
+	u8  therm_limit;
+	u8  i;
+	struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data));
+
+	/* Only support thermal sensors attached to 82599 physical port 0 */
+	if ((hw->mac.type != ixgbe_mac_82599EB) ||
+	    (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
+		status = IXGBE_NOT_IMPLEMENTED;
+		goto out;
+	}
+
+	status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset);
+	if (status)
+		goto out;
+
+	low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >>
+			     IXGBE_ETS_LTHRES_DELTA_SHIFT);
+	num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+	if (num_sensors > IXGBE_MAX_SENSORS)
+		num_sensors = IXGBE_MAX_SENSORS;
+
+	for (i = 0; i < num_sensors; i++) {
+		u8  sensor_index;
+		u8  sensor_location;
+
+		hw->eeprom.ops.read(hw, (ets_offset + 1 + i), &ets_sensor);
+		sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+				IXGBE_ETS_DATA_INDEX_SHIFT);
+		sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+				   IXGBE_ETS_DATA_LOC_SHIFT);
+		therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK;
+
+		hw->phy.ops.write_i2c_byte(hw,
+			ixgbe_emc_therm_limit[sensor_index],
+			IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit);
+
+		if (sensor_location == 0)
+			continue;
+
+		data->sensor[i].location = sensor_location;
+		data->sensor[i].caution_thresh = therm_limit;
+		data->sensor[i].max_op_thresh = therm_limit - low_thresh_delta;
+	}
+out:
+	return status;
+}
+
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index d6d3432..f992777 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -107,6 +107,19 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw);
 void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb,
 			     u32 headroom, int strategy);
 
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR	0xF8
+#define IXGBE_EMC_INTERNAL_DATA		0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT	0x20
+#define IXGBE_EMC_DIODE1_DATA		0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT	0x19
+#define IXGBE_EMC_DIODE2_DATA		0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT	0x1A
+#define IXGBE_EMC_DIODE3_DATA		0x2A
+#define IXGBE_EMC_DIODE3_THERM_LIMIT	0x30
+
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw);
+
 #define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
 
 #ifndef writeq
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 4acd9e6..d82e25c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -112,6 +112,27 @@
 #define IXGBE_I2C_DATA_OUT  0x00000008
 #define IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT	500
 
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR	0xF8
+#define IXGBE_EMC_INTERNAL_DATA		0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT	0x20
+#define IXGBE_EMC_DIODE1_DATA		0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT	0x19
+#define IXGBE_EMC_DIODE2_DATA		0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT	0x1A
+
+#define IXGBE_MAX_SENSORS		3
+
+struct ixgbe_thermal_diode_data {
+	u8 location;
+	u8 temp;
+	u8 caution_thresh;
+	u8 max_op_thresh;
+};
+
+struct ixgbe_thermal_sensor_data {
+	struct ixgbe_thermal_diode_data sensor[IXGBE_MAX_SENSORS];
+};
+
 /* Interrupt Registers */
 #define IXGBE_EICR      0x00800
 #define IXGBE_EICS      0x00808
@@ -1678,6 +1699,22 @@ enum {
 #define IXGBE_PBANUM0_PTR       0x15
 #define IXGBE_PBANUM1_PTR       0x16
 #define IXGBE_FREE_SPACE_PTR    0X3E
+
+/* External Thermal Sensor Config */
+#define IXGBE_ETS_CFG                   0x26
+#define IXGBE_ETS_LTHRES_DELTA_MASK     0x07C0
+#define IXGBE_ETS_LTHRES_DELTA_SHIFT    6
+#define IXGBE_ETS_TYPE_MASK             0x0038
+#define IXGBE_ETS_TYPE_SHIFT            3
+#define IXGBE_ETS_TYPE_EMC              0x000
+#define IXGBE_ETS_TYPE_EMC_SHIFTED      0x000
+#define IXGBE_ETS_NUM_SENSORS_MASK      0x0007
+#define IXGBE_ETS_DATA_LOC_MASK         0x3C00
+#define IXGBE_ETS_DATA_LOC_SHIFT        10
+#define IXGBE_ETS_DATA_INDEX_MASK       0x0300
+#define IXGBE_ETS_DATA_INDEX_SHIFT      8
+#define IXGBE_ETS_DATA_HTHRESH_MASK     0x00FF
+
 #define IXGBE_SAN_MAC_ADDR_PTR  0x28
 #define IXGBE_DEVICE_CAPS       0x2C
 #define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11
@@ -2775,6 +2812,8 @@ struct ixgbe_mac_operations {
 
