From mboxrd@z Thu Jan 1 00:00:00 1970 From: "George Spelvin" Subject: Re: NETDEV WATCHDOG: %s (%s): transmit queue %u timed out Date: 24 May 2012 08:46:07 -0400 Message-ID: <20120524124607.27031.qmail@science.horizon.com> References: <20120523223210.GA20536@electric-eye.fr.zoreil.com> Cc: davej@redhat.com, kernel-team@fedoraproject.org, linux@horizon.com, netdev@vger.kernel.org To: romieu@fr.zoreil.com Return-path: Received: from science.horizon.com ([71.41.210.146]:53857 "HELO science.horizon.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1753147Ab2EXMqJ (ORCPT ); Thu, 24 May 2012 08:46:09 -0400 In-Reply-To: <20120523223210.GA20536@electric-eye.fr.zoreil.com> Sender: netdev-owner@vger.kernel.org List-ID: Francois Romieu > You may try the attached patches on top of current -git. A complete dmesg > will be welcome. So will an 'ethtool -d eth0' if the device stops working. > > You did not label the problem as a serious one. Does it means that the > driver automatically recovers ? Same timeout, at 6h20m uptime (dmesg attached), System is 3.4.0 + some completely unrelated local patches (to serial port PPS drivers) + your two patches. System recovers, is operating normally. Thank you for your efforts! Initializing cgroup subsys cpu Linux version 3.4.0-00020-g3579858 ($USER@$HOST) (gcc version 4.7.0 (Debian 4.7.0-9) ) #156 SMP Wed May 23 22:24:39 EDT 2012 Command line: auto BOOT_IMAGE=Amd64 ro root=905 libata.fua=1 acpi_enforce_resources=lax k10temp.force=1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000093800 (usable) BIOS-e820: 0000000000093800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dffa0000 (usable) BIOS-e820: 00000000dffc0000 - 00000000dffce000 (ACPI data) BIOS-e820: 00000000dffce000 - 00000000dfff0000 (ACPI NVS) BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000220000000 (usable) NX (Execute Disable) protection: active DMI present. DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7376/MS-7376, BIOS V1.7 01/13/2009 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) ie820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x220000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFE0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000220000000 aka 8704M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xdffa0 max_arch_pfn = 0x400000000 found SMP MP-table at [ffff8800000ff780] ff780 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff880000091000] 91000 size 8192 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000dffa0000 0000000000 - 00c0000000 page 1G 00c0000000 - 00dfe00000 page 2M 00dfe00000 - 00dffa0000 page 4k kernel direct mapping tables up to dffa0000 @ 1fffd000-20000000 init_memory_mapping: 0000000100000000-0000000220000000 0100000000 - 0200000000 page 1G 0200000000 - 0220000000 page 2M kernel direct mapping tables up to 220000000 @ dff9e000-dffa0000 ACPI: RSDP 00000000000f9e30 00014 (v00 ACPIAM) ACPI: RSDT 00000000dffc0000 00038 (v01 011309 RSDT1044 20090113 MSFT 00000097) ACPI: FACP 00000000dffc0200 00084 (v02 011309 FACP1044 20090113 MSFT 00000097) ACPI: DSDT 00000000dffc0440 06E9B (v01 1ADNC 1ADNC001 00000001 INTL 20051117) ACPI: FACS 00000000dffce000 00040 ACPI: APIC 00000000dffc0390 0006C (v01 011309 APIC1044 20090113 MSFT 00000097) ACPI: MCFG 00000000dffc0400 0003C (v01 011309 OEMMCFG 20090113 MSFT 00000097) ACPI: OEMB 00000000dffce040 00071 (v01 011309 OEMB1044 20090113 MSFT 00000097) ACPI: HPET 00000000dffc72e0 00038 (v01 011309 OEMHPET 20090113 MSFT 00000097) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00220000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x00000093 0: 0x00000100 -> 0x000dffa0 0: 0x00100000 -> 0x00220000 On node 0 totalpages: 2096931 DMA zone: 64 pages used for memmap DMA zone: 2 pages reserved DMA zone: 3905 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 896992 pages, LIFO batch:31 Normal zone: 18432 pages used for memmap Normal zone: 