[PATCH RESEND 0/5] Adopt pinctrl support for a few outstanding imx drivers

[PATCH RESEND 0/5] Adopt pinctrl support for a few outstanding imx drivers

[Shawn Guo]

With patch 5b3aa5f (pinctrl: add pinctrl_provide_dummies interface for
platforms to use) applied on pinctrl tree, and patch "ARM: imx: enable
pinctrl dummy states" [1] being there, we are ready to adopt pinctrl
API for imx drivers.  So let's start from a few outstanding ones.

I would expect to ask Arnd and Olof to pull pinctrl tree into arm-soc
as a dependency and then have series [1] and this patch set go through
arm-soc tree to ease the merge process.

Resend to have subsystem lists Cc-ed.

Regards,
Shawn

[1] http://thread.gmane.org/gmane.linux.kernel.mmc/14180

Shawn Guo (5):
  tty: serial: imx: adopt pinctrl support
  net: fec: adopt pinctrl support
  can: flexcan: adopt pinctrl support
  i2c: imx: adopt pinctrl support
  spi/imx: adopt pinctrl support

 drivers/i2c/busses/i2c-imx.c         |    8 ++++++++
 drivers/net/can/flexcan.c            |    6 ++++++
 drivers/net/ethernet/freescale/fec.c |    9 +++++++++
 drivers/spi/spi-imx.c                |    8 ++++++++
 drivers/tty/serial/imx.c             |    8 ++++++++
 5 files changed, 39 insertions(+), 0 deletions(-)

-- 
1.7.5.4

[PATCH RESEND 2/5] net: fec: adopt pinctrl support

[Shawn Guo]

Cc: netdev@vger.kernel.org
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/net/ethernet/freescale/fec.c |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index a12b3f5..500c106 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -48,6 +48,7 @@
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
 #include <linux/of_net.h>
+#include <linux/pinctrl/consumer.h>
 
 #include <asm/cacheflush.h>
 
@@ -1542,6 +1543,7 @@ fec_probe(struct platform_device *pdev)
 	struct resource *r;
 	const struct of_device_id *of_id;
 	static int dev_id;
+	struct pinctrl *pinctrl;
 
 	of_id = of_match_device(fec_dt_ids, &pdev->dev);
 	if (of_id)
@@ -1609,6 +1611,12 @@ fec_probe(struct platform_device *pdev)
 		}
 	}
 
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl)) {
+		ret = PTR_ERR(pinctrl);
+		goto failed_pin;
+	}
+
 	fep->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(fep->clk)) {
 		ret = PTR_ERR(fep->clk);
@@ -1639,6 +1647,7 @@ failed_mii_init:
 failed_init:
 	clk_disable_unprepare(fep->clk);
 	clk_put(fep->clk);
+failed_pin:
 failed_clk:
 	for (i = 0; i < FEC_IRQ_NUM; i++) {
 		irq = platform_get_irq(pdev, i);
-- 
1.7.5.4

Re: [PATCH RESEND 2/5] net: fec: adopt pinctrl support

[Dong Aisheng]

On Mon, May 07, 2012 at 08:53:57AM +0800, Shawn Guo wrote:
> Cc: netdev@vger.kernel.org
> Cc: David S. Miller <davem@davemloft.net>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Acked-by: Dong Aisheng <dong.aisheng@linaro.org>

Regards
Dong Aisheng

Re: [PATCH RESEND 2/5] net: fec: adopt pinctrl support

[David Miller]

From: Shawn Guo <shawn.guo@linaro.org>
Date: Mon,  7 May 2012 08:53:57 +0800

> Cc: netdev@vger.kernel.org
> Cc: David S. Miller <davem@davemloft.net>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Acked-by: David S. Miller <davem@davemloft.net>

Re: [PATCH RESEND 0/5] Adopt pinctrl support for a few outstanding imx drivers

[Dong Aisheng]