 	/* Manageability interface */
 	s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
+	s32 (*get_thermal_sensor_data)(struct ixgbe_hw *);
+	s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw);
 };
 
 struct ixgbe_phy_operations {
@@ -2832,6 +2871,7 @@ struct ixgbe_mac_info {
 	bool                            orig_link_settings_stored;
 	bool                            autotry_restart;
 	u8                              flags;
+	struct ixgbe_thermal_sensor_data  thermal_sensor_data;
 };
 
 struct ixgbe_phy_info {
-- 
1.7.7.6

[net-next 5/7] ixgbe: add hwmon interface to export thermal data

[Jeff Kirsher]

From: Don Skidmore <donald.c.skidmore@intel.com>

Some of our adapters have thermal data available, this patch exports
this data via hwmon sysfs interface.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/Kconfig              |    8 +
 drivers/net/ethernet/intel/ixgbe/Makefile       |    2 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe.h        |   26 +++
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c  |    2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c  |    2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c |   10 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c   |    6 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c  |  271 +++++++++++++++++++++++
 drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c   |    2 +
 9 files changed, 322 insertions(+), 7 deletions(-)
 create mode 100644 drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c

diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 74215c0..546efe3 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -193,6 +193,14 @@ config IXGBE
 	  To compile this driver as a module, choose M here. The module
 	  will be called ixgbe.
 
+config IXGBE_HWMON
+	bool "Intel(R) 10GbE PCI Express adapters HWMON support"
+	default y
+	depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
+	---help---
+	  Say Y if you want to expose the thermal sensor data on some of
+	  our cards, via a hwmon sysfs interface.
+
 config IXGBE_DCA
 	bool "Direct Cache Access (DCA) Support"
 	default y
diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile
index 8be1d1b..0708d7e 100644
--- a/drivers/net/ethernet/intel/ixgbe/Makefile
+++ b/drivers/net/ethernet/intel/ixgbe/Makefile
@@ -34,7 +34,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o
 
 ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \
               ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \
-              ixgbe_mbx.o ixgbe_x540.o ixgbe_lib.o
+              ixgbe_mbx.o ixgbe_x540.o ixgbe_sysfs.o ixgbe_lib.o
 
 ixgbe-$(CONFIG_IXGBE_DCB) +=  ixgbe_dcb.o ixgbe_dcb_82598.o \
                               ixgbe_dcb_82599.o ixgbe_dcb_nl.o
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 8e082f2..89cebc8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -331,6 +331,26 @@ struct ixgbe_q_vector {
 	/* for dynamic allocation of rings associated with this q_vector */
 	struct ixgbe_ring ring[0] ____cacheline_internodealigned_in_smp;
 };
+#ifdef CONFIG_IXGBE_HWMON
+
+#define IXGBE_HWMON_TYPE_LOC		0
+#define IXGBE_HWMON_TYPE_TEMP		1
+#define IXGBE_HWMON_TYPE_CAUTION	2
+#define IXGBE_HWMON_TYPE_MAX		3
+
+struct hwmon_attr {
+	struct device_attribute dev_attr;
+	struct ixgbe_hw *hw;
+	struct ixgbe_thermal_diode_data *sensor;
+	char name[12];
+};
+
+struct hwmon_buff {
+	struct device *device;
+	struct hwmon_attr *hwmon_list;
+	unsigned int n_hwmon;
+};
+#endif /* CONFIG_IXGBE_HWMON */
 
 /*
  * microsecond values for various ITR rates shifted by 2 to fit itr register
@@ -535,6 +555,10 @@ struct ixgbe_adapter {
 
 	u32 timer_event_accumulator;
 	u32 vferr_refcount;
+	struct kobject *info_kobj;
+#ifdef CONFIG_IXGBE_HWMON
+	struct hwmon_buff ixgbe_hwmon_buff;
+#endif /* CONFIG_IXGBE_HWMON */
 };
 