1161216 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at dfffe000 (gap: dfffe000:1ff02000) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 23 pages/cpu @ffff88021fc00000 s72704 r0 d21504 u524288 pcpu-alloc: s72704 r0 d21504 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062113 Kernel command line: auto BOOT_IMAGE=Amd64 ro root=905 libata.fua=1 acpi_enforce_resources=lax k10temp.force=1 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ d4000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ d4000000 Memory: 8105124k/8912896k available (4126k kernel code, 525172k absent, 282600k reserved, 1952k data, 476k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:712 16 Console: colour VGA+ 80x50 console [tty0] enabled hpet clockevent registered Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using HPET reference calibration Detected 2500.164 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.32 BogoMIPS (lpj=25001640) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks LVT offset 0 assigned for vector 0xf9 using AMD E400 aware idle routine Freeing SMP alternatives: 12k freed ACPI: Core revision 20120320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. NMI watchdog: enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 NMI watchdog: enabled, takes one hw-pmu counter. System has AMD C1E enabled Switch to broadcast mode on CPU1 #2 NMI watchdog: enabled, takes one hw-pmu counter. Switch to broadcast mode on CPU2 #3 Ok. NMI watchdog: enabled, takes one hw-pmu counter. Switch to broadcast mode on CPU3 Brought up 4 CPUs Total of 4 processors activated (20001.31 BogoMIPS). Switch to broadcast mode on CPU0 xor: automatically using best checksumming function: generic_sse generic_sse: 9968.800 MB/sec xor: using function: generic_sse (9968.800 MB/sec) NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000e0000000 aka 3584M Fam 10h mmconf [mem 0xe0000000-0xefffffff] node 0 link 0: mmio [e0000000, efffffff] ==> none node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [e0000000, dfffffff] ==> none TOM2: 0000000220000000 aka 8704M bus: [00, 07] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xf0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x220000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access bio: create slab at 0 raid6: int64x1 2426 MB/s raid6: int64x2 2127 MB/s raid6: int64x4 2237 MB/s raid6: int64x8 1474 MB/s raid6: sse2x1 3546 MB/s raid6: sse2x2 5429 MB/s raid6: sse2x4 6551 MB/s raid6: using algorithm sse2x4 (6551 MB/s) ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Detected MSI hardware, enabling workarounds. ACPI: EC: Look up EC in DSDT ACPI: Executed 3 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] pci 0000:00:00.0: [1002:5956] type 00 class 0x060000 pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1002:597b] type 01 class 0x060400 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: [1002:597e] type 01 class 0x060400 pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: [1002:4380] type 00 class 0x010601 pci 0000:00:12.0: reg 10: [io 0x7000-0x7007] pci 0000:00:12.0: reg 14: [io 0x6000-0x6003] pci 0000:00:12.0: reg 18: [io 0x5000-0x5007] pci 0000:00:12.0: reg 1c: [io 0x4000-0x4003] pci 0000:00:12.0: reg 20: [io 0x3000-0x300f] pci 0000:00:12.0: reg 24: [mem 0xfe5ff800-0xfe5ffbff] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 pci 0000:00:13.0: reg 10: [mem 0xfe5fe000-0xfe5fefff] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 pci 0000:00:13.1: reg 10: [mem 0xfe5fd000-0xfe5fdfff] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 pci 0000:00:13.2: reg 10: [mem 0xfe5fc000-0xfe5fcfff] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 pci 0000:00:13.3: reg 10: [mem 0xfe5fb000-0xfe5fbfff] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 pci 0000:00:13.4: reg 10: [mem 0xfe5fa000-0xfe5fafff] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 pci 0000:00:13.5: reg 10: [mem 0xfe5ff000-0xfe5ff0ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0xfe5f4000-0xfe5f7fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 pci 0000:01:00.0: [1002:5b60] type 00 class 0x030000 pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfdffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xfe6f0000-0xfe6fffff 64bit] pci 0000:01:00.0: reg 20: [io 0x8000-0x80ff] pci 0000:01:00.0: reg 30: [mem 0xfe6c0000-0xfe6dffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: [1002:5b70] type 00 class 0x038000 pci 0000:01:00.1: reg 10: [mem 0xfe6e0000-0xfe6effff 64bit] pci 0000:01:00.1: supports D1 D2 pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0x8000-0x8fff] pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfdffffff 64bit pref] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 pci 0000:02:00.0: reg 10: [io 0x9800-0x98ff] pci 0000:02:00.0: reg 18: [mem 0xfe7ff000-0xfe7fffff 64bit] pci 0000:02:00.0: reg 30: [mem 0xfe7c0000-0xfe7dffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:00:05.0: PCI bridge to [bus 02-02] pci 0000:00:05.0: bridge window [io 0x9000-0x9fff] pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:03:00.0: [105a:3f20] type 00 class 0x010400 pci 0000:03:00.0: reg 10: [io 0xa800-0xa87f] pci 0000:03:00.0: reg 18: [io 0xa400-0xa4ff] pci 0000:03:00.0: reg 1c: [mem 0xfe8ff000-0xfe8fffff] pci 0000:03:00.0: reg 20: [mem 0xfe8c0000-0xfe8dffff] pci 0000:03:00.0: reg 24: [mem 0xfe8fc000-0xfe8fdfff] pci 0000:03:00.0: supports D1 pci 0000:00:09.0: PCI bridge to [bus 03-03] pci 0000:00:09.0: bridge window [io 0xa000-0xafff] pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:04:00.0: [1106:3044] type 00 class 0x0c0010 pci 0000:04:00.0: reg 10: [mem 0xfe9ff800-0xfe9fffff] pci 0000:04:00.0: reg 14: [io 0xc800-0xc87f] pci 0000:04:00.0: supports D2 pci 0000:04:00.0: PME# supported from D2 D3hot D3cold pci 0000:04:02.0: [1415:9501] type 00 class 0x070006 pci 0000:04:02.0: reg 10: [io 0xc400-0xc41f] pci 0000:04:02.0: reg 14: [mem 0xfe9fe000-0xfe9fefff] pci 0000:04:02.0: reg 18: [io 0xc000-0xc01f] pci 0000:04:02.0: reg 1c: [mem 0xfe9fd000-0xfe9fdfff] pci 0000:04:02.0: supports D2 pci 0000:04:02.0: PME# supported from D0 D2 D3hot pci 0000:04:02.1: [1415:9513] type 00 class 0x070101 pci 0000:04:02.1: reg 10: [io 0xb800-0xb807] pci 0000:04:02.1: reg 14: [io 0xb400-0xb407] pci 0000:04:02.1: reg 18: [io 0xb000-0xb01f] pci 0000:04:02.1: reg 1c: [mem 0xfe9fc000-0xfe9fcfff] pci 0000:04:02.1: supports D2 pci 0000:04:02.1: PME# supported from D0 D2 D3hot pci 0000:04:03.0: [1011:0024] type 01 class 0x060400 pci 0000:00:14.4: PCI bridge to [bus 04-05] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xb000-0xefff] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfebfffff] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) pci 0000:05:04.0: [1011:0019] type 00 class 0x020000 pci 0000:05:04.0: reg 10: [io 0xe800-0xe87f] pci 0000:05:04.0: reg 14: [mem 0xfebffc00-0xfebfffff] pci 0000:05:04.0: reg 30: [mem 0xfeb80000-0xfebbffff pref] pci 0000:05:05.0: [1011:0019] type 00 class 0x020000 pci 0000:05:05.0: reg 10: [io 0xe400-0xe47f] pci 0000:05:05.0: reg 14: [mem 0xfebff800-0xfebffbff] pci 0000:05:05.0: reg 30: [mem 0xfeb40000-0xfeb7ffff pref] pci 0000:05:06.0: [1011:0019] type 00 class 0x020000 pci 0000:05:06.0: reg 10: [io 0xe000-0xe07f] pci 0000:05:06.0: reg 14: [mem 0xfebff400-0xfebff7ff] pci 0000:05:06.0: reg 30: [mem 0xfeb00000-0xfeb3ffff pref] pci 0000:05:07.0: [1011:0019] type 00 class 0x020000 pci 0000:05:07.0: reg 10: [io 0xd800-0xd87f] pci 0000:05:07.0: reg 14: [mem 0xfebff000-0xfebff3ff] pci 0000:05:07.0: reg 30: [mem 0xfeac0000-0xfeafffff pref] pci 0000:04:03.0: PCI bridge to [bus 05-05] pci 0000:04:03.0: bridge window [io 0xd000-0xefff] pci 0000:04:03.0: bridge window [mem 0xfea00000-0xfebfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs *9) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered Advanced Linux Sound Architecture Driver Version 1.0.25. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] reserve RAM buffer: 0000000000093800 - 000000000009ffff reserve RAM buffer: 00000000dffa0000 - 00000000dfffffff hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000d0000-0x000dffff window] pnp 00:00: [mem 0xe0000000-0xdfffffff window disabled] pnp 00:00: [mem 0xf0000000-0xfebfffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [dma 4] pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [io 0x0070-0x0071] pnp 00:02: [irq 8] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: [io 0x0061] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:04: [io 0x00f0-0x00ff] pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x03f8-0x03ff] pnp 00:05: [irq 4] pnp 00:05: [dma 0 disabled] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:06: [io 0x03f0-0x03f5] pnp 00:06: [io 0x03f7] pnp 00:06: [irq 6] pnp 00:06: [dma 2] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:07: [mem 0xfed00000-0xfed003ff] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:08: [mem 0xfec00000-0xfec00fff] pnp 00:08: [mem 0xfee00000-0xfee00fff] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x003f] pnp 00:09: [io 0x0062-0x0063] pnp 00:09: [io 0x0065-0x006f] pnp 00:09: [io 0x0072-0x007f] pnp 00:09: [io 0x0080] pnp 00:09: [io 0x0084-0x0086] pnp 00:09: [io 0x0088] pnp 00:09: [io 0x008c-0x008e] pnp 00:09: [io 0x0090-0x009f] pnp 00:09: [io 0x00a2-0x00bf] pnp 00:09: [io 0x00b1] pnp 00:09: [io 0x00e0-0x00ef] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd0-0x0cd1] pnp 00:09: [io 0x0cd2-0x0cd3] pnp 00:09: [io 0x0cd4-0x0cd5] pnp 00:09: [io 0x0cd6-0x0cd7] pnp 00:09: [io 0x0cd8-0x0cdf] pnp 00:09: [io 0x0800-0x089f] pnp 00:09: [io 0x0b10-0x0b1f] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled] pnp 00:09: [io 0x0900-0x090f] pnp 00:09: [io 0x0910-0x091f] pnp 00:09: [io 0xfe00-0xfefe] pnp 00:09: [mem 0xffb80000-0xffbfffff] system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cd1] has been reserved system 00:09: [io 0x0cd2-0x0cd3] has been reserved system 00:09: [io 0x0cd4-0x0cd5] has been reserved system 00:09: [io 0x0cd6-0x0cd7] has been reserved system 00:09: [io 0x0cd8-0x0cdf] has been reserved system 00:09: [io 0x0800-0x089f] has been reserved system 00:09: [io 0x0b10-0x0b1f] has been reserved system 00:09: [io 0x0900-0x090f] has been reserved system 00:09: [io 0x0910-0x091f] has been reserved system 00:09: [io 0xfe00-0xfefe] has been reserved system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [io 0x0060] pnp 00:0a: [io 0x0064] pnp 00:0a: [irq 1] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:0b: [irq 12] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled] pnp 00:0c: [io 0x0600-0x06df] pnp 00:0c: [io 0x0ae0-0x0aef] system 00:0c: [io 0x0600-0x06df] has been reserved system 00:0c: [io 0x0ae0-0x0aef] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0d: [mem 0xe0000000-0xefffffff] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0e: [mem 0x00000000-0x0009ffff] pnp 00:0e: [mem 0x000c0000-0x000cffff] pnp 00:0e: [mem 0x000e0000-0x000fffff] pnp 00:0e: [mem 0x00100000-0xdfffffff] pnp 00:0e: [mem 0xfec00000-0xffffffff] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0e: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0e: disabling [mem 0x00100000-0xdfffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0x8000-0x8fff] pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfdffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 02-02] pci 0000:00:05.0: bridge window [io 0x9000-0x9fff] pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 03-03] pci 0000:00:09.0: bridge window [io 0xa000-0xafff] pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:04:03.0: PCI bridge to [bus 05-05] pci 0000:04:03.0: bridge window [io 0xd000-0xefff] pci 0000:04:03.0: bridge window [mem 0xfea00000-0xfebfffff] pci 0000:00:14.4: PCI bridge to [bus 04-05] pci 0000:00:14.4: bridge window [io 0xb000-0xefff] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfebfffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:01: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 0 [io 0xb000-0xefff] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfebfffff] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:04: resource 8 [mem 0xf0000000-0xfebfffff] pci_bus 0000:05: resource 0 [io 0xd000-0xefff] pci_bus 0000:05: resource 1 [mem 0xfea00000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ d4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture LVT offset 1 assigned for vector 0x400 IBS: LVT offset 1 assigned perf: AMD IBS detected (0x00000007) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 15959 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: duty_cycle spans bit 4 ACPI: processor limited to max C-state 1 Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS4: detected caps 00000700 should be 00000500 0000:04:02.0: ttyS4 at I/O 0xc400 (irq = 22) is a 16C950/954 ttyS1: detected caps 00000700 should be 00000500 0000:04:02.0: ttyS1 at I/O 0xc408 (irq = 22) is a 16C950/954 ttyS2: detected caps 00000700 should be 00000500 0000:04:02.0: ttyS2 at I/O 0xc410 (irq = 22) is a 16C950/954 ttyS3: detected caps 00000700 should be 00000500 0000:04:02.0: ttyS3 at I/O 0xc418 (irq = 22) is a 16C950/954 lp: driver loaded but no devices found Linux agpgart interface v0.103 PCI parallel port detected: 1415:9513, I/O at 0xb800(0x0), IRQ 23 parport0: PC-style at 0xb800, irq 23 [PCSPP] lp0: using parport0 (interrupt-driven). Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: module loaded Uniform Multi-Platform E-IDE driver atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00) atiixp 0000:00:14.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07 Probing IDE interface ide0... Refined TSC clocksource calibration: 2500.174 MHz. Switching to clocksource tsc hda: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache cdrom: Uniform CD-ROM driver Revision: 3.20 ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: MSI K9A2 Platinum: enabling 64bit DMA ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe5ff800 port 0xfe5ff900 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfe5ff800 port 0xfe5ff980 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe5ff800 port 0xfe5ffa00 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe5ff800 port 0xfe5ffa80 irq 22 ahci 0000:03:00.0: PDC42819 can only drive SATA devices with this driver ahci 0000:03:00.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode ahci 0000:03:00.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi4 : ahci scsi5 : ahci scsi6 : ahci scsi7 : ahci ata5: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc100 irq 17 ata6: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc180 irq 17 ata7: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc200 irq 17 ata8: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc280 irq 17 Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) tulip0: EEPROM default media type Autosense tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block tulip0: MII transceiver #1 config 3100 status 7869 advertising 01e1 net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebffc00, 00:80:c8:b9:c1:d5, IRQ 21 tulip1: EEPROM default media type Autosense tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block tulip1: MII transceiver #1 config 3100 status 7869 advertising 01e1 net eth1: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebff800, 00:80:c8:b9:c1:d6, IRQ 22 tulip2: EEPROM default media type Autosense tulip2: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block tulip2: MII transceiver #1 config 3100 status 7849 advertising 01e1 net eth2: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebff400, 00:80:c8:b9:c1:d7, IRQ 23 tulip3: EEPROM default media type Autosense