On Mon, May 07, 2012 at 08:53:55AM +0800, Shawn Guo wrote:
> With patch 5b3aa5f (pinctrl: add pinctrl_provide_dummies interface for
> platforms to use) applied on pinctrl tree, and patch "ARM: imx: enable
> pinctrl dummy states" [1] being there, we are ready to adopt pinctrl
> API for imx drivers.  So let's start from a few outstanding ones.
> 
> I would expect to ask Arnd and Olof to pull pinctrl tree into arm-soc
> as a dependency and then have series [1] and this patch set go through
> arm-soc tree to ease the merge process.
> 
Shouldn't we add the pinctrl states in dts file at the same time
with this patch series or using another separate patch to add them
before this series to avoid breaking the exist mx6q platforms?

> Resend to have subsystem lists Cc-ed.
> 
> Regards,
> Shawn
> 
> [1] http://thread.gmane.org/gmane.linux.kernel.mmc/14180
> 
> Shawn Guo (5):
>   tty: serial: imx: adopt pinctrl support
...

>   net: fec: adopt pinctrl support
>   can: flexcan: adopt pinctrl support
This two also depends on another patch you sent.
[PATCH RESEND 1/9] ARM: mxs: enable pinctrl dummy states
http://www.spinics.net/lists/arm-kernel/msg173341.html

Maybe you can put this two in the mxs convert series to avoid breaking
mxs platforms.
[PATCH 0/9] Enable pinctrl support for mach-mxs
http://www.spinics.net/lists/arm-kernel/msg173312.html

Regards
Dong Aisheng

>   i2c: imx: adopt pinctrl support
>   spi/imx: adopt pinctrl support
> 
>  drivers/i2c/busses/i2c-imx.c         |    8 ++++++++
>  drivers/net/can/flexcan.c            |    6 ++++++
>  drivers/net/ethernet/freescale/fec.c |    9 +++++++++
>  drivers/spi/spi-imx.c                |    8 ++++++++
>  drivers/tty/serial/imx.c             |    8 ++++++++
>  5 files changed, 39 insertions(+), 0 deletions(-)
> 
> -- 
> 1.7.5.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

Re: [PATCH RESEND 0/5] Adopt pinctrl support for a few outstanding imx drivers

[Shawn Guo]

On Mon, May 07, 2012 at 02:50:02PM +0800, Dong Aisheng wrote:
> Shouldn't we add the pinctrl states in dts file at the same time
> with this patch series or using another separate patch to add them
> before this series to avoid breaking the exist mx6q platforms?
> 
Ah, I just noticed that your patch "ARM: imx: enable pinctrl dummy
states" did not cover imx6q.  I think we should do the same for imx6q,
so that we can separate dts update from the driver change.  When all
imx6q boards' dts files get updated to have pins defined for the
devices, we can then remove dummy state for imx6q.  Doing so will ease
the pinctrl migration for those imx6q boards.

Will update your patch on my branch to have dummy state enabled for
imx6q.

> >   net: fec: adopt pinctrl support
> >   can: flexcan: adopt pinctrl support
> This two also depends on another patch you sent.
> [PATCH RESEND 1/9] ARM: mxs: enable pinctrl dummy states
> http://www.spinics.net/lists/arm-kernel/msg173341.html
> 
> Maybe you can put this two in the mxs convert series to avoid breaking
> mxs platforms.
> [PATCH 0/9] Enable pinctrl support for mach-mxs
> http://www.spinics.net/lists/arm-kernel/msg173312.html
> 
Right.  I'm going to merge these two series into one since there are
device drives shared between imx and mxs.

-- 
Regards,
Shawn

Re: [PATCH RESEND 0/5] Adopt pinctrl support for a few outstanding imx drivers

[Dong Aisheng]

On Mon, May 07, 2012 at 03:34:06PM +0800, Shawn Guo wrote:
> On Mon, May 07, 2012 at 02:50:02PM +0800, Dong Aisheng wrote:
> > Shouldn't we add the pinctrl states in dts file at the same time
> > with this patch series or using another separate patch to add them
> > before this series to avoid breaking the exist mx6q platforms?
> > 
> Ah, I just noticed that your patch "ARM: imx: enable pinctrl dummy
> states" did not cover imx6q.  I think we should do the same for imx6q,
Yes, doing that was to force people to add pinctrl states in dts file
rather than using dummy state since mx6 supports pinctrl driver.