 struct ixgbe_fdir_filter {
@@ -635,6 +659,8 @@ extern int ixgbe_setup_tc(struct net_device *dev, u8 tc);
 #endif
 extern void ixgbe_tx_ctxtdesc(struct ixgbe_ring *, u32, u32, u32, u32);
 extern void ixgbe_do_reset(struct net_device *netdev);
+extern void ixgbe_sysfs_exit(struct ixgbe_adapter *adapter);
+extern int ixgbe_sysfs_init(struct ixgbe_adapter *adapter);
 #ifdef IXGBE_FCOE
 extern void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter);
 extern int ixgbe_fso(struct ixgbe_ring *tx_ring,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 56fd468..6175845 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -1277,6 +1277,8 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
 	.set_fw_drv_ver         = NULL,
 	.acquire_swfw_sync      = &ixgbe_acquire_swfw_sync,
 	.release_swfw_sync      = &ixgbe_release_swfw_sync,
+	.get_thermal_sensor_data = NULL,
+	.init_thermal_sensor_thresh = NULL,
 };
 
 static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 9c14685..dee64d2 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -2119,6 +2119,8 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
 	.acquire_swfw_sync      = &ixgbe_acquire_swfw_sync,
 	.release_swfw_sync      = &ixgbe_release_swfw_sync,
+	.get_thermal_sensor_data = &ixgbe_get_thermal_sensor_data_generic,
+	.init_thermal_sensor_thresh = &ixgbe_init_thermal_sensor_thresh_generic,
 
 };
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 6c6c66e..e2b0519 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -3669,9 +3669,8 @@ s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw)
 	u8  i;
 	struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
 
-	/* Only support thermal sensors attached to 82599 physical port 0 */
-	if ((hw->mac.type != ixgbe_mac_82599EB) ||
-	     (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
+	/* Only support thermal sensors attached to physical port 0 */
+	if ((IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
 		status = IXGBE_NOT_IMPLEMENTED;
 		goto out;
 	}
@@ -3732,9 +3731,8 @@ s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
 
 	memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data));
 
-	/* Only support thermal sensors attached to 82599 physical port 0 */
-	if ((hw->mac.type != ixgbe_mac_82599EB) ||
-	    (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
+	/* Only support thermal sensors attached to physical port 0 */
+	if ((IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
 		status = IXGBE_NOT_IMPLEMENTED;
 		goto out;
 	}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index aa29edb..e8897cc 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7219,6 +7219,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
 	e_dev_info("%s\n", ixgbe_default_device_descr);
 	cards_found++;
+
+	if (ixgbe_sysfs_init(adapter))
+		e_err(probe, "failed to allocate sysfs resources\n");
+
 	return 0;
 
 err_register:
@@ -7265,6 +7269,8 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 	}
 