tulip3: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block tulip3: MII transceiver #1 config 3100 status 7869 advertising 01e1 net eth3: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebff000, 00:80:c8:b9:c1:d8, IRQ 20 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: irq 40 for MSI/MSI-X r8169 0000:02:00.0: eth4: RTL8168b/8111b at 0xffffc90000020000, 00:21:85:16:51:7f, XID 18000000 IRQ 40 r8169 0000:02:00.0: eth4: jumbo features [frames: 4080 bytes, tx checksumming: ko] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe5ff000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe5fe000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe5fd000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe5fc000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe5fb000 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata7: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133 ata3.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata2.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata5.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata6.00: configured for UDMA/133 ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata2.00: SB600 AHCI: limiting to 255 sectors per cmd scsi 0:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 ata2.00: configured for UDMA/133 ata5.00: configured for UDMA/133 sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 1:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 scsi 2:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 scsi 3:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 4:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 scsi 5:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 5:0:0:0: [sdf] Write Protect is off sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 10 sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA sdf: sdf1 sd 5:0:0:0: [sdf] Attached SCSI disk sdb: sdb1 sdb2 sdb3 sdb4 sd 1:0:0:0: [sdb] Attached SCSI disk sdc: sdc1 sdc2 sdc3 sdc4 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe5fa000 sd 2:0:0:0: [sdc] Attached SCSI disk sdd: sdd1 sdd2 sdd3 sdd4 sd 3:0:0:0: [sdd] Attached SCSI disk sda: sda1 sda2 sda3 sda4 sde: sde1 sde2 sde3 sde4 sd 0:0:0:0: [sda] Attached SCSI disk sd 4:0:0:0: [sde] Attached SCSI disk hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core usbcore: registered new interface driver pl2303 USB Serial support registered for pl2303 i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs i2c /dev entries driver ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251) ACPI: This conflict may cause random problems and system instability ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 pps_ldisc: PPS line discipline registered f71882fg: Found f71882fg chip at 0x600, revision 32 ACPI Warning: 0x0000000000000600-0x0000000000000607 SystemIO conflicts with Region \HMOR 1 (20120320/utaddress-251) ACPI: This conflict may cause random problems and system instability ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode f71882fg f71882fg.1536: Fan: 4 is in duty-cycle mode k10temp 0000:00:18.3: unreliable CPU thermal sensor; check erratum 319 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 EDAC MC: Ver: 2.1.0 AMD64 EDAC driver v3.4.0 EDAC amd64: DRAM ECC disabled. EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver GACT probability on netem: version 1.3 u32 classifier Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. NF_TPROXY: Transparent proxy support initialized, version 4.1.0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. ip_set: protocol 6 IPv4 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP: bic registered TCP: cubic registered TCP: westwood registered TCP: highspeed registered TCP: hybla registered TCP: htcp registered TCP: vegas registered TCP: veno registered TCP: scalable registered TCP: lp registered TCP: yeah registered TCP: illinois registered Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered 8021q: 802.1Q VLAN Support v1.8 registered taskstats version 1 rtc_cmos 00:02: setting system clock to 2012-05-24 02:27:33 UTC (1337826453) powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor (4 cpu cores) (version 2.20.00) [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [Firmware Bug]: powernow-k8: Try again with latest BIOS. ALSA device list: #0: HDA ATI SB at 0xfe5f4000 irq 16 usb 6-2: new low-speed USB device number 2 using ohci_hcd input: HID 0430:0100 as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1 generic-usb 0003:0430:0100.0001: input: USB HID v1.00 Mouse [HID 0430:0100] on usb-0000:00:13.4-2/input0 input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 20 and added 20 devices. md: autorun ... md: considering sde4 ... md: adding sde4 ... md: sde3 has different UUID to sde4 md: sde2 has different UUID to sde4 md: sde1 has different UUID to sde4 md: adding sda4 ... md: sda3 has different UUID to sde4 md: sda2 has different UUID to sde4 md: sda1 has different UUID to sde4 md: adding sdd4 ... md: sdd3 has different UUID to sde4 md: sdd2 has different UUID to sde4 md: sdd1 has different UUID to sde4 md: adding sdc4 ... md: sdc3 has different UUID to sde4 md: sdc2 has different UUID to sde4 md: sdc1 has different UUID to sde4 md: adding sdb4 ... md: sdb3 has different UUID to sde4 md: sdb2 has different UUID to sde4 md: sdb1 has different UUID to sde4 md: created md6 md: bind md: bind md: bind md: bind md: bind md: running: bio: create slab at 1 md/raid:md6: device sde4 operational as raid disk 4 md/raid:md6: device sda4 operational as raid disk 0 md/raid:md6: device sdd4 operational as raid disk 3 md/raid:md6: device sdc4 operational as raid disk 2 md/raid:md6: device sdb4 operational as raid disk 1 md/raid:md6: allocated 5350kB md/raid:md6: raid level 5 active with 5 out of 5 devices, algorithm 2 RAID conf printout: --- level:5 rd:5 wd:5 disk 0, o:1, dev:sda4 disk 1, o:1, dev:sdb4 disk 2, o:1, dev:sdc4 disk 3, o:1, dev:sdd4 disk 4, o:1, dev:sde4 created bitmap (173 pages) for device md6 md6: bitmap initialized from disk: read 11/11 pages, set 0 of 354293 bits md6: detected capacity change from 0 to 1486011498496 md: considering sde3 ... md: adding sde3 ... md: sde2 has different UUID to sde3 md: sde1 has different UUID to sde3 md: adding sda3 ... md: sda2 has different UUID to sde3 md: sda1 has different UUID to sde3 md: sdd3 has different UUID to sde3 md: sdd2 has different UUID to sde3 md: sdd1 has different UUID to sde3 md: sdc3 has different UUID to sde3 md: sdc2 has different UUID to sde3 md: sdc1 has different UUID to sde3 md: adding sdb3 ... md: sdb2 has different UUID to sde3 md: sdb1 has different UUID to sde3 md: created md7 md: bind md: bind md: bind md: running: md/raid1:md7: active with 2 out of 2 mirrors md7: detected capacity change from 0 to 6144196608 md: considering sde2 ... RAID1 conf printout: --- wd:2 rd:2 disk 0, wo:0, o:1, dev:sda3 disk 1, wo:0, o:1, dev:sdb3 md: adding sde2 ... md: sde1 has different UUID to sde2 md: adding sda2 ... md: sda1 has different UUID to sde2 md: sdd3 has different UUID to sde2 md: adding sdd2 ... md: sdd1 has different UUID to sde2 md: sdc3 has different UUID to sde2 md: adding sdc2 ... md: sdc1 has different UUID to sde2 md: adding sdb2 ... md: sdb1 has different UUID to sde2 md: created md5 md: bind md: bind md: bind md: bind md: bind md: running: md/raid10:md5: active with 4 out of 4 devices created bitmap (173 pages) for device md5 md5: bitmap initialized from disk: read 11/11 pages, set 0 of 354293 bits md5: detected capacity change from 0 to 743005749248 md: considering sde1 ... RAID10 conf printout: --- wd:4 rd:4 disk 0, wo:0, o:1, dev:sda2 disk 1, wo:0, o:1, dev:sdb2 disk 2, wo:0, o:1, dev:sdc2 disk 3, wo:0, o:1, dev:sdd2 md: adding sde1 ... md: adding sda1 ... md: sdd3 has different UUID to sde1 md: adding sdd1 ... md: sdc3 has different