From: "Michael S. Tsirkin" <mst@redhat.com>
To: Basil Gor <basil.gor@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org
Subject: Re: [PATCH v3 2/2] macvtap: restore vlan header on user read
Date: Fri, 4 May 2012 02:30:29 +0300 [thread overview]
Message-ID: <20120503233029.GA31083@redhat.com> (raw)
In-Reply-To: <20120503231152.GA8602@nanobar>
On Fri, May 04, 2012 at 03:11:52AM +0400, Basil Gor wrote:
> Below is a bit reworked version I've tested.
Will review thanks.
Can you add the signature according to the rules pls?
> ---
> drivers/net/macvtap.c | 43 ++++++++++++++++++++++++++++++++++++++-----
> 1 files changed, 38 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
> index 0427c65..cb8fd50 100644
> --- a/drivers/net/macvtap.c
> +++ b/drivers/net/macvtap.c
> @@ -1,5 +1,6 @@
> #include <linux/etherdevice.h>
> #include <linux/if_macvlan.h>
> +#include <linux/if_vlan.h>
> #include <linux/interrupt.h>
> #include <linux/nsproxy.h>
> #include <linux/compat.h>
> @@ -759,6 +760,8 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q,
> struct macvlan_dev *vlan;
> int ret;
> int vnet_hdr_len = 0;
> + int vlan_offset = 0;
> + int copied;
>
> if (q->flags & IFF_VNET_HDR) {
> struct virtio_net_hdr vnet_hdr;
> @@ -773,18 +776,48 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q,
> if (memcpy_toiovecend(iv, (void *)&vnet_hdr, 0, sizeof(vnet_hdr)))
> return -EFAULT;
> }
> + copied = vnet_hdr_len;
> +
> + if (!vlan_tx_tag_present(skb))
> + len = min_t(int, skb->len, len);
> + else {
> + int copy;
> + struct {
> + __be16 h_vlan_proto;
> + __be16 h_vlan_TCI;
> + } veth;
> + veth.h_vlan_proto = htons(ETH_P_8021Q);
> + veth.h_vlan_TCI = htons(vlan_tx_tag_get(skb));
> +
> + vlan_offset = offsetof(struct vlan_ethhdr, h_vlan_proto);
> + len = min_t(int, skb->len + VLAN_HLEN, len);
> +
> + copy = min_t(int, vlan_offset, len);
> + ret = skb_copy_datagram_const_iovec(skb, 0, iv, copied, copy);
> + len -= copy;
> + copied += copy;
> + if (ret || !len)
> + goto done;
> +
> + copy = min_t(int, sizeof(veth), len);
> + ret = memcpy_toiovecend(iv, (void *)&veth, copied, copy);
> + len -= copy;
> + copied += copy;
> + if (ret || !len)
> + goto done;
> + }
>
> - len = min_t(int, skb->len, len);
> -
> - ret = skb_copy_datagram_const_iovec(skb, 0, iv, vnet_hdr_len, len);
> + ret = skb_copy_datagram_const_iovec(skb, vlan_offset, iv, copied, len);
> + copied += len;
>
> +done:
> rcu_read_lock_bh();
> vlan = rcu_dereference_bh(q->vlan);
> if (vlan)
> - macvlan_count_rx(vlan, len, ret == 0, 0);
> + macvlan_count_rx(vlan, copied - vnet_hdr_len, ret == 0, 0);
> rcu_read_unlock_bh();
>
> - return ret ? ret : (len + vnet_hdr_len);
> + return ret ? ret : copied;
> }
>
> static ssize_t macvtap_do_read(struct macvtap_queue *q, struct kiocb *iocb,
> --
> 1.7.6.5
next prev parent reply other threads:[~2012-05-03 23:30 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-18 18:34 [PATCH] macvlan/macvtap: Fix vlan tagging on user read Basil Gor
2012-04-18 18:54 ` Eric W. Biederman
2012-04-18 19:33 ` Basil Gor
2012-04-20 23:11 ` Basil Gor
2012-04-21 1:49 ` Eric W. Biederman
2012-04-25 17:01 ` [PATCH v3 1/2] vhost-net: fix handle_rx buffer size Basil Gor
2012-04-26 5:30 ` Eric W. Biederman
2012-05-03 12:39 ` Michael S. Tsirkin
2012-05-03 13:16 ` Michael S. Tsirkin
2012-05-03 14:43 ` Basil Gor
2012-04-25 17:01 ` [PATCH v3 2/2] macvtap: restore vlan header on user read Basil Gor
2012-04-26 5:31 ` Eric W. Biederman
2012-05-03 13:07 ` Michael S. Tsirkin
2012-05-03 13:37 ` Eric W. Biederman
2012-05-03 14:31 ` Michael S. Tsirkin
2012-05-03 15:22 ` Basil Gor
2012-05-03 23:11 ` Basil Gor
2012-05-03 23:30 ` Michael S. Tsirkin [this message]
2012-05-03 23:47 ` Basil Gor
2012-05-04 1:06 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120503233029.GA31083@redhat.com \
--to=mst@redhat.com \
--cc=basil.gor@gmail.com \
--cc=davem@davemloft.net \
--cc=ebiederm@xmission.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).