 #endif
+	ixgbe_sysfs_exit(adapter);
+
 #ifdef IXGBE_FCOE
 	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
 		ixgbe_cleanup_fcoe(adapter);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c
new file mode 100644
index 0000000..aa41fb7
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c
@@ -0,0 +1,271 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2012 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe.h"
+#include "ixgbe_common.h"
+#include "ixgbe_type.h"
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/hwmon.h>
+
+/*
+ * This file provides a sysfs interface to export information from the
+ * driver.  The information presented is READ-ONLY.
+ */
+#ifdef CONFIG_IXGBE_HWMON
+
+/* hwmon callback functions */
+static ssize_t ixgbe_hwmon_show_location(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct hwmon_attr *ixgbe_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	return sprintf(buf, "loc%u\n",
+		       ixgbe_attr->sensor->location);
+}
+
+static ssize_t ixgbe_hwmon_show_temp(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct hwmon_attr *ixgbe_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	unsigned int value;
+
+	/* reset the temp field */
+	ixgbe_attr->hw->mac.ops.get_thermal_sensor_data(ixgbe_attr->hw);
+
+	value = ixgbe_attr->sensor->temp;
+
+	/* display millidegree */
+	value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t ixgbe_hwmon_show_cautionthresh(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct hwmon_attr *ixgbe_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	unsigned int value = ixgbe_attr->sensor->caution_thresh;
+
+	/* display millidegree */
+	value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t ixgbe_hwmon_show_maxopthresh(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct hwmon_attr *ixgbe_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	unsigned int value = ixgbe_attr->sensor->max_op_thresh;
+
+	/* display millidegree */
+	value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+/*
+ * ixgbe_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file.
+ * @ adapter: pointer to the adapter structure
+ * @ offset: offset in the eeprom sensor data table
+ * @ type: type of sensor data to display
+ *
+ * For each file we want in hwmon's sysfs interface we need a device_attribute
+ * This is included in our hwmon_attr struct that contains the references to
+ * the data structures we need to get the data to display.
+ */
+static int ixgbe_add_hwmon_attr(struct ixgbe_adapter *adapter,
+				unsigned int offset, int type) {
+	int rc;
+	unsigned int n_attr;
+	struct hwmon_attr *ixgbe_attr;
+
+	n_attr = adapter->ixgbe_hwmon_buff.n_hwmon;
+	ixgbe_attr = &adapter->ixgbe_hwmon_buff.hwmon_list[n_attr];
+
+	switch (type) {
+	case IXGBE_HWMON_TYPE_LOC:
+		ixgbe_attr->dev_attr.show = ixgbe_hwmon_show_location;
+		snprintf(ixgbe_attr->name, sizeof(ixgbe_attr->name),
+			 "temp%u_label", offset);
+		break;
+	case IXGBE_HWMON_TYPE_TEMP:
+		ixgbe_attr->dev_attr.show = ixgbe_hwmon_show_temp;
+		snprintf(ixgbe_attr->name, sizeof(ixgbe_attr->name),
+			 "temp%u_input", offset);
+		break;
+	case IXGBE_HWMON_TYPE_CAUTION:
+		ixgbe_attr->dev_attr.show = ixgbe_hwmon_show_cautionthresh;
+		snprintf(ixgbe_attr->name, sizeof(ixgbe_attr->name),
+			 "temp%u_max", offset);
+		break;
+	case IXGBE_HWMON_TYPE_MAX:
+		ixgbe_attr->dev_attr.show = ixgbe_hwmon_show_maxopthresh;
+		snprintf(ixgbe_attr->name, sizeof(ixgbe_attr->name),
+			 "temp%u_crit", offset);
+		break;
+	default:
+		rc = -EPERM;
+		return rc;
+	}
+
+	/* These always the same regardless of type */
+	ixgbe_attr->sensor =
