From: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
To: santil@linux.vnet.ibm.com
Cc: anton@samba.org, benh@kernel.crashing.org, paulus@samba.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: ibmveth bug?
Date: Tue, 15 May 2012 10:01:41 -0700 [thread overview]
Message-ID: <20120515170141.GA14272@linux.vnet.ibm.com> (raw)
Hi Santiago,
Are you still working on ibmveth?
I've found a very sporadic bug with ibmveth in some testing. PAPR
requires that:
"Validate the Buffer Descriptor of the receive queue buffer (I/O
addresses for entire buffer length starting at the spec- ified I/O
address are translated by the RTCE table, length is a multiple of 16
bytes, and alignment is on a 16 byte boundary) else H_Parameter."
but from what I can tell ibmveth.c is not enforcing this last condition:
adapter->rx_queue.queue_addr =
kmalloc(adapter->rx_queue.queue_len, GFP_KERNEL);
...
adapter->rx_queue.queue_dma = dma_map_single(dev,
adapter->rx_queue.queue_addr, adapter->rx_queue.queue_len,
DMA_BIDIRECTIONAL);
...
rxq_desc.fields.address = adapter->rx_queue.queue_dma;
...
lpar_rc = ibmveth_register_logical_lan(adapter, rxq_desc,
mac_address);
netdev_err(netdev, "buffer TCE:0x%llx filter TCE:0x%llx rxq "
"desc:0x%llx MAC:0x%llx\n", adapter->buffer_list_dma,
adapter->filter_list_dma, rxq_desc.desc, mac_address);
And I got on one install attempt:
[ 39.978430] ibmveth 30000004: eth0: h_register_logical_lan failed with -4
[ 39.978449] ibmveth 30000004: eth0: buffer TCE:0x1000 filter TCE:0x10000 rxq desc:0x80006010000200a8 MAC:0x56754de8e904
rxq desc, as you can see is not 16byte aligned. kmalloc() only
guarantees 8-byte alignment (as does gcc, I think). Initially, I thought
we could just overallocate the queue_addr and ALIGN() down, but then we
would need to save the original kmalloc pointer in a new struct member
per rx_queue.
So a couple of questions:
1) Is my analysis accurate? :)
2) How gross would it be to save an extra pointer for every rx_queue?
3) Based upon 2), is it better to just go ahead and create our own
kmem_cache (which gets an alignment specified)?
For 3), I started coding this, but couldn't find a clean place to
allocate the kmem_cache itself, as the size of each object depends on
the run-time characteristics (afaict), but needs to be specified at
cache creation time. Any insight you could provide would be great!
Thanks,
Nish
--
Nishanth Aravamudan <nacc@us.ibm.com>
IBM Linux Technology Center
next reply other threads:[~2012-05-15 17:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-15 17:01 Nishanth Aravamudan [this message]
2012-07-20 22:41 ` ibmveth bug? Nishanth Aravamudan
2012-07-21 0:52 ` Benjamin Herrenschmidt
2012-07-23 19:03 ` Nishanth Aravamudan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120515170141.GA14272@linux.vnet.ibm.com \
--to=nacc@linux.vnet.ibm.com \
--cc=anton@samba.org \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=paulus@samba.org \
--cc=santil@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).