> so that we can separate dts update from the driver change.  When all
> imx6q boards' dts files get updated to have pins defined for the
> devices, we can then remove dummy state for imx6q.  Doing so will ease
> the pinctrl migration for those imx6q boards.
> 
Well, considering we have several mx6 boards, i think i can also be fine
with this way to ease the mx6q pinctrl migration.

> Will update your patch on my branch to have dummy state enabled for
> imx6q.
> 
Then go ahead.

Regards
Dong Aisheng

Re: [PATCH RESEND 3/5] can: flexcan: adopt pinctrl support

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 1078 bytes --]

Hello,

On 05/07/2012 02:53 AM, Shawn Guo wrote:
> Cc: linux-can@vger.kernel.org
> Cc: Marc Kleine-Budde <mkl@pengutronix.de>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---

It doesn't compile yet against net-next/master, which is based on v3.4-rc4:

/home/frogger/pengutronix/socketcan/linux/drivers/net/can/flexcan.c: In
function 'flexcan_probe':
/home/frogger/pengutronix/socketcan/linux/drivers/net/can/flexcan.c:937:
error: implicit declaration of function 'devm_pinctrl_get_select_default'
/home/frogger/pengutronix/socketcan/linux/drivers/net/can/flexcan.c:937:
warning: assignment makes pointer from integer without a cast

Which tree does this series depend on? If this should go over the
linux-can tree, I have to ask David first to merge this.

regards,
Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

Re: [PATCH RESEND 3/5] can: flexcan: adopt pinctrl support

[Shawn Guo]

On 7 May 2012 16:06, Marc Kleine-Budde <mkl@pengutronix.de> wrote:
> It doesn't compile yet against net-next/master, which is based on v3.4-rc4:
>
> /home/frogger/pengutronix/socketcan/linux/drivers/net/can/flexcan.c: In
> function 'flexcan_probe':
> /home/frogger/pengutronix/socketcan/linux/drivers/net/can/flexcan.c:937:
> error: implicit declaration of function 'devm_pinctrl_get_select_default'
> /home/frogger/pengutronix/socketcan/linux/drivers/net/can/flexcan.c:937:
> warning: assignment makes pointer from integer without a cast
>
> Which tree does this series depend on? If this should go over the
> linux-can tree, I have to ask David first to merge this.
>
Thanks for the response, Marc.  The patch depends on pinctrl tree and
a couple of other patches that will go through arm-soc tree, so I
would like to ask for your ack to have the patch go over arm-soc tree.

Regards,
Shawn

Re: [PATCH RESEND 3/5] can: flexcan: adopt pinctrl support

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 1376 bytes --]

On 05/07/2012 10:17 AM, Shawn Guo wrote:
> On 7 May 2012 16:06, Marc Kleine-Budde <mkl@pengutronix.de> wrote:
>> It doesn't compile yet against net-next/master, which is based on v3.4-rc4:
>>
>> /home/frogger/pengutronix/socketcan/linux/drivers/net/can/flexcan.c: In
>> function 'flexcan_probe':
>> /home/frogger/pengutronix/socketcan/linux/drivers/net/can/flexcan.c:937:
>> error: implicit declaration of function 'devm_pinctrl_get_select_default'
>> /home/frogger/pengutronix/socketcan/linux/drivers/net/can/flexcan.c:937:
>> warning: assignment makes pointer from integer without a cast
>>
>> Which tree does this series depend on? If this should go over the
>> linux-can tree, I have to ask David first to merge this.
>>
> Thanks for the response, Marc.  The patch depends on pinctrl tree and
> a couple of other patches that will go through arm-soc tree, so I
> would like to ask for your ack to have the patch go over arm-soc tree.

Fine with me. David, is this okay? Shawn, better wait for David's okay.

Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>

regards, Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]