+		&adapter->hw.mac.thermal_sensor_data.sensor[offset];
+	ixgbe_attr->hw = &adapter->hw;
+	ixgbe_attr->dev_attr.store = NULL;
+	ixgbe_attr->dev_attr.attr.mode = S_IRUGO;
+	ixgbe_attr->dev_attr.attr.name = ixgbe_attr->name;
+
+	rc = device_create_file(&adapter->pdev->dev,
+				&ixgbe_attr->dev_attr);
+
+	if (rc == 0)
+		++adapter->ixgbe_hwmon_buff.n_hwmon;
+
+	return rc;
+}
+#endif /* CONFIG_IXGBE_HWMON */
+
+static void ixgbe_sysfs_del_adapter(struct ixgbe_adapter *adapter)
+{
+#ifdef CONFIG_IXGBE_HWMON
+	int i;
+#endif /* CONFIG_IXGBE_HWMON */
+
+	if (adapter == NULL)
+		return;
+#ifdef CONFIG_IXGBE_HWMON
+
+	for (i = 0; i < adapter->ixgbe_hwmon_buff.n_hwmon; i++) {
+		device_remove_file(&adapter->pdev->dev,
+			   &adapter->ixgbe_hwmon_buff.hwmon_list[i].dev_attr);
+	}
+
+	kfree(adapter->ixgbe_hwmon_buff.hwmon_list);
+
+	if (adapter->ixgbe_hwmon_buff.device)
+		hwmon_device_unregister(adapter->ixgbe_hwmon_buff.device);
+#endif /* CONFIG_IXGBE_HWMON */
+
+	if (adapter->info_kobj != NULL)
+		kobject_put(adapter->info_kobj);
+}
+
+/* called from ixgbe_main.c */
+void ixgbe_sysfs_exit(struct ixgbe_adapter *adapter)
+{
+	ixgbe_sysfs_del_adapter(adapter);
+}
+
+/* called from ixgbe_main.c */
+int ixgbe_sysfs_init(struct ixgbe_adapter *adapter)
+{
+#ifdef CONFIG_IXGBE_HWMON
+	struct hwmon_buff *ixgbe_hwmon = &adapter->ixgbe_hwmon_buff;
+	unsigned int i;
+	int n_attrs;
+#endif /* CONFIG_IXGBE_HWMON */
+	struct net_device *netdev = adapter->netdev;
+	int rc = 0;
+
+	/* create info kobj and attribute listings in kobj */
+	adapter->info_kobj = kobject_create_and_add("info", &netdev->dev.kobj);
+	if (adapter->info_kobj == NULL) {
+		rc = -ENOMEM;
+		goto err;
+	}
+
+#ifdef CONFIG_IXGBE_HWMON
+	/* If this method isn't defined we don't support thermals */
+	if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL) {
+		rc = -EPERM;
+		goto err;
+	}
+
+	/* Don't create thermal hwmon interface if no sensors present */
+	rc = adapter->hw.mac.ops.init_thermal_sensor_thresh(&adapter->hw);
+	if (rc)
+		goto err;
+
+	/*
+	 * Allocation space for max attributs
+	 * max num sensors * values (loc, temp, max, caution)
+	 */
+	n_attrs = IXGBE_MAX_SENSORS * 4;
+	ixgbe_hwmon->hwmon_list = kcalloc(n_attrs, sizeof(struct hwmon_attr),
+					  GFP_KERNEL);
+	if (!ixgbe_hwmon->hwmon_list) {
+		rc = -ENOMEM;
+		goto err;
+	}
+
+	ixgbe_hwmon->device = hwmon_device_register(&adapter->pdev->dev);
+	if (IS_ERR(ixgbe_hwmon->device)) {
+		rc = PTR_ERR(ixgbe_hwmon->device);
+		goto err;
+	}
+
+	for (i = 0; i < IXGBE_MAX_SENSORS; i++) {
+		/*
+		 * Only create hwmon sysfs entries for sensors that have
+		 * meaningful data for.
+		 */
+		if (adapter->hw.mac.thermal_sensor_data.sensor[i].location == 0)
+			continue;
+
+		/* Bail if any hwmon attr struct fails to initialize */
+		rc = ixgbe_add_hwmon_attr(adapter, i, IXGBE_HWMON_TYPE_CAUTION);
+		rc |= ixgbe_add_hwmon_attr(adapter, i, IXGBE_HWMON_TYPE_LOC);
+		rc |= ixgbe_add_hwmon_attr(adapter, i, IXGBE_HWMON_TYPE_TEMP);
+		rc |= ixgbe_add_hwmon_attr(adapter, i, IXGBE_HWMON_TYPE_MAX);
+		if (rc)
+			goto err;
+	}
+#endif /* CONFIG_IXGBE_HWMON */
+
+	goto exit;
+
+err:
+	ixgbe_sysfs_del_adapter(adapter);
+exit:
+	return rc;
+}
+
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index 97a9914..f90ec07 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -849,6 +849,8 @@ static struct ixgbe_mac_operations mac_ops_X540 = {
 	.release_swfw_sync      = &ixgbe_release_swfw_sync_X540,
 	.disable_rx_buff	= &ixgbe_disable_rx_buff_generic,
 	.enable_rx_buff		= &ixgbe_enable_rx_buff_generic,
+	.get_thermal_sensor_data = NULL,
+	.init_thermal_sensor_thresh = NULL,
 };
 
