From: Basil Gor <basil.gor@gmail.com>
To: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org
Subject: Re: [PATCH v3 2/2] macvtap: restore vlan header on user read
Date: Fri, 4 May 2012 03:47:33 +0400 [thread overview]
Message-ID: <20120503234732.GA26349@nanobar> (raw)
In-Reply-To: <20120503233029.GA31083@redhat.com>
On Fri, May 04, 2012 at 02:30:29AM +0300, Michael S. Tsirkin wrote:
> On Fri, May 04, 2012 at 03:11:52AM +0400, Basil Gor wrote:
> > Below is a bit reworked version I've tested.
>
> Will review thanks.
>
> Can you add the signature according to the rules pls?
Copy vlan header to user when vlan id is stored in skb->vlan_tci
Signed-off-by: Basil Gor <basil.gor@gmail.com>
---
drivers/net/macvtap.c | 43 ++++++++++++++++++++++++++++++++++++++-----
1 files changed, 38 insertions(+), 5 deletions(-)
diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
index 0427c65..cb8fd50 100644
--- a/drivers/net/macvtap.c
+++ b/drivers/net/macvtap.c
@@ -1,5 +1,6 @@
#include <linux/etherdevice.h>
#include <linux/if_macvlan.h>
+#include <linux/if_vlan.h>
#include <linux/interrupt.h>
#include <linux/nsproxy.h>
#include <linux/compat.h>
@@ -759,6 +760,8 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q,
struct macvlan_dev *vlan;
int ret;
int vnet_hdr_len = 0;
+ int vlan_offset = 0;
+ int copied;
if (q->flags & IFF_VNET_HDR) {
struct virtio_net_hdr vnet_hdr;
@@ -773,18 +776,48 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q,
if (memcpy_toiovecend(iv, (void *)&vnet_hdr, 0, sizeof(vnet_hdr)))
return -EFAULT;
}
+ copied = vnet_hdr_len;
+
+ if (!vlan_tx_tag_present(skb))
+ len = min_t(int, skb->len, len);
+ else {
+ int copy;
+ struct {
+ __be16 h_vlan_proto;
+ __be16 h_vlan_TCI;
+ } veth;
+ veth.h_vlan_proto = htons(ETH_P_8021Q);
+ veth.h_vlan_TCI = htons(vlan_tx_tag_get(skb));
+
+ vlan_offset = offsetof(struct vlan_ethhdr, h_vlan_proto);
+ len = min_t(int, skb->len + VLAN_HLEN, len);
+
+ copy = min_t(int, vlan_offset, len);
+ ret = skb_copy_datagram_const_iovec(skb, 0, iv, copied, copy);
+ len -= copy;
+ copied += copy;
+ if (ret || !len)
+ goto done;
+
+ copy = min_t(int, sizeof(veth), len);
+ ret = memcpy_toiovecend(iv, (void *)&veth, copied, copy);
+ len -= copy;
+ copied += copy;
+ if (ret || !len)
+ goto done;
+ }
- len = min_t(int, skb->len, len);
-
- ret = skb_copy_datagram_const_iovec(skb, 0, iv, vnet_hdr_len, len);
+ ret = skb_copy_datagram_const_iovec(skb, vlan_offset, iv, copied, len);
+ copied += len;
+done:
rcu_read_lock_bh();
vlan = rcu_dereference_bh(q->vlan);
if (vlan)
- macvlan_count_rx(vlan, len, ret == 0, 0);
+ macvlan_count_rx(vlan, copied - vnet_hdr_len, ret == 0, 0);
rcu_read_unlock_bh();
- return ret ? ret : (len + vnet_hdr_len);
+ return ret ? ret : copied;
}
static ssize_t macvtap_do_read(struct macvtap_queue *q, struct kiocb *iocb,
--
1.7.6.5
next prev parent reply other threads:[~2012-05-03 23:48 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-18 18:34 [PATCH] macvlan/macvtap: Fix vlan tagging on user read Basil Gor
2012-04-18 18:54 ` Eric W. Biederman
2012-04-18 19:33 ` Basil Gor
2012-04-20 23:11 ` Basil Gor
2012-04-21 1:49 ` Eric W. Biederman
2012-04-25 17:01 ` [PATCH v3 1/2] vhost-net: fix handle_rx buffer size Basil Gor
2012-04-26 5:30 ` Eric W. Biederman
2012-05-03 12:39 ` Michael S. Tsirkin
2012-05-03 13:16 ` Michael S. Tsirkin
2012-05-03 14:43 ` Basil Gor
2012-04-25 17:01 ` [PATCH v3 2/2] macvtap: restore vlan header on user read Basil Gor
2012-04-26 5:31 ` Eric W. Biederman
2012-05-03 13:07 ` Michael S. Tsirkin
2012-05-03 13:37 ` Eric W. Biederman
2012-05-03 14:31 ` Michael S. Tsirkin
2012-05-03 15:22 ` Basil Gor
2012-05-03 23:11 ` Basil Gor
2012-05-03 23:30 ` Michael S. Tsirkin
2012-05-03 23:47 ` Basil Gor [this message]
2012-05-04 1:06 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120503234732.GA26349@nanobar \
--to=basil.gor@gmail.com \
--cc=davem@davemloft.net \
--cc=ebiederm@xmission.com \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).