UUID to sde1 md: adding sdc1 ... md: adding sdb1 ... md: created md0 md: bind md: bind md: bind md: bind md: bind md: running: md/raid1:md0: active with 5 out of 5 mirrors md0: detected capacity change from 0 to 1003356160 md: considering sdd3 ... md: adding sdd3 ... md: adding sdc3 ... md: created md8 md: bind md: bind md: running: md/raid1:md8: active with 2 out of 2 mirrors md8: detected capacity change from 0 to 6144196608 md: ... autorun DONE. md5: unknown partition table kjournald starting. Commit interval 5 seconds EXT3-fs (md5): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device 9:5. Freeing unused kernel memory: 476k freed mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! md8: unknown partition table mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! md6: unknown partition table mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! md7: unknown partition table md0: udevd[1132]: renamed network interface eth4 to inside udevd[1151]: renamed network interface eth0 to cable udevd[1141]: renamed network interface eth1 to dmz udevd[1155]: renamed network interface eth2 to t1 udevd[1156]: renamed network interface eth3 to spare hda: UDMA/33 mode selected ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata5.00: configured for UDMA/133 ata5: EH complete ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata5.00: configured for UDMA/133 ata5: EH complete ata6.00: configured for UDMA/133 ata6: EH complete hda: UDMA/33 mode selected ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata5.00: configured for UDMA/133 ata5: EH complete ata6.00: configured for UDMA/133 ata6: EH complete Adding 6000188k swap on /dev/md7. Priority:1 extents:1 across:6000188k Adding 6000188k swap on /dev/md8. Priority:1 extents:1 across:6000188k scsi_verify_blk_ioctl: 562 callbacks suppressed mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! EXT3-fs (md5): using internal journal mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! kjournald starting. Commit interval 5 seconds EXT3-fs (md6): using internal journal EXT3-fs (md6): mounted filesystem with writeback data mode EXT4-fs (sdf1): mounted filesystem with writeback data mode. Opts: data=writeback r8169 0000:02:00.0: inside: link down r8169 0000:02:00.0: inside: link down NOHZ: local_softirq_pending 08 ADDRCONF(NETDEV_UP): inside: link is not ready r8169 0000:02:00.0: inside: link up ADDRCONF(NETDEV_CHANGE): inside: link becomes ready net dmz: Setting full-duplex based on MII#1 link partner capability of 45e1 net cable: Setting full-duplex based on MII#1 link partner capability of 41e1 cable: no IPv6 routers present dmz: no IPv6 routers present inside: no IPv6 routers present postgres (4955): /proc/4955/oom_adj is deprecated, please use /proc/4955/oom_score_adj instead. pps pps0: new PPS source serial3 at ID 0 pps pps0: source "/dev/ttyS3" added pps pps1: new PPS source serial4 at ID 1 pps pps1: source "/dev/ttyS4" added device cable entered promiscuous mode device dmz entered promiscuous mode UDP: bad checksum. From yyy.yy.yyy.yy:1215 to xx.xxx.xx.xxx:62901 ulen 38 UDP: short packet: From zzz.zzz.zz.zz:1400 49320/143 to xx.xxx.xx.xxx:6881 ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0xe9/0x15c() Hardware name: MS-7376 NETDEV WATCHDOG: inside (r8169): transmit queue 0 timed out Pid: 0, comm: swapper/3 Not tainted 3.4.0-00020-g3579858 #156 Call Trace: [] ? dev_watchdog+0xe9/0x15c [] ? warn_slowpath_common+0x71/0x85 [] ? netif_tx_lock+0x7a/0x7a [] ? warn_slowpath_fmt+0x45/0x4a [] ? netif_tx_lock+0x67/0x7a [] ? dev_watchdog+0xe9/0x15c [] ? run_timer_softirq+0x17e/0x20b [] ? __do_softirq+0x80/0x102 [] ? call_softirq+0x1c/0x30 [] ? do_softirq+0x2c/0x60 [] ? irq_exit+0x3a/0x91 [] ? do_IRQ+0x81/0x97 [] ? common_interrupt+0x67/0x67 [] ? default_idle+0x1e/0x32 [] ? amd_e400_idle+0xb7/0xd4 [] ? cpu_idle+0x58/0x98 ---[ end trace 14c35d45980e4004 ]--- r8169 0000:02:00.0: inside: link up