 static struct ixgbe_eeprom_operations eeprom_ops_X540 = {
-- 
1.7.7.6

[net-next 6/7] ixgbe: Deny MACVLAN requests from VFs with admin set MAC

[Jeff Kirsher]

From: Greg Rose <gregory.v.rose@intel.com>

If the host VMM administrator has set the virtual function device's
MAC address then also deny VF requests for MACVLAN filters.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Garrett, Robert <robertx.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index 88a58cb..3985637 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -635,6 +635,12 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 		}
 		break;
 	case IXGBE_VF_SET_MACVLAN:
+		if (adapter->vfinfo[vf].pf_set_mac) {
+			e_warn(drv, "VF %d requested MACVLAN filter but is "
+				    "administratively denied\n", vf);
+			retval = -1;
+			break;
+		}
 		index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >>
 			IXGBE_VT_MSGINFO_SHIFT;
 		/*
-- 
1.7.7.6

[net-next 7/7] ixgbe: Reset max_vfs to zero when user request is out of range

[Jeff Kirsher]

From: Greg Rose <gregory.v.rose@intel.com>

If the user request for the number of VFs in the max_vfs parameter is
out of range then reset the value to the default value of zero.  This
makes the behavior of the ixgbe driver the same as for the igb driver.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Robert Garrett <robertx.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |    7 ++++---
 1 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index e8897cc..688c7bb 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -133,7 +133,7 @@ static struct notifier_block dca_notifier = {
 static unsigned int max_vfs;
 module_param(max_vfs, uint, 0);
 MODULE_PARM_DESC(max_vfs,
-		 "Maximum number of virtual functions to allocate per physical function");
+		 "Maximum number of virtual functions to allocate per physical function - default is zero and maximum value is 63");
 #endif /* CONFIG_PCI_IOV */
 
 static unsigned int allow_unsupported_sfp;
@@ -6778,9 +6778,10 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
 	/* The 82599 supports up to 64 VFs per physical function
 	 * but this implementation limits allocation to 63 so that
 	 * basic networking resources are still available to the
-	 * physical function
+	 * physical function.  If the user requests greater thn
+	 * 63 VFs then it is an error - reset to default of zero.
 	 */
-	adapter->num_vfs = (max_vfs > 63) ? 63 : max_vfs;
+	adapter->num_vfs = (max_vfs > 63) ? 0 : max_vfs;
 	ixgbe_enable_sriov(adapter, ii);
 #endif /* CONFIG_PCI_IOV */
 }
-- 
1.7.7.6

Re: [net-next v2 0/7][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Wed,  2 May 2012 02:13:38 -0700

> This series of patches contains updates for e1000e and ixgbe.
> Patch 4 & 5 integrate the hwmon interface for ixgbe as Ben Hutchings
> has done for other drivers.
> 
> v2: dropped the ixgbe patch which added the sysfs interface
> 
> The following are changes since commit e4ae004b84b315dd4b762e474f97403eac70f76a:
>   netem: add ECN capability
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks Jeff.

[net-next v2 0/7][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to e1000, igb and ixgbe.

Emil provides his version 2 fix for the detection of SFP+ capable interfaces.
In cases where the driver is loaded while there are no SFP+ modules in cage,
the interface was not being detected as SFP capable.  Resolve the issue by
identifying interfaces with no PHY type set as SFP capable which allows the
driver to detect the SFP module when the interface is brought up.  In this
version 2 of the patch, the 82599 specific check was removed since we only
have 82598 devices that are SFP capable.

Jacob removes the including of the export header in the ixgbe PTP core, since
it is not needed.  Renames igb_ptp_enable() to igb_ptp_feature_enable() to
better reflect the actual functions purpose.

Todd fixes the ethtool loopback test for i354 backplane devices since we
do not know what PHY is to be used for the devices, use MAC loopback for
ethtool tests.  Todd also sets the packet buffer size register defaults for
i210 devices.

Yongjian Xu removes the check for skb->len being negative or zero since there
is never a case where it would be zero or negative for e1000.

Manuel Schölling updates e1000 to use the time_after() helper function.

v2: Fix indentation on wrapped line in patch 3 of the series based on
    feedback from David Miller

The following are changes since commit 92ff71b8fe9cd9c673615fc6f3870af7376d7c84:
  net: remove some unless free on failure in alloc_netdev_mqs()
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Emil Tantilov (1):
  ixgbe: fix detection of SFP+ capable interfaces

Jacob Keller (2):
  ixgbe: remove linux/export.h header from ixgbe_ptp.c
  igb: rename igb_ptp_enable to igb_ptp_feature_enable

Manuel Schölling (1):
  e1000: Use time_after() for time comparison

Todd Fujinaka (2):
  igb: use mac loopback for i354 backplane
  igb: add defaults for i210 TX/RX PBSIZE

Yongjian Xu (1):
  e1000: remove the check: skb->len<=0

 drivers/net/ethernet/intel/e1000/e1000_ethtool.c |  3 ++-
 drivers/net/ethernet/intel/e1000/e1000_main.c    |  5 -----
 drivers/net/ethernet/intel/igb/e1000_defines.h   |  3 +++
 drivers/net/ethernet/intel/igb/e1000_regs.h      |  4 ++++
 drivers/net/ethernet/intel/igb/igb_ethtool.c     |  4 ++--
 drivers/net/ethernet/intel/igb/igb_main.c        |  6 ++++++
 drivers/net/ethernet/intel/igb/igb_ptp.c         | 10 +++++-----
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c |  7 -------
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c    |  2 ++
 drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c     |  1 -
 10 files changed, 24 insertions(+), 21 deletions(-)

-- 
1.9.3

Re: [net-next v2 0/7][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Wed,  4 Jun 2014 00:04:53 -0700

> This series contains updates to e1000, igb and ixgbe.
 ...
> The following are changes since commit 92ff71b8fe9cd9c673615fc6f3870af7376d7c84:
>   net: remove some unless free on failure in alloc_netdev_mqs()
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks Jeff.