netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Basil Gor <basil.gor@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org
Subject: Re: [PATCH v3 2/2] macvtap: restore vlan header on user read
Date: Thu, 3 May 2012 16:07:53 +0300	[thread overview]
Message-ID: <20120503130751.GB26366@redhat.com> (raw)
In-Reply-To: <m162cngitu.fsf@fess.ebiederm.org>

On Wed, Apr 25, 2012 at 10:31:25PM -0700, Eric W. Biederman wrote:
> Basil Gor <basil.gor@gmail.com> writes:
> 
> > Vlan tag is restored during buffer transmit to a network device (bridge
> > port) in bridging code in case of tun/tap driver. In case of macvtap it
> > has to be done explicitly. Otherwise vlan_tci is ignored and user always
> > gets untagged packets.
> 
> We could quibble about efficiencies but this looks good except for
> macvtap_recvmsg which isn't setting the auxdata for the vlan header.
> 
> Eric

Right. I'm guessing we need to support old userspace
so if there's auxdata, put vlan there but if not,
put the vlan in the packet like this patch does.

> > Signed-off-by: Basil Gor <basil.gor@gmail.com>
> > ---
> >  drivers/net/macvtap.c |   11 ++++++++++-
> >  1 files changed, 10 insertions(+), 1 deletions(-)
> >
> > diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
> > index 0427c65..28d2678 100644
> > --- a/drivers/net/macvtap.c
> > +++ b/drivers/net/macvtap.c
> > @@ -1,6 +1,7 @@
> >  #include <linux/etherdevice.h>
> >  #include <linux/if_macvlan.h>
> >  #include <linux/interrupt.h>
> > +#include <linux/if_vlan.h>
> >  #include <linux/nsproxy.h>
> >  #include <linux/compat.h>
> >  #include <linux/if_tun.h>
> > @@ -753,13 +754,21 @@ static ssize_t macvtap_aio_write(struct kiocb *iocb, const struct iovec *iv,
> >  
> >  /* Put packet to the user space buffer */
> >  static ssize_t macvtap_put_user(struct macvtap_queue *q,
> > -				const struct sk_buff *skb,
> > +				struct sk_buff *skb,
> >  				const struct iovec *iv, int len)
> >  {
> >  	struct macvlan_dev *vlan;
> >  	int ret;
> >  	int vnet_hdr_len = 0;
> >  
> > +	if (vlan_tx_tag_present(skb)) {
> > +		skb = __vlan_put_tag(skb, vlan_tx_tag_get(skb));
> > +		if (unlikely(!skb))
> > +			return -ENOMEM;
> > +
> > +		skb->vlan_tci = 0;
> > +	}
> > +
> >  	if (q->flags & IFF_VNET_HDR) {
> >  		struct virtio_net_hdr vnet_hdr;
> >  		vnet_hdr_len = q->vnet_hdr_sz;
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2012-05-03 13:07 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-18 18:34 [PATCH] macvlan/macvtap: Fix vlan tagging on user read Basil Gor
2012-04-18 18:54 ` Eric W. Biederman
2012-04-18 19:33   ` Basil Gor
2012-04-20 23:11     ` Basil Gor
2012-04-21  1:49       ` Eric W. Biederman
2012-04-25 17:01         ` [PATCH v3 1/2] vhost-net: fix handle_rx buffer size Basil Gor
2012-04-26  5:30           ` Eric W. Biederman
2012-05-03 12:39             ` Michael S. Tsirkin
2012-05-03 13:16           ` Michael S. Tsirkin
2012-05-03 14:43             ` Basil Gor
2012-04-25 17:01         ` [PATCH v3 2/2] macvtap: restore vlan header on user read Basil Gor
2012-04-26  5:31           ` Eric W. Biederman
2012-05-03 13:07             ` Michael S. Tsirkin [this message]
2012-05-03 13:37               ` Eric W. Biederman
2012-05-03 14:31                 ` Michael S. Tsirkin
2012-05-03 15:22                   ` Basil Gor
2012-05-03 23:11                     ` Basil Gor
2012-05-03 23:30                       ` Michael S. Tsirkin
2012-05-03 23:47                         ` Basil Gor
2012-05-04  1:06                           ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120503130751.GB26366@redhat.com \
    --to=mst@redhat.com \
    --cc=basil.gor@gmail.com \
    --cc=davem@davemloft.net \
    --cc=ebiederm@